| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
watchdog: msc313e: Fix NULL pointer dereference in PM callbacks
msc313e_wdt_probe() doesn't set the driver data for the platform device.
As a result, dev_get_drvdata() in msc313e_wdt_suspend() and
msc313e_wdt_resume() will return NULL, leading to a NULL pointer
dereference afterward.
Set the platform device driver data in msc313e_wdt_probe(). |
| In the Linux kernel, the following vulnerability has been resolved:
netfs: Fix subreq ref leak
Fix a subrequest ref leak in netfs_unbuffered_write() in the event that
subreq->io_iter ends up zero length during preparation. |
| In the Linux kernel, the following vulnerability has been resolved:
netfs: break unbuffered write when netfs_alloc_subrequest() fails
syzbot reported a null-ptr-deref below [1] following a fault injection in
netfs_alloc_subrequest(). [0]
When netfs_alloc_subrequest() fails, subreq is NULL.
Later, netfs_prepare_write() tries to initialize members of
subreq(e.g., source), the issue in [1] is triggered.
Let's handle the error of netfs_prepare_write() properly.
[0]
FAULT_INJECTION: forcing a failure.
name failslab, interval 1, probability 0, space 0, times 0
Call Trace:
netfs_alloc_subrequest+0x116/0x3f0
netfs_prepare_write+0x76/0x7b0
netfs_unbuffered_write+0x75c/0x2020
netfs_unbuffered_write_iter_locked+0x7d6/0xa80
netfs_unbuffered_write_iter+0x442/0x720
v9fs_file_write_iter+0xbf/0x100
vfs_write+0x6ac/0x1050
[1]
KASAN: null-ptr-deref in range [0x00000000000000a8-0x00000000000000af]
RIP: 0010:netfs_prepare_write+0xbc/0x7b0 fs/netfs/write_issue.c:173
Call Trace:
netfs_unbuffered_write+0x75c/0x2020 fs/netfs/direct_write.c:111
netfs_unbuffered_write_iter_locked+0x7d6/0xa80 fs/netfs/direct_write.c:290
netfs_unbuffered_write_iter+0x442/0x720 fs/netfs/direct_write.c:382
v9fs_file_write_iter+0xbf/0x100 fs/9p/vfs_file.c:409
new_sync_write fs/read_write.c:595 [inline] |
| In the Linux kernel, the following vulnerability has been resolved:
netfs: Fix readahead synchronisation issues by loading all folios upfront
There are some synchronisation issues that derive from the app thread
adding more folios to the rolling buffer whilst the collector thread is
looking at them or trying to clear them, such as determining the setting of
front_folio_order when the next folio hasn't been added yet,
The reason for the rolling buffer approach is that loading the buffer
upfront and then dropping all the refs just acquired is quite a slow
operation, and loading progressively allows some of the cost to be deferred
until after at least some of the I/O is started.
Instead, a better way is to load all the folios into the rolling buffer
upfront - and then drop the refs later, once the I/O is in progress. (Even
better would be for the refs not to be there at all.)
Fix this by changing the rolling buffer loader to load all the folios
selected by the VM for readahead upfront into the folio queue. The folio
queue is allocated a batch worth at a time as we don't know how many folios
are involved (the readahead_control struct, alas, has a page count, not a
folio count).
The folio refs acquired from readahead are then dropped in bulk once the
first subrequest is dispatched as it's quite a slow operation. The
collector waits for NETFS_RREQ_NEED_PUT_RA_REFS to be cleared so that it
doesn't unlock folios before the xarray has been scanned for them.
This simplifies the buffer handling later and isn't noticeably slower as
the xarray doesn't need to be modified and the folios are all already
pre-locked. |
| In the Linux kernel, the following vulnerability has been resolved:
cachefiles: Fix potential UAF/KASAN warning
Currently, trace_cachefiles_coherency() is being passed a pointer to a
__be64 lain over the coherency data in struct cachefiles_xattr so that it
can display the first 8 bytes. However, the data is of variable length and
could even be 0 bytes. This could lead to a UAF or KASAN warning.
Fix this by making sure the buffer has room for at least 8 bytes and that
those 8 bytes are pre-cleared.
Further, those bytes are not 8-byte aligned, so fix the tracepoint to
extract the data as four 2-byte words (they are 2-byte aligned) and
reassemble the __be64. The compiler will convert this into a single 8-byte
load where the CPU supports it. |
| In the Linux kernel, the following vulnerability has been resolved:
ALSA: pcm: Serialize PCM mmap with buffer reallocation to fix page UAF
snd_pcm_hw_params() and snd_pcm_hw_free() guard buffer reallocation
with an mmap_count check performed under the PCM stream lock, but the
lock is released long before the buffer is actually freed:
snd_pcm_sync_stop(), constraint refinement and do_free_pages() all
happen in between. snd_pcm_mmap_data(), on the other hand, takes no
lock at all: it validates against the old buffer's state and
dma_bytes, remaps its pages into the VMA, and only then increments
mmap_count.
