| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: RFCOMM: Fix session UAF in set_termios
rfcomm_tty_set_termios() tests dlc->session without rfcomm_mutex and
later passes the pointer to rfcomm_send_rpn(). The latter dereferences
both session->initiator and session->sock. Meanwhile, krfcommd can
unlink the DLC and free the session while holding rfcomm_mutex.
The race can proceed as follows:
TTY ioctl task krfcommd
-------------- --------
load dlc->session
enter rfcomm_send_rpn()
lock rfcomm_mutex
clear dlc->session
free session
unlock rfcomm_mutex
read session->initiator
KASAN reported:
BUG: KASAN: slab-use-after-free in rfcomm_send_rpn+0x297/0x2a0
Read of size 4 at addr ffff88810012a850 by task poc/92
Call Trace:
rfcomm_send_rpn+0x297/0x2a0
rfcomm_tty_set_termios+0x50d/0x850
tty_set_termios+0x596/0x950
set_termios+0x46a/0x6e0
tty_mode_ioctl+0x152/0xbd0
tty_ioctl+0x915/0x1240
__x64_sys_ioctl+0x134/0x1c0
Allocated by task 92:
rfcomm_session_add+0x9e/0x2e0
rfcomm_dlc_open+0x8b1/0xe00
rfcomm_dev_activate+0x85/0x1a0
rfcomm_tty_open+0x90/0x280
Freed by task 68:
kfree+0x131/0x3c0
rfcomm_session_del+0x119/0x180
rfcomm_run+0x737/0x4710
Add rfcomm_dlc_send_rpn(), which holds rfcomm_mutex while it verifies
that the DLC is still attached and sends the RPN frame. Have the TTY
path use the helper and drop its unlocked session check. This keeps the
session valid through both the frame construction and socket send. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: ath12k: fix NULL pointer dereference in rhash table destroy
When unbinding the ath12k driver, kernel NULL pointer dereferences
occur in irq_work_sync() called from rhashtable_destroy().
Two hash tables are affected:
1. ath12k_link_sta hash table in ath12k_base
2. ath12k_dp_link_peer hash table in ath12k_dp
The issue happens because the destroy functions are called unconditionally
in cleanup paths, but the hash tables are only initialized late in their
respective init functions. If the device was never fully started or if the
init functions failed before initializing the hash tables, the pointers
will be NULL. The issues are always reproducible from a VM because the MSI
addressing initialization is failing.
Call trace for ath12k_link_sta_rhash_tbl_destroy:
RIP: irq_work_sync+0x1e/0x70
rhashtable_destroy+0x12/0x60
ath12k_link_sta_rhash_tbl_destroy+0x19/0x40 [ath12k]
ath12k_core_stop+0xe/0x80 [ath12k]
ath12k_core_hw_group_cleanup+0x6b/0xb0 [ath12k]
ath12k_pci_remove+0x60/0x110 [ath12k]
Call trace for ath12k_dp_link_peer_rhash_tbl_destroy:
RIP: irq_work_sync+0x1e/0x70
rhashtable_destroy+0x12/0x60
ath12k_dp_link_peer_rhash_tbl_destroy+0x29/0x50 [ath12k]
ath12k_dp_cmn_device_deinit+0x21/0x140 [ath12k]
ath12k_core_hw_group_cleanup+0x6b/0xb0 [ath12k]
ath12k_pci_remove+0x60/0x110 [ath12k]
Fix this by adding NULL checks before calling rhashtable_destroy() in
both destroy functions.
The NULL check approach was chosen because the rhashtable pointer
serves as the initialization state indicator. The init can fail at
various points, leaving some components uninitialized. Checking the
pointer directly is simpler than adding separate state flags that
would need synchronization. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amdgpu/sdma5.2: replace BUG_ON() with WARN_ON()
There's no need to crash the kernel for these cases.
