| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| re2 provides Node.js bindings for Google's RE2 regular expression engine. Prior to 1.25.2, re2's String.prototype.match implementation with a global RE2 pattern that can match the empty string fails to advance its native matching cursor in lib/match.cc, causing an infinite loop and unbounded native memory growth that blocks the event loop and can exhaust host memory. This issue is fixed in 1.25.2. |
| In Roundcube Webmail before 1.6.17 and 1.7.x before 1.7.2, an infinite loop was discovered in the TNEF decoder, which may lead to denial of service upon opening an email with a TNEF attachment. |
| In the Linux kernel, the following vulnerability has been resolved:
net/sched: fix packet loop on netem when duplicate is on
When netem duplicates a packet it re-enqueues the copy at the root qdisc.
If another netem sits in the tree the copy can be duplicated
again, recursing until the stack or memory is exhausted.
The original duplication guard temporarily zeroed q->duplicate around
the re-enqueue, but that does not cover all cases because it is
per-qdisc state shared across all concurrent enqueue paths
and is not safe without additional locking.
Use the skb tc_depth field introduced in an earlier patch:
- increment it on the duplicate before re-enqueue
- skip duplication for any skb whose tc_depth is already non-zero.
This marks the packet itself rather than mutating qdisc state,
therefore it is safe regardless of tree topology or concurrency. |
| In the Linux kernel, the following vulnerability has been resolved:
USB: serial: digi_acceleport: fix hard lockup on disconnect
If submitting the OOB write urb fails persistently (e.g if the device is
being disconnected) the driver would loop indefinitely with interrupts
disabled.
Check for urb submission errors when sending OOB commands to avoid
hanging if, for example, open(), set_termios() or close() races with a
physical disconnect.
This is issue was flagged by Sashiko when reviewing an unrelated change
to the driver. |
| In the Linux kernel, the following vulnerability has been resolved:
s390: Revert support for DCACHE_WORD_ACCESS
load_unaligned_zeropad() reads eight bytes from unaligned addresses and may
cross page boundaries. It handles exceptions which may happen if reading
from the second page results in an exception.
For pages which are donated to the Ultravisor for secure execution purposes
the do_secure_storage_access() exception handler however does not handle
such exceptions correctly. Such an exception may result in an endless
exception loop which will never be resolved.
An attempt to fix this [1] turned out to be not sufficient. For now revert
load_unaligned_zeropad() until this problem has been resolved in a proper
way.
Note that the implementation of load_unaligned_zeropad() itself is
correct. The revert is just a temporary workaround until there is complete
fix for secure storage access exceptions.
[1] commit b00be77302d7 ("s390/mm: Add missing secure storage access fixups for donated memory") |
| Jodit Editor is a WYSIWYG editor with a built-in file browser & image editor. In versions prior to 4.12.28, the built-in clean-html sanitizer can be bypassed by a MathML/<style> carrier that hides a dangerous element from the sanitizer's element walk, so a no-interaction event handler survives into the editor value, potentially causing Mutation XSS. When an application supplies attacker-influenced HTML to the editor's value-set or insertion paths, the sanitized output still contains a live <img ... onload=...> (or another non-onerror handler such as onfocus). A consumer that renders that output (element.innerHTML = editor.value) executes the handler with no user interaction. This issue has been fixed in version 4.12.28. |
| facil.io 0.6.0 through 0.7.6 contains a denial-of-service vulnerability in the multipart body parser that allows an unauthenticated remote attacker to permanently freeze worker processes at 100% CPU by sending a multipart/form-data request with a partial closing boundary. The missing progress guard in the parser loop causes http_mime_parse to return 0 bytes consumed without setting done or error flags, causing the calling loop to re-invoke the parser on the same buffer indefinitely, exhausting all workers and permanently disabling the server until manually restarted. |
| Zephyr's IPv6 forwarding path re-sent routed unicast packets without ever decrementing the IPv6 hop limit. Both routing branches of ipv6_route_packet() (subsys/net/ip) were affected: the explicit-route path (net_route_packet()) and the on-link cross-interface path (net_route_packet_if()). Each set the packet forwarding flag and called net_send_data() with the hop limit untouched and no expiry check.
Per RFC 8200 the hop-limit decrement is the mechanism that bounds packet lifetime and terminates routing loops; without it, a device acting as an IPv6 router relays looping packets indefinitely. An on-path attacker who can induce or exploit a transient L3 loop turns it into a permanent forwarding storm, causing CPU/bandwidth resource exhaustion (availability DoS) on the forwarder and adjacent links; path-discovery and loop diagnostics that rely on hop-limit expiry are also defeated.
Affected configurations. In every affected release the forwarding path is reached via CONFIG_NET_ROUTE (enabled by default when CONFIG_NET_IPV6_NBR_CACHE is set), together with CONFIG_NET_ROUTING for cross-interface routing. Note that CONFIG_NET_IPV6_FORWARDING and CONFIG_NET_IPV4_FORWARDING — which appear in the fix and in this advisory's evidence notes — were introduced after v4.4.0, when the routing options were split and renamed; they do not exist in any affected release. When auditing a v4.4.1-or-earlier configuration, look for CONFIG_NET_ROUTE and CONFIG_NET_ROUTING.
