| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
bpf/bonding: reject vlan+srcmac xmit_hash_policy change when XDP is loaded
bond_option_mode_set() already rejects mode changes that would make a
loaded XDP program incompatible via bond_xdp_check(). However,
bond_option_xmit_hash_policy_set() has no such guard.
For 802.3ad and balance-xor modes, bond_xdp_check() returns false when
xmit_hash_policy is vlan+srcmac, because the 802.1q payload is usually
absent due to hardware offload. This means a user can:
1. Attach a native XDP program to a bond in 802.3ad/balance-xor mode
with a compatible xmit_hash_policy (e.g. layer2+3).
2. Change xmit_hash_policy to vlan+srcmac while XDP remains loaded.
This leaves bond->xdp_prog set but bond_xdp_check() now returning false
for the same device. When the bond is later destroyed, dev_xdp_uninstall()
calls bond_xdp_set(dev, NULL, NULL) to remove the program, which hits
the bond_xdp_check() guard and returns -EOPNOTSUPP, triggering:
WARN_ON(dev_xdp_install(dev, mode, bpf_op, NULL, 0, NULL))
Fix this by rejecting xmit_hash_policy changes to vlan+srcmac when an
XDP program is loaded on a bond in 802.3ad or balance-xor mode.
commit 39a0876d595b ("net, bonding: Disallow vlan+srcmac with XDP")
introduced bond_xdp_check() which returns false for 802.3ad/balance-xor
modes when xmit_hash_policy is vlan+srcmac. The check was wired into
bond_xdp_set() to reject XDP attachment with an incompatible policy, but
the symmetric path -- preventing xmit_hash_policy from being changed to an
incompatible value after XDP is already loaded -- was left unguarded in
bond_option_xmit_hash_policy_set().
Note:
commit 094ee6017ea0 ("bonding: check xdp prog when set bond mode")
later added a similar guard to bond_option_mode_set(), but
bond_option_xmit_hash_policy_set() remained unprotected. |
| In the Linux kernel, the following vulnerability has been resolved:
net: usb: kaweth: validate USB endpoints
The kaweth driver should validate that the device it is probing has the
proper number and types of USB endpoints it is expecting before it binds
to it. If a malicious device were to not have the same urbs the driver
will crash later on when it blindly accesses these endpoints. |
| In the Linux kernel, the following vulnerability has been resolved:
ALSA: usb-audio: Use correct version for UAC3 header validation
The entry of the validators table for UAC3 AC header descriptor is
defined with the wrong protocol version UAC_VERSION_2, while it should
have been UAC_VERSION_3. This results in the validator never matching
for actual UAC3 devices (protocol == UAC_VERSION_3), causing their
header descriptors to bypass validation entirely. A malicious USB
device presenting a truncated UAC3 header could exploit this to cause
out-of-bounds reads when the driver later accesses unvalidated
descriptor fields.
The bug was introduced in the same commit as the recently fixed UAC3
feature unit sub-type typo, and appears to be from the same copy-paste
error when the UAC3 section was created from the UAC2 section. |
| In the Linux kernel, the following vulnerability has been resolved:
cxl/mbox: validate payload size before accessing contents in cxl_payload_from_user_allowed()
cxl_payload_from_user_allowed() casts and dereferences the input
payload without first verifying its size. When a raw mailbox command
is sent with an undersized payload (ie: 1 byte for CXL_MBOX_OP_CLEAR_LOG,
which expects a 16-byte UUID), uuid_equal() reads past the allocated buffer,
triggering a KASAN splat:
BUG: KASAN: slab-out-of-bounds in memcmp+0x176/0x1d0 lib/string.c:683
Read of size 8 at addr ffff88810130f5c0 by task syz.1.62/2258
CPU: 2 UID: 0 PID: 2258 Comm: syz.1.62 Not tainted 6.19.0-dirty #3 PREEMPT(voluntary)
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.17.0-0-gb52ca86e094d-prebuilt.qemu.org 04/01/2014
Call Trace:
<TASK>
__dump_stack lib/dump_stack.c:94 [inline]
dump_stack_lvl+0xab/0xe0 lib/dump_stack.c:120
print_address_description mm/kasan/report.c:378 [inline]
print_report+0xce/0x650 mm/kasan/report.c:482
kasan_report+0xce/0x100 mm/kasan/report.c:595
memcmp+0x176/0x1d0 lib/string.c:683
uuid_equal include/linux/uuid.h:73 [inline]
cxl_payload_from_user_allowed drivers/cxl/core/mbox.c:345 [inline]