A concurrent mmap() can therefore slip in between the check and the
free. remap_pfn_range() installs writable PTEs for the old buffer's
pages without taking page references, and the subsequent
do_free_pages() returns those pages to the page allocator while the
VMA still maps them. This leaves a stale, writable mapping of freed
pages: a page-level use-after-free that can be leveraged for local
privilege escalation.
Make snd_pcm_mmap_data() participate in the buffer-access scheme
introduced for hw_params/hw_free: acquire runtime->buffer_accessing
before validating and remapping, and release it afterwards. Buffer
reallocation already fails with -EBUSY while accessors are active,
and the mmap side now fails with -EBUSY while a reallocation is in
progress, so the validate/remap sequence and the check/free sequence
can no longer interleave.
A reproducer that turns this race into a stale writable mapping of
the freed DMA buffer pages is available on request. |
| In the Linux kernel, the following vulnerability has been resolved:
ksmbd: safely drain sessions during logoff
SMB3 multichannel allows requests for one session to run on multiple
connections. Wait for all channels bound to a session before freeing
shared session objects.
A deferred byte-range lock remains counted as a running request and only
wakes when its file closes. Wake blocked locks during the drain without
unpublishing or modifying their file objects. Synchronous CANCEL requests
must invoke their cancellation callback to wake pending operations, while
CHANGE_NOTIFY completion remains specific to the asynchronous path.
Serialize session teardown with channel registration and previous-session
cleanup, and use atomic work-state transitions so LOGOFF, CANCEL, and
connection teardown invoke cancellation callbacks only once. |
| In the Linux kernel, the following vulnerability has been resolved:
ksmbd: propagate DACL parsing errors
parse_dacl() silently accepts truncated ACEs and allocation failures,
allowing set_info_sec() to continue with an incomplete ACL conversion.
Return parsing and allocation errors to parse_sec_desc() so malformed
security descriptors are rejected before inode attributes or ACL xattrs
are updated. |
| In the Linux kernel, the following vulnerability has been resolved:
ksmbd: rate limit unmapped SID errors
A client can include many structurally valid but unmapped SIDs in a DACL.
Logging every mapping failure lets one request generate hundreds of kernel
error messages.
Rate limit the message to prevent an authenticated client from flooding
the kernel log. |
| In the Linux kernel, the following vulnerability has been resolved:
ksmbd: fix listener task lifetime on netdev events
The listener thread exits when its listening socket is shutdown. The
netdevice notifier shuts down the socket before calling kthread_stop(), so
the task_struct can be freed before kthread_stop() gets its reference.
Create the listener in a stopped state and hold an extra task_struct
reference until kthread_stop_put() completes. Also stop and release
listeners before freeing their interface records during TCP teardown. |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: btintel: validate version TLV value lengths
btintel_parse_version_tlv() verifies that a complete TLV is present in
the response, but it does not ensure that the value is long enough for
the specific TLV type. A short value can therefore cause an
out-of-bounds read through get_unaligned_le16(), get_unaligned_le32(),
or memcpy().
Reject values shorter than the minimum required by each known TLV type.
Also reject responses that do not contain the Command Complete Status
field. |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: btintel: bound firmware ID by TLV length
The firmware ID is treated as a NUL-terminated string even though the
TLV length is its only boundary. If the value does not contain a NUL
terminator, snprintf() can read beyond the received response.
Limit the conversion to the advertised TLV value length. |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: hci_core: Fix race condition during device registration
In hci_register_dev(), the power_on work item is queued to
hdev->req_workqueue before initializing hdev->adv_monitors_idr and
registering the MSFT extension via msft_register(). For devices marked with
quirks such as HCI_QUIRK_RAW_DEVICE, the HCI_UNCONFIGURED flag is set on
the device. When the power_on work item runs concurrently on another CPU,
hci_power_on() detects that the device is unconfigured and immediately
invokes hci_dev_do_close(), which calls msft_do_close().
