| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
hugetlb: only adjust reservation during unmapping if mapcount is 0
Since df7a6d1f6405, __unmap_hugepage_range can adjust reservations. In
the case of folio mapped in both a parent and a child, if the parent
unmaps the range first, the reservation adjustment will result in an
underflow of the reserved count. Once the child unmaps the range, the
count is restored. Change __unmap_hugepage_range() to check the mapcount
before adjusting the reservation. |
| In the Linux kernel, the following vulnerability has been resolved:
accel/rocket: fix NULL dereference and integer overflow in rocket_job_push()
rocket_job_push() allocates a temporary array to hold all input and
output GEM object pointers:
bos = kvmalloc_array(job->in_bo_count + job->out_bo_count,
sizeof(void *), GFP_KERNEL);
memcpy(bos, job->in_bos, job->in_bo_count * sizeof(void *));
memcpy(&bos[job->in_bo_count], job->out_bos, ...);
Two bugs exist:
1. Missing NULL check: if kvmalloc_array() fails, bos is NULL and
the subsequent memcpy() dereferences it, causing a kernel NULL
pointer dereference.
2. Integer overflow: in_bo_count and out_bo_count are both u32, set
directly from userspace-supplied in_bo_handle_count and
out_bo_handle_count with no prior validation. Their sum is computed
in u32 arithmetic and can wrap to a smaller value, causing the
allocation count passed to kvmalloc_array() to be smaller than
intended. Subsequent uses still operate on the original counts when
copying and locking objects, which may lead to out-of-bounds accesses
on the temporary array.
Fix by using check_add_overflow() to detect count overflow before the
allocation, and adding a NULL check on the allocation result. |
| In the Linux kernel, the following vulnerability has been resolved:
accel/rocket: initialize job domain before cleanup paths
rocket_ioctl_submit_job() releases rjob through rocket_job_put() on
allocation error paths. rocket_job_cleanup() unconditionally calls
rocket_iommu_domain_put(job->domain), but job->domain is assigned only
after task copying and BO lookups. A failure before that assignment can
therefore clean up a job with a NULL domain pointer.
Take the per-file domain reference before the first error path can release
rjob. Also clear rjob->tasks after freeing it in rocket_copy_tasks(), so
the common cleanup path cannot free the task array again after a task-copy
error. |
| In the Linux kernel, the following vulnerability has been resolved:
accel/rocket: Fix error path handling in rocket_job_run()
In rocket_job_run(), after taking an extra fence reference for
job->done_fence via dma_fence_get(), the error paths have three bugs:
- The dma_fence reference held by job->done_fence is never released,
causing a reference leak.
- pm_runtime_get_sync() increments the usage counter even on failure,
but the error path does not decrement it, leaking the runtime PM
reference and preventing the NPU from suspending.
- A valid but unsignaled fence is returned to the DRM scheduler,
which triggers WARN("Fence ... released with pending signals!")
when the scheduler drops its reference.
Fix by replacing pm_runtime_get_sync() with pm_runtime_resume_and_get()
which auto-balances the usage counter on failure, releasing both fence
references on error, and returning ERR_PTR(ret) instead of the
unsignaled fence.
[tomeu: Refactored error paths to use consolidated goto labels] |
| In the Linux kernel, the following vulnerability has been resolved:
ACPI: pfr_update: fix stack buffer overflow in query_capability()
query_capability() copies four ACPI buffer objects returned by the
firmware _DSM into fixed-size u8[16] fields in struct
pfru_update_cap_info using memcpy with the firmware-supplied length:
memcpy(&cap_hdr->code_type,
elements[CAP_CODE_TYPE_IDX].buffer.pointer,
elements[CAP_CODE_TYPE_IDX].buffer.length);
The same pattern repeats for drv_type, platform_id, and oem_id.
If the firmware returns buffer.length > 16 for any of these fields,
memcpy writes past the destination array.
struct pfru_update_cap_info is stack-allocated in pfru_ioctl().
Confirmed with KASAN on 7.2-rc6: three stack-out-of-bounds reports
are generated when a DSM returns 64-byte buffers, with writes reaching
44 bytes past the end of cap_hdr's [64, 156) frame window into
adjacent stack redzones.
Introduce a helper pointer to out_obj->package.elements and use it
to validate each buffer length against its destination field size
before copying, returning -EINVAL if the firmware supplies an
oversized buffer. |
| In the Linux kernel, the following vulnerability has been resolved:
auxdisplay: charlcd: cancel backlight work on registration failure
With CONFIG_CHARLCD_BL_FLASH, charlcd_init() schedules bl_work before
charlcd_register() calls misc_register(). If registration fails, the
caller frees the charlcd object while delayed work still contains its
address.
