| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
jbd2: fix integer underflow in jbd2_journal_initialize_fast_commit()
jbd2_journal_initialize_fast_commit() validates journal capacity by
checking (journal->j_last - num_fc_blks < JBD2_MIN_JOURNAL_BLOCKS).
Both j_last and num_fc_blks are unsigned, so when num_fc_blks exceeds
j_last the subtraction wraps to a large value, bypassing the bounds
check.
The resulting underflow corrupts j_last, j_fc_first, and j_free,
leading to journal abort.
Fix by checking num_fc_blks against j_last before the subtraction,
returning -EFSCORRUPTED. |
| In the Linux kernel, the following vulnerability has been resolved:
batman-adv: tt: prevent TVLV OOB check overflow
A TT unicast TVLV contains the number of VLANs stored in it. This number is
an u16 and gets multiplied by the size of the struct
batadv_tvlv_tt_vlan_data (8 bytes). The size can therefore overflow the u16
used to store the tt_vlan_len. All additional safety checks to prevent
out-of-bounds access of the TVLV buffer are invalid due to this overflow.
Using size_t prevents this overflow and ensures that the safety checks
compare against the actual buffer requirements. |
| In the Linux kernel, the following vulnerability has been resolved:
nvmet-auth: reject short AUTH_RECEIVE buffers
nvmet_execute_auth_receive() trusts the AUTH_RECEIVE allocation length
after checking only that it is nonzero and matches the transfer length.
In the SUCCESS1 and FAILURE1/default states, that lets a remote NVMe-oF
initiator reach the fixed-size DH-HMAC-CHAP response builders with a
kmalloc() buffer shorter than the response, so nvmet_auth_success1() and
nvmet_auth_failure1() write past the allocation; both only WARN_ON the
short length and then format the message anyway.
Impact: A remote NVMe-oF initiator with access to an auth-enabled target
can trigger a 16-byte heap out-of-bounds write via a one-byte
AUTH_RECEIVE allocation length.
Compute the minimum response length for the current DH-HMAC-CHAP step in
nvmet_auth_receive_data_len() and report a zero data length when the
host-supplied allocation length is shorter, so the existing zero-length
check in nvmet_execute_auth_receive() rejects the command before any
builder runs. The SUCCESS1 minimum is sizeof(struct
nvmf_auth_dhchap_success1_data) plus the HMAC hash length, because the
response hash is written into the rval[] flexible-array tail, so the
minimum is state dependent rather than a flat sizeof. CHALLENGE keeps its
existing variable-length guard in nvmet_auth_challenge().
This is reachable only when in-band DH-HMAC-CHAP authentication is
configured on the target. |
| In the Linux kernel, the following vulnerability has been resolved:
i2c: imx: fix locked bus on SMBus block-read of 0 (atomic)
SMBus 3.1 6.5.7 allows a Block Read byte count of 0, but the atomic
(polling) path rejects it as -EPROTO. Worse, it returns without a
NACK+STOP: the next receive cycle has already started, so the target
keeps holding SDA and the bus stays stuck until a power cycle for
this i2c controller.
Reading I2DR to obtain the count likewise arms the next byte on the
count > I2C_SMBUS_BLOCK_MAX path, which also returned -EPROTO directly
and left the bus held.
Handle both: NACK the in-flight dummy byte (TXAK) and extend msgs->len so
the existing last-byte handling emits STOP; the dummy byte is discarded.
A count of 0 is a valid empty block read; a count above
I2C_SMBUS_BLOCK_MAX is still reported as -EPROTO, but only after the bus
has been released.
The interrupt-driven path has the same flaw from a later commit and is
fixed separately, as it carries a different Fixes: tag and stable range. |
| In the Linux kernel, the following vulnerability has been resolved:
dmaengine: dw-edma: Add spinlock to protect DONE_INT_MASK and ABORT_INT_MASK
The DONE_INT_MASK and ABORT_INT_MASK registers are shared by all DMA
channels, and modifying them requires a read-modify-write sequence.
Because this operation is not atomic, concurrent calls to
dw_edma_v0_core_start() can introduce race conditions if two channels
update these registers simultaneously.