Concurrently, msft_register() allocates the msft structure and exposes it
to hdev->msft_data prior to calling mutex_init(&msft->filter_lock). If
msft_do_close() executes while hdev->msft_data is already assigned but the
mutex has not yet been initialized, mutex_lock(&msft->filter_lock) operates
on an uninitialized mutex, triggering a DEBUG_LOCKS warning:
DEBUG_LOCKS_WARN_ON(lock->magic != lock)
WARNING: kernel/locking/mutex.c:625 at __mutex_lock_common
kernel/locking/mutex.c:625 [inline]
WARNING: kernel/locking/mutex.c:625 at __mutex_lock+0x12d8/0x1550
kernel/locking/mutex.c:821
...
Call Trace:
<TASK>
msft_do_close+0x308/0x7b0 net/bluetooth/msft.c:693
hci_dev_close_sync+0x86b/0x10a0 net/bluetooth/hci_sync.c:5522
hci_dev_do_close net/bluetooth/hci_core.c:499 [inline]
hci_power_on+0x32c/0x750 net/bluetooth/hci_core.c:937
process_one_work kernel/workqueue.c:3322 [inline]
process_scheduled_works+0xa8e/0x14e0 kernel/workqueue.c:3405
worker_thread+0x92d/0xe10 kernel/workqueue.c:3486
kthread+0x388/0x470 kernel/kthread.c:436
ret_from_fork+0x514/0xb70 arch/x86/kernel/process.c:158
ret_from_fork_asm+0x1a/0x30 arch/x86/entry/entry_64.S:245
</TASK>
Fix this by moving the queue_work() call in hci_register_dev() to after
idr_init(&hdev->adv_monitors_idr) and msft_register(hdev) so that device
structures and extensions are fully initialized before asynchronous tasks
can access them. Additionally, assign hdev->msft_data in msft_register()
only after mutex_init(&msft->filter_lock) has completed. |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: L2CAP: fix chan mode for LE_CONN_REQ + EXT_FLOWCTL pchan
l2cap_new_connection() sets default value of channel mode to match the
parent channel. l2cap_le_connect_req() left this at the default, and
created L2CAP_MODE_EXT_FLOWCTL channels if listening pchan has that
mode. This causes FLAG_DEFER_SETUP channels to reply to
L2CAP_LE_CONN_REQ with L2CAP_ECRED_CONN_RSP, which is incorrect.
It can also result to stack OOB write (of l2cap_alloc_cid determined
values) in l2cap_ecred_rsp_defer(), as l2cap_le_connect_req() does not
limit maximum number of deferred channels or check for duplicate ident.
Fix by setting chan->mode correctly in l2cap_le_connect_req().
Also check channel mode in l2cap_ecred_rsp_defer(), and do WARN_ON_ONCE
instead of OOB write to make it less brittle. |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: L2CAP: fix out-of-bounds write in l2cap_ecred_connect
l2cap_chan_connect() tries to ensure there are no more than
L2CAP_ECRED_CONN_SCID_MAX pending ECRED channels, so they fit in the
same L2CAP_ECRED_CONN_REQ that l2cap_ecred_connect() constructs.
However, the check only counts deferred channels. If 6 L2CAP sockets
are connected at the same time in order DDDDND (D=deferred,
N=non-deferred), the last can bump the total to max+1. It results to
one __le16 written out of bounds of the scid array, and an invalid
ECRED_CONN_REQ being sent.
Fix by leaving room for the non-deferred pending ECRED channels in the
counting in l2cap_chan_connect(), so the limit can't be exceeded.
Move counting under same critical section where the channel is added.
Although race conditions involving this appear unreachable, it's easier
to see.
Also add WARN_ON_ONCE check in l2cap_ecred_defer_connect() to make this
less brittle. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/pagemap: Prevent double migration of device pages
A device-private folio migrated to system memory by a CPU fault can
remain reachable through the raw-PFN eviction path until migration
finalization drops the source reference.
If eviction selects the same device-private folio during this window,
it can attempt to migrate the folio again. The second migration can leave
an uncharged folio on an LRU list, causing folio_lruvec_lock_irqsave() to
retry indefinitely and resulting in a soft lockup and RCU stall.
Mark successfully migrated device-private folios using a low bit of
their zone_device_data before migration finalization. Make both CPU-fault
and raw-PFN migration paths skip device-private folios carrying this
flag.
Mask the flag when retrieving the drm_pagemap_zdd pointer and preserve
it when a device-private folio is split. Keeping the state on the physical
folio also avoids depending on a virtual address that may change before a
fault occurs.
v2:
- Replace the retired-PFN XArray with an embedded bitmap. (Matthew Brost)
- Mark every base page covered by a migrated folio so retirement remains
valid if the folio is later split.
v3:
- Store the migrated state in a low bit of zone_device_data instead of
adding virtual-range and bitmap tracking to the ZDD. (Matthew Brost)
- Mask the flag when retrieving the ZDD and preserve it when splitting
a folio.
