| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
xfrm: always flush state and policy upon NETDEV_UNREGISTER event
syzbot is reporting that "struct xfrm_state" refcount is leaking.
unregister_netdevice: waiting for netdevsim0 to become free. Usage count = 2
ref_tracker: netdev@ffff888052f24618 has 1/1 users at
__netdev_tracker_alloc include/linux/netdevice.h:4400 [inline]
netdev_tracker_alloc include/linux/netdevice.h:4412 [inline]
xfrm_dev_state_add+0x3a5/0x1080 net/xfrm/xfrm_device.c:316
xfrm_state_construct net/xfrm/xfrm_user.c:986 [inline]
xfrm_add_sa+0x34ff/0x5fa0 net/xfrm/xfrm_user.c:1022
xfrm_user_rcv_msg+0x58e/0xc00 net/xfrm/xfrm_user.c:3507
netlink_rcv_skb+0x158/0x420 net/netlink/af_netlink.c:2550
xfrm_netlink_rcv+0x71/0x90 net/xfrm/xfrm_user.c:3529
netlink_unicast_kernel net/netlink/af_netlink.c:1318 [inline]
netlink_unicast+0x5aa/0x870 net/netlink/af_netlink.c:1344
netlink_sendmsg+0x8c8/0xdd0 net/netlink/af_netlink.c:1894
sock_sendmsg_nosec net/socket.c:727 [inline]
__sock_sendmsg net/socket.c:742 [inline]
____sys_sendmsg+0xa5d/0xc30 net/socket.c:2592
___sys_sendmsg+0x134/0x1d0 net/socket.c:2646
__sys_sendmsg+0x16d/0x220 net/socket.c:2678
do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline]
do_syscall_64+0xcd/0xf80 arch/x86/entry/syscall_64.c:94
entry_SYSCALL_64_after_hwframe+0x77/0x7f
This is because commit d77e38e612a0 ("xfrm: Add an IPsec hardware
offloading API") implemented xfrm_dev_unregister() as no-op despite
xfrm_dev_state_add() from xfrm_state_construct() acquires a reference
to "struct net_device".
I guess that that commit expected that NETDEV_DOWN event is fired before
NETDEV_UNREGISTER event fires, and also assumed that xfrm_dev_state_add()
is called only if (dev->features & NETIF_F_HW_ESP) != 0.
Sabrina Dubroca identified steps to reproduce the same symptoms as below.
echo 0 > /sys/bus/netdevsim/new_device
dev=$(ls -1 /sys/bus/netdevsim/devices/netdevsim0/net/)
ip xfrm state add src 192.168.13.1 dst 192.168.13.2 proto esp \
spi 0x1000 mode tunnel aead 'rfc4106(gcm(aes))' $key 128 \
offload crypto dev $dev dir out
ethtool -K $dev esp-hw-offload off
echo 0 > /sys/bus/netdevsim/del_device
Like these steps indicate, the NETIF_F_HW_ESP bit can be cleared after
xfrm_dev_state_add() acquired a reference to "struct net_device".
Also, xfrm_dev_state_add() does not check for the NETIF_F_HW_ESP bit
when acquiring a reference to "struct net_device".
Commit 03891f820c21 ("xfrm: handle NETDEV_UNREGISTER for xfrm device")
re-introduced the NETDEV_UNREGISTER event to xfrm_dev_event(), but that
commit for unknown reason chose to share xfrm_dev_down() between the
NETDEV_DOWN event and the NETDEV_UNREGISTER event.
I guess that that commit missed the behavior in the previous paragraph.