cxl_mbox_cmd_ctor drivers/cxl/core/mbox.c:368 [inline]
cxl_validate_cmd_from_user drivers/cxl/core/mbox.c:522 [inline]
cxl_send_cmd+0x9c0/0xb50 drivers/cxl/core/mbox.c:643
__cxl_memdev_ioctl drivers/cxl/core/memdev.c:698 [inline]
cxl_memdev_ioctl+0x14f/0x190 drivers/cxl/core/memdev.c:713
vfs_ioctl fs/ioctl.c:51 [inline]
__do_sys_ioctl fs/ioctl.c:597 [inline]
__se_sys_ioctl fs/ioctl.c:583 [inline]
__x64_sys_ioctl+0x18e/0x210 fs/ioctl.c:583
do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline]
do_syscall_64+0xa8/0x330 arch/x86/entry/syscall_64.c:94
entry_SYSCALL_64_after_hwframe+0x77/0x7f
RIP: 0033:0x7fdaf331ba79
Code: ff ff c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 40 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 a8 ff ff ff f7 d8 64 89 01 48
RSP: 002b:00007fdaf1d77038 EFLAGS: 00000246 ORIG_RAX: 0000000000000010
RAX: ffffffffffffffda RBX: 00007fdaf3585fa0 RCX: 00007fdaf331ba79
RDX: 00002000000001c0 RSI: 00000000c030ce02 RDI: 0000000000000003
RBP: 00007fdaf33749df R08: 0000000000000000 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000000
R13: 00007fdaf3586038 R14: 00007fdaf3585fa0 R15: 00007ffced2af768
</TASK>
Add 'in_size' parameter to cxl_payload_from_user_allowed() and validate
the payload is large enough. |
| In the Linux kernel, the following vulnerability has been resolved:
netfilter: nft_set_rbtree: validate open interval overlap
[ Upstream commit 648946966a08e4cb1a71619e3d1b12bd7642de7b ]
Open intervals do not have an end element, in particular an open
interval at the end of the set is hard to validate because of it is
lacking the end element, and interval validation relies on such end
element to perform the checks.
This patch adds a new flag field to struct nft_set_elem, this is not an
issue because this is a temporary object that is allocated in the stack
from the insert/deactivate path. This flag field is used to specify that
this is the last element in this add/delete command.
The last flag is used, in combination with the start element cookie, to
check if there is a partial overlap, eg.
Already exists: 255.255.255.0-255.255.255.254
Add interval: 255.255.255.0-255.255.255.255
~~~~~~~~~~~~~
start element overlap
Basically, the idea is to check for an existing end element in the set
if there is an overlap with an existing start element.
However, the last open interval can come in any position in the add
command, the corner case can get a bit more complicated:
Already exists: 255.255.255.0-255.255.255.254
Add intervals: 255.255.255.0-255.255.255.255,255.255.255.0-255.255.255.254
~~~~~~~~~~~~~
start element overlap
To catch this overlap, annotate that the new start element is a possible
overlap, then report the overlap if the next element is another start
element that confirms that previous element in an open interval at the
end of the set.
For deletions, do not update the start cookie when deleting an open
interval, otherwise this can trigger spurious EEXIST when adding new
elements.
Unfortunately, there is no NFT_SET_ELEM_INTERVAL_OPEN flag which would
make easier to detect open interval overlaps. |
| In the Linux kernel, the following vulnerability has been resolved:
can: usb: f81604: handle short interrupt urb messages properly
If an interrupt urb is received that is not the correct length, properly
detect it and don't attempt to treat the data as valid. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amdgpu/userq: Do not allow userspace to trivially triger kernel warnings
Userspace can either deliberately pass in the too small num_fences, or the
required number can legitimately grow between the two calls to the userq
wait ioctl. In both cases we do not want the emit the kernel warning
backtrace since nothing is wrong with the kernel and userspace will simply
get an errno reported back. So lets simply drop the WARN_ONs.
(cherry picked from commit 2c333ea579de6cc20ea7bc50e9595ef72863e65c) |
| In the Linux kernel, the following vulnerability has been resolved:
xdp: produce a warning when calculated tailroom is negative
Many ethernet drivers report xdp Rx queue frag size as being the same as
DMA write size. However, the only user of this field, namely
bpf_xdp_frags_increase_tail(), clearly expects a truesize.
