| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| nimiq/core-rs-albatross is a Rust implementation of the Nimiq Proof-of-Stake protocol based on the Albatross consensus algorithm. In versions 1.2.2 and below, an unauthenticated p2p peer can cause the RequestMacroChain message handler task to panic. Sending a RequestMacroChain message where the first locator hash on the victim’s main chain is a micro block hash (not a macro block hash) causes said panic. The RequestMacroChain::handle handler selects the locator based only on "is on main chain", then calls get_macro_blocks() and panics via .unwrap() when the selected hash is not a macro block (BlockchainError::BlockIsNotMacro). This issue has been fixed in version 1.3.0. |
| Open WebUI is a self-hosted artificial intelligence platform designed to operate entirely offline. Versions 0.7.2 and below contain a Blind Server Side Request Forgery in the functionality that allows editing an image via a prompt. The affected function performs a GET request to a user-provided URL with no restriction on the domain, allowing the local address space to be accessed. Since the SSRF is blind (the response cannot be read), the primary impact is port scanning of the local network, as whether a port is open can be determined based on whether the GET request succeeds or fails. These response differentials can be automated to iterate through the entire port range and identify open ports. If the service running on an open port can be inferred, an attacker may be able to interact with it in a meaningful way, provided the service offers state-changing GET request endpoints. This issue was unresolved at the time of publication. |
| An Improper Access Control vulnerability could allow a malicious actor with access to the UniFi Play network to enable SSH to make unauthorized changes to the system.
Affected Products:
UniFi Play PowerAmp (Version 1.0.35 and earlier)
UniFi Play Audio Port (Version 1.0.24 and earlier)
Mitigation:
Update UniFi Play PowerAmp to Version 1.0.38 or later
Update UniFi Play Audio Port to Version 1.1.9 or later |
| An Improper Input Validation vulnerability could allow a malicious actor with access to the UniFi Play network to cause the device to stop responding.
Affected Products:
UniFi Play PowerAmp (Version 1.0.35 and earlier)
UniFi Play Audio Port (Version 1.0.24 and earlier)
Mitigation:
Update UniFi Play PowerAmp to Version 1.0.38 or later
Update UniFi Play Audio Port to Version 1.1.9 or later |
| An Improper Access Control vulnerability could allow a malicious actor with access to the UniFi Play network to obtain UniFi Play WiFi credentials.
Affected Products:
UniFi Play PowerAmp (Version 1.0.35 and earlier)
UniFi Play Audio Port (Version 1.0.24 and earlier)
Mitigation:
Update UniFi Play PowerAmp to Version 1.0.38 or later
Update UniFi Play Audio Port to Version 1.1.9 or later |
| jq is a command-line JSON processor. In versions 1.8.1 and below, functions jv_setpath(), jv_getpath(), and delpaths_sorted() in jq's src/jv_aux.c use unbounded recursion whose depth is controlled by the length of a caller-supplied path array, with no depth limit enforced. An attacker can supply a JSON document containing a flat array of ~65,000 integers (~200 KB) that, when used as a path argument by a trusted jq filter, exhausts the C call stack and crashes the process with a segmentation fault (SIGSEGV). This bypass works because the existing MAX_PARSING_DEPTH (10,000) limit only protects the JSON parser, not runtime path operations where arrays can be programmatically constructed to arbitrary lengths. The impact is denial of service (unrecoverable crash) affecting any application or service that processes untrusted JSON input through jq's setpath, getpath, or delpaths builtins. This issue has been addressed in commit fb59f1491058d58bdc3e8dd28f1773d1ac690a1f. |
| jq is a command-line JSON processor. Before commit 0c7d133c3c7e37c00b6d46b658a02244fdd3c784, jq used MurmurHash3 with a hardcoded, publicly visible seed (0x432A9843) for all JSON object hash table operations, which allowed an attacker to precompute key collisions offline. By supplying a crafted JSON object (~100 KB) where all keys hashed to the same bucket, hash table lookups degraded from O(1) to O(n), turning any jq expression into an O(n²) operation and causing significant CPU exhaustion. This affected common jq use cases such as CI/CD pipelines, web services, and data processing scripts, and was far more practical to exploit than existing heap overflow issues since it required only a small payload. This issue has been patched in commit 0c7d133c3c7e37c00b6d46b658a02244fdd3c784. |
| External Secrets Operator reads information from a third-party service and automatically injects the values as Kubernetes Secrets. Versions 2.2.0 and below contain a vulnerability in runtime/template/v2/template.go where the v2 template engine removes env and expandenv from Sprig's TxtFuncMap() but leaves the getHostByName function accessible to user-controlled templates. Since ESO executes templates within the controller process, an attacker who can create or update templated ExternalSecret resources can invoke controller-side DNS lookups using secret-derived values. This creates a DNS exfiltration primitive, allowing fetched secret material to be leaked via DNS queries without requiring direct outbound network access from the attacker's workload. The impact is a confidentiality issue, particularly in environments where untrusted or lower-trust users can author templated ExternalSecret resources and the controller has DNS resolution capability. This issue has been fixed in version 2.3.0. |
| A malicious actor with access to the UniFi Play network could exploit a Path Traversal vulnerability found in the device firmware to write files on the system that could be used for a remote code execution (RCE).