Add a spinlock to serialize access to these registers and prevent race
conditions.
[den: update dw_edma.lock comment] |
| In the Linux kernel, the following vulnerability has been resolved:
tpm: tpm_tis_spi: Use wait_woken() in wait_for_tmp_stat()
wait_event_interruptible_timeout() evaluates its condition after setting
the current task state to TASK_INTERRUPTIBLE.
With CONFIG_DEBUG_ATOMIC_SLEEP this triggers a warning when the IRQ wait
path is used:
tpm_tis_status()
tpm_tis_spi_read_bytes()
tpm_tis_spi_transfer_full()
spi_bus_lock()
mutex_lock()
Address this with the following measures:
1. Call wait_tpm_stat_cond() only while tasking is running.
2. Use wait_woken() to wait for changes. |
| In the Linux kernel, the following vulnerability has been resolved:
irqchip/crossbar: Use correct index in crossbar_domain_free()
crossbar_domain_free() resets the domain data and then uses the nulled
out irq_data->hwirq member as index to reset the irq_map[] entry and to
write the relevant crossbar register with a safe entry. That means it
never frees the correct index and keeps the crossbar register connection
to the source interrupt active.
If it would not reset the domain data, then this would be even worse as
irq_data->hwirq holds the source interrupt number, but both the map and
register index need the corresponding GIC SPI number and not the source
interrupt number. This might even result in an out of bounds access as
the source interrupt number can be higher than the maximal index space.
Fix this by using the GIC SPI index from the parent domain's irq_data. |
| In the Linux kernel, the following vulnerability has been resolved:
fpga: microchip-spi: fix zero header_size OOB read in mpf_ops_parse_header()
mpf_ops_parse_header() reads header_size from the bitstream at
MPF_HEADER_SIZE_OFFSET (24). When header_size is zero, the expression
*(buf + header_size - 1) reads one byte before the buffer start.
Since initial_header_size is set to 71 in mpf_ops, the fpga-mgr core
guarantees the buffer is large enough to reach MPF_HEADER_SIZE_OFFSET.
The only real gap is the zero header_size case, which cannot be
resolved by providing a larger buffer, so return -EINVAL. |
| In the Linux kernel, the following vulnerability has been resolved:
ocfs2: reject non-inline dinodes with i_size and zero i_clusters
On a volume mounted without OCFS2_FEATURE_INCOMPAT_SPARSE_ALLOC, a
non-inline regular file with non-zero i_size and zero i_clusters is
structurally malformed: the extent map declares no allocated clusters yet
the size header claims content exists. Keep rejecting that shape, but
express it through a shared predicate so the same invariant is available
to normal inode reads and online filecheck.
The same zero-cluster shape is also malformed for non-inline directories.
ocfs2 directory growth allocates backing storage before advancing i_size,
and ocfs2_dir_foreach_blk_el() later walks until ctx->pos reaches
i_size_read(inode). A forged directory dinode with a huge i_size and no
clusters would repeatedly fail on holes while advancing through the
claimed size.
Sparse regular files remain exempt: on sparse-alloc volumes, truncate can
legitimately grow i_size without allocating clusters. System inodes and
inline-data dinodes also retain their separate storage rules.
Mirror the check in ocfs2_filecheck_validate_inode_block() as well.
filecheck reports through its own error namespace, so malformed
size/cluster state is logged as a filecheck invalid-inode result rather
than via ocfs2_error(), but it must not proceed into
ocfs2_populate_inode(). |
| In the Linux kernel, the following vulnerability has been resolved:
batman-adv: frag: free unfragmentable packet
The caller of batadv_frag_send_packet() assume that the skb provided to the
function are always consumed. But the pre-check for an empty payload or the
zero fragment size returned an error without any further actions.
A failed pre-check must use the same error handling code as the rest of the
function. |
| In the Linux kernel, the following vulnerability has been resolved:
batman-adv: ensure minimal ethernet header on TX
As documented in commit 8bd67ebb50c0 ("net: bridge: xmit: make sure we have
at least eth header len bytes"), it is possible by for a local user with
eBPF TC hook access to attach a tc filter which truncates the packet and
redirects to an batadv interface. But the code assumes that at least
ETH_HLEN bytes are available and thus might read outside of the available
buffer.