Such difference leads to unspecific memory corruption issues under certain
circumstances, e.g. in ixgbevf maximum DMA write size is 3 KB, so when
running xskxceiver's XDP_ADJUST_TAIL_GROW_MULTI_BUFF, 6K packet fully uses
all DMA-writable space in 2 buffers. This would be fine, if only
rxq->frag_size was properly set to 4K, but value of 3K results in a
negative tailroom, because there is a non-zero page offset.
We are supposed to return -EINVAL and be done with it in such case, but due
to tailroom being stored as an unsigned int, it is reported to be somewhere
near UINT_MAX, resulting in a tail being grown, even if the requested
offset is too much (it is around 2K in the abovementioned test). This later
leads to all kinds of unspecific calltraces.
[ 7340.337579] xskxceiver[1440]: segfault at 1da718 ip 00007f4161aeac9d sp 00007f41615a6a00 error 6
[ 7340.338040] xskxceiver[1441]: segfault at 7f410000000b ip 00000000004042b5 sp 00007f415bffecf0 error 4
[ 7340.338179] in libc.so.6[61c9d,7f4161aaf000+160000]
[ 7340.339230] in xskxceiver[42b5,400000+69000]
[ 7340.340300] likely on CPU 6 (core 0, socket 6)
[ 7340.340302] Code: ff ff 01 e9 f4 fe ff ff 0f 1f 44 00 00 4c 39 f0 74 73 31 c0 ba 01 00 00 00 f0 0f b1 17 0f 85 ba 00 00 00 49 8b 87 88 00 00 00 <4c> 89 70 08 eb cc 0f 1f 44 00 00 48 8d bd f0 fe ff ff 89 85 ec fe
[ 7340.340888] likely on CPU 3 (core 0, socket 3)
[ 7340.345088] Code: 00 00 00 ba 00 00 00 00 be 00 00 00 00 89 c7 e8 31 ca ff ff 89 45 ec 8b 45 ec 85 c0 78 07 b8 00 00 00 00 eb 46 e8 0b c8 ff ff <8b> 00 83 f8 69 74 24 e8 ff c7 ff ff 8b 00 83 f8 0b 74 18 e8 f3 c7
[ 7340.404334] Oops: general protection fault, probably for non-canonical address 0x6d255010bdffc: 0000 [#1] SMP NOPTI
[ 7340.405972] CPU: 7 UID: 0 PID: 1439 Comm: xskxceiver Not tainted 6.19.0-rc1+ #21 PREEMPT(lazy)
[ 7340.408006] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.17.0-5.fc42 04/01/2014
[ 7340.409716] RIP: 0010:lookup_swap_cgroup_id+0x44/0x80
[ 7340.410455] Code: 83 f8 1c 73 39 48 ba ff ff ff ff ff ff ff 03 48 8b 04 c5 20 55 fa bd 48 21 d1 48 89 ca 83 e1 01 48 d1 ea c1 e1 04 48 8d 04 90 <8b> 00 48 83 c4 10 d3 e8 c3 cc cc cc cc 31 c0 e9 98 b7 dd 00 48 89
[ 7340.412787] RSP: 0018:ffffcc5c04f7f6d0 EFLAGS: 00010202
[ 7340.413494] RAX: 0006d255010bdffc RBX: ffff891f477895a8 RCX: 0000000000000010
[ 7340.414431] RDX: 0001c17e3fffffff RSI: 00fa070000000000 RDI: 000382fc7fffffff
[ 7340.415354] RBP: 00fa070000000000 R08: ffffcc5c04f7f8f8 R09: ffffcc5c04f7f7d0
[ 7340.416283] R10: ffff891f4c1a7000 R11: ffffcc5c04f7f9c8 R12: ffffcc5c04f7f7d0
[ 7340.417218] R13: 03ffffffffffffff R14: 00fa06fffffffe00 R15: ffff891f47789500
[ 7340.418229] FS: 0000000000000000(0000) GS:ffff891ffdfaa000(0000) knlGS:0000000000000000
[ 7340.419489] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 7340.420286] CR2: 00007f415bfffd58 CR3: 0000000103f03002 CR4: 0000000000772ef0
[ 7340.421237] PKRU: 55555554
[ 7340.421623] Call Trace:
[ 7340.421987] <TASK>
[ 7340.422309] ? softleaf_from_pte+0x77/0xa0
[ 7340.422855] swap_pte_batch+0xa7/0x290
[ 7340.423363] zap_nonpresent_ptes.constprop.0.isra.0+0xd1/0x270
[ 7340.424102] zap_pte_range+0x281/0x580
[ 7340.424607] zap_pmd_range.isra.0+0xc9/0x240
[ 7340.425177] unmap_page_range+0x24d/0x420
[ 7340.425714] unmap_vmas+0xa1/0x180