Affected Products:
UniFi Play PowerAmp (Version 1.0.35 and earlier)
UniFi Play Audio Port (Version 1.0.24 and earlier)
Mitigation:
Update UniFi Play PowerAmp to Version 1.0.38 or later
Update UniFi Play Audio Port to Version 1.1.9 or later |
| Zammad is a web based open source helpdesk/customer support system. Prior to 7.0.1 and 6.5.4, the SSO mechanism in Zammad was not verifying the header originates from a trusted SSO proxy/gateway before applying further actions on it. This vulnerability is fixed in 7.0.1 and 6.5.4. |
| SourceCodester Storage Unit Rental Management System v1.0 is vulnerable to SQL Injection in the file /storage/admin/maintenance/manage_storage_unit.php. |
| Improper neutralization of input during web page generation ('cross-site scripting') vulnerability in OpenText™ Vertica allows Reflected XSS.
The vulnerability could lead to Reflected XSS attack of cross-site scripting in Vertica management console application.This issue affects Vertica: from 10.0 through 10.X, from 11.0 through 11.X, from 12.0 through 12.X, from 23.0 through 23.X, from 24.0 through 24.X, from 25.1.0 through 25.1.X, from 25.2.0 through 25.2.X, from 25.3.0 through 25.3.X. |
| An issue in Hostbill v.2025-11-24 and 2025-12-01 allows a remote attacker to execute arbitrary code and escalate privileges via the CSV registration field |
| Improper neutralization of argument delimiters in a command ('argument injection') vulnerability in upKeeper Solutions upKeeper Instant Privilege Access allows Hijacking a Privileged Thread of Execution.This issue affects upKeeper Instant Privilege Access: through 1.5.0. |
| The OECH1 prefix encoding is intended to obfuscate values across the OpenEdge platform. It has been identified as cryptographically weak and unsuitable for stored encodings and enterprise applications. OECH1 encodings should be considered exploitable and immediately replaced by any other supported prefix encoding, all of which are based on symmetric encryption. |
| .NET misconfiguration: use of impersonation vulnerability in upKeeper Solutions upKeeper Instant Privilege Access allows Hijacking a Privileged Thread of Execution.This issue affects upKeeper Instant Privilege Access: through 1.5.0. |
| Kiuwan SAST improperly authorizes SSO logins for locally disabled mapped user accounts, allowing disabled users to continue accessing the application. Kiuwan Cloud was affected, and Kiuwan SAST on-premise (KOP) was affected before 2.8.2509.4. |
| A vulnerability was identified in OpenAI Codex CLI v0.23.0 and before that enables code execution through malicious MCP (Model Context Protocol) configuration files. The attack is triggered when a user runs the codex command inside a malicious or compromised repository. Codex automatically loads project-local .env and .codex/config.toml files without requiring user confirmation, allowing attackers to embed arbitrary commands that execute immediately. |
| In Eclipse Jetty, the HTTP/1.1 parser is vulnerable to request smuggling when chunk extensions are used, similar to the "funky chunks" techniques outlined here:
* https://w4ke.info/2025/06/18/funky-chunks.html
* https://w4ke.info/2025/10/29/funky-chunks-2.html
Jetty terminates chunk extension parsing at \r\n inside quoted strings instead of treating this as an error.
POST / HTTP/1.1
Host: localhost
Transfer-Encoding: chunked
1;ext="val
X
0
GET /smuggled HTTP/1.1
...
Note how the chunk extension does not close the double quotes, and it is able to inject a smuggled request. |
| A vulnerability in the AdminServer component of OpenEdge on all supported platforms grants its authenticated users OS-level access to the server
through the adopted authority of the AdminServer process itself. The delegated authority of the AdminServer could allow its users the ability to read arbitrary files on the host system through the misuse of the setFile() and openFile()
methods exposed through the RMI interface. Misuse was limited only by OS-level authority of the AdminServer's elevated
privileges granted and the user's access to these methods enabled through RMI. The exploitable methods have been removed thus eliminating their access through RMI or downstream of the RMI registry. |