The batadv_interface_tx() must therefore always check itself if enough data
is available for the ethernet header and don't rely on min_header_len. |
| In the Linux kernel, the following vulnerability has been resolved:
batman-adv: bla: reacquire gw address after skb realloc
The pskb_may_pull() called by batadv_bla_is_backbone_gw() could reallocate
the buffer behind the skb. Variables which were pointing to the old buffer
need to be reassigned to avoid an use-after-free. |
| The Templately – Elementor & Gutenberg Template Library: 6500+ Free & Pro Ready Templates And Cloud! plugin for WordPress is vulnerable to Remote Code Execution in all versions up to, and including, 3.7.1 via the fetch_remote_file function. This is due to a filename validation/destination mismatch in fetch_remote_file, where file type validation is performed against the attacker-controlled Content-Disposition filename rather than the URL-path-derived destination filename. This makes it possible for authenticated attackers, with contributor-level access and above, to execute code on the server. A GIF+PHP polyglot file passes wp_check_filetype_and_ext validation as image/gif via the Content-Disposition filename, while the actual destination path is written with a .php extension derived from the URL path, bypassing the unfiltered_upload capability gate entirely. The affected endpoints are reachable at this privilege level because Templately's entire REST API — including the cloud import endpoints used in this attack (/templately/v1/clouds/upload and /templately/v1/insert) — is authorized only by a current_user_can('delete_posts') check, with no administrator or manage_options capability requirement. The same permission gate also allows a contributor to overwrite the site's global Templately cloud connection via the /templately/v1/login endpoint with global_signin set to true. A complete remediation should both correct fetch_remote_file to validate the file type against the actual destination filename rather than the Content-Disposition header (and avoid deriving the write path from the request URL), and restrict state-changing Templately REST routes to an appropriate administrator-level capability. |
| In the Linux kernel, the following vulnerability has been resolved:
dm-integrity: fix a bug if the bio is out of limits
If dm_integrity_check_limits fails, the code would exit with
DM_MAPIO_KILL. However, the range would be already locked at this point,
and it wouldn't be unlocked, resulting in a deadlock. Let's move the
limit check up, so that when it exits, no resources are leaked. |
| In the Linux kernel, the following vulnerability has been resolved:
ocfs2: fix NULL h_transaction deref in ocfs2_assure_trans_credits
[BUG]
A direct write over unwritten extents can panic the kernel in
ocfs2_assure_trans_credits() when the journal aborts during DIO
completion. The crash is a general protection fault from a NULL pointer
dereference.
[CAUSE]
ocfs2_dio_end_io_write() loops over a direct write's unwritten extents,
marking each written under a single journal handle. If the journal
aborts (for example after an I/O error) while the extent tree is being
updated, the handle is left aborted with its transaction pointer
cleared. The extent merge treats that failure as not critical and
reports success, so the loop keeps using the handle.
ocfs2_assure_trans_credits() reads the handle's remaining credits
without first checking whether the handle is aborted, and that read
dereferences the cleared transaction pointer.
[FIX]
A journal abort is recorded in the handle itself, so callers are
expected to test the handle rather than rely on a returned error.
Make ocfs2_assure_trans_credits() do that, as the other ocfs2 journal
helpers already do, and return -EROFS when the handle is aborted. |
| In the Linux kernel, the following vulnerability has been resolved:
net/9p: fix infinite loop in p9_client_rpc on fatal signal
When p9_client_rpc() is called with type P9_TFLUSH and the transport
has no peer (e.g. fd transport backed by pipes with no 9p server),
a fatal signal causes an infinite loop:
again:
err = io_wait_event_killable(req->wq, ...)