Add charlcd_deinit() to cancel the delayed work and turn the backlight
off. Use it for both registration rollback and normal unregistration. |
| In the Linux kernel, the following vulnerability has been resolved:
block: validate user space vectors during extraction
The bio-based drivers don't necessarily check the alignment split, and
stacking block drivers don't always handle a misalignment detected after
submitting the bio. Validate user vectors against the device's
dma_alignment as the bio is built from the iov_iter, rejecting
misaligned early with -EINVAL. |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: eir: Fix OOB read in eir_get_service_data()
eir_get_service_data() walks the advertising data for a Service Data
field with a matching UUID. On a mismatch it advances:
eir += dlen;
eir_len -= dlen;
eir_get_data() reports dlen as the field's data length, but the field
spans dlen + 2 bytes once its length and type bytes count, and more
when non-Service-Data fields were skipped to reach it. The pointer
lands correctly on the next field. eir_len does not, and the shortfall
compounds across fields until eir_get_data() reads the length and type
bytes of a "field" past the end of the buffer.
For an ISO broadcast sink that buffer is hcon->le_per_adv_data[], filled
from the periodic advertising reports of a remote broadcaster. A PA
payload packed with mismatching Service Data fields walks off the array
into the rest of struct hci_conn. A drifted field that matches the BAA
UUID puts those bytes in iso_pi(sk)->base, where user space reads them
back with getsockopt(BT_ISO_BASE).
Recompute eir_len from the end of the buffer each iteration. |
| In the Linux kernel, the following vulnerability has been resolved:
bnx2x: fix double free in bnx2x_init_firmware() error path
bnx2x_init_firmware() frees bp->init_ops, bp->init_data and
bp->init_ops_offsets in its error path without setting them to NULL.
The cleanup function bnx2x_release_firmware() frees the same three
pointers unconditionally, so if init_firmware fails and
release_firmware is later called (e.g. from __bnx2x_remove or through
the function state machine), all three are freed a second time.
Set each pointer to NULL after kfree() in the error path so that the
subsequent kfree(NULL) in bnx2x_release_firmware() is a safe no-op. |
| In the Linux kernel, the following vulnerability has been resolved:
bpf, x86: Fix per-CPU address resolution into an extended register
The destination of the per-CPU address MOV is encoded in ModRM.reg,
which is extended by REX.R, but the REX prefix is built with
add_1mod(), which sets REX.B. REX.B extends ModRM.rm and SIB.base, and
this instruction addresses memory as disp32 with no base, so the bit
has no effect at all and the high register bit is simply lost.
Every is_ereg() destination therefore resolves to the wrong register,
picking whichever one shares the low three bits:
R5 -> RAX R7 -> RBP R8 -> RSI R9 -> RDI
With BPF_REG_5, whose reg2hex is 0, the emitted
65 49 03 04 25 <off> add %gs:<off>,%rax
adds the per-CPU offset to RAX rather than R8. The destination keeps
the unadjusted address and RAX is clobbered, so the program goes on to
dereference a pointer that was never made per-CPU:
BUG: unable to handle page fault for address: 0000607e386a8894
RIP: bpf_prog_707837aafd2aa9ae_update_percpu_data+0x93/0xc9
Call Trace:
__bpf_prog_test_run_raw_tp+0x2dc/0x7d0
__flush_smp_call_function_queue+0x1e9/0xc80
Kernel panic - not syncing: Fatal exception in interrupt
R5 is the mildest of the four, aliasing a scratch register and faulting
at the store. R7 aliases RBP and would corrupt the frame pointer, R8
and R9 alias the argument registers.
Use add_2mod() so the register goes through REX.R, matching how
add_2reg() places it in ModRM.reg and how emit_priv_frame_ptr()
hardcodes 0x4c for the same instruction with R9. Encodings for the
non-extended registers are unchanged.
Problem showed up when trying to resurrect BPF_GCC CI (selftests built
with BPF_GCC).
This has gone unnoticed because clang reloads the address into R1
before each per-CPU access, so the destination is never an extended
register. GCC keeps several per-CPU addresses live at once, and
test_progs-bpf_gcc panics the kernel in global_percpu_data/init, where
the address of a .percpu variable ends up in R5. |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: Disable preemption in __bpf_get_stack
get_perf_callchain() returns a per-CPU perf_callchain_entry buffer and
releases its recursion slot via put_callchain_entry() before returning,
so nothing keeps the entry reserved while __bpf_get_stack() consumes
it below.
