| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
serial: core: fix infinite loop in handle_tx() for PORT_UNKNOWN
uart_write_room() and uart_write() behave inconsistently when
xmit_buf is NULL (which happens for PORT_UNKNOWN ports that were
never properly initialized):
- uart_write_room() returns kfifo_avail() which can be > 0
- uart_write() checks xmit_buf and returns 0 if NULL
This inconsistency causes an infinite loop in drivers that rely on
tty_write_room() to determine if they can write:
while (tty_write_room(tty) > 0) {
written = tty->ops->write(...);
// written is always 0, loop never exits
}
For example, caif_serial's handle_tx() enters an infinite loop when
used with PORT_UNKNOWN serial ports, causing system hangs.
Fix by making uart_write_room() also check xmit_buf and return 0 if
it's NULL, consistent with uart_write().
Reproducer: https://gist.github.com/mrpre/d9a694cc0e19828ee3bc3b37983fde13 |
| In the Linux kernel, the following vulnerability has been resolved:
drm/imagination: Fix deadlock in soft reset sequence
The soft reset sequence is currently executed from the threaded IRQ
handler, hence it cannot call disable_irq() which internally waits
for IRQ handlers, i.e. itself, to complete.
Use disable_irq_nosync() during a soft reset instead. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/imagination: Synchronize interrupts before suspending the GPU
The runtime PM suspend callback doesn't know whether the IRQ handler is
in progress on a different CPU core and doesn't wait for it to finish.
Depending on timing, the IRQ handler could be running while the GPU is
suspended, leading to kernel crashes when trying to access GPU
registers. See example signature below.
In a power off sequence initiated by the runtime PM suspend callback,
wait for any IRQ handlers in progress on other CPU cores to finish, by
calling synchronize_irq().
At the same time, remove the runtime PM resume/put calls in the threaded
IRQ handler. On top of not being the right approach to begin with, and
being at the wrong place as they should have wrapped all GPU register
accesses, the driver would hit a deadlock between synchronize_irq()
being called from a runtime PM suspend callback, holding the device
power lock, and the resume callback requiring the same.
Example crash signature on a TI AM68 SK platform:
[ 337.241218] SError Interrupt on CPU0, code 0x00000000bf000000 -- SError
[ 337.241239] CPU: 0 UID: 0 PID: 112 Comm: irq/234-gpu Tainted: G M 6.17.7-B2C-00005-g9c7bbe4ea16c #2 PREEMPT
[ 337.241246] Tainted: [M]=MACHINE_CHECK
[ 337.241249] Hardware name: Texas Instruments AM68 SK (DT)
[ 337.241252] pstate: 60000005 (nZCv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--)
[ 337.241256] pc : pvr_riscv_irq_pending+0xc/0x24
[ 337.241277] lr : pvr_device_irq_thread_handler+0x64/0x310
[ 337.241282] sp : ffff800085b0bd30
[ 337.241284] x29: ffff800085b0bd50 x28: ffff0008070d9eab x27: ffff800083a5ce10
[ 337.241291] x26: ffff000806e48f80 x25: ffff0008070d9eac x24: 0000000000000000
[ 337.241296] x23: ffff0008068e9bf0 x22: ffff0008068e9bd0 x21: ffff800085b0bd30
[ 337.241301] x20: ffff0008070d9e00 x19: ffff0008068e9000 x18: 0000000000000001
[ 337.241305] x17: 637365645f656c70 x16: 0000000000000000 x15: ffff000b7df9ff40
[ 337.241310] x14: 0000a585fe3c0d0e x13: 000000999704f060 x12: 000000000002771a
[ 337.241314] x11: 00000000000000c0 x10: 0000000000000af0 x9 : ffff800085b0bd00
[ 337.241318] x8 : ffff0008071175d0 x7 : 000000000000b955 x6 : 0000000000000003