/* SIGKILL wakes the task, returns -ERESTARTSYS */
if (err == -ERESTARTSYS && c->status == Connected &&
type == P9_TFLUSH) {
sigpending = 1;
clear_thread_flag(TIF_SIGPENDING);
goto again;
}
clear_thread_flag() clears TIF_SIGPENDING before jumping back to
io_wait_event_killable(). signal_pending_state() checks TIF_SIGPENDING,
finds it zero, and the task goes to sleep again. The task can only wake
on the next signal delivery that calls signal_wake_up() and sets
TIF_SIGPENDING again. When that happens the loop repeats, clears
TIF_SIGPENDING, and sleeps again indefinitely.
This is triggered in practice by coredump_wait(): when a thread in a
multi-threaded process causes a coredump (e.g. via SIGSYS from Syscall
User Dispatch), coredump_wait() sends SIGKILL to all other threads and
waits for them to call mm_release(). If one of those threads is blocked
in p9_client_rpc() over an fd transport with no peer, it enters the
P9_TFLUSH loop and never calls mm_release(), so coredump_wait() stalls
forever:
INFO: task syz.0.18:676 blocked for more than 143 seconds.
Not tainted 6.12.77+ #1
task:syz.0.18 state:D stack:27600 pid:676 tgid:673 ppid:630 flags:0x00000004
Call Trace:
<TASK>
context_switch kernel/sched/core.c:5344 [inline]
__schedule+0xcb4/0x5d50 kernel/sched/core.c:6724
__schedule_loop kernel/sched/core.c:6801 [inline]
schedule+0xe5/0x350 kernel/sched/core.c:6816
schedule_timeout+0x253/0x290 kernel/time/timer.c:2593
do_wait_for_common kernel/sched/completion.c:95 [inline]
__wait_for_common+0x409/0x600 kernel/sched/completion.c:116
wait_for_common kernel/sched/completion.c:127 [inline]
wait_for_completion_state+0x1d/0x40 kernel/sched/completion.c:264
coredump_wait fs/coredump.c:448 [inline]
do_coredump+0x854/0x4350 fs/coredump.c:629
get_signal+0x1425/0x2730 kernel/signal.c:2903
arch_do_signal_or_restart+0x81/0x880 arch/x86/kernel/signal.c:337
exit_to_user_mode_loop kernel/entry/common.c:111 [inline]
exit_to_user_mode_prepare include/linux/entry-common.h:328 [inline]
__syscall_exit_to_user_mode_work kernel/entry/common.c:207 [inline]
syscall_exit_to_user_mode+0xf9/0x160 kernel/entry/common.c:218
do_syscall_64+0x102/0x220 arch/x86/entry/common.c:84
entry_SYSCALL_64_after_hwframe+0x77/0x7f
</TASK>
Fix: check fatal_signal_pending() before clearing TIF_SIGPENDING in the
P9_TFLUSH retry loop. At that point TIF_SIGPENDING is still set, so
fatal_signal_pending() works correctly. If a fatal signal is pending,
jump to recalc_sigpending to restore TIF_SIGPENDING and return
-ERESTARTSYS to the caller.
The same defect is present in stable kernels back to 5.4. On those
kernels the infinite loop is broken earlier by a second SIGKILL from
the parent process (e.g. kill_and_wait() retrying after a timeout),
resulting in a zombie process and a shutdown delay rather than a
permanent D-state hang, but the underlying flaw is the same.
Found by Linux Verification Center (linuxtesting.org) with Syzkaller. |
| In the Linux kernel, the following vulnerability has been resolved:
mtd: slram: remove failed entries from the device list
register_device() links a new slram_mtdlist entry before allocating all
of the state needed by the entry. If a later allocation, memremap(), or
mtd_device_register() fails, the partially initialized entry remains on
the global list. A later cleanup can then dereference or free invalid
state from that failed entry.
Unwind the partially initialized entry and clear the list tail on each
failure path after the entry has been linked. |
| In the Linux kernel, the following vulnerability has been resolved:
fs/proc/task_mmu: fix make_uffd_wp_huge_pte() prot-update race
Patch series "userfaultfd/pagemap: pre-existing fixes".
These are pre-existing bug fixes that were carried at the front of the
userfaultfd RWP working-set-tracking series up to v5 [1]. Per review
feedback that fixes should not sit in the middle of a feature series, they
are split out and sent on their own; the RWP series is reposted rebased on
top of this.
