| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| The traceroute diagnostic handler in /bin/httpd_clientside for ALTICE LABS / SFR France GR140DG and GR140IG fibre CPE/Router/Gateway, inserts unsanitized user input into a system() call, allowing authenticated remote attackers to execute arbitrary commands as root via crafted destAddr parameters using shell command substitution. |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: L2CAP: Fix type confusion in l2cap_ecred_reconf_rsp()
l2cap_ecred_reconf_rsp() casts the incoming data to struct
l2cap_ecred_conn_rsp (the ECRED *connection* response, 8 bytes with
result at offset 6) instead of struct l2cap_ecred_reconf_rsp (2 bytes
with result at offset 0).
This causes two problems:
- The sizeof(*rsp) length check requires 8 bytes instead of the
correct 2, so valid L2CAP_ECRED_RECONF_RSP packets are rejected
with -EPROTO.
- rsp->result reads from offset 6 instead of offset 0, returning
wrong data when the packet is large enough to pass the check.
Fix by using the correct type. Also pass the already byte-swapped
result variable to BT_DBG instead of the raw __le16 field. |
| In the Linux kernel, the following vulnerability has been resolved:
ext4: always drain queued discard work in ext4_mb_release()
While reviewing recent ext4 patch[1], Sashiko raised the following
concern[2]:
> If the filesystem is initially mounted with the discard option,
> deleting files will populate sbi->s_discard_list and queue
> s_discard_work. If it is then remounted with nodiscard, the
> EXT4_MOUNT_DISCARD flag is cleared, but the pending s_discard_work is
> neither cancelled nor flushed.
[1] https://lore.kernel.org/r/20260319094545.19291-1-qiang.zhang@linux.dev/
[2] https://sashiko.dev/#/patchset/20260319094545.19291-1-qiang.zhang%40linux.dev
The concern was valid, but it had nothing to do with the patch[1].
One of the problems with Sashiko in its current (early) form is that
it will detect pre-existing issues and report it as a problem with the
patch that it is reviewing.
In practice, it would be hard to hit deliberately (unless you are a
malicious syzkaller fuzzer), since it would involve mounting the file
system with -o discard, and then deleting a large number of files,
remounting the file system with -o nodiscard, and then immediately
unmounting the file system before the queued discard work has a change
to drain on its own.
Fix it because it's a real bug, and to avoid Sashiko from raising this
concern when analyzing future patches to mballoc.c. |
| In KDE KCoreAddons before 6.25, KShell::quoteArgs is intended to safely quote arguments so that they can be passed to a shell command. This parsing does not adequately handle metacharacters, leading to an escape from the shell. All applications relying on this method in a security-critical path to handle user input are affected and could be exploited. In particular, because sendInput() sends a string to a terminal, a control character such as \x01 can be used during injection. |
| An authenticated administrative user who can import or save DataObject class definitions can inject attacker-controlled composite index metadata and trigger unintended SQL execution in the backend.
This issue affects pimcore: 12.3.3. |
| Allocation of Resources Without Limits or Throttling vulnerability in Apache HTTP Server's mod_md via OCSP response data.
This issue affects Apache HTTP Server: from 2.4.30 through 2.4.66.
Users are recommended to upgrade to version 2.4.67, which fixes the issue. |
| Dell PowerProtect Data Domain with Data Domain Operating System (DD OS) of Feature Release versions 7.7.1.0 through 8.5, LTS2025 release version 8.3.1.0 through 8.3.1.20, LTS2024 release versions 7.13.1.0 through 7.13.1.50, contain an exposure of sensitive information to an unauthorized actor vulnerability. A low privileged attacker with remote access could potentially exploit this vulnerability, leading to information exposure. |
| goshs is a SimpleHTTPServer written in Go. Prior to version 2.0.2, the PUT upload handler (httpserver/updown.go) lacks the CSRF token validation that was added to the POST upload handler during the CVE-2026-40883 fix. Combined with the unconditional Access-Control-Allow-Origin: * on the OPTIONS preflight handler (httpserver/server.go), any website can write arbitrary files to a goshs instance through the victim's browser — bypassing network isolation (e.g. localhost, internal network). This issue has been patched in version 2.0.2. |
| XML External Entity (XXE) via Unsanitized Dictionary Parsing in Apache OpenNLP DictionaryEntryPersistor
Versions Affected: before 2.5.9, before 3.0.0-M3
Description: The DictionaryEntryPersistor class initializes a static SAXParserFactory at class-load time without enabling FEATURE_SECURE_PROCESSING or disabling DTD processing. When create(InputStream, EntryInserter) is invoked, the only feature set on the XMLReader is namespace support — external entity resolution and DOCTYPE declarations remain fully enabled. An attacker who can supply a crafted dictionary file (e.g., a stop-word list or domain dictionary) containing a malicious DOCTYPE declaration can trigger local file disclosure via file:// entity references or server-side request forgery via http:// entity references during SAX parsing, before the application processes a single dictionary entry. This is inconsistent with the project's own XmlUtil.createSaxParser() helper, which correctly sets FEATURE_SECURE_PROCESSING and disallow-doctype-decl and is used by all other XML parsing paths in the codebase. The public Dictionary(InputStream) constructor delegates directly to this method and is the documented API for loading user-supplied dictionaries, making untrusted input a realistic scenario.