[ 7340.426185] exit_mmap+0xe1/0x3b0
[ 7340.426644] __mmput+0x41/0x150
[ 7340.427098] exit_mm+0xb1/0x110
[ 7340.427539] do_exit+0x1b2/0x460
[ 7340.427992] do_group_exit+0x2d/0xc0
[ 7340.428477] get_signal+0x79d/0x7e0
[ 7340.428957] arch_do_signal_or_restart+0x34/0x100
[ 7340.429571] exit_to_user_mode_loop+0x8e/0x4c0
[ 7340.430159] do_syscall_64+0x188/
---truncated--- |
| In the Linux kernel, the following vulnerability has been resolved:
x86/fred: Correct speculative safety in fred_extint()
array_index_nospec() is no use if the result gets spilled to the stack, as
it makes the believed safe-under-speculation value subject to memory
predictions.
For all practical purposes, this means array_index_nospec() must be used in
the expression that accesses the array.
As the code currently stands, it's the wrong side of irqentry_enter(), and
'index' is put into %ebp across the function call.
Remove the index variable and reposition array_index_nospec(), so it's
calculated immediately before the array access. |
| In the Linux kernel, the following vulnerability has been resolved:
net: usb: kalmia: validate USB endpoints
The kalmia driver should validate that the device it is probing has the
proper number and types of USB endpoints it is expecting before it binds
to it. If a malicious device were to not have the same urbs the driver
will crash later on when it blindly accesses these endpoints. |
| In the Linux kernel, the following vulnerability has been resolved:
ice: change XDP RxQ frag_size from DMA write length to xdp.frame_sz
The only user of frag_size field in XDP RxQ info is
bpf_xdp_frags_increase_tail(). It clearly expects whole buff size instead
of DMA write size. Different assumptions in ice driver configuration lead
to negative tailroom.
This allows to trigger kernel panic, when using
XDP_ADJUST_TAIL_GROW_MULTI_BUFF xskxceiver test and changing packet size to
6912 and the requested offset to a huge value, e.g.
XSK_UMEM__MAX_FRAME_SIZE * 100.
Due to other quirks of the ZC configuration in ice, panic is not observed
in ZC mode, but tailroom growing still fails when it should not.
Use fill queue buffer truesize instead of DMA write size in XDP RxQ info.
Fix ZC mode too by using the new helper. |
| In the Linux kernel, the following vulnerability has been resolved:
net/sched: act_ife: Fix metalist update behavior
Whenever an ife action replace changes the metalist, instead of
replacing the old data on the metalist, the current ife code is appending
the new metadata. Aside from being innapropriate behavior, this may lead
to an unbounded addition of metadata to the metalist which might cause an
out of bounds error when running the encode op:
[ 138.423369][ C1] ==================================================================
[ 138.424317][ C1] BUG: KASAN: slab-out-of-bounds in ife_tlv_meta_encode (net/ife/ife.c:168)
[ 138.424906][ C1] Write of size 4 at addr ffff8880077f4ffe by task ife_out_out_bou/255
[ 138.425778][ C1] CPU: 1 UID: 0 PID: 255 Comm: ife_out_out_bou Not tainted 7.0.0-rc1-00169-gfbdfa8da05b6 #624 PREEMPT(full)
[ 138.425795][ C1] Hardware name: Bochs Bochs, BIOS Bochs 01/01/2011
[ 138.425800][ C1] Call Trace:
[ 138.425804][ C1] <IRQ>
[ 138.425808][ C1] dump_stack_lvl (lib/dump_stack.c:122)
[ 138.425828][ C1] print_report (mm/kasan/report.c:379 mm/kasan/report.c:482)