[ 337.241323] x5 : 0000000000000000 x4 : 0000000000000002 x3 : 0000000000000000
[ 337.241327] x2 : ffff800080e39d20 x1 : ffff800080e3fc48 x0 : 0000000000000000
[ 337.241333] Kernel panic - not syncing: Asynchronous SError Interrupt
[ 337.241337] CPU: 0 UID: 0 PID: 112 Comm: irq/234-gpu Tainted: G M 6.17.7-B2C-00005-g9c7bbe4ea16c #2 PREEMPT
[ 337.241342] Tainted: [M]=MACHINE_CHECK
[ 337.241343] Hardware name: Texas Instruments AM68 SK (DT)
[ 337.241345] Call trace:
[ 337.241348] show_stack+0x18/0x24 (C)
[ 337.241357] dump_stack_lvl+0x60/0x80
[ 337.241364] dump_stack+0x18/0x24
[ 337.241368] vpanic+0x124/0x2ec
[ 337.241373] abort+0x0/0x4
[ 337.241377] add_taint+0x0/0xbc
[ 337.241384] arm64_serror_panic+0x70/0x80
[ 337.241389] do_serror+0x3c/0x74
[ 337.241392] el1h_64_error_handler+0x30/0x48
[ 337.241400] el1h_64_error+0x6c/0x70
[ 337.241404] pvr_riscv_irq_pending+0xc/0x24 (P)
[ 337.241410] irq_thread_fn+0x2c/0xb0
[ 337.241416] irq_thread+0x170/0x334
[ 337.241421] kthread+0x12c/0x210
[ 337.241428] ret_from_fork+0x10/0x20
[ 337.241434] SMP: stopping secondary CPUs
[ 337.241451] Kernel Offset: disabled
[ 337.241453] CPU features: 0x040000,02002800,20002001,0400421b
[ 337.241456] Memory Limit: none
[ 337.457921] ---[ end Kernel panic - not syncing: Asynchronous SError Interrupt ]--- |
| In the Linux kernel, the following vulnerability has been resolved:
drm/i915/dmc: Fix an unlikely NULL pointer deference at probe
intel_dmc_update_dc6_allowed_count() oopses when DMC hasn't been
initialized, and dmc is thus NULL.
That would be the case when the call path is
intel_power_domains_init_hw() -> {skl,bxt,icl}_display_core_init() ->
gen9_set_dc_state() -> intel_dmc_update_dc6_allowed_count(), as
intel_power_domains_init_hw() is called *before* intel_dmc_init().
However, gen9_set_dc_state() calls intel_dmc_update_dc6_allowed_count()
conditionally, depending on the current and target DC states. At probe,
the target is disabled, but if DC6 is enabled, the function is called,
and an oops follows. Apparently it's quite unlikely that DC6 is enabled
at probe, as we haven't seen this failure mode before.
It is also strange to have DC6 enabled at boot, since that would require
the DMC firmware (loaded by BIOS); the BIOS loading the DMC firmware and
the driver stopping / reprogramming the firmware is a poorly specified
sequence and as such unlikely an intentional BIOS behaviour. It's more
likely that BIOS is leaving an unintentionally enabled DC6 HW state
behind (without actually loading the required DMC firmware for this).
The tracking of the DC6 allowed counter only works if starting /
stopping the counter depends on the _SW_ DC6 state vs. the current _HW_
DC6 state (since stopping the counter requires the DC5 counter captured
when the counter was started). Thus, using the HW DC6 state is incorrect
and it also leads to the above oops. Fix both issues by using the SW DC6
state for the tracking.
This is v2 of the fix originally sent by Jani, updated based on the
first Link: discussion below.
(cherry picked from commit 2344b93af8eb5da5d496b4e0529d35f0f559eaf0) |
| In the Linux kernel, the following vulnerability has been resolved:
perf/core: Fix invalid wait context in ctx_sched_in()
Lockdep found a bug in the event scheduling when a pinned event was
failed and wakes up the threads in the ring buffer like below.
It seems it should not grab a wait-queue lock under perf-context lock.
Let's do it with irq_work.
