| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| PyTorch torchvision through 0.28.0, fixed in commit 4e05dc2, contains an out-of-bounds heap read vulnerability in the GIF decoder's read_from_tensor callback that passes unclamped length to memcpy. Attackers can supply malicious or truncated GIF files to cause denial of service via segmentation fault or disclose adjacent heap memory contents. |
| Meshery before 1.0.57 contains an unauthenticated arbitrary file read vulnerability in the /api/system/fileView and /api/system/fileDownload endpoints that pass user-supplied file parameters directly to os.Open without path validation. Attackers can supply absolute paths or traversal sequences in the file parameter to read arbitrary files from the host filesystem without authentication. |
| Datasets through 5.00, fixed in commit ad2d853, contains a symlink-following vulnerability in Extractor.extract() that allows local attackers to write arbitrary files by pre-planting symlinks at predictable output paths. Attackers can redirect archive extraction to arbitrary filesystem locations in shared-cache environments, enabling overwrite of sensitive files and potential privilege escalation or code execution. |
| In the Linux kernel, the following vulnerability has been resolved:
net: nexthop: Increase weight to u16
In CLOS networks, as link failures occur at various points in the network,
ECMP weights of the involved nodes are adjusted to compensate. With high
fan-out of the involved nodes, and overall high number of nodes,
a (non-)ECMP weight ratio that we would like to configure does not fit into
8 bits. Instead of, say, 255:254, we might like to configure something like
1000:999. For these deployments, the 8-bit weight may not be enough.
To that end, in this patch increase the next hop weight from u8 to u16.
Increasing the width of an integral type can be tricky, because while the
code still compiles, the types may not check out anymore, and numerical
errors come up. To prevent this, the conversion was done in two steps.
First the type was changed from u8 to a single-member structure, which
invalidated all uses of the field. This allowed going through them one by
one and audit for type correctness. Then the structure was replaced with a
vanilla u16 again. This should ensure that no place was missed.
The UAPI for configuring nexthop group members is that an attribute
NHA_GROUP carries an array of struct nexthop_grp entries:
struct nexthop_grp {
__u32 id; /* nexthop id - must exist */
__u8 weight; /* weight of this nexthop */
__u8 resvd1;
__u16 resvd2;
};
The field resvd1 is currently validated and required to be zero. We can
lift this requirement and carry high-order bits of the weight in the
reserved field:
struct nexthop_grp {
__u32 id; /* nexthop id - must exist */
__u8 weight; /* weight of this nexthop */
__u8 weight_high;
__u16 resvd2;
};
Keeping the fields split this way was chosen in case an existing userspace
makes assumptions about the width of the weight field, and to sidestep any
endianness issues.
The weight field is currently encoded as the weight value minus one,
because weight of 0 is invalid. This same trick is impossible for the new
weight_high field, because zero must mean actual zero. With this in place:
- Old userspace is guaranteed to carry weight_high of 0, therefore
configuring 8-bit weights as appropriate. When dumping nexthops with
16-bit weight, it would only show the lower 8 bits. But configuring such
nexthops implies existence of userspace aware of the extension in the
first place.
- New userspace talking to an old kernel will work as long as it only
attempts to configure 8-bit weights, where the high-order bits are zero.
Old kernel will bounce attempts at configuring >8-bit weights.
Renaming reserved fields as they are allocated for some purpose is commonly
done in Linux. Whoever touches a reserved field is doing so at their own
risk. nexthop_grp::resvd1 in particular is currently used by at least
strace, however they carry an own copy of UAPI headers, and the conversion
should be trivial. A helper is provided for decoding the weight out of the
two fields. Forcing a conversion seems preferable to bending backwards and
introducing anonymous unions or whatever. |
| The Appriss Insights (Equifax) Victim Information Notification Exchange (VINE) applications allow an unauthenticated attacker to send a specially-crafted request to bypass the login page, access other users' credentials, take over other user accounts, access sensitive PII, and dump other information from the database. |
| nebula-mesh is a self-hosted control plane for Slack Nebula mesh virtual private network. Prior to version 0.3.2, `internal/configgen/generator.go:86,108,119` interpolates the operator-supplied `ListenHost` and `TunDevice` fields raw into a `text/template` that produces the agent's `config.yml`. `internal/web/advanced.go:20-35` accepts both with only `strings.TrimSpace` — no character or shape validation. Version 0.3.2 fixes the issue. |
| The WPO365 | Login plugin for WordPress is vulnerable to Cross-Site Request Forgery in versions up to, and including, 43.2. This is due to the Ajax_Service::verify_ajax_request() helper gating its wp_verify_nonce() call behind the boolean option 'enable_nonce_check', which is absent from the default 'wpo365_options' array and therefore evaluates to false via get_global_boolean_var(); as a result, the wp_ajax_wpo365_update_settings handler (Ajax_Service::update_settings) accepts POSTs from cross-origin pages and forwards the attacker-supplied 'settings' payload (base64/JSON) to Options_Service::update_options(), which merges every key/value into wpo365_options without a key allowlist. This makes it possible for unauthenticated attackers to overwrite arbitrary plugin options — including enabling the SCIM REST endpoint (enable_scim), planting an attacker-known scim_secret_token, and setting new_usr_default_role to 'administrator' — via a forged request granted they can trick a site administrator into performing an action such as clicking on a link. |
| nebula-mesh is a self-hosted control plane for Slack Nebula mesh virtual private network. Prior to version 0.3.1, none of the response paths in `internal/web/` or `internal/api/` set the standard browser-security headers. `grep` for `Content-Security-Policy`, `X-Frame-Options`, `Strict-Transport-Security`, `X-Content-Type-Options`, `Referrer-Policy` returns zero matches across the codebase. Version 0.3.1 fixes the issue. |
| Victor SSRF vulnerability in Johnson Controls CCure 9000 and victor application server allows Server Side Request Forgery.