(cherry picked from commit ae658afc7f47f6147371ec42cc6b1a793dfdb5af) |
| The Food Menu WordPress plugin before 6.0.2 does not perform any capability or ownership check on its reservation-status update action, which is also exposed to unauthenticated users and gated only by a nonce that is publicly available to visitors, allowing unauthenticated attackers to change the status of arbitrary reservations. |
| The Customer Email Verification for WooCommerce WordPress plugin before 3.2.6 does not correctly validate the email-verification activation code, relying on a loose comparison that an attacker can satisfy with a crafted value type, allowing unauthenticated users to verify and take over the account of any registered user who has not yet confirmed their email address. |
| The Booking for Appointments and Events Calendar WordPress plugin before 2.4.6 does not verify that an authenticated employee (provider) is assigned to the appointment being accessed, allowing any employee to read any appointment by its identifier and disclose the booked customer's personal data. |
| The ShopEngine Elementor WooCommerce Builder Addon WordPress plugin before 4.9.3 does not protect one of its authentication endpoints against CSRF, allowing an attacker to log a victim into an attacker-controlled account, so that the billing and shipping details the victim then enters at checkout are stored under and readable by the attacker. |
| The PPWP – Password Protect Pages plugin for WordPress is vulnerable to Stored Cross-Site Scripting via the plugin's `ppwp` shortcode attributes in all versions up to, and including, 1.9.21 due to insufficient input sanitization and output escaping on user supplied attributes. This makes it possible for authenticated attackers, with contributor-level access and above, to inject arbitrary web scripts in pages that will execute whenever a user accesses an injected page. |
| Zohocorp ManageEngine Password Manager Pro versions before 13232 and ManageEngine PAM360 versions before 8552 are vulnerable to authenticated SQL injection. |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: hci_sync: Protect UUID list traversal
The hci_sync conversion moved class-of-device and EIR generation from an
HCI request built under hdev->lock to asynchronous command sync work.
The worker holds hdev->req_lock, but that lock does not serialize access
to hdev->uuids against add_uuid() and remove_uuid(), which update the
list under hdev->lock.
The following interleaving can therefore occur:
CPU0 (command sync work) CPU1 (management socket)
fetch uuid from the list
list_del(&uuid->list)
kfree(uuid)
read uuid->size
KASAN reports the resulting use-after-free:
BUG: KASAN: slab-use-after-free in eir_create+0xb8f/0xee0
Read of size 1 at addr ffff88810dbd8620 by task kworker/u17:0/87
Workqueue: hci0 hci_cmd_sync_work
Call Trace:
eir_create+0xb8f/0xee0
hci_update_eir_sync+0x1c0/0x330
hci_cmd_sync_work+0x13c/0x290
process_one_work+0x63a/0x1070
worker_thread+0x45b/0xd10
Allocated by task 86:
__kasan_kmalloc+0x8f/0xa0
add_uuid+0x18a/0x4b0
hci_sock_sendmsg+0x1033/0x1ea0
Freed by task 92:
__kasan_slab_free+0x43/0x70
kfree+0x131/0x3c0
remove_uuid+0x25e/0x560
hci_sock_sendmsg+0x1033/0x1ea0
Hold hdev->lock while generating and committing the class-of-device and
EIR snapshots. Release it before sending an HCI command, so controller
waits do not happen under the device lock. This protects all UUID list
walks in these paths and restores the serialization lost in the command
sync conversion. |
| In the Linux kernel, the following vulnerability has been resolved:
media: vivid: fix cleanup bugs in vivid_init()
When platform_device_register() fails in vivid_init(), the embedded
struct device in vivid_pdev has already been initialized by
device_initialize(), but the failure path jumps to free_output_strings
without dropping the device reference for the current platform device:
vivid_init()
-> platform_device_register(&vivid_pdev)
-> device_initialize(&vivid_pdev.dev)
-> setup_pdev_dma_masks(&vivid_pdev)
-> platform_device_add(&vivid_pdev)
This leads to a reference leak when platform_device_register() fails.