[ 39.913691] =============================
[ 39.914157] [ BUG: Invalid wait context ]
[ 39.914623] 6.15.0-next-20250530-next-2025053 #1 Not tainted
[ 39.915271] -----------------------------
[ 39.915731] repro/837 is trying to lock:
[ 39.916191] ffff88801acfabd8 (&event->waitq){....}-{3:3}, at: __wake_up+0x26/0x60
[ 39.917182] other info that might help us debug this:
[ 39.917761] context-{5:5}
[ 39.918079] 4 locks held by repro/837:
[ 39.918530] #0: ffffffff8725cd00 (rcu_read_lock){....}-{1:3}, at: __perf_event_task_sched_in+0xd1/0xbc0
[ 39.919612] #1: ffff88806ca3c6f8 (&cpuctx_lock){....}-{2:2}, at: __perf_event_task_sched_in+0x1a7/0xbc0
[ 39.920748] #2: ffff88800d91fc18 (&ctx->lock){....}-{2:2}, at: __perf_event_task_sched_in+0x1f9/0xbc0
[ 39.921819] #3: ffffffff8725cd00 (rcu_read_lock){....}-{1:3}, at: perf_event_wakeup+0x6c/0x470 |
| In the Linux kernel, the following vulnerability has been resolved:
bpf/bonding: reject vlan+srcmac xmit_hash_policy change when XDP is loaded
bond_option_mode_set() already rejects mode changes that would make a
loaded XDP program incompatible via bond_xdp_check(). However,
bond_option_xmit_hash_policy_set() has no such guard.
For 802.3ad and balance-xor modes, bond_xdp_check() returns false when
xmit_hash_policy is vlan+srcmac, because the 802.1q payload is usually
absent due to hardware offload. This means a user can:
1. Attach a native XDP program to a bond in 802.3ad/balance-xor mode
with a compatible xmit_hash_policy (e.g. layer2+3).
2. Change xmit_hash_policy to vlan+srcmac while XDP remains loaded.
This leaves bond->xdp_prog set but bond_xdp_check() now returning false
for the same device. When the bond is later destroyed, dev_xdp_uninstall()
calls bond_xdp_set(dev, NULL, NULL) to remove the program, which hits
the bond_xdp_check() guard and returns -EOPNOTSUPP, triggering:
WARN_ON(dev_xdp_install(dev, mode, bpf_op, NULL, 0, NULL))
Fix this by rejecting xmit_hash_policy changes to vlan+srcmac when an
XDP program is loaded on a bond in 802.3ad or balance-xor mode.
commit 39a0876d595b ("net, bonding: Disallow vlan+srcmac with XDP")
introduced bond_xdp_check() which returns false for 802.3ad/balance-xor
modes when xmit_hash_policy is vlan+srcmac. The check was wired into
bond_xdp_set() to reject XDP attachment with an incompatible policy, but
the symmetric path -- preventing xmit_hash_policy from being changed to an
incompatible value after XDP is already loaded -- was left unguarded in
bond_option_xmit_hash_policy_set().
Note:
commit 094ee6017ea0 ("bonding: check xdp prog when set bond mode")
later added a similar guard to bond_option_mode_set(), but
bond_option_xmit_hash_policy_set() remained unprotected. |
| In the Linux kernel, the following vulnerability has been resolved:
tracing: Add NULL pointer check to trigger_data_free()
If trigger_data_alloc() fails and returns NULL, event_hist_trigger_parse()
jumps to the out_free error path. While kfree() safely handles a NULL
pointer, trigger_data_free() does not. This causes a NULL pointer
dereference in trigger_data_free() when evaluating
data->cmd_ops->set_filter.
Fix the problem by adding a NULL pointer check to trigger_data_free().
The problem was found by an experimental code review agent based on
gemini-3.1-pro while reviewing backports into v6.18.y. |
| In the Linux kernel, the following vulnerability has been resolved:
pinctrl: equilibrium: fix warning trace on load
The callback functions 'eqbr_irq_mask()' and 'eqbr_irq_ack()' are also
called in the callback function 'eqbr_irq_mask_ack()'. This is done to
avoid source code duplication. The problem, is that in the function
'eqbr_irq_mask()' also calles the gpiolib function 'gpiochip_disable_irq()'
This generates the following warning trace in the log for every gpio on
load.