A preemptible BPF program (e.g. a non-sleepable raw tracepoint program
on a PREEMPT kernel, which runs under migrate_disable() but not
preempt_disable()) can be scheduled out between obtaining the entry
and the copy. Another task scheduled on the same CPU then reuses the
same per-CPU buffer and overwrites trace->nr with a larger value.
copy_len is then computed from the inflated trace->nr and can exceed
the caller's buffer, causing an out-of-bounds write in the memcpy()
and in the build_id path.
The rcu_read_lock() taken here alone does not prevent this. It is
only taken on the may_fault path, and under CONFIG_PREEMPT_RCU it does
not disable preemption; it merely keeps perf's callchain buffer array
alive (freed via call_rcu()) and does nothing to stop another task
from reusing the entry.
Disable preemption around obtaining the callchain entry and copying
it into the caller's buffer, so the entry cannot be reused underneath
us and trace->nr stays bounded by max_depth. Build ID resolution may
fault and is therefore deferred until after preemption is re-enabled;
by then the instruction pointers have already been copied into buf,
so it operates only on that private copy. Note, preempt_disable() also
subsumes the buffer-lifetime guarantee the rcu_read_lock() provided,
since a preempt-disabled section is an RCU read-side critical section
for the callchain buffers' call_rcu() reclaim.
[ changed Fixes: commit ] |
| In the Linux kernel, the following vulnerability has been resolved:
dm-io: clone the source bio instead of copying its biovec
For DM_IO_BIO requests, do_region() built each destination bio by walking
the source bio's biovec and re-adding the pages one at a time, tracking
the remaining transfer in sectors. The vector lengths are byte granular
and need not be sector aligned (e.g. a misaligned O_DIRECT buffer split
across pages), so the sector-based accounting could lose a sub-sector
fragment: to_sector() truncated the remainder and the outer loop spun
forever submitting empty bios, hanging the I/O.
There is no need to rebuild the biovec at all. The destination reads into
(or writes from) exactly the same pages as the source bio, so the bio can
simply clone the source's biovec with bio_alloc_clone() and remap it to
the target device. The clone inherits the source's iterator and alignment,
and the block layer splits it to the target's limits on submission, so the
whole region maps to a single cloned bio with no manual page copying or
sector accounting.
This removes the per-page copy path (and its open-coded bvec dpages
helpers) for bio-backed I/O and fixes the hang on misaligned direct I/O to
a dm-mirror device. Page-list, vma and kmem sources keep the existing copy
path. |
| In the Linux kernel, the following vulnerability has been resolved:
dm-era: fix shadowed superblock leak on take-snap failure
metadata_take_snap() bumps the live superblock refcount and then
dm_tm_shadow_block() allocates a new block for the metadata snapshot.
If the subsequent dm_sm_inc_block() of writeset_tree_root or
era_array_root fails, the function only unlocks the clone and
returns. The newly allocated shadow block is never returned to the
metadata space map, so each failed take-snap permanently leaks one
metadata block.
Free the clone with dm_sm_dec_block() on those error paths, matching
the final step of metadata_drop_snap(). |
| In the Linux kernel, the following vulnerability has been resolved:
dm raid1: reserve space for NUL-terminator in build_constructor_string()
Reserve space for the termination NUL after the maximum 20 decimal
digits of a long long value to avoid buffer overflow in sprintf(). |
| In the Linux kernel, the following vulnerability has been resolved:
dm array: validate array block headers on read
array_block_check() validates blocknr and csum and nothing else, while
node_check(), next to it, has bounded the structural fields since both
were written. dm_array_cursor_next() takes its loop bound from the
on-disk nr_entries and element_at() is unguarded pointer arithmetic, so
a count larger than the block holds keeps the cursor in one block while
the index grows past it and the read walks off the dm-bufio buffer --
dm_cache_load_mappings() drives it once per cache block at activation.
Check the header against itself: reject a zero value_size, require
max_entries to equal calc_max_entries() for that value_size and block
size, and require nr_entries to fit. Equality rather than an upper bound,
since a count below the real capacity trips BUG_ON() in fill_ablock() and
trim_ablock(). Metadata dm-array writes satisfies all three. |
| In the Linux kernel, the following vulnerability has been resolved:
dm array: reject an array block whose value size is not the caller's
array_block_check() can only compare the header against itself, so a block
with value_size 4 and max_entries 1018 is internally consistent and passes.
dm-cache keeps two arrays -- mappings at 8 bytes and hints at 4 -- and the
roots for both live in the superblock. Point the mappings root at a hint
block and __load_mappings() walks it through an info whose value size is 8,
so element_at() strides 8 bytes over 4-byte entries and reaches offset 8160
of a 4096-byte block.
get_ablock() and __shadow_ablock() are the two places that hold the block
and the caller at once. Reject there when the two value sizes disagree.
