| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
RDMA/nldev: validate dynamic counter attribute length
RDMA_NLDEV_ATTR_STAT_HWCOUNTERS is a nested attribute whose children are
consumed directly with nla_get_u32(). The top-level policy validates only
the container, so it does not establish the fixed shape of each child.
Require every child payload to be exactly one u32 before reading it. |
| In the Linux kernel, the following vulnerability has been resolved:
RDMA/erdma: Fix CEQ tasklet use-after-free on removal
Each CEQ interrupt handler only schedules eqc->tasklet. The tasklet calls
erdma_ceq_completion_handler(), which reads the DMA-coherent EQ ring
through get_next_valid_eqe() and updates eq->dbrec through notify_eq().
erdma_ceqs_uninit() frees each CEQ IRQ and then destroys its EQ.
free_irq() prevents another hard IRQ and waits for an in-flight handler,
but it does not drain a tasklet that the handler already scheduled. The
tasklet can therefore access eq->qbuf or eq->dbrec after
erdma_eq_destroy() frees them.
Clearing ceq_cb->ready does not synchronize with a tasklet that already
passed the check at the start of erdma_ceq_completion_handler().
Kill the tasklet after free_irq(), when no handler can schedule it again,
and before erdma_ceq_uninit_one() releases the EQ buffers. |
| In the Linux kernel, the following vulnerability has been resolved:
RDMA/core: Fix potential use after free in counter_release()
When accessing a counter via the netlink path the only synchronization
mechanism for the said counter is rdma_restrack_get().
Currently, rdma_restrack_del() is invoked at the end of
counter_release(), which is too late, since by that point
vendor-specific resources associated with the counter might already be
freed. This can leave a short window where the counter remains
accessible through restrack, leading to a potential use-after-free.
Fix this by moving the rdma_restrack_del() call to be before the
freeing of the vendor-specific resources, ensuring that the counter is
removed from restrack before its internal resources are released.
This guarantees that no new users hold references to a counter that is
in the process of destruction. |
| In the Linux kernel, the following vulnerability has been resolved:
firmware: arm_scmi: Fix requested device removal race
scmi_protocol_device_unrequest() drops scmi_requested_devices_mtx while
notifying listeners but continues to retain the per-protocol list head.
When two SCMI drivers for the same protocol unregister concurrently, one
thread can remove the final request and free the list head while the other
is running its notifier. The latter then dereferences the freed list head
after reacquiring the mutex and can free it a second time.
Complete the list and IDR updates, including freeing an empty list head,
before dropping the mutex. Keep the blocking notifier outside the critical
section and retain only the detached request across the callback. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: ath11k: Avoid buffer overread in ath11k_wmi_tlv_op_rx()
Currently, in ath11k_wmi_tlv_op_rx(), the firmware buffer is read
without first verifying that the buffer has enough data to hold a
header. This could result in a buffer overread.
Add an upfront length check before dereferencing skb->data as a
wmi_cmd_hdr. The check is placed before the trace_ath11k_wmi_event()
call to preserve the existing trace semantics (tracing the full raw
WMI event including the header), unlike the analogous ath12k fix which
could use skb_pull_data() directly.
Compile tested only. |
| In the Linux kernel, the following vulnerability has been resolved:
RDMA/bnxt_re: Clear VM_MAYWRITE on DBR/toggle page mmap
bnxt_re_mmap() rejects VM_WRITE for the DBR_PAGE and TOGGLE_PAGE mmap
flags, but a read-only mapping can still retain VM_MAYWRITE. nd later
be upgraded with mprotect(PROT_WRITE). This can bypass the write check
that only runs at mmap time.
Clear VM_MAYWRITE before vm_insert_page() in the shared DBR/toggle-page
branch, matching the existing policy that userspace writes are not
expected for these pages. |
| In the Linux kernel, the following vulnerability has been resolved:
cxl/region: Fix use-after-free in find_pos_and_ways() error path
The error path releases its reference to a switch decoder before
logging an error that includes the decoder name. If the released
reference is the last one, the decoder can be freed before the error
message accesses its name.
Drop the reference after the error is reported. |
| In the Linux kernel, the following vulnerability has been resolved:
scsi: ufs: debugfs: Reserve space for a string terminator
ufs_saved_err_write() copies user input into a zero-initialized stack
buffer and passes it to kstrtoint(). A write that fills the entire buffer
overwrites its only terminator.
Reject an input whose length leaves no room for the trailing NUL. |
| In the Linux kernel, the following vulnerability has been resolved:
crypto: keembay - Initialize completion before requesting IRQ
kmb_ocs_aes_probe() requests the device IRQ before initializing
irq_completion. Once the handler is registered it can run immediately,
and ocs_aes_irq_handler() unconditionally calls complete(). An
interrupt in this window would therefore use an uninitialized
completion.
Initialize the completion before requesting the IRQ, as the sibling
OCS HCU and ECC drivers already do. |
| In the Linux kernel, the following vulnerability has been resolved:
nilfs2: fix BUG in nilfs_copy_dirty_pages() on dirty state mismatch
Syzbot reported a kernel BUG triggered within nilfs_copy_dirty_pages(),
which copies dirty DAT file folios/pages to its shadow page cache. The
BUG occurs when a retrieved dirty folio/page unexpectedly loses its
'dirty' status.
This issue arises because, since the commit referenced below, the 'dirty'
flag of a folio/page can be cleared asynchronously after the filesystem
detects metadata corruption and transitions to read-only mode.