[ 6.088111] ------------[ cut here ]------------
[ 6.092440] WARNING: CPU: 3 PID: 1 at drivers/gpio/gpiolib.c:3810 gpiochip_disable_irq+0x39/0x50
[ 6.097847] Modules linked in:
[ 6.097847] CPU: 3 UID: 0 PID: 1 Comm: swapper/0 Tainted: G W 6.12.59+ #0
[ 6.097847] Tainted: [W]=WARN
[ 6.097847] RIP: 0010:gpiochip_disable_irq+0x39/0x50
[ 6.097847] Code: 39 c6 48 19 c0 21 c6 48 c1 e6 05 48 03 b2 38 03 00 00 48 81 fe 00 f0 ff ff 77 11 48 8b 46 08 f6 c4 02 74 06 f0 80 66 09 fb c3 <0f> 0b 90 0f 1f 40 00 c3 66 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 40
[ 6.097847] RSP: 0000:ffffc9000000b830 EFLAGS: 00010046
[ 6.097847] RAX: 0000000000000045 RBX: ffff888001be02a0 RCX: 0000000000000008
[ 6.097847] RDX: ffff888001be9000 RSI: ffff888001b2dd00 RDI: ffff888001be02a0
[ 6.097847] RBP: ffffc9000000b860 R08: 0000000000000000 R09: 0000000000000000
[ 6.097847] R10: 0000000000000001 R11: ffff888001b2a154 R12: ffff888001be0514
[ 6.097847] R13: ffff888001be02a0 R14: 0000000000000008 R15: 0000000000000000
[ 6.097847] FS: 0000000000000000(0000) GS:ffff888041d80000(0000) knlGS:0000000000000000
[ 6.097847] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 6.097847] CR2: 0000000000000000 CR3: 0000000003030000 CR4: 00000000001026b0
[ 6.097847] Call Trace:
[ 6.097847] <TASK>
[ 6.097847] ? eqbr_irq_mask+0x63/0x70
[ 6.097847] ? no_action+0x10/0x10
[ 6.097847] eqbr_irq_mask_ack+0x11/0x60
In an other driver (drivers/pinctrl/starfive/pinctrl-starfive-jh7100.c) the
interrupt is not disabled here.
To fix this, do not call the 'eqbr_irq_mask()' and 'eqbr_irq_ack()'
function. Implement instead this directly without disabling the interrupts. |
| In the Linux kernel, the following vulnerability has been resolved:
scsi: pm8001: Fix use-after-free in pm8001_queue_command()
Commit e29c47fe8946 ("scsi: pm8001: Simplify pm8001_task_exec()") refactors
pm8001_queue_command(), however it introduces a potential cause of a double
free scenario when it changes the function to return -ENODEV in case of phy
down/device gone state.
In this path, pm8001_queue_command() updates task status and calls
task_done to indicate to upper layer that the task has been handled.
However, this also frees the underlying SAS task. A -ENODEV is then
returned to the caller. When libsas sas_ata_qc_issue() receives this error
value, it assumes the task wasn't handled/queued by LLDD and proceeds to
clean up and free the task again, resulting in a double free.
Since pm8001_queue_command() handles the SAS task in this case, it should
return 0 to the caller indicating that the task has been handled. |
| In the Linux kernel, the following vulnerability has been resolved:
accel/rocket: fix unwinding in error path in rocket_probe
When rocket_core_init() fails (as could be the case with EPROBE_DEFER),
we need to properly unwind by decrementing the counter we just
incremented and if this is the first core we failed to probe, remove the
rocket DRM device with rocket_device_fini() as well. This matches the
logic in rocket_remove(). Failing to properly unwind results in
out-of-bounds accesses. |
| In the Linux kernel, the following vulnerability has been resolved:
ASoC: SDCA: Add allocation failure check for Entity name
Currently find_sdca_entity_iot() can allocate a string for the
Entity name but it doesn't check if that allocation succeeded.
Add the missing NULL check after the allocation. |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: purge error queues in socket destructors
When TX timestamping is enabled via SO_TIMESTAMPING, SKBs may be queued
into sk_error_queue and will stay there until consumed. If userspace never
gets to read the timestamps, or if the controller is removed unexpectedly,
these SKBs will leak.
Fix by adding skb_queue_purge() calls for sk_error_queue in affected
bluetooth destructors. RFCOMM does not currently use sk_error_queue. |
| In the Linux kernel, the following vulnerability has been resolved:
nfsd: Fix cred ref leak in nfsd_nl_threads_set_doit().
syzbot reported memory leak of struct cred. [0]
nfsd_nl_threads_set_doit() passes get_current_cred() to
nfsd_svc(), but put_cred() is not called after that.
The cred is finally passed down to _svc_xprt_create(),
which calls get_cred() with the cred for struct svc_xprt.
The ownership of the refcount by get_current_cred() is not
transferred to anywhere and is just leaked.
nfsd_svc() is also called from write_threads(), but it does
not bump file->f_cred there.
nfsd_nl_threads_set_doit() is called from sendmsg() and
current->cred does not go away.
