| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
staging: rtl8723bs: properly validate the data in rtw_get_ie_ex()
Just like in commit 154828bf9559 ("staging: rtl8723bs: fix out-of-bounds
read in rtw_get_ie() parser"), we don't trust the data in the frame so
we should check the length better before acting on it |
| In the Linux kernel, the following vulnerability has been resolved:
net: use skb_header_pointer() for TCPv4 GSO frag_off check
Syzbot reported a KMSAN uninit-value warning in gso_features_check()
called from netif_skb_features() [1].
gso_features_check() reads iph->frag_off to decide whether to clear
mangleid_features. Accessing the IPv4 header via ip_hdr()/inner_ip_hdr()
can rely on skb header offsets that are not always safe for direct
dereference on packets injected from PF_PACKET paths.
Use skb_header_pointer() for the TCPv4 frag_off check so the header read
is robust whether data is already linear or needs copying.
[1] https://syzkaller.appspot.com/bug?extid=1543a7d954d9c6d00407 |
| In the Linux kernel, the following vulnerability has been resolved:
net: sched: cls_api: fix tc_chain_fill_node to initialize tcm_info to zero to prevent an info-leak
When building netlink messages, tc_chain_fill_node() never initializes
the tcm_info field of struct tcmsg. Since the allocation is not zeroed,
kernel heap memory is leaked to userspace through this 4-byte field.
The fix simply zeroes tcm_info alongside the other fields that are
already initialized. |
| In the Linux kernel, the following vulnerability has been resolved:
crypto: authencesn - Do not place hiseq at end of dst for out-of-place decryption
When decrypting data that is not in-place (src != dst), there is
no need to save the high-order sequence bits in dst as it could
simply be re-copied from the source.
However, the data to be hashed need to be rearranged accordingly.
Thanks, |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: Fix regsafe() for pointers to packet
In case rold->reg->range == BEYOND_PKT_END && rcur->reg->range == N
regsafe() may return true which may lead to current state with
valid packet range not being explored. Fix the bug. |
| In the Linux kernel, the following vulnerability has been resolved:
mptcp: fix soft lockup in mptcp_recvmsg()
syzbot reported a soft lockup in mptcp_recvmsg() [0].
When receiving data with MSG_PEEK | MSG_WAITALL flags, the skb is not
removed from the sk_receive_queue. This causes sk_wait_data() to always
find available data and never perform actual waiting, leading to a soft
lockup.
Fix this by adding a 'last' parameter to track the last peeked skb.
This allows sk_wait_data() to make informed waiting decisions and prevent
infinite loops when MSG_PEEK is used.
[0]:
watchdog: BUG: soft lockup - CPU#2 stuck for 156s! [server:1963]
Modules linked in:
CPU: 2 UID: 0 PID: 1963 Comm: server Not tainted 6.19.0-rc8 #61 PREEMPT(none)
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.15.0-1 04/01/2014
RIP: 0010:sk_wait_data+0x15/0x190
Code: 80 00 00 00 00 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 f3 0f 1e fa 41 56 41 55 41 54 49 89 f4 55 48 89 d5 53 48 89 fb <48> 83 ec 30 65 48 8b 05 17 a4 6b 01 48 89 44 24 28 31 c0 65 48 8b
RSP: 0018:ffffc90000603ca0 EFLAGS: 00000246
RAX: 0000000000000000 RBX: ffff888102bf0800 RCX: 0000000000000001
RDX: 0000000000000000 RSI: ffffc90000603d18 RDI: ffff888102bf0800
RBP: 0000000000000000 R08: 0000000000000002 R09: 0000000000000101
R10: 0000000000000000 R11: 0000000000000075 R12: ffffc90000603d18
R13: ffff888102bf0800 R14: ffff888102bf0800 R15: 0000000000000000
FS: 00007f6e38b8c4c0(0000) GS:ffff8881b877e000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 000055aa7bff1680 CR3: 0000000105cbe000 CR4: 00000000000006f0
Call Trace:
<TASK>
mptcp_recvmsg+0x547/0x8c0 net/mptcp/protocol.c:2329
inet_recvmsg+0x11f/0x130 net/ipv4/af_inet.c:891
sock_recvmsg+0x94/0xc0 net/socket.c:1100
__sys_recvfrom+0xb2/0x130 net/socket.c:2256
__x64_sys_recvfrom+0x1f/0x30 net/socket.c:2267
do_syscall_64+0x59/0x2d0 arch/x86/entry/syscall_64.c:94
entry_SYSCALL_64_after_hwframe+0x76/0x7e arch/x86/entry/entry_64.S:131
RIP: 0033:0x7f6e386a4a1d
Code: 0f 1f 84 00 00 00 00 00 0f 1f 44 00 00 48 8d 05 f1 de 2c 00 41 89 ca 8b 00 85 c0 75 20 45 31 c9 45 31 c0 b8 2d 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 6b f3 c3 66 0f 1f 84 00 00 00 00 00 41 56 41
RSP: 002b:00007ffc3c4bb078 EFLAGS: 00000246 ORIG_RAX: 000000000000002d
RAX: ffffffffffffffda RBX: 000000000000861e RCX: 00007f6e386a4a1d
RDX: 00000000000003ff RSI: 00007ffc3c4bb150 RDI: 0000000000000004
RBP: 00007ffc3c4bb570 R08: 0000000000000000 R09: 0000000000000000
R10: 0000000000000103 R11: 0000000000000246 R12: 00005605dbc00be0
R13: 00007ffc3c4bb650 R14: 0000000000000000 R15: 0000000000000000
</TASK> |
| In the Linux kernel, the following vulnerability has been resolved:
netfilter: x_tables: ensure names are nul-terminated
Reject names that lack a \0 character before feeding them
to functions that expect c-strings.