[ 138.425839][ C1] ? srso_alias_return_thunk (arch/x86/lib/retpoline.S:221)
[ 138.425844][ C1] ? __virt_addr_valid (./arch/x86/include/asm/preempt.h:95 (discriminator 1) ./include/linux/rcupdate.h:975 (discriminator 1) ./include/linux/mmzone.h:2207 (discriminator 1) arch/x86/mm/physaddr.c:54 (discriminator 1))
[ 138.425853][ C1] ? ife_tlv_meta_encode (net/ife/ife.c:168)
[ 138.425859][ C1] kasan_report (mm/kasan/report.c:221 mm/kasan/report.c:597)
[ 138.425868][ C1] ? ife_tlv_meta_encode (net/ife/ife.c:168)
[ 138.425878][ C1] kasan_check_range (mm/kasan/generic.c:186 (discriminator 1) mm/kasan/generic.c:200 (discriminator 1))
[ 138.425884][ C1] __asan_memset (mm/kasan/shadow.c:84 (discriminator 2))
[ 138.425889][ C1] ife_tlv_meta_encode (net/ife/ife.c:168)
[ 138.425893][ C1] ? ife_tlv_meta_encode (net/ife/ife.c:171)
[ 138.425898][ C1] ? srso_alias_return_thunk (arch/x86/lib/retpoline.S:221)
[ 138.425903][ C1] ife_encode_meta_u16 (net/sched/act_ife.c:57)
[ 138.425910][ C1] ? __pfx_do_raw_spin_lock (kernel/locking/spinlock_debug.c:114)
[ 138.425916][ C1] ? __asan_memcpy (mm/kasan/shadow.c:105 (discriminator 3))
[ 138.425921][ C1] ? __pfx_ife_encode_meta_u16 (net/sched/act_ife.c:45)
[ 138.425927][ C1] ? srso_alias_return_thunk (arch/x86/lib/retpoline.S:221)
[ 138.425931][ C1] tcf_ife_act (net/sched/act_ife.c:847 net/sched/act_ife.c:879)
To solve this issue, fix the replace behavior by adding the metalist to
the ife rcu data structure. |
| In the Linux kernel, the following vulnerability has been resolved:
net/sched: ets: fix divide by zero in the offload path
Offloading ETS requires computing each class' WRR weight: this is done by
averaging over the sums of quanta as 'q_sum' and 'q_psum'. Using unsigned
int, the same integer size as the individual DRR quanta, can overflow and
even cause division by zero, like it happened in the following splat:
Oops: divide error: 0000 [#1] SMP PTI
CPU: 13 UID: 0 PID: 487 Comm: tc Tainted: G E 6.19.0-virtme #45 PREEMPT(full)
Tainted: [E]=UNSIGNED_MODULE
Hardware name: Bochs Bochs, BIOS Bochs 01/01/2011
RIP: 0010:ets_offload_change+0x11f/0x290 [sch_ets]
Code: e4 45 31 ff eb 03 41 89 c7 41 89 cb 89 ce 83 f9 0f 0f 87 b7 00 00 00 45 8b 08 31 c0 45 01 cc 45 85 c9 74 09 41 6b c4 64 31 d2 <41> f7 f2 89 c2 44 29 fa 45 89 df 41 83 fb 0f 0f 87 c7 00 00 00 44
RSP: 0018:ffffd0a180d77588 EFLAGS: 00010246
RAX: 00000000ffffff38 RBX: ffff8d3d482ca000 RCX: 0000000000000000
RDX: 0000000000000000 RSI: 0000000000000000 RDI: ffffd0a180d77660
RBP: ffffd0a180d77690 R08: ffff8d3d482ca2d8 R09: 00000000fffffffe
R10: 0000000000000000 R11: 0000000000000000 R12: 00000000fffffffe
R13: ffff8d3d472f2000 R14: 0000000000000003 R15: 0000000000000000
FS: 00007f440b6c2740(0000) GS:ffff8d3dc9803000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 000000003cdd2000 CR3: 0000000007b58002 CR4: 0000000000172ef0
Call Trace:
<TASK>
ets_qdisc_change+0x870/0xf40 [sch_ets]
qdisc_create+0x12b/0x540
tc_modify_qdisc+0x6d7/0xbd0
rtnetlink_rcv_msg+0x168/0x6b0
netlink_rcv_skb+0x5c/0x110
netlink_unicast+0x1d6/0x2b0
netlink_sendmsg+0x22e/0x470
____sys_sendmsg+0x38a/0x3c0
___sys_sendmsg+0x99/0xe0
__sys_sendmsg+0x8a/0xf0
do_syscall_64+0x111/0xf80
entry_SYSCALL_64_after_hwframe+0x77/0x7f
RIP: 0033:0x7f440b81c77e