Let's use current_cred() in nfsd_nl_threads_set_doit().
[0]:
BUG: memory leak
unreferenced object 0xffff888108b89480 (size 184):
comm "syz-executor", pid 5994, jiffies 4294943386
hex dump (first 32 bytes):
01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
backtrace (crc 369454a7):
kmemleak_alloc_recursive include/linux/kmemleak.h:44 [inline]
slab_post_alloc_hook mm/slub.c:4958 [inline]
slab_alloc_node mm/slub.c:5263 [inline]
kmem_cache_alloc_noprof+0x412/0x580 mm/slub.c:5270
prepare_creds+0x22/0x600 kernel/cred.c:185
copy_creds+0x44/0x290 kernel/cred.c:286
copy_process+0x7a7/0x2870 kernel/fork.c:2086
kernel_clone+0xac/0x6e0 kernel/fork.c:2651
__do_sys_clone+0x7f/0xb0 kernel/fork.c:2792
do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline]
do_syscall_64+0xa4/0xf80 arch/x86/entry/syscall_64.c:94
entry_SYSCALL_64_after_hwframe+0x77/0x7f |
| In the Linux kernel, the following vulnerability has been resolved:
accel/amdxdna: Fix dead lock for suspend and resume
When an application issues a query IOCTL while auto suspend is running,
a deadlock can occur. The query path holds dev_lock and then calls
pm_runtime_resume_and_get(), which waits for the ongoing suspend to
complete. Meanwhile, the suspend callback attempts to acquire dev_lock
and blocks, resulting in a deadlock.
Fix this by releasing dev_lock before calling pm_runtime_resume_and_get()
and reacquiring it after the call completes. Also acquire dev_lock in the
resume callback to keep the locking consistent. |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: Fix race in devmap on PREEMPT_RT
On PREEMPT_RT kernels, the per-CPU xdp_dev_bulk_queue (bq) can be
accessed concurrently by multiple preemptible tasks on the same CPU.
The original code assumes bq_enqueue() and __dev_flush() run atomically
with respect to each other on the same CPU, relying on
local_bh_disable() to prevent preemption. However, on PREEMPT_RT,
local_bh_disable() only calls migrate_disable() (when
PREEMPT_RT_NEEDS_BH_LOCK is not set) and does not disable
preemption, which allows CFS scheduling to preempt a task during
bq_xmit_all(), enabling another task on the same CPU to enter
bq_enqueue() and operate on the same per-CPU bq concurrently.
This leads to several races:
1. Double-free / use-after-free on bq->q[]: bq_xmit_all() snapshots
cnt = bq->count, then iterates bq->q[0..cnt-1] to transmit frames.
If preempted after the snapshot, a second task can call bq_enqueue()
-> bq_xmit_all() on the same bq, transmitting (and freeing) the
same frames. When the first task resumes, it operates on stale
pointers in bq->q[], causing use-after-free.
2. bq->count and bq->q[] corruption: concurrent bq_enqueue() modifying
bq->count and bq->q[] while bq_xmit_all() is reading them.
3. dev_rx/xdp_prog teardown race: __dev_flush() clears bq->dev_rx and
bq->xdp_prog after bq_xmit_all(). If preempted between
bq_xmit_all() return and bq->dev_rx = NULL, a preempting
bq_enqueue() sees dev_rx still set (non-NULL), skips adding bq to
the flush_list, and enqueues a frame. When __dev_flush() resumes,
it clears dev_rx and removes bq from the flush_list, orphaning the
newly enqueued frame.
4. __list_del_clearprev() on flush_node: similar to the cpumap race,
both tasks can call __list_del_clearprev() on the same flush_node,
the second dereferences the prev pointer already set to NULL.