Fixes tag is the most recent commit that needs this change. |
| In the Linux kernel, the following vulnerability has been resolved:
usb: dwc2: gadget: Fix spin_lock/unlock mismatch in dwc2_hsotg_udc_stop()
dwc2_gadget_exit_clock_gating() internally calls call_gadget() macro,
which expects hsotg->lock to be held since it does spin_unlock/spin_lock
around the gadget driver callback invocation.
However, dwc2_hsotg_udc_stop() calls dwc2_gadget_exit_clock_gating()
without holding the lock. This leads to:
- spin_unlock on a lock that is not held (undefined behavior)
- The lock remaining held after dwc2_gadget_exit_clock_gating() returns,
causing a deadlock when spin_lock_irqsave() is called later in the
same function.
Fix this by acquiring hsotg->lock before calling
dwc2_gadget_exit_clock_gating() and releasing it afterwards, which
satisfies the locking requirement of the call_gadget() macro. |
| In the Linux kernel, the following vulnerability has been resolved:
iio: light: bh1780: fix PM runtime leak on error path
Move pm_runtime_put_autosuspend() before the error check to ensure
the PM runtime reference count is always decremented after
pm_runtime_get_sync(), regardless of whether the read operation
succeeds or fails. |
| In the Linux kernel, the following vulnerability has been resolved:
iio: imu: adis: Fix NULL pointer dereference in adis_init
The adis_init() function dereferences adis->ops to check if the
individual function pointers (write, read, reset) are NULL, but does
not first check if adis->ops itself is NULL.
Drivers like adis16480, adis16490, adis16545 and others do not set
custom ops and rely on adis_init() assigning the defaults. Since struct
adis is zero-initialized by devm_iio_device_alloc(), adis->ops is NULL
when adis_init() is called, causing a NULL pointer dereference:
Unable to handle kernel NULL pointer dereference at virtual address 0000000000000000
pc : adis_init+0xc0/0x118
Call trace:
adis_init+0xc0/0x118
adis16480_probe+0xe0/0x670
Fix this by checking if adis->ops is NULL before dereferencing it,
falling through to assign the default ops in that case. |
| In the Linux kernel, the following vulnerability has been resolved:
net: macb: Shuffle the tx ring before enabling tx
Quanyang observed that when using an NFS rootfs on an AMD ZynqMp board,
the rootfs may take an extended time to recover after a suspend.
Upon investigation, it was determined that the issue originates from a
problem in the macb driver.
According to the Zynq UltraScale TRM [1], when transmit is disabled,
the transmit buffer queue pointer resets to point to the address
specified by the transmit buffer queue base address register.
In the current implementation, the code merely resets `queue->tx_head`
and `queue->tx_tail` to '0'. This approach presents several issues:
- Packets already queued in the tx ring are silently lost,
leading to memory leaks since the associated skbs cannot be released.
- Concurrent write access to `queue->tx_head` and `queue->tx_tail` may
occur from `macb_tx_poll()` or `macb_start_xmit()` when these values
are reset to '0'.
- The transmission may become stuck on a packet that has already been sent
out, with its 'TX_USED' bit set, but has not yet been processed. However,
due to the manipulation of 'queue->tx_head' and 'queue->tx_tail',
`macb_tx_poll()` incorrectly assumes there are no packets to handle
because `queue->tx_head == queue->tx_tail`. This issue is only resolved
when a new packet is placed at this position. This is the root cause of
the prolonged recovery time observed for the NFS root filesystem.
To resolve this issue, shuffle the tx ring and tx skb array so that
the first unsent packet is positioned at the start of the tx ring.