This issue affects CCure 9000 and victor application server: from 2.9 through 3.0. |
| nebula-mesh is a self-hosted control plane for Slack Nebula mesh virtual private network. Prior to version 0.3.4, the `/api/v1/*` route surface trusts the bearer token alone for authorisation on most endpoints. The codebase itself admits this at `internal/api/hosts.go:384`: "API trusts the bearer token for authorisation; per-CA ownership is enforced only in the Web layer." The Web UI gates state-changing routes through `loadAccessibleCA` (`internal/web/cas.go`); CA-management endpoints in `internal/api/cas.go` ALSO have proper `canAccessCA` gates. The gap is on the host, network, firewall, mobile-bundle, and most operator endpoints. Combined with the per-operator CA model from ADR 0002, this gives any non-admin operator API key broad cross-tenant access — instant privilege escalation in the worst case. Version 0.3.4 fixes the issue. |
| A bug in the entropy initialization for SiWx917 causes the DRBG to use a predictable seed. As such, all random numbers generated in the Matter code use the same stream of numbers. This vulnerability was discovered after the impacted repository was already deprecated. |
| Pronetiqs IntraVUE Versions 3.2.1a14 and prior have a plaintext storage of a password vulnerability that could expose cleartext credentials through the API. |
| Pronetiqs IntraVUE versions 3.2.1a14 and prior have an unintended proxy or intermediary vulnerability which could allow an attacker to use an active proxy, which would bypass OT segmentation. |
| Pronetiqs IntraVUE versions 3.2.1a14 and prior have an exposure of sensitive system information to an unauthorized control sphere vulnerability which could allow for asset discovery by unauthenticated users. |
| Pronetiqs IntraVUE versions 3.2.1a14 and prior have an inadequate encryption strength vulnerability which could allow an attacker to steal admin credentials via weak hash or a pass-the-hash attack. |
| Pronetiqs IntraVUE versions 3.2.1a14 and prior have an exposure of sensitive system information to an unauthorized control sphere vulnerability which could expose the underlying host/share filesystem. |
| The Wpify Woo plugin for WordPress is vulnerable to Privilege Escalation in versions up to, and including, 5.4.16. This is due to the SettingsApi::save_option() REST route (POST /wp-json/wpify-woo/v1/option) passing the request-supplied 'option' and 'data' parameters directly to update_option() without any option-name allowlist or value sanitization, while the permission_callback only verifies the manage_woocommerce capability. This makes it possible for authenticated attackers, with Shop Manager-level access and above, to elevate their privileges to Administrator by overwriting arbitrary WordPress options (for example setting default_role to administrator and users_can_register to 1, or disabling security plugins via active_plugins). |
| Multiple security vulnerabilities in Snowflake libsnowflakeclient versions prior to 2.9.2 could allow remote code execution and credential exfiltration. A stack-based buffer overflow in the file download path could allow remote code execution on a victim host. An attacker could exploit this by uploading a file with a crafted encryption metadata field to a shared internal stage that a victim process later downloads, and impact would be limited to deployments where principals with different privilege levels share the same internal stage. A related out-of-bounds write in the same download path could allow memory corruption with attacker-controlled write primitives. An attacker may exploit this through a crafted initialization vector metadata field on a shared stage, and impact would be limited by the same stage-write precondition. Improper validation of connection parameters could allow an attacker-controlled input to redirect outbound authentication requests — including credentials and tokens — to an attacker-controlled endpoint. Impact is limited to embedding deployments where a lower-privileged principal can influence connection configuration while higher-privileged service credentials are in use. The fix is available in Snowflake libsnowflakeclient version 2.9.2. The Snowflake PHP PDO Driver and Snowflake ODBC Driver embed the affected library; fixes are available in versions 4.1.0 and 3.19.0 respectively. Users must manually upgrade. |
| The Cozy Blocks – Page Builder for Gutenberg Editor & FSE with 600+ Patterns, 58 Blocks & Templates plugin for WordPress is vulnerable to Stored Cross-Site Scripting via 'cozyCustomFont' Block Attribute in all versions up to, and including, 2.2.11 due to insufficient input sanitization and output escaping. This makes it possible for authenticated attackers, with contributor-level access and above, to inject arbitrary web scripts in pages that will execute whenever a user accesses an injected page. |
| The Open User Map – Interactive Leaflet Maps plugin for WordPress is vulnerable to Stored Cross-Site Scripting via Shortcode Attributes in all versions up to, and including, 1.4.45 due to insufficient input sanitization and output escaping. This makes it possible for authenticated attackers, with contributor-level access and above, to inject arbitrary web scripts in pages that will execute whenever a user accesses an injected page. The attack does not require post publication; a Contributor submitting a post for pending review is sufficient, as the payload executes when an Administrator opens the pending-review preview. |