Mitigation: 2.x users should upgrade to 2.5.9. 3.x users should upgrade to 3.0.0-M3. Users who cannot upgrade immediately should ensure that all dictionary files are sourced from trusted origins and should consider wrapping the Dictionary(InputStream) constructor with input validation that rejects any XML containing a DOCTYPE declaration before it reaches the parser. |
| Buffer Overflow vulnerability exists in Assimp versions up to 6.0.2 in the FBX Importer. The vulnerability occurs in aiMaterial::AddBinaryProperty, where a property key string from a crafted FBX file is copied into a fixed-size heap buffer using strcpy() without runtime length validation |
| OOM Denial of Service via Unbounded Array Allocation in Apache OpenNLP AbstractModelReader
Versions Affected:
before 2.5.9
before 3.0.0-M3
Description:
The AbstractModelReader methods getOutcomes(), getOutcomePatterns(), and getPredicates() each read a 32-bit signed integer count field from a binary model stream and pass that value directly to an array allocation (new String[numOutcomes], new int[numOCTypes][], new String[NUM_PREDS]) without validating that the value is non-negative or within a reasonable bound. The count is therefore fully attacker-controlled when the model file originates from an untrusted source.
A crafted .bin model file in which any of these count fields is set to Integer.MAX_VALUE (or any value large enough to exhaust the available heap) triggers an OutOfMemoryError at the array allocation itself, before the corresponding label or pattern data is consumed from the stream. The error occurs very early in deserialization: for a GIS model, getOutcomes() is reached after only the model-type string, the correction constant, and the correction parameter have been read; so the attacker pays no meaningful size cost to weaponize a payload, and a single small file can crash a JVM that loads it. Any code path that deserializes a .bin model is affected, including direct use of GenericModelReader and any higher-level component that delegates to it during model load.
The practical impact is denial of service against processes that load model files from untrusted or semi-trusted origins.
Mitigation:
* 2.x users should upgrade to 2.5.9.
* 3.x users should upgrade to 3.0.0-M3.
Note: The fix introduces an upper bound on each of the three count fields, checked before array allocation; counts that are negative or exceed the bound cause an IllegalArgumentException to be thrown and the read to fail fast with no large allocation. The default bound is 10,000,000, which is well above the entry counts of legitimate OpenNLP models but far below any value that would threaten heap exhaustion. Deployments that legitimately need to load models with more entries than the default can raise the limit at JVM startup by setting the OPENNLP_MAX_ENTRIES system property to the desired positive integer (e.g. -DOPENNLP_MAX_ENTRIES=50000000); invalid or non-positive values fall back to the default.
Users who cannot upgrade immediately should treat all .bin model files as untrusted input unless their provenance is verified, and should avoid loading models supplied by end users or fetched from third-party repositories without integrity checks. |
| An issue was discovered in Gambio 4.9.2.0 (patched in 2024-02 v1.0.0 for GX4 v4.0.0.0 to v4.9.2.0). The password reset function can be bypassed to set arbitrary passwords for arbitrary accounts if the ID is known. |
| IEEE 802.11 protocol dissector crash in Wireshark 4.6.0 to 4.6.4 |
| The Zingaya Click-to-Call plugin for WordPress is vulnerable to Reflected Cross-Site Scripting via the 'email', 'first_name', 'last_name', and 'phone' parameters on the plugin's sign-up admin page in all versions up to, and including, 1.0. This is due to insufficient input sanitization and output escaping. This makes it possible for unauthenticated attackers to inject arbitrary web scripts in pages that execute if they can successfully trick a user into performing an action such as clicking on a link. |
| In the Linux kernel, the following vulnerability has been resolved:
drivers: media: dvb-frontends/rtl2832: fix an out-of-bounds write error
Ensure index in rtl2832_pid_filter does not exceed 31 to prevent
out-of-bounds access.
dev->filters is a 32-bit value, so set_bit and clear_bit functions should
only operate on indices from 0 to 31. If index is 32, it will attempt to
access a non-existent 33rd bit, leading to out-of-bounds access.
Change the boundary check from index > 32 to index >= 32 to resolve this
issue.
[hverkuil: added fixes tag, rtl2830_pid_filter -> rtl2832_pid_filter in logmsg] |
| The Subscribe To Comments Reloaded plugin for WordPress is vulnerable to unauthorized modification of data due to a leaked secret key and usage of a weak hash generation algorithm in all versions up to, and including, 240119. This makes it possible for unauthenticated attackers to extract the global key from any public post page, forge authorization keys and manage comment subscription preferences for arbitrary users |
| In the Linux kernel, the following vulnerability has been resolved:
drivers: media: dvb-frontends/rtl2830: fix an out-of-bounds write error
Ensure index in rtl2830_pid_filter does not exceed 31 to prevent
out-of-bounds access.
dev->filters is a 32-bit value, so set_bit and clear_bit functions should
only operate on indices from 0 to 31. If index is 32, it will attempt to
access a non-existent 33rd bit, leading to out-of-bounds access.
Change the boundary check from index > 32 to index >= 32 to resolve this
issue. |
| RedwoodSDK is a server-first React framework. From 1.0.0-beta.50 to 1.0.5, erver functions exported from "use server" files could be invoked via GET requests, bypassing their intended HTTP method. In cookie-authenticated applications, this allowed cross-site GET navigations to trigger state-changing functions, because browsers send SameSite=Lax cookies on top-level GET requests. This affected all server functions -- both serverAction() handlers and bare exported functions in "use server" files. This vulnerability is fixed in 1.0.6. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amd/pm: Fix negative array index read
Avoid using the negative values
for clk_idex as an index into an array pptable->DpmDescriptor.
V2: fix clk_index return check (Tim Huang) |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amd/display: Skip inactive planes within ModeSupportAndSystemConfiguration
[Why]
Coverity reports Memory - illegal accesses.
[How]
Skip inactive planes. |