Therefore, we need to re-introduce xfrm_dev_unregister() in order to
release the reference to "struct net_device" by unconditionally flushing
state and policy. |
| In the Linux kernel, the following vulnerability has been resolved:
Revert "PCI/IOV: Add PCI rescan-remove locking when enabling/disabling SR-IOV"
This reverts commit 05703271c3cd ("PCI/IOV: Add PCI rescan-remove locking
when enabling/disabling SR-IOV"), which causes a deadlock by recursively
taking pci_rescan_remove_lock when sriov_del_vfs() is called as part of
pci_stop_and_remove_bus_device(). For example with the following sequence
of commands:
$ echo <NUM> > /sys/bus/pci/devices/<pf>/sriov_numvfs
$ echo 1 > /sys/bus/pci/devices/<pf>/remove
A trimmed trace of the deadlock on a mlx5 device is as below:
zsh/5715 is trying to acquire lock:
000002597926ef50 (pci_rescan_remove_lock){+.+.}-{3:3}, at: sriov_disable+0x34/0x140
but task is already holding lock:
000002597926ef50 (pci_rescan_remove_lock){+.+.}-{3:3}, at: pci_stop_and_remove_bus_device_locked+0x24/0x80
...
Call Trace:
[<00000259778c4f90>] dump_stack_lvl+0xc0/0x110
[<00000259779c844e>] print_deadlock_bug+0x31e/0x330
[<00000259779c1908>] __lock_acquire+0x16c8/0x32f0
[<00000259779bffac>] lock_acquire+0x14c/0x350
[<00000259789643a6>] __mutex_lock_common+0xe6/0x1520
[<000002597896413c>] mutex_lock_nested+0x3c/0x50
[<00000259784a07e4>] sriov_disable+0x34/0x140
[<00000258f7d6dd80>] mlx5_sriov_disable+0x50/0x80 [mlx5_core]
[<00000258f7d5745e>] remove_one+0x5e/0xf0 [mlx5_core]
[<00000259784857fc>] pci_device_remove+0x3c/0xa0
[<000002597851012e>] device_release_driver_internal+0x18e/0x280
[<000002597847ae22>] pci_stop_bus_device+0x82/0xa0
[<000002597847afce>] pci_stop_and_remove_bus_device_locked+0x5e/0x80
[<00000259784972c2>] remove_store+0x72/0x90
[<0000025977e6661a>] kernfs_fop_write_iter+0x15a/0x200
[<0000025977d7241c>] vfs_write+0x24c/0x300
[<0000025977d72696>] ksys_write+0x86/0x110
[<000002597895b61c>] __do_syscall+0x14c/0x400
[<000002597896e0ee>] system_call+0x6e/0x90
This alone is not a complete fix as it restores the issue the cited commit
tried to solve. A new fix will be provided as a follow on. |
| In the Linux kernel, the following vulnerability has been resolved:
HID: logitech-hidpp: Check maxfield in hidpp_get_report_length()
Do not crash when a report has no fields.
Fake USB gadgets can send their own HID report descriptors and can define report
structures without valid fields. This can be used to crash the kernel over USB. |
| In the Linux kernel, the following vulnerability has been resolved:
ima: verify the previous kernel's IMA buffer lies in addressable RAM
Patch series "Address page fault in ima_restore_measurement_list()", v3.
When the second-stage kernel is booted via kexec with a limiting command
line such as "mem=<size>" we observe a pafe fault that happens.
BUG: unable to handle page fault for address: ffff97793ff47000
RIP: ima_restore_measurement_list+0xdc/0x45a
#PF: error_code(0x0000) not-present page
This happens on x86_64 only, as this is already fixed in aarch64 in
commit: cbf9c4b9617b ("of: check previous kernel's ima-kexec-buffer
against memory bounds")
This patch (of 3):
When the second-stage kernel is booted with a limiting command line (e.g.
"mem=<size>"), the IMA measurement buffer handed over from the previous
kernel may fall outside the addressable RAM of the new kernel. Accessing
such a buffer can fault during early restore.
Introduce a small generic helper, ima_validate_range(), which verifies
that a physical [start, end] range for the previous-kernel IMA buffer lies
within addressable memory:
- On x86, use pfn_range_is_mapped().
- On OF based architectures, use page_is_ram(). |
| In the Linux kernel, the following vulnerability has been resolved:
ntfs3: fix circular locking dependency in run_unpack_ex
Syzbot reported a circular locking dependency between wnd->rw_lock
(sbi->used.bitmap) and ni->file.run_lock.