IPv4 is not affected in any release. The IPv4 forwarding path (net_route_ipv4_packet() in route_ipv4.c) was added after v4.4.0 and has never shipped in a release. Its TTL decrement and IPv4 header-checksum recomputation landed on main as part of the same fix, so the evidence notes below discuss it, but no released version is reachable by way of IPv4.
Affected releases are v1.8.0 through v4.4.1: v1.8.0 introduced net_route_packet() and v2.2.0 added net_route_packet_if(), and neither decremented the hop limit. v4.3.1 carries the explicit-route fix but not the on-link one, so it is affected as well. Fixed on main by 7d8f1afa7345 (explicit-route path) and 589eadc74efa (on-link path). |
| In the Linux kernel, the following vulnerability has been resolved:
net_sched: hfsc: Address reentrant enqueue adding class to eltree twice
Savino says:
"We are writing to report that this recent patch
(141d34391abbb315d68556b7c67ad97885407547) [1]
can be bypassed, and a UAF can still occur when HFSC is utilized with
NETEM.
The patch only checks the cl->cl_nactive field to determine whether
it is the first insertion or not [2], but this field is only
incremented by init_vf [3].
By using HFSC_RSC (which uses init_ed) [4], it is possible to bypass the
check and insert the class twice in the eltree.
Under normal conditions, this would lead to an infinite loop in
hfsc_dequeue for the reasons we already explained in this report [5].
However, if TBF is added as root qdisc and it is configured with a
very low rate,
it can be utilized to prevent packets from being dequeued.
This behavior can be exploited to perform subsequent insertions in the
HFSC eltree and cause a UAF."
To fix both the UAF and the infinite loop, with netem as an hfsc child,
check explicitly in hfsc_enqueue whether the class is already in the eltree
whenever the HFSC_RSC flag is set.
[1] https://web.git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=141d34391abbb315d68556b7c67ad97885407547
[2] https://elixir.bootlin.com/linux/v6.15-rc5/source/net/sched/sch_hfsc.c#L1572
[3] https://elixir.bootlin.com/linux/v6.15-rc5/source/net/sched/sch_hfsc.c#L677
[4] https://elixir.bootlin.com/linux/v6.15-rc5/source/net/sched/sch_hfsc.c#L1574
[5] https://lore.kernel.org/netdev/8DuRWwfqjoRDLDmBMlIfbrsZg9Gx50DHJc1ilxsEBNe2D6NMoigR_eIRIG0LOjMc3r10nUUZtArXx4oZBIdUfZQrwjcQhdinnMis_0G7VEk=@willsroot.io/T/#u |
| In the Linux kernel, the following vulnerability has been resolved:
net_sched: Prevent creation of classes with TC_H_ROOT
The function qdisc_tree_reduce_backlog() uses TC_H_ROOT as a termination
condition when traversing up the qdisc tree to update parent backlog
counters. However, if a class is created with classid TC_H_ROOT, the
traversal terminates prematurely at this class instead of reaching the
actual root qdisc, causing parent statistics to be incorrectly maintained.
In case of DRR, this could lead to a crash as reported by Mingi Cho.
Prevent the creation of any Qdisc class with classid TC_H_ROOT
(0xFFFFFFFF) across all qdisc types, as suggested by Jamal. |
| In the Linux kernel, the following vulnerability has been resolved:
nvmet: Fix crash when a namespace is disabled
The namespace percpu counter protects pending I/O, and we can
only safely diable the namespace once the counter drop to zero.
