| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| Wasmtime is a runtime for WebAssembly. From 32.0.0 to before 36.0.7, 42.0.2, and 43.0.1, Wasmtime's Cranelift compilation backend contains a bug on aarch64 when performing a certain shape of heap accesses which means that the wrong address is accessed. When combined with explicit bounds checks a guest WebAssembly module this can create a situation where there are two diverging computations for the same address: one for the address to bounds-check and one for the address to load. This difference in address being operated on means that a guest module can pass a bounds check but then load a different address. Combined together this enables an arbitrary read/write primitive for guest WebAssembly when accesssing host memory. This is a sandbox escape as guests are able to read/write arbitrary host memory. This vulnerability has a few ingredients, all of which must be met, for this situation to occur and bypass the sandbox restrictions. This miscompiled shape of load only occurs on 64-bit WebAssembly linear memories, or when Config::wasm_memory64 is enabled. 32-bit WebAssembly is not affected. Spectre mitigations or signals-based-traps must be disabled. When spectre mitigations are enabled then the offending shape of load is not generated. When signals-based-traps are disabled then spectre mitigations are also automatically disabled. The specific bug in Cranelift is a miscompile of a load of the shape load(iadd(base, ishl(index, amt))) where amt is a constant. The amt value is masked incorrectly to test if it's a certain value, and this incorrect mask means that Cranelift can pattern-match this lowering rule during instruction selection erroneously, diverging from WebAssembly's and Cranelift's semantics. This incorrect lowering would, for example, load an address much further away than intended as the correct address's computation would have wrapped around to a smaller value insetad. This vulnerability is fixed in 36.0.7, 42.0.2, and 43.0.1. |
| AIOHTTP is an asynchronous HTTP client/server framework for asyncio and Python. Prior to version 3.13.4, on Windows the static resource handler may expose information about a NTLMv2 remote path. This issue has been patched in version 3.13.4. |
| AIOHTTP is an asynchronous HTTP client/server framework for asyncio and Python. Prior to version 3.13.4, a response with an excessive number of multipart headers may be allowed to use more memory than intended, potentially allowing a DoS vulnerability. This issue has been patched in version 3.13.4. |
| AIOHTTP is an asynchronous HTTP client/server framework for asyncio and Python. Prior to version 3.13.4, for some multipart form fields, aiohttp read the entire field into memory before checking client_max_size. This issue has been patched in version 3.13.4. |
| Wasmtime is a runtime for WebAssembly. From 25.0.0 to before 36.0.7, 42.0.2, and 43.0.1, Wasmtime with its Winch (baseline) non-default compiler backend may allow properly constructed guest Wasm to access host memory outside of its linear-memory sandbox. This vulnerability requires use of the Winch compiler (-Ccompiler=winch). By default, Wasmtime uses its Cranelift backend, not Winch. With Winch, the same incorrect assumption is present in theory on both aarch64 and x86-64. The aarch64 case has an observed-working proof of concept, while the x86-64 case is theoretical and may not be reachable in practice. This Winch compiler bug can allow the Wasm guest to access memory before or after the linear-memory region, independently of whether pre- or post-guard regions are configured. The accessible range in the initial bug proof-of-concept is up to 32KiB before the start of memory, or ~4GiB after the start of memory, independently of the size of pre- or post-guard regions or the use of explicit or guard-region-based bounds checking. However, the underlying bug assumes a 32-bit memory offset stored in a 64-bit register has its upper bits cleared when it may not, and so closely related variants of the initial proof-of-concept may be able to access truly arbitrary memory in-process. This could result in a host process segmentation fault (DoS), an arbitrary data leak from the host process, or with a write, potentially an arbitrary RCE. This vulnerability is fixed in 36.0.7, 42.0.2, and 43.0.1. |
| CrewAI contains a arbitrary local file read vulnerability in the JSON loader tool that reads files without path validation, enabling access to files on the server. |
| CrewAI does not properly check that Docker is still running during runtime, and will fall back to a sandbox setting that allows for RCE exploitation. |