Resolve the issue by returning an -EROFS error if the filesystem has
transitioned to read-only mode. Also change the behavior to issue a
kernel warning only once instead of triggering a kernel BUG when this
unexpected 'dirty' state is detected while the filesystem is not in
read-only mode. |
| In the Linux kernel, the following vulnerability has been resolved:
RDMA/cxgb4: free STAG index when TPT entry write fails
write_tpt_entry() allocates a new STAG index with c4iw_get_resource() and
bumps stats.stag.cur before programming the entry. When
write_adapter_mem() fails, it returns the error without releasing the index
or reversing the statistic. No MR is inserted into rhp->mrs, so
deregistration never reclaims it, leaking the index until device teardown.
Record whether this call allocated the index and, on a failed write, return
it to tpt_table and decrement stats.stag.cur. Key the rollback on both the
write error and that flag, not the error alone: a non-reset update carries
a caller-owned STAG that this call did not allocate and must not free. |
| In the Linux kernel, the following vulnerability has been resolved:
nvme-fc: unmap cmd_iu DMA on rsp_iu mapping failure in init_request
__nvme_fc_init_request() maps cmd_iu and then rsp_iu for DMA. If the
rsp_iu mapping fails, the original code only recorded the error and fell
through: it left the already-mapped cmd_iu unmapped and still marked the
op as FCPOP_STATE_IDLE before returning. Since blk-mq does not call
.exit_request() when .init_request() fails, the cmd_iu mapping is leaked
for every op whose rsp_iu mapping fails.
Jump to an error path on rsp_iu mapping failure that unmaps cmd_iu and
returns the error without marking the op idle, so it stays in the
FCPOP_STATE_UNINIT state set by the initial memset(). |
| In the Linux kernel, the following vulnerability has been resolved:
power: supply: isp1704_charger: cancel work on remove
The USB notifier and initial VBUS detection can schedule isp->work. The
remove path unregisters the notifier and power supply, but does not wait
for queued or running work before tearing down the power supply state.
Cancel the work after unregistering the notifier. Do this before
unregistering the power supply.
This issue was found by a static analysis tool. |
| In the Linux kernel, the following vulnerability has been resolved:
power: supply: sc2731_charger: cancel work on remove
The USB notifier and initial charger detection can schedule info->work.
The remove path unregisters the notifier, but does not cancel queued or
running work before the devm-allocated driver data is released.
Set the platform drvdata used by remove, then cancel the work after
unregistering the notifier.
This issue was found by a static analysis tool. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: mt76: fix non-AQL packet accounting for MLO stations
__mt76_tx_queue_skb() overrides the wcid passed by the driver with
sta->drv_priv, so the wcid might incorrectly be changed after TX,
causing wcid->non_aql_packets to be counted on the wrong wcid. For
example, on the AP side, if a station's setup link is the 5G link and
the station uses 2G to transmit a frame, the value of non_aql_packets
is increased on the 5G wcid but decreased on the 2G wcid. Once the
inflated counter exceeds MT_MAX_NON_AQL_PKT, the TX scheduler
permanently refuses to service the station.
Drop the reassignment and account on the wcid used for transmission.
This also records the actual wcid in the queue entry. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: mt76: mt7996: bound TLV walk in mt7996_mcu_get_chip_config
The response TLV loop advanced by tlv->len without a minimum, so a
theoretical firmware response containing a zero-length TLV could spin
forever, hanging the CPU during device probe.
The u32 payload was also read without bounds checking.
Reject a short fixed field, stop on a TLV whose length underruns the
header or overruns the skb. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: mt76: mt7996: reserve space for the CSA-abort countdown TLV
When a CSA countdown is active, mt7996_mcu_beacon_cntdwn() emits two
bss_bcn_cntdwn_tlv entries (the CSA countdown and the CCA-abort BCC), but
MT7996_BEACON_UPDATE_SIZE only reserved one. With MBSSID enabled and a
near-maximum beacon template the extra 8 bytes could push the offload
command past MT7996_MAX_BSS_OFFLOAD_SIZE and trigger skb_over_panic().
Reserve room for both countdown TLVs. |
| In the Linux kernel, the following vulnerability has been resolved:
ACPI: processor: Unregister cpufreq notifier on init failure
acpi_processor_driver_init() registers the cpufreq policy notifier before
registering the ACPI processor driver and setting up CPU hotplug state.
If driver_register() or cpuhp_setup_state() fails, the error path only
unregisters the ACPI processor driver and the idle driver. The cpufreq
notifier remains registered even though initialization failed.
Mirror the module exit path on the init failure path and unregister the
cpufreq notifier when it has been registered. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/msm/dsi: Drop dev_pm_opp_set_rate(0)
dev_pm_opp_set_rate(0) removes the vote specified in required-opps but
does not actually park the clock, making it run without the necessary
power backing. Drop the explicit call to it.
Every call site of ops->link_clk_disable() is followed by
pm_runtime_put(), so the power vote will be rescinded if deemed safe.
Patchwork: https://patchwork.freedesktop.org/patch/742783/ |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: mt76: mt7915: release hif2 reference on probe IRQ failure
The hif2 reference obtained by mt7915_pci_init_hif2() is only released on
error paths that key off dev->hif2, which is not assigned until after the
IRQ setup. If pci_alloc_irq_vectors() or the primary devm_request_irq()
fails, the reference leaks. Drop it explicitly on those paths via
mt7915_put_hif2(). |