Fix this by calling platform_device_put() before jumping to the common
cleanup path.
Also, the unreg_driver label incorrectly calls
platform_driver_register() instead of platform_driver_unregister(),
which breaks cleanup when workqueue creation fails after successful
driver registration. Fix that as well.
The reference leak was identified by a static analysis tool I developed
and confirmed by manual review. The incorrect cleanup call was found
during code inspection. |
| In the Linux kernel, the following vulnerability has been resolved:
media: nuvoton: npcm-video: fix memory leaks in probe and remove
npcm_video_probe() allocates the npcm_video structure with kzalloc_obj()
but never frees it on any probe error path or in npcm_video_remove(),
leaking the allocation on every failed probe and every normal unbind.
Additionally, when npcm_video_setup_video() fails, the reserved memory
association established by of_reserved_mem_device_init() in
npcm_video_init() is not released, leaking the rmem_assigned_device
entry on the global list.
Fix both by adding kfree(video) to all probe error paths and to
npcm_video_remove(), and adding the missing
of_reserved_mem_device_release() call when npcm_video_setup_video()
fails. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/gpusvm: publish dpagemap early to avoid device mapping leak on error
drm_gpusvm_get_pages() only stored the local dpagemap into
svm_pages->dpagemap on the success path. If a later page failed (e.g.
-EOPNOTSUPP when ctx->allow_mixed is false) and jumped to err_unmap,
svm_pages->dpagemap was still NULL, so __drm_gpusvm_unmap_pages() skipped
device_unmap() and leaked the device mappings already created.
Assign svm_pages->dpagemap when the first device page is mapped so the
err_unmap path can device_unmap() those mappings.
This issue was found by Sashiko AI review. |
| Foxit PDF Editor/Reader inconsistently alerts users when signature fields are abnormally modified, including alterations to appearance, coordinates, or field duplication. This may mislead users into trusting tampered documents, since the UI cannot accurately reflect the actual integrity status of signatures. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: ath6kl: fix use-after-free in aggr_reset_state()
The aggr_reset_state() function uses timer_delete() (non-synchronous)
for the aggregation timer before proceeding to delete TID state and
before the structure is freed by callers like aggr_module_destroy().
If the timer callback (aggr_timeout) is executing when aggr_reset_state()
is called, the callback will continue to access aggr_conn fields like
rx_tid[] and stat[] which may be freed immediately after by
kfree(aggr_info->aggr_conn) in aggr_module_destroy().
Additionally, the timer callback can re-arm itself via mod_timer() while
aggr_reset_state() is running, creating a more complex race condition.
Use timer_delete_sync() instead to ensure any running timer callback
has completed before returning. |
| In the Linux kernel, the following vulnerability has been resolved:
media: vivid: check for vb2_is_busy() when toggling caps
The vivid_update_format_cap/out() functions must only be called if the
capture/output queue are not busy. But for the controls that select
the CROP/COMPOSE/SCALE capability that is not checked.
Only when streaming starts will they be set to 'grabbed' and it is
impossible to change the control, but between REQBUFS and STREAMON you
are still allowed to set these controls. Since vivid_update_format_cap/out
will change the format, this can cause unexpected results.
Besides adding these checks, also add a WARN_ON in
vivid_update_format_cap/out() if the queue is busy.
I'm 90% certain that this is the cause of this syzbot bug:
https://syzkaller.appspot.com/bug?extid=dac8f5eaa46837e97b89
But since we never have reproducers, it is hard to be certain. In any case,
these checks are needed regardless. |
| In the Linux kernel, the following vulnerability has been resolved:
media: v4l2-fwnode: Fix subdev owner overwritten in v4l2_async_register_subdev_sensor()
The v4l2 helper v4l2_async_register_subdev_sensor() calls
v4l2_async_register_subdev(), which is a macro that expands to
__v4l2_async_register_subdev(sd,THIS_MODULE). Since the macro is expanded
inside v4l2-fwnode.c, THIS_MODULE resolves to the v4l2-fwnode module
rather than the sensor driver module that originally set sd->owner. When
v4l2-fwnode is built-in, THIS_MODULE evaluates to NULL, which then
overwrites the sensor driver's owner with NULL.