| CrewAI contains a server-side request forgery vulnerability that enables content acquisition from internal and cloud services, facilitated by the RAG search tools not properly validating URLs provided at runtime. |
| Wasmtime is a runtime for WebAssembly. From 28.0.0 to before 36.0.7, 42.0.2, and 43.0.1, Wasmtime's implementation of its pooling allocator contains a bug where in certain configurations the contents of linear memory can be leaked from one instance to the next. The implementation of resetting the virtual memory permissions for linear memory used the wrong predicate to determine if resetting was necessary, where the compilation process used a different predicate. This divergence meant that the pooling allocator incorrectly deduced at runtime that resetting virtual memory permissions was not necessary while compile-time determine that virtual memory could be relied upon. The pooling allocator must be in use, Config::memory_guard_size configuration option must be 0, Config::memory_reservation configuration must be less than 4GiB, and pooling allocator must be configured with max_memory_size the same as the memory_reservation value in order to exploit this vulnerability. If all of these conditions are applicable then when a linear memory is reused the VM permissions of the previous iteration are not reset. This means that the compiled code, which is assuming out-of-bounds loads will segfault, will not actually segfault and can read the previous contents of linear memory if it was previously mapped. This represents a data leakage vulnerability between guest WebAssembly instances which breaks WebAssembly's semantics and additionally breaks the sandbox that Wasmtime provides. Wasmtime is not vulnerable to this issue with its default settings, nor with the default settings of the pooling allocator, but embeddings are still allowed to configure these values to cause this vulnerability. This vulnerability is fixed in 36.0.7, 42.0.2, and 43.0.1. |
| Wasmtime is a runtime for WebAssembly. From 25.0.0 to before 36.0.7, 42.0.2, and 43.0.1, Wasmtime's Winch compiler backend contains a bug where translating the table.grow operator causes the result to be incorrectly typed. For 32-bit tables this means that the result of the operator, internally in Winch, is tagged as a 64-bit value instead of a 32-bit value. This invalid internal representation of Winch's compiler state compounds into further issues depending on how the value is consumed. The primary consequence of this bug is that bytes in the host's address space can be stored/read from. This is only applicable to the 16 bytes before linear memory, however, as the only significant return value of table.grow that can be misinterpreted is -1. The bytes before linear memory are, by default, unmapped memory. Wasmtime will detect this fault and abort the process, however, because wasm should not be able to access these bytes. Overall this this bug in Winch represents a DoS vector by crashing the host process, a correctness issue within Winch, and a possible leak of up to 16-bytes before linear memory. Wasmtime's default compiler is Cranelift, not Winch, and Wasmtime's default settings are to place guard pages before linear memory. This means that Wasmtime's default configuration is not affected by this issue, and when explicitly choosing Winch Wasmtime's otherwise default configuration leads to a DoS. Disabling guard pages before linear memory is required to possibly leak up to 16-bytes of host data. This vulnerability is fixed in 36.0.7, 42.0.2, and 43.0.1. |
| Wasmtime is a runtime for WebAssembly. Prior to 24.0.7, 36.0.7, 42.0.2, and 43.0.1, Wasmtime's implementation of transcoding strings between components contains a bug where the return value of a guest component's realloc is not validated before the host attempts to write through the pointer. This enables a guest to cause the host to write arbitrary transcoded string bytes to an arbitrary location up to 4GiB away from the base of linear memory. These writes on the host could hit unmapped memory or could corrupt host data structures depending on Wasmtime's configuration. Wasmtime by default reserves 4GiB of virtual memory for a guest's linear memory meaning that this bug will by default on hosts cause the host to hit unmapped memory and abort the process due to an unhandled fault. Wasmtime can be configured, however, to reserve less memory for a guest and to remove all guard pages, so some configurations of Wasmtime may lead to corruption of data outside of a guest's linear memory, such as host data structures or other guests's linear memories. This vulnerability is fixed in 24.0.7, 36.0.7, 42.0.2, and 43.0.1. |