Additionally, ensure that updates to `queue->tx_head` and
`queue->tx_tail` are properly protected with the appropriate lock.
[1] https://docs.amd.com/v/u/en-US/ug1085-zynq-ultrascale-trm |
| In the Linux kernel, the following vulnerability has been resolved:
mm/damon/core: clear walk_control on inactive context in damos_walk()
damos_walk() sets ctx->walk_control to the caller-provided control
structure before checking whether the context is running. If the context
is inactive (damon_is_running() returns false), the function returns
-EINVAL without clearing ctx->walk_control. This leaves a dangling
pointer to a stack-allocated structure that will be freed when the caller
returns.
This is structurally identical to the bug fixed in commit f9132fbc2e83
("mm/damon/core: remove call_control in inactive contexts") for
damon_call(), which had the same pattern of linking a control object and
returning an error without unlinking it.
The dangling walk_control pointer can cause:
1. Use-after-free if the context is later started and kdamond
dereferences ctx->walk_control (e.g., in damos_walk_cancel()
which writes to control->canceled and calls complete())
2. Permanent -EBUSY from subsequent damos_walk() calls, since the
stale pointer is non-NULL
Nonetheless, the real user impact is quite restrictive. The
use-after-free is impossible because there is no damos_walk() callers who
starts the context later. The permanent -EBUSY can actually confuse
users, as DAMON is not running. But the symptom is kept only while the
context is turned off. Turning it on again will make DAMON internally
uses a newly generated damon_ctx object that doesn't have the invalid
damos_walk_control pointer, so everything will work fine again.
Fix this by clearing ctx->walk_control under walk_control_lock before
returning -EINVAL, mirroring the fix pattern from f9132fbc2e83. |
| In the Linux kernel, the following vulnerability has been resolved:
netfilter: nf_conntrack_helper: pass helper to expect cleanup
nf_conntrack_helper_unregister() calls nf_ct_expect_iterate_destroy()
to remove expectations belonging to the helper being unregistered.
However, it passes NULL instead of the helper pointer as the data
argument, so expect_iter_me() never matches any expectation and all
of them survive the cleanup.
After unregister returns, nfnl_cthelper_del() frees the helper
object immediately. Subsequent expectation dumps or packet-driven
init_conntrack() calls then dereference the freed exp->helper,
causing a use-after-free.
Pass the actual helper pointer so expectations referencing it are
properly destroyed before the helper object is freed.
BUG: KASAN: slab-use-after-free in string+0x38f/0x430
Read of size 1 at addr ffff888003b14d20 by task poc/103
Call Trace:
string+0x38f/0x430
vsnprintf+0x3cc/0x1170
seq_printf+0x17a/0x240
exp_seq_show+0x2e5/0x560
seq_read_iter+0x419/0x1280
proc_reg_read+0x1ac/0x270
vfs_read+0x179/0x930
ksys_read+0xef/0x1c0
Freed by task 103:
The buggy address is located 32 bytes inside of
freed 192-byte region [ffff888003b14d00, ffff888003b14dc0) |
| A maliciously crafted MODEL file, when parsed through certain Autodesk products, can force an Out-of-Bounds Write vulnerability. A malicious actor may leverage this vulnerability to cause a crash, cause data corruption, or execute arbitrary code in the context of the current process. |
| A maliciously crafted CATPART file, when parsed through certain Autodesk products, can force an Out-of-Bounds Write vulnerability. A malicious actor may leverage this vulnerability to cause a crash, cause data corruption, or execute arbitrary code in the context of the current process. |
| In the Linux kernel, the following vulnerability has been resolved:
usb: misc: usbio: Fix URB memory leak on submit failure
When usb_submit_urb() fails in usbio_probe(), the previously allocated
URB is never freed, causing a memory leak.
Fix this by jumping to err_free_urb label to properly release the URB
on the error path. |
| A maliciously crafted SLDPRT file, when parsed through certain Autodesk products, can force an Out-of-Bounds Read vulnerability. A malicious actor can leverage this vulnerability to cause a crash, read sensitive data, or execute arbitrary code in the context of the current process. |
| A maliciously crafted SLDPRT file, when parsed through certain Autodesk products, can force an Out-of-Bounds Read vulnerability. A malicious actor can leverage this vulnerability to cause a crash, read sensitive data, or execute arbitrary code in the context of the current process. |
| A maliciously crafted PRT file, when parsed through certain Autodesk products, can force a Memory Corruption vulnerability. A malicious actor can leverage this vulnerability to execute arbitrary code in the context of the current process. |
| A maliciously crafted PRT file, when parsed through certain Autodesk products, can force a Memory corruption vulnerability. A malicious actor can leverage this vulnerability to execute arbitrary code in the context of the current process. |