All six were flagged by the Sashiko AI review of the RWP series and carry
independent of RWP, apply to mm-new directly, and carry Cc: stable@.
1: fs/proc/task_mmu: a missing huge_ptep_modify_prot_start() in
make_uffd_wp_huge_pte() can lose hardware Dirty/Accessed updates
when PAGEMAP_SCAN write-protects a hugetlb PTE.
2: fs/proc/task_mmu: pagemap_scan_hugetlb_entry() compares the range
against HPAGE_SIZE rather than the hstate page size, so it never
write-protects gigantic hugetlb pages.
3: fs/proc/task_mmu: PAGEMAP_SCAN with PM_SCAN_WP_MATCHING over an
unpopulated hugetlb range self-deadlocks -- pagemap_scan_pte_hole()
calls uffd_wp_range() while walk_hugetlb_range() holds the hugetlb
vma lock for read, and hugetlb_change_protection() then takes it
for write. Install the marker inline instead.
4: mm/huge_memory: change_non_present_huge_pmd() drops pmd_swp_uffd_wp
on a device-private PMD permission downgrade, silently losing the
uffd-wp marker.
5: userfaultfd: must_wait() applies pte_write() to a locklessly read
PTE without checking pte_present(), so swap/migration entries
decode random offset bits and a thread can stay parked on a stale
fault.
6: userfaultfd: __VMA_UFFD_FLAGS feeds VMA_UFFD_MINOR_BIT (41) to
mk_vma_flags() unconditionally, an out-of-bounds write into the
single-word vma_flags_t on 32-bit. Build the mask from config-gated
per-mode masks so an unavailable bit is never materialised.
This patch (of 6):
make_uffd_wp_huge_pte() arms the UFFD_WP bit on a present HugeTLB PTE by
calling huge_ptep_modify_prot_commit() with a ptent snapshot that was
fetched without the corresponding huge_ptep_modify_prot_start(). The
start helper is what atomically clears the entry so the kernel-owned
snapshot stays consistent until the commit; without it, the hardware may
set Dirty or Accessed in the live PTE between the original read and the
commit, and huge_ptep_modify_prot_commit() (whose generic implementation
just calls set_huge_pte_at()) then writes the stale snapshot back over the
live hardware bits, losing the update.
The non-hugetlb sibling make_uffd_wp_pte() does this correctly via
ptep_modify_prot_start() / ptep_modify_prot_commit(). Mirror that pattern
for the present-PTE branch. The migration case stays as-is -- migration
entries are non-present, so there's no hardware update to race against. |
| In the Linux kernel, the following vulnerability has been resolved:
mm/damon/sysfs-schemes: fix dir put orders in access_pattern_add_dirs()
Patch series "mm/damon/sysfs-schemes: fix wrong directories put orders in
error paths".
Error paths of damon_sysfs_access_pattern_add_dirs() and
damon_sysfs_scheme_add_dirs() functions put references to directories in
wrong orders. As a result, uninitialized memory dereference and/or
memory leak can happen. Fix those.
This patch (of 2):
In access_pattern_add_dirs(), error handling path puts references starting
from setup failed directories. If the failure happpened from the initial
allication in the setup functions, uninitialized memory dereference
happen. The allocation failures will not commonly happen, but the
consequence is quite bad. Fix the wrong reference put orders.
The issue was discovered [1] by Sashiko. |
| In the Linux kernel, the following vulnerability has been resolved:
ntfs: make system files immutable to prevent corruption
When a system file such as $Bitmap is exposed via show_sys_files and
written from userspace, the volume is corrupted and, because the cluster
allocator scans $Bitmap through the same inode's page cache, a write to
$Bitmap also deadlocks writeback against the folio it already holds locked.
These files are maintained by the driver itself and have no valid reason
to be written through the file interface. Mark base metadata files
(mft_no < FILE_first_user) as immutable during inode read so the VFS
rejects write, mmap, truncate and unlink with -EPERM. Directories are
skipped so the root and $Extend remain usable. Internal metadata updates
do not go through the VFS write path and are unaffected. |