| Adobe Experience Manager versions 6.5.23 and earlier are affected by a stored Cross-Site Scripting (XSS) vulnerability that could be abused by an attacker to inject malicious scripts into vulnerable form fields. Malicious JavaScript may be executed in a victim’s browser when they browse to the page containing the vulnerable field. |
| A flaw was found in org.keycloak/keycloak-model-storage-service. The KeycloakRealmImport custom resource substitutes placeholders within imported realm documents, potentially referencing environment variables. This substitution process
allows for injection attacks when crafted realm documents are processed. An attacker can leverage this to inject malicious content during the realm import procedure. This can lead to unintended consequences within the Keycloak environment. |
| A vulnerability was determined in cmake 4.1.20250725-gb5cce23. This affects the function cmForEachFunctionBlocker::ReplayItems of the file cmForEachCommand.cxx. This manipulation causes reachable assertion. The attack needs to be launched locally. The exploit has been publicly disclosed and may be utilized. Patch name: 37e27f71bc356d880c908040cd0cb68fa2c371b8. It is suggested to install a patch to address this issue. |
| There exists a TOCTOU race condition in TvSettings AppRestrictionsFragment.java that lead to start of attacker supplied activity in Settings’ context, i.e. system-uid context, thus lead to launchAnyWhere. The core idea is to utilize the time window between the check of Intent and the use to Intent to change the target component’s state, thus bypass the original security sanitize function. |
| A privilege escalation flaw from host to domain administrator was found in FreeIPA. This vulnerability is similar to CVE-2025-4404, where it fails to validate the uniqueness of the krbCanonicalName. While the previously released version added validations for the admin@REALM credential, FreeIPA still does not validate the root@REALM canonical name, which can also be used as the realm administrator's name. This flaw allows an attacker to perform administrative tasks over the REALM, leading to access to sensitive data and sensitive data exfiltration. |
| The installer of INZONE Hub 1.0.10.3 to 1.0.17.0 contains an issue with the DLL search path, which may lead to insecurely loading Dynamic Link Libraries. As a result, arbitrary code may be executed with the privilege of the user invoking the installer. |
| Pega Platform versions 8.1.0 through 25.1.1 are affected by a Stored Cross-site Scripting vulnerability in a user interface component. Requires an administrative user and given extensive access rights, impact to Confidentiality and Integrity are low. |
| Quadient DS-700 iQ devices through 2025-09-30 might have a race condition during the quick clicking of (in order) the Question Mark button, the Help Button, the About button, and the Help Button, leading to a transition out of kiosk mode into local administrative access. NOTE: the reporter indicates that the "behavior was observed sporadically" during "limited time on the client site," making it not "possible to gain more information about the specific kiosk mode crashing issue," and the only conclusion was "there appears to be some form of race condition." Accordingly, there can be doubt that a reproducible cybersecurity vulnerability was identified; sporadic software crashes can also be caused by a hardware fault on a single device (for example, transient RAM errors). The reporter also describes a variety of other issues, including initial access via USB because of the absence of a "lock-pick resistant locking solution for the External Controller PC cabinet," which is not a cybersecurity vulnerability (section 4.1.5 of the CNA Operational Rules). Finally, it is unclear whether the device or OS configuration was inappropriate, given that the risks are typically limited to insider threats within the mail operations room of a large company. |
| serverless-dns is a RethinkDNS resolver that deploys to Cloudflare Workers, Deno Deploy, Fastly, and Fly.io. Versions through abd including 0.1.30 have a vulnerability where the pr.yml GitHub Action interpolates in an unsafe manner untrusted input, specifically the github.event.pull_request.head.repo.clone_url and github.head_ref, to a command in the runner. Due to the action using the pull_request_target trigger it has permissive permissions by default. An unauthorized attacker can exploit this vulnerability to push arbitrary data to the repository. The subsequent impact on the end-user is executing the attackers' code when running serverless-dns. This is fixed in commit c5537dd, and expected to be released in 0.1.31. |