Otherwise we end up with a crash when running blktests/nvme/058
(eg for loop transport):
[ 2352.930426] [ T53909] Oops: general protection fault, probably for non-canonical address 0xdffffc0000000005: 0000 [#1] PREEMPT SMP KASAN PTI
[ 2352.930431] [ T53909] KASAN: null-ptr-deref in range [0x0000000000000028-0x000000000000002f]
[ 2352.930434] [ T53909] CPU: 3 UID: 0 PID: 53909 Comm: kworker/u16:5 Tainted: G W 6.13.0-rc6 #232
[ 2352.930438] [ T53909] Tainted: [W]=WARN
[ 2352.930440] [ T53909] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.3-3.fc41 04/01/2014
[ 2352.930443] [ T53909] Workqueue: nvmet-wq nvme_loop_execute_work [nvme_loop]
[ 2352.930449] [ T53909] RIP: 0010:blkcg_set_ioprio+0x44/0x180
as the queue is already torn down when calling submit_bio();
So we need to init the percpu counter in nvmet_ns_enable(), and
wait for it to drop to zero in nvmet_ns_disable() to avoid having
I/O pending after the namespace has been disabled. |
| Netty is an asynchronous, event-driven network application framework. Prior to versions 4.1.136.Final and 4.2.16.Final, the `Bzip2Decoder` handler in Netty's compression codec pipeline is vulnerable to a denial-of-service attack through a malformed bzip2 stream that permanently captures the event-loop thread in an infinite loop. The vulnerability exists in the run-length encoding (RLE) state machine within [`Bzip2BlockDecompressor.read()`]. This issue has been fixed in versions 4.1.136.Final and 4.2.16.Final. |
| A flaw was found in dhcpcd's IPv6 Neighbor Discovery Router Advertisement processing. A specially crafted IPv6 Router Advertisement containing a zero-length Neighbor Discovery option can bypass validation during packet storage and later be reparsed without adequate validation, causing the parser to enter a non-advancing loop. Successful exploitation may result in excessive CPU consumption, leading to a denial of service. |
| nanoid (Nano ID) before 5.1.6 contains an infinite loop in the customAlphabet and customRandom functions. When these functions are configured with a size of 0, the internal generation loop never satisfies its exit condition and spins indefinitely, hanging the calling thread. An application that passes an unvalidated, attacker-controlled size of 0 to these functions is exposed to a denial-of-service condition. |
| nanoid (Nano ID) before 5.1.16 contains an infinite loop in the customAlphabet and nanoid functions of its non-secure module (nanoid/non-secure). When these functions are given a negative size, the loop counter is decremented from a negative value and never reaches its termination condition, spinning indefinitely and hanging the calling thread. An application that passes an unvalidated, attacker-controlled negative size to these functions is exposed to a denial-of-service condition. |
| PhpSpreadsheet is a pure PHP library for reading and writing spreadsheet files. In versions 4.0.0 through 5.8.0, 3.3.0 through 3.10.6, 2.2.0 through 2.4.6, 2.0.0 through 2.1.17, and all releases up to and including 1.30.5, the OLE reader follows sector chains from attacker-controlled XLS/OLE metadata without detecting cycles or enforcing a maximum chain length. A tiny malformed .xls/OLE file can set the small-block depot sector chain to point back to itself. During normal XLS detection, OLERead::read() appends the same sector data repeatedly until the PHP process exhausts memory. This is reachable from Reader\Xls::canRead() and therefore from automatic spreadsheet type detection. Applications that accept attacker-controlled spreadsheet uploads can suffer denial of service from a very small file. This issue has been fixed in versions 5.8.1, 3.10.7, 2.4.7, 2.1.18 and 1.30.6. |
| Astro is a web framework for content-driven websites. In versions 3.10.0 through 7.0.3, when a transition:persist, transition:scope, or transition:persist-props directive is applied to a client-hydrated (client:*) component, Astro copied the directive value onto the rendered <astro-island> element without HTML-escaping it. If a developer reflects attacker-controlled input into one of these directives, an attacker can break out of the attribute and inject arbitrary HTML/JavaScript into the server-rendered output, resulting in reflected cross-site scripting (XSS). Exploitation requires the application developer to have written a non-idiomatic pattern — passing untrusted, request-derived input directly into a transition directive. Astro applications that do not route untrusted input into these directives are unaffected. This issue has been fixed in version 7.0.4. |
| In the Synopsys DesignWare I2C driver (drivers/i2c/i2c_dw.c) operating in target/slave mode, the rx_full interrupt handler gates the write_requested() callback on dw->state != CMD_SEND, and dw->state is only reset to READY on a STOP interrupt. The START_DET interrupt, whose handler in i2c_dw_slave_read_clear_intr_bits() would reset the state on every (re)START, was never added to the enabled interrupt mask in i2c_dw_slave_register(), so that recovery path was dead code.
As a result, if the STOP interrupt is lost (bus glitch/reset, or a concurrent master driving STOP) or the bus master issues a legal WRITE-repeated-START-WRITE sequence with the same direction, the driver remains in CMD_SEND permanently and never invokes write_requested() again for the life of the target.
An I2C master on the same physical bus can deliberately trigger this, causing the I2C target function to malfunction for all subsequent write transactions and desynchronizing consumer framing state (e.g. MCTP-over-I2C), a recoverable-by-reset denial of service of the target peripheral.
The fix unmasks START_DET so the state is reset at every bus (re)START. Impact is availability-only over a local board-level bus; no memory corruption results in the in-tree consumer, whose per-byte buffer write is independently bounds-checked. |
| Next.js is a React framework for building full-stack web applications. In versions 13.0.0 through 15.5.20 and 16.0.0 through 16.2.10, crafted requests targeting Next.js applications using App Router with at least one Server Action can lead to excessive CPU usage blocking processing of further requests in the same process. This issue has been fixed in versions 15.5.21 and 16.2.11. |
| SurrealDB before 2.0.5, 2.1.x before 2.1.5, and 2.2.x before 2.2.2 allows authenticated users with OWNER or EDITOR permissions (at the root, namespace, or database level) to define custom database functions via DEFINE FUNCTION using nested FOR loops. Although a single loop's iteration count is constrained, nesting multiple loops (e.g., each with 1,000,000 iterations) is not, so an attacker can execute a function that consumes all server CPU time. Configured timeouts do not stop the execution, rendering the server unresponsive to other queries and connections until it is manually restarted. |