The deadlock scenario:
1. ntfs_extend_mft() takes ni->file.run_lock then wnd->rw_lock.
2. run_unpack_ex() takes wnd->rw_lock then tries to acquire
ni->file.run_lock inside ntfs_refresh_zone().
This creates an AB-BA deadlock.
Fix this by using down_read_trylock() instead of down_read() when
acquiring run_lock in run_unpack_ex(). If the lock is contended,
skip ntfs_refresh_zone() - the MFT zone will be refreshed on the
next MFT operation. This breaks the circular dependency since we
never block waiting for run_lock while holding wnd->rw_lock. |
| In the Linux kernel, the following vulnerability has been resolved:
ALSA: mixer: oss: Add card disconnect checkpoints
ALSA OSS mixer layer calls the kcontrol ops rather individually, and
pending calls might be not always caught at disconnecting the device.
For avoiding the potential UAF scenarios, add sanity checks of the
card disconnection at each entry point of OSS mixer accesses. The
rwsem is taken just before that check, hence the rest context should
be covered by that properly. |
| In the Linux kernel, the following vulnerability has been resolved:
ACPI: processor: Update cpuidle driver check in __acpi_processor_start()
Commit 7a8c994cbb2d ("ACPI: processor: idle: Optimize ACPI idle
driver registration") moved the ACPI idle driver registration to
acpi_processor_driver_init() and acpi_processor_power_init() does
not register an idle driver any more.
Accordingly, the cpuidle driver check in __acpi_processor_start() needs
to be updated to avoid calling acpi_processor_power_init() without a
cpuidle driver, in which case the registration of the cpuidle device
in that function would lead to a NULL pointer dereference in
__cpuidle_register_device(). |
| In the Linux kernel, the following vulnerability has been resolved:
io_uring/zcrx: fix user_ref race between scrub and refill paths
The io_zcrx_put_niov_uref() function uses a non-atomic
check-then-decrement pattern (atomic_read followed by separate
atomic_dec) to manipulate user_refs. This is serialized against other
callers by rq_lock, but io_zcrx_scrub() modifies the same counter with
atomic_xchg() WITHOUT holding rq_lock.
On SMP systems, the following race exists:
CPU0 (refill, holds rq_lock) CPU1 (scrub, no rq_lock)
put_niov_uref:
atomic_read(uref) - 1
// window opens
atomic_xchg(uref, 0) - 1
return_niov_freelist(niov) [PUSH #1]
// window closes
atomic_dec(uref) - wraps to -1
returns true
return_niov(niov)
return_niov_freelist(niov) [PUSH #2: DOUBLE-FREE]
The same niov is pushed to the freelist twice, causing free_count to
exceed nr_iovs. Subsequent freelist pushes then perform an out-of-bounds
write (a u32 value) past the kvmalloc'd freelist array into the adjacent
slab object.
Fix this by replacing the non-atomic read-then-dec in
io_zcrx_put_niov_uref() with an atomic_try_cmpxchg loop that atomically
tests and decrements user_refs. This makes the operation safe against
concurrent atomic_xchg from scrub without requiring scrub to acquire
rq_lock.
[pavel: removed a warning and a comment] |
| In the Linux kernel, the following vulnerability has been resolved:
hfsplus: ensure sb->s_fs_info is always cleaned up
When hfsplus was converted to the new mount api a bug was introduced by
changing the allocation pattern of sb->s_fs_info. If setup_bdev_super()
fails after a new superblock has been allocated by sget_fc(), but before
hfsplus_fill_super() takes ownership of the filesystem-specific s_fs_info
data it was leaked.