Arrays only ever read their own blocks, so this fires on crafted metadata
only. |
| In the Linux kernel, the following vulnerability has been resolved:
cpufreq: apple-soc: Fix OPP table cleanup
apple_soc_cpufreq_init() adds OPP tables from firmware, but
some failure paths do not remove them. The driver also uses
dev_pm_opp_remove_all_dynamic(), which is not the right cleanup
helper for OPP tables loaded from firmware.
Use the cpumask OPP helper after the policy CPU mask has been
populated. Pair it with the matching cpumask remove helper on
failure paths and in apple_soc_cpufreq_exit(). This also removes
the separate dev_pm_opp_set_sharing_cpus() call, as the cpumask
helper loads the DT OPP tables for all CPUs in the policy. |
| In the Linux kernel, the following vulnerability has been resolved:
cxl/features: bound fwctl command payload to the input buffer
fwctl_cmd_rpc() copies cmd->in_len bytes into inbuf = kvzalloc(cmd->in_len)
and passes inbuf and in_len to ->fw_rpc(). The CXL callback cxlctl_fw_rpc()
ignores in_len and never checks the user-controlled op_size against it.
cxlctl_set_feature() bounds op_size only from below
(op_size <= sizeof(feat_in->hdr)) and then reads op_size - sizeof(hdr)
bytes from feat_in->feat_data via cxl_set_feature(). With a small in_len
and a large op_size the first memcpy() already reads past the
kvzalloc(in_len) buffer; the out-of-bounds bytes are placed in the mailbox
payload and sent to the device, and a large enough op_size can walk into
unmapped memory and oops the kernel. The Get paths pin op_size to a fixed
size but likewise read the input struct without checking in_len.
Reject, at the single dispatch point, any request whose fixed header plus
op_size does not fit in the copied-in buffer. The lower-bound test guards
the subtraction and ensures op_size was copied in before it is read. |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: RFCOMM: serialize security confirmation handling
rfcomm_security_cfm() looks up a session on session_list and then walks
its DLC list without holding rfcomm_mutex. Since RFCOMM session teardown
uses rfcomm_mutex, krfcommd can close and free the same session and DLCs
concurrently:
hci_rx_work krfcommd
----------- ---------
rfcomm_session_get()
rfcomm_lock()
rfcomm_session_close()
rfcomm_dlc_unlink()
rfcomm_session_del()
kfree(s)
rfcomm_unlock()
walk s->dlcs
The callback can then read a freed session list head and touch freed DLCs
while updating their flags or timers.
Serialize the session lookup and DLC traversal in rfcomm_security_cfm()
with rfcomm_mutex. This matches the existing RFCOMM session lifetime
rules and prevents concurrent rfcomm_session_del() / rfcomm_dlc_unlink()
from tearing the objects down while the callback is using them.
KASAN reported:
BUG: KASAN: slab-use-after-free in rfcomm_security_cfm+0x41c/0x440
Read of size 8 at addr ffff888111fb3960 by task kworker/u17:1/89
Workqueue: hci0 hci_rx_work
Call Trace:
rfcomm_security_cfm+0x41c/0x440
hci_encrypt_cfm+0x139/0x590
hci_encrypt_change_evt+0x37b/0xc40
hci_event_packet+0x71b/0xb20
hci_rx_work+0x293/0x730
Allocated by task 69:
rfcomm_session_add+0x9e/0x2f0
rfcomm_run+0x44b/0x41e0
Freed by task 69:
kfree+0x131/0x3c0
rfcomm_session_del+0x188/0x220
rfcomm_run+0x1985/0x41e0 |
| In the Linux kernel, the following vulnerability has been resolved:
kho: fix size calculation in kho_preserved_memory_reserve()
kho_preserved_memory_reserve() calculates the size of a preservation by
doing 1 << (order + PAGE_SHIFT). Since the '1' is a 32-bit integer, it
can only be shifted by 31. That is, it will only work for preservations
up to 2 GiB. Larger preservations will trigger undefined behaviour.
While preservations larger than 2 GiB can't be obtained via folios
currently, they can be obtained via kho_preserve_pages().
For example, memblock reserve_mem uses kho_preserve_pages().
Reservations larger than 2 GiB are valid and will trigger this bug if
properly aligned.
Fix it by using 1UL for shifting. |