- Drop the pre-existing fixes already covered by Matthew Brost's series:
https://patchwork.freedesktop.org/series/171651/
v4:
- Advance by the folio size only for migration entries marked with
MIGRATE_PFN_COMPOUND. (Sashiko)
v5:
- Simplify ZDD flag updates and folio iteration. (Matthew Brost)
- Skip retired device-private folios in the CPU-fault path. (Matthew Brost)
- Preserve flag bits while taking a new ZDD reference for split folios.
v6:
- Restore MIGRATE_PFN_COMPOUND-aware stepping so non-compound migration
entries are processed one at a time. (Sashiko)
- Drop the pre-existing fixes already covered by Matthew Brost's series:
https://patchwork.freedesktop.org/series/171651/
The lockup was observed as:
[10109.860465] watchdog: BUG: soft lockup - CPU#9 stuck for 26s! [kworker/u65:5:6557]
[10109.860524] Tainted: [S]=CPU_OUT_OF_SPEC, [O]=OOT_MODULE
[10109.860524] Hardware name: ASUS System Product Name/PRIME Z790-P WIFI, BIOS 0812 02/24/2023
[10109.860525] Workqueue: xe_page_fault_work_queue xe_pagefault_queue_work [xe]
[10109.860644] RIP: 0010:_raw_spin_unlock_irqrestore+0x57/0x80
[10109.860655] Call Trace:
[10109.860655] <TASK>
[10109.860657] folio_lruvec_lock_irqsave+0x216/0x220
[10109.860661] ? __pfx_lru_add+0x10/0x10
[10109.860665] folio_batch_move_lru+0xc8/0x450
[10109.860670] ? lock_acquire+0xc4/0x2d0
[10109.860674] ? __folio_batch_add_and_move+0x60/0x2e0
[10109.860677] ? folio_migrate_mapping+0xa6/0x110
[10109.860679] ? folio_migrate_flags+0x13b/0x1b0
[10109.860681] ? __pfx_lru_add+0x10/0x10
[10109.860683] __folio_batch_add_and_move+0xe7/0x2e0
[10109.860685] ? dma_iova_try_alloc+0xb0/0x140
[10109.860689] folio_add_lru+0x64/0x80
[10109.860691] __migrate_device_finalize+0x12c/0x270
[10109.860695] migrate_device_finalize+0x10/0x20
[10109.860698] drm_pagemap_evict_to_ram+0x185/0x370 [drm_gpusvm_helper]
[10109.860704] ? drm_pagemap_evict_to_ram+0x96/0x370 [drm_gpusvm_helper]
[10109.860709] xe_svm_bo_evict+0x15/0x20 [xe]
[10109.860819] ? xe_svm_bo_evict+0x15/0x20 [xe]
[10109.860921] xe_bo_move+0x107e/0x1570 [xe]
[10109.860992] ? xe_ttm_tt_create+0x168/0x340 [xe]
[10109.861059] ? __up_read+0x98/0x2b0
[10109.861061] ? lock_is_held_type+0xa3/0x130
[10109.861067] ttm_bo_handle_move_mem+0xe8/0x1e0 [ttm]
[10109.861075] ttm_bo_evict+0x141/0x1c0 [ttm]
[10109.861081] ttm_bo_evict_cb+0x9f/0x100 [ttm]
[10109.861086] ttm_lru_walk_for_evict+0x84/0x190 [ttm]
[10109.861091] ? xe_ttm_vram_mgr_new+0x258/0x3a0 [xe]
[10109.861198] ttm_bo_alloc_resource+0x219/0
---truncated--- |
| In the Linux kernel, the following vulnerability has been resolved:
net: ethernet: oa_tc6: Improve the error recovery
When oversubscribed traffic causes lot of buffer overflow errors,
probably due to loss of data chunks, driver fails to find a
data chunk with end_valid bit set, before it runs out of sk buffer
space. As a result, assert is seen during skb_put.
Now, check is made if skb buffer has enough tailroom for the
incoming data before accepting. If there is no room, current
frame is abandoned and it will start looking for a data chunk
with start_valid bit, that is a new frame.
SK buffer allocation error is considered as recoverable error.
rx_buf_overflow flag is too specific and no longer the only
condition this flag is used for. Therefore it is renamed as
wait_until_start_valid. This is more appropriate as this flag
is used to look for the next data chunk with SV bit set, after
failures like buffer overflow, buffer allocation failure, skb pointer
validity besides buffer overflow error.