This causes the problem that the sensor module's reference count is never
incremented during async registration, so the module can be removed while
the subdevice is still in use by a notifier (e.g., a CSI-2 receiver
bridge driver).
Fix this by renaming v4l2_async_register_subdev_sensor() to
__v4l2_async_register_subdev_sensor() with an added explicit module
argument and introducing a wrapper macro:
#define v4l2_async_register_subdev_sensor(sd) \
__v4l2_async_register_subdev_sensor(sd, THIS_MODULE)
This ensures the sensor driver module is properly referenced even when
the sensor driver does not init the owner field before calling
v4l2_async_register_subdev_sensor() and prevents premature module removal. |
| In the Linux kernel, the following vulnerability has been resolved:
media: pci: dm1105: Free allocated workqueue
Destroy allocated workqueue in remove() callback to free its resources,
thus fixing memory leak. |
| In the Linux kernel, the following vulnerability has been resolved:
media: nxp: imx8-isi: Add missing v4l2_subdev_cleanup() in crossbar and pipe
Both mxc_isi_crossbar_init() and mxc_isi_pipe_init() call
v4l2_subdev_init_finalize() which allocates the subdev active state,
but neither mxc_isi_crossbar_cleanup() nor mxc_isi_pipe_cleanup()
calls v4l2_subdev_cleanup() to free it.
This causes a memory leak on every rmmod, reported by kmemleak:
unreferenced object 0xffff0000d06fc800 (size 192):
comm "(udev-worker)", pid 254, jiffies 4294913455
backtrace (crc 36eeae58):
kmemleak_alloc+0x34/0x40
__kvmalloc_node_noprof+0x5f8/0x7d8
__v4l2_subdev_state_alloc+0x1fc/0x30c
__v4l2_subdev_init_finalize+0x178/0x368
Add the missing v4l2_subdev_cleanup() calls before media_entity_cleanup()
in both crossbar and pipe cleanup paths. |
| In the Linux kernel, the following vulnerability has been resolved:
media: meson: vdec: Fix memory leak in error path of vdec_open
The vdec_open() function previously jumped directly to
err_m2m_release when vdec_init_ctrls() failed, skipping
release of the m2m context. This caused a resource leak.
Fix it by introducing a proper err_m2m_ctx_release label
that calls v4l2_m2m_ctx_release(sess->m2m_ctx) before
releasing the m2m device.
This was identified via kmemleak:
unreferenced object 0xffff0000205d6878 (size 8):
comm "v4l_id", pid 5289, jiffies 4294938580
hex dump (first 8 bytes):
40 d2 49 18 00 00 ff ff @.I.....
backtrace (crc d3204599):
kmemleak_alloc+0xc8/0xf0
__kvmalloc_node_noprof+0x60c/0x850
v4l2_ctrl_handler_init_class+0x1b4/0x2e8 [videodev]
vdec_open+0x1f4/0x788 [meson_vdec]
v4l2_open+0x144/0x460 [videodev]
chrdev_open+0x1ac/0x500
do_dentry_open+0x3f0/0xfe8
vfs_open+0x68/0x320
do_open+0x2d8/0x9a8
path_openat+0x1d0/0x4f0
do_filp_open+0x190/0x380
do_sys_openat2+0xf8/0x1b0
__arm64_sys_openat+0x13c/0x1e8
invoke_syscall+0xdc/0x268
el0_svc_common.constprop.0+0x178/0x258
do_el0_svc+0x4c/0x70 |