Code: 4d 89 d8 e8 d4 bc 00 00 4c 8b 5d f8 41 8b 93 08 03 00 00 59 5e 48 83 f8 fc 74 11 c9 c3 0f 1f 80 00 00 00 00 48 8b 45 10 0f 05 <c9> c3 83 e2 39 83 fa 08 75 e7 e8 13 ff ff ff 0f 1f 00 f3 0f 1e fa
RSP: 002b:00007fff951e4c10 EFLAGS: 00000202 ORIG_RAX: 000000000000002e
RAX: ffffffffffffffda RBX: 0000000000481820 RCX: 00007f440b81c77e
RDX: 0000000000000000 RSI: 00007fff951e4cd0 RDI: 0000000000000003
RBP: 00007fff951e4c20 R08: 0000000000000000 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000202 R12: 00007fff951f4fa8
R13: 00000000699ddede R14: 00007f440bb01000 R15: 0000000000486980
</TASK>
Modules linked in: sch_ets(E) netdevsim(E)
---[ end trace 0000000000000000 ]---
RIP: 0010:ets_offload_change+0x11f/0x290 [sch_ets]
Code: e4 45 31 ff eb 03 41 89 c7 41 89 cb 89 ce 83 f9 0f 0f 87 b7 00 00 00 45 8b 08 31 c0 45 01 cc 45 85 c9 74 09 41 6b c4 64 31 d2 <41> f7 f2 89 c2 44 29 fa 45 89 df 41 83 fb 0f 0f 87 c7 00 00 00 44
RSP: 0018:ffffd0a180d77588 EFLAGS: 00010246
RAX: 00000000ffffff38 RBX: ffff8d3d482ca000 RCX: 0000000000000000
RDX: 0000000000000000 RSI: 0000000000000000 RDI: ffffd0a180d77660
RBP: ffffd0a180d77690 R08: ffff8d3d482ca2d8 R09: 00000000fffffffe
R10: 0000000000000000 R11: 0000000000000000 R12: 00000000fffffffe
R13: ffff8d3d472f2000 R14: 0000000000000003 R15: 0000000000000000
FS: 00007f440b6c2740(0000) GS:ffff8d3dc9803000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 000000003cdd2000 CR3: 0000000007b58002 CR4: 0000000000172ef0
Kernel panic - not syncing: Fatal exception
Kernel Offset: 0x30000000 from 0xffffffff81000000 (relocation range: 0xffffffff80000000-0xffffffffbfffffff)
---[ end Kernel panic - not syncing: Fatal exception ]---
Fix this using 64-bit integers for 'q_sum' and 'q_psum'. |
| In the Linux kernel, the following vulnerability has been resolved:
gve: fix incorrect buffer cleanup in gve_tx_clean_pending_packets for QPL
In DQ-QPL mode, gve_tx_clean_pending_packets() incorrectly uses the RDA
buffer cleanup path. It iterates num_bufs times and attempts to unmap
entries in the dma array.
This leads to two issues:
1. The dma array shares storage with tx_qpl_buf_ids (union).
Interpreting buffer IDs as DMA addresses results in attempting to
unmap incorrect memory locations.
2. num_bufs in QPL mode (counting 2K chunks) can significantly exceed
the size of the dma array, causing out-of-bounds access warnings
(trace below is how we noticed this issue).
UBSAN: array-index-out-of-bounds in
drivers/net/ethernet/drivers/net/ethernet/google/gve/gve_tx_dqo.c:178:5 index 18 is out of
range for type 'dma_addr_t[18]' (aka 'unsigned long long[18]')
Workqueue: gve gve_service_task [gve]
Call Trace:
<TASK>
dump_stack_lvl+0x33/0xa0
__ubsan_handle_out_of_bounds+0xdc/0x110
gve_tx_stop_ring_dqo+0x182/0x200 [gve]
gve_close+0x1be/0x450 [gve]
gve_reset+0x99/0x120 [gve]
gve_service_task+0x61/0x100 [gve]
process_scheduled_works+0x1e9/0x380
Fix this by properly checking for QPL mode and delegating to
gve_free_tx_qpl_bufs() to reclaim the buffers. |
| In the Linux kernel, the following vulnerability has been resolved:
Squashfs: check metadata block offset is within range
Syzkaller reports a "general protection fault in squashfs_copy_data"
This is ultimately caused by a corrupted index look-up table, which
produces a negative metadata block offset.