Not writing to status0 if it reads 0. |
| In the Linux kernel, the following vulnerability has been resolved:
net/sched: cls_u32: fix duplicate handle when node ID pool is exhausted
gen_new_kid() falls back to returning max (htid | 0xFFF) when both
idr_alloc_u32() ranges are full, instead of reporting an error.
u32_change() trusts that value and inserts a new knode with a handle
that is already live in the hash table, breaking handle uniqueness
within the table's node ID space.
The handle was never reserved in ht->handle_idr, so every later error
path that does idr_remove(&ht->handle_idr, handle) removes the
reservation of a different, live knode, which is then reused — one
failed add compounds into further duplicates.
The 4095 limit is per (table, bucket) — ht->handle_idr is per hash
table and the range is derived from htid (bucketid), so a table with
divisor 256 can legitimately hold 256*4095 knodes.
The sibling helper gen_new_htid() has the same silent in-band failure:
it returns 0 when the tp_c handle pool (1..0x7FF) is full, and
u32_init() publishes the root hash table with handle 0 without
checking. Two root tables with handle 0 alias in u32_lookup_ht(),
allowing cross-tcf_proto knode add/lookup/delete. Add the same
exhaustion check that the divisor path already has.
Return an error so u32_change() fails with ENOSPC/ENOMEM when the
node ID space is exhausted, and so u32_init() fails with -ENOMEM
when the hash table ID space is exhausted. The extack message
distinguishes pool exhaustion (-ENOSPC) from a transient allocation
failure (-ENOMEM).
Conditions to recreate the bug:
- CONFIG_NET_SCHED=y, CONFIG_CLS_U32=y (or =m with module loaded)
- Create a clsact qdisc on a device, then add 4095 u32 filters with
auto-generated handles to fill the node ID space for the root hash
table (single bucket). The 4096th auto-handle filter add triggers
the duplicate handle (fh 800::fff reused). Reachable at Level 2
(unshare -Urn, namespace-local CAP_NET_ADMIN).
- For gen_new_htid: create 2047 u32 proto entries on the same block
to fill the tp_c handle pool, then create one more. The root table
gets handle 0 and aliases with other handle-0 root tables. |
| In the Linux kernel, the following vulnerability has been resolved:
igmp: convert struct ip_sf_list to RCU
Commit 23d2b94043ca ("igmp: Add ip_mc_list lock in ip_check_mc_rcu")
added spin_lock_bh(&im->lock) to ip_check_mc_rcu() to prevent a
use-after-free while iterating im->sources during concurrent deletions.
However, ip_check_mc_rcu() is called from RCU read-side critical
sections in packet receive and route lookup fast paths (e.g.
__mkroute_output(), ip_route_input_rcu(), and __udp4_lib_rcv()).
When igmpv3_send_cr() or igmpv3_send_report() holds &pmc->lock and
calls add_grec() -> igmpv3_newpack() -> ip_route_output_ports(),
an XFRM policy matching a multicast destination triggers
xfrm_tmpl_resolve_one() -> xfrm4_get_saddr() -> __mkroute_output() ->
ip_check_mc_rcu(). This attempts to acquire &im->lock while &pmc->lock
is already held on the same CPU, triggering a lockdep recursive locking
warning / deadlock.
Fix this by converting IPv4 struct ip_sf_list to RCU, mirroring the
IPv6 implementation in net/ipv6/mcast.c:
1. Add struct rcu_head to struct ip_sf_list and annotate sf_next,
sources, and tomb as __rcu pointers.
2. Use rcu_assign_pointer() and kfree_rcu() for list updates and
deletions.
3. Remove spin_lock_bh(&im->lock) from ip_check_mc_rcu() and traverse
im->sources locklessly with for_each_psf_rcu(), reading and writing
counter fields with READ_ONCE() and WRITE_ONCE().
Note: RCU conversion of /proc/net/mcfilter will be done in a
separate patch. |
| In the Linux kernel, the following vulnerability has been resolved:
ipv6: mcast: fix RCU list diversion in ip6_mc_del1_src()
When removing a source filter whose count reaches zero, ip6_mc_del1_src()
unlinks psf from pmc->mca_sources. If the filter was previously active,
the code moved psf directly into pmc->mca_tomb by updating psf->sf_next.
Because pmc->mca_sources is traversed locklessly under RCU (e.g. by
ipv6_chk_mcast_addr()), mutating psf->sf_next before a grace period
elapses diverts concurrent readers to the tombstone list. Consequently,
readers miss remaining active sources in pmc->mca_sources and improperly
examine deleted tombstone entries.
Fix this by allocating a new tombstone node for pmc->mca_tomb (as done
in sf_setstate()) and retiring the original psf via kfree_rcu(). |