The race between task A (__dev_flush -> bq_xmit_all) and task B
(bq_enqueue -> bq_xmit_all) on the same CPU:
Task A (xdp_do_flush) Task B (ndo_xdp_xmit redirect)
---------------------- --------------------------------
__dev_flush(flush_list)
bq_xmit_all(bq)
cnt = bq->count /* e.g. 16 */
/* start iterating bq->q[] */
<-- CFS preempts Task A -->
bq_enqueue(dev, xdpf)
bq->count == DEV_MAP_BULK_SIZE
bq_xmit_all(bq, 0)
cnt = bq->count /* same 16! */
ndo_xdp_xmit(bq->q[])
/* frames freed by driver */
bq->count = 0
<-- Task A resumes -->
ndo_xdp_xmit(bq->q[])
/* use-after-free: frames already freed! */
Fix this by adding a local_lock_t to xdp_dev_bulk_queue and acquiring
it in bq_enqueue() and __dev_flush(). These paths already run under
local_bh_disable(), so use local_lock_nested_bh() which on non-RT is
a pure annotation with no overhead, and on PREEMPT_RT provides a
per-CPU sleeping lock that serializes access to the bq. |
| In the Linux kernel, the following vulnerability has been resolved:
scsi: target: Fix recursive locking in __configfs_open_file()
In flush_write_buffer, &p->frag_sem is acquired and then the loaded store
function is called, which, here, is target_core_item_dbroot_store(). This
function called filp_open(), following which these functions were called
(in reverse order), according to the call trace:
down_read
__configfs_open_file
do_dentry_open
vfs_open
do_open
path_openat
do_filp_open
file_open_name
filp_open
target_core_item_dbroot_store
flush_write_buffer
configfs_write_iter
target_core_item_dbroot_store() tries to validate the new file path by
trying to open the file path provided to it; however, in this case, the bug
report shows:
db_root: not a directory: /sys/kernel/config/target/dbroot
indicating that the same configfs file was tried to be opened, on which it
is currently working on. Thus, it is trying to acquire frag_sem semaphore
of the same file of which it already holds the semaphore obtained in
flush_write_buffer(), leading to acquiring the semaphore in a nested manner
and a possibility of recursive locking.
Fix this by modifying target_core_item_dbroot_store() to use kern_path()
instead of filp_open() to avoid opening the file using filesystem-specific
function __configfs_open_file(), and further modifying it to make this fix
compatible. |
| In the Linux kernel, the following vulnerability has been resolved:
accel/amdxdna: Fix out-of-bounds memset in command slot handling
The remaining space in a command slot may be smaller than the size of
the command header. Clearing the command header with memset() before
verifying the available slot space can result in an out-of-bounds write
and memory corruption.
Fix this by moving the memset() call after the size validation. |
| In the Linux kernel, the following vulnerability has been resolved:
irqchip/sifive-plic: Fix frozen interrupt due to affinity setting
PLIC ignores interrupt completion message for disabled interrupt, explained
by the specification:
The PLIC signals it has completed executing an interrupt handler by
writing the interrupt ID it received from the claim to the
claim/complete register. The PLIC does not check whether the completion
ID is the same as the last claim ID for that target. If the completion
ID does not match an interrupt source that is currently enabled for
the target, the completion is silently ignored.
This caused problems in the past, because an interrupt can be disabled
while still being handled and plic_irq_eoi() had no effect. That was fixed
by checking if the interrupt is disabled, and if so enable it, before
sending the completion message. That check is done with irqd_irq_disabled().
However, that is not sufficient because the enable bit for the handling
hart can be zero despite irqd_irq_disabled(d) being false. This can happen
when affinity setting is changed while a hart is still handling the
interrupt.
This problem is easily reproducible by dumping a large file to uart (which
generates lots of interrupts) and at the same time keep changing the uart
interrupt's affinity setting. The uart port becomes frozen almost
instantaneously.
Fix this by checking PLIC's enable bit instead of irqd_irq_disabled(). |
| In the Linux kernel, the following vulnerability has been resolved:
netfilter: nf_tables: always walk all pending catchall elements
During transaction processing we might have more than one catchall element:
1 live catchall element and 1 pending element that is coming as part of the
new batch.
If the map holding the catchall elements is also going away, its
required to toggle all catchall elements and not just the first viable
candidate.
Otherwise, we get:
WARNING: ./include/net/netfilter/nf_tables.h:1281 at nft_data_release+0xb7/0xe0 [nf_tables], CPU#2: nft/1404
RIP: 0010:nft_data_release+0xb7/0xe0 [nf_tables]
[..]