Fix this by freeing sb->s_fs_info in hfsplus_kill_super(). |
| HCL DFXAnalytics is affected by an Improper Error Handling vulnerability where the application exposes detailed stack traces in responses, which could allow an attacker to gain insights into the application's internal structure, code logic, and environment configurations. |
| HCL DFXAnalytics is affected by an Insufficient Transport Layer Protection vulnerability where data is transmitted over the network without encryption, which could allow an attacker to compromise the confidentiality, integrity, and authentication of sensitive information. |
| HCL DFXAnalytics is affected by an Insecure Security Header configuration vulnerability where the Content-Security-Policy does not define strict directives for object-src and base-uri, which could allow an attacker to exploit injection vectors such as Cross-Site Scripting (XSS) |
| fast-uri decoded percent-encoded path separators and dot segments before applying dot-segment removal in its normalize() and equal() functions. Encoded path data was treated like real slashes and parent-directory references, so distinct URIs could collapse onto the same normalized path. Applications that normalize or compare attacker-controlled URLs to enforce path-based policy can be bypassed, with a path that appears confined under an allowed prefix normalizing to a different location. Versions <= 3.1.0 are affected. Update to 3.1.1 or later. |
| The LatePoint – Calendar Booking Plugin for Appointments and Events plugin for WordPress is vulnerable to Stored Cross-Site Scripting via the 'booking_form_page_url' parameter in all versions up to, and including, 5.5.0 due to insufficient input sanitization and output escaping. This makes it possible for unauthenticated attackers to inject arbitrary web scripts in pages that will execute whenever a user accesses an injected page. The malicious activity log entry is written to the database even when Stripe is not configured, because the latepoint_order_intent_created action hook fires before the Stripe Connect account ID is validated, meaning a fully functional Stripe integration is not required for exploitation. |
| Vulnerability in the Oracle OCI CLI product of Oracle Open Source Projects. The supported versions that is affected is 3.77. Easily exploitable vulnerability allows unauthenticated attacker with network access to compromise Oracle OCI CLI. Successful attacks of this vulnerability can result in Oracle OCI CLI allowing users to place imported files outside the intended directory. |
| The LatePoint plugin for WordPress is vulnerable to Stored Cross-Site Scripting in all versions up to and including 5.5.0. This is due to insufficient input sanitization on the customer cabinet profile update endpoint — where raw POST parameters (first_name, last_name, phone, notes) bypass sanitization because OsCustomerModel does not override params_to_sanitize(), causing set_data() to store unsanitized values verbatim in the database — combined with insufficient output escaping in generate_preview(), which injects those stored values into notification template HTML via str_replace() without any esc_html() call before echoing the result. This makes it possible for authenticated attackers with customer-level access or above to inject arbitrary web scripts into the admin notification preview panel that execute in an administrator's or agent's browser whenever a notification template referencing customer variables such as {{customer_full_name}}, {{customer_first_name}}, {{customer_last_name}}, {{customer_phone}}, or {{customer_notes}} is previewed. |
| The LatePoint – Calendar Booking Plugin for Appointments and Events plugin for WordPress is vulnerable to Stored Cross-Site Scripting via the 'first_name' parameter in all versions up to, and including, 5.5.0 due to insufficient input sanitization and output escaping. This makes it possible for unauthenticated attackers to inject arbitrary web scripts in pages that will execute whenever a user accesses an injected page. |
| A user able to connect to Agent 2 can inject an Oracle TNS connection string via the 'service' parameter. This can lead to Agent 2 connecting to an attacker-controlled server and leaking Oracle database credentials if they are saved in a named session. |
| The Item history widget (in Zabbix 7.0+) or the Plain text widget (in Zabbix 6.0) can execute injected JavaScript when HTML display is enabled. This can allow an attacker to perform unauthorized actions depending on which user opens a dashboard containing these widgets. The malicious JavaScript would have to come from a monitored host controlled by the attacker. Note: the Item history widget is a replacement for the Plain text widget since Zabbix 7.0. |
| In the Linux kernel, the following vulnerability has been resolved:
crypto: algif_aead - Revert to operating out-of-place
This mostly reverts commit 72548b093ee3 except for the copying of
the associated data.
There is no benefit in operating in-place in algif_aead since the
source and destination come from different mappings. Get rid of
all the complexity added for in-place operation and just copy the
AD directly. |