This is subsequently passed to squashfs_copy_data (via
squashfs_read_metadata) where the negative offset causes an out of bounds
access.
The fix is to check that the offset is within range in
squashfs_read_metadata. This will trap this and other cases. |
| In the Linux kernel, the following vulnerability has been resolved:
tracing/dma: Cap dma_map_sg tracepoint arrays to prevent buffer overflow
The dma_map_sg tracepoint can trigger a perf buffer overflow when
tracing large scatter-gather lists. With devices like virtio-gpu
creating large DRM buffers, nents can exceed 1000 entries, resulting
in:
phys_addrs: 1000 * 8 bytes = 8,000 bytes
dma_addrs: 1000 * 8 bytes = 8,000 bytes
lengths: 1000 * 4 bytes = 4,000 bytes
Total: ~20,000 bytes
This exceeds PERF_MAX_TRACE_SIZE (8192 bytes), causing:
WARNING: CPU: 0 PID: 5497 at kernel/trace/trace_event_perf.c:405
perf buffer not large enough, wanted 24620, have 8192
Cap all three dynamic arrays at 128 entries using min() in the array
size calculation. This ensures arrays are only as large as needed
(up to the cap), avoiding unnecessary memory allocation for small
operations while preventing overflow for large ones.
The tracepoint now records the full nents/ents counts and a truncated
flag so users can see when data has been capped.
Changes in v2:
- Use min(nents, DMA_TRACE_MAX_ENTRIES) for dynamic array sizing
instead of fixed DMA_TRACE_MAX_ENTRIES allocation (feedback from
Steven Rostedt)
- This allocates only what's needed up to the cap, avoiding waste
for small operations
Reviwed-by: Sean Anderson <sean.anderson@linux.dev> |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: L2CAP: Fix accepting multiple L2CAP_ECRED_CONN_REQ
Currently the code attempts to accept requests regardless of the
command identifier which may cause multiple requests to be marked
as pending (FLAG_DEFER_SETUP) which can cause more than
L2CAP_ECRED_MAX_CID(5) to be allocated in l2cap_ecred_rsp_defer
causing an overflow.
The spec is quite clear that the same identifier shall not be used on
subsequent requests:
'Within each signaling channel a different Identifier shall be used
for each successive request or indication.'
https://www.bluetooth.com/wp-content/uploads/Files/Specification/HTML/Core-62/out/en/host/logical-link-control-and-adaptation-protocol-specification.html#UUID-32a25a06-4aa4-c6c7-77c5-dcfe3682355d
So this attempts to check if there are any channels pending with the
same identifier and rejects if any are found. |
| A vulnerability in the bootloader of Cisco IOS XE Software for Cisco Catalyst 9200 Series Switches, Cisco Catalyst ESS9300 Embedded Series Switches, Cisco Catalyst IE9310 and IE9320 Rugged Series Switches, and Cisco IE3500 and IE3505 Rugged Series Switches could allow an authenticated, local attacker with level-15 privileges or an unauthenticated attacker with physical access to an affected device to execute arbitrary code at boot time and break the chain of trust.
This vulnerability is due to insufficient validation of software at boot time. An attacker could exploit this vulnerability by manipulating the loaded binaries on an affected device to bypass some of the integrity checks that are performed during the boot process. A successful exploit could allow the attacker to execute code that bypasses the requirement to run Cisco-signed images.
Cisco has assigned this security advisory a Security Impact Rating (SIR) of High rather than Medium as the score indicates because this vulnerability allows an attacker to bypass a major security feature of a device. |
| Weak Authentication vulnerability in PickPlugins User Verification user-verification allows Authentication Abuse.This issue affects User Verification: from n/a through <= 2.0.45. |
| GitLab has remediated an issue in GitLab CE/EE affecting all versions from 16.10 before 18.8.7, 18.9 before 18.9.3, and 18.10 before 18.10.1 that could have allowed an authenticated user to cause a denial of service due to excessive resource consumption when processing certain webhook configuration inputs. |