__nft_set_elem_destroy+0x106/0x380 [nf_tables]
nf_tables_abort_release+0x348/0x8d0 [nf_tables]
nf_tables_abort+0xcf2/0x3ac0 [nf_tables]
nfnetlink_rcv_batch+0x9c9/0x20e0 [..] |
| In the Linux kernel, the following vulnerability has been resolved:
net: add xmit recursion limit to tunnel xmit functions
Tunnel xmit functions (iptunnel_xmit, ip6tunnel_xmit) lack their own
recursion limit. When a bond device in broadcast mode has GRE tap
interfaces as slaves, and those GRE tunnels route back through the
bond, multicast/broadcast traffic triggers infinite recursion between
bond_xmit_broadcast() and ip_tunnel_xmit()/ip6_tnl_xmit(), causing
kernel stack overflow.
The existing XMIT_RECURSION_LIMIT (8) in the no-qdisc path is not
sufficient because tunnel recursion involves route lookups and full IP
output, consuming much more stack per level. Use a lower limit of 4
(IP_TUNNEL_RECURSION_LIMIT) to prevent overflow.
Add recursion detection using dev_xmit_recursion helpers directly in
iptunnel_xmit() and ip6tunnel_xmit() to cover all IPv4/IPv6 tunnel
paths including UDP encapsulated tunnels (VXLAN, Geneve, etc.).
Move dev_xmit_recursion helpers from net/core/dev.h to public header
include/linux/netdevice.h so they can be used by tunnel code.
BUG: KASAN: stack-out-of-bounds in blake2s.constprop.0+0xe7/0x160
Write of size 32 at addr ffff88810033fed0 by task kworker/0:1/11
Workqueue: mld mld_ifc_work
Call Trace:
<TASK>
__build_flow_key.constprop.0 (net/ipv4/route.c:515)
ip_rt_update_pmtu (net/ipv4/route.c:1073)
iptunnel_xmit (net/ipv4/ip_tunnel_core.c:84)
ip_tunnel_xmit (net/ipv4/ip_tunnel.c:847)
gre_tap_xmit (net/ipv4/ip_gre.c:779)
dev_hard_start_xmit (net/core/dev.c:3887)
sch_direct_xmit (net/sched/sch_generic.c:347)
__dev_queue_xmit (net/core/dev.c:4802)
bond_dev_queue_xmit (drivers/net/bonding/bond_main.c:312)
bond_xmit_broadcast (drivers/net/bonding/bond_main.c:5279)
bond_start_xmit (drivers/net/bonding/bond_main.c:5530)
dev_hard_start_xmit (net/core/dev.c:3887)
__dev_queue_xmit (net/core/dev.c:4841)
ip_finish_output2 (net/ipv4/ip_output.c:237)
ip_output (net/ipv4/ip_output.c:438)
iptunnel_xmit (net/ipv4/ip_tunnel_core.c:86)
gre_tap_xmit (net/ipv4/ip_gre.c:779)
dev_hard_start_xmit (net/core/dev.c:3887)
sch_direct_xmit (net/sched/sch_generic.c:347)
__dev_queue_xmit (net/core/dev.c:4802)
bond_dev_queue_xmit (drivers/net/bonding/bond_main.c:312)
bond_xmit_broadcast (drivers/net/bonding/bond_main.c:5279)
bond_start_xmit (drivers/net/bonding/bond_main.c:5530)
dev_hard_start_xmit (net/core/dev.c:3887)
__dev_queue_xmit (net/core/dev.c:4841)
ip_finish_output2 (net/ipv4/ip_output.c:237)
ip_output (net/ipv4/ip_output.c:438)
iptunnel_xmit (net/ipv4/ip_tunnel_core.c:86)
ip_tunnel_xmit (net/ipv4/ip_tunnel.c:847)
gre_tap_xmit (net/ipv4/ip_gre.c:779)
dev_hard_start_xmit (net/core/dev.c:3887)
sch_direct_xmit (net/sched/sch_generic.c:347)
__dev_queue_xmit (net/core/dev.c:4802)
bond_dev_queue_xmit (drivers/net/bonding/bond_main.c:312)
bond_xmit_broadcast (drivers/net/bonding/bond_main.c:5279)
bond_start_xmit (drivers/net/bonding/bond_main.c:5530)
dev_hard_start_xmit (net/core/dev.c:3887)
__dev_queue_xmit (net/core/dev.c:4841)
mld_sendpack
mld_ifc_work
process_one_work
worker_thread
</TASK> |
