| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
ice: fix double free in ice_sf_eth_activate() error path
When auxiliary_device_add() fails, ice_sf_eth_activate() jumps to
aux_dev_uninit and calls auxiliary_device_uninit(&sf_dev->adev).
The device release callback ice_sf_dev_release() frees sf_dev, but
the current error path falls through to sf_dev_free and calls
kfree(sf_dev) again, causing a double free.
Keep kfree(sf_dev) for the auxiliary_device_init() failure path, but
avoid falling through to sf_dev_free after auxiliary_device_uninit(). |
| In the Linux kernel, the following vulnerability has been resolved:
hfsplus: fix uninit-value by validating catalog record size
Syzbot reported a KMSAN uninit-value issue in hfsplus_strcasecmp(). The
root cause is that hfs_brec_read() doesn't validate that the on-disk
record size matches the expected size for the record type being read.
When mounting a corrupted filesystem, hfs_brec_read() may read less data
than expected. For example, when reading a catalog thread record, the
debug output showed:
HFSPLUS_BREC_READ: rec_len=520, fd->entrylength=26
HFSPLUS_BREC_READ: WARNING - entrylength (26) < rec_len (520) - PARTIAL READ!
hfs_brec_read() only validates that entrylength is not greater than the
buffer size, but doesn't check if it's less than expected. It successfully
reads 26 bytes into a 520-byte structure and returns success, leaving 494
bytes uninitialized.
This uninitialized data in tmp.thread.nodeName then gets copied by
hfsplus_cat_build_key_uni() and used by hfsplus_strcasecmp(), triggering
the KMSAN warning when the uninitialized bytes are used as array indices
in case_fold().
Fix by introducing hfsplus_brec_read_cat() wrapper that:
1. Calls hfs_brec_read() to read the data
2. Validates the record size based on the type field:
- Fixed size for folder and file records
- Variable size for thread records (depends on string length)
3. Returns -EIO if size doesn't match expected
For thread records, check against HFSPLUS_MIN_THREAD_SZ before reading
nodeName.length to avoid reading uninitialized data at call sites that
don't zero-initialize the entry structure.
Also initialize the tmp variable in hfsplus_find_cat() as defensive
programming to ensure no uninitialized data even if validation is
bypassed. |
| In the Linux kernel, the following vulnerability has been resolved:
ipv6: xfrm6: release dst on error in xfrm6_rcv_encap()
xfrm6_rcv_encap() performs an IPv6 route lookup when the skb does not
already have a dst attached. ip6_route_input_lookup() returns a
referenced dst entry even when the lookup resolves to an error route.
If dst->error is set, xfrm6_rcv_encap() drops the skb without attaching
the dst to the skb and without releasing the reference returned by the
lookup. Repeated packets hitting this path therefore leak dst entries.
Release the dst before jumping to the drop path. |
| In the Linux kernel, the following vulnerability has been resolved:
f2fs: fix fsck inconsistency caused by FGGC of node block
During FGGC node block migration, fsck may incorrectly treat the
migrated node block as fsync-written data.
The reproduction scenario:
root@vm:/mnt/f2fs# seq 1 2048 | xargs -n 1 ./test_sync // write inline inode and sync
root@vm:/mnt/f2fs# rm -f 1
root@vm:/mnt/f2fs# sync
root@vm:/mnt/f2fs# f2fs_io gc_range // move data block in sync mode and not write CP
SPO, "fsck --dry-run" find inode has already checkpointed but still
with DENT_BIT_SHIFT set
The root cause is that GC does not clear the dentry mark and fsync mark
during node block migration, leading fsck to misinterpret them as
user-issued fsync writes.
In BGGC mode, node block migration is handled by f2fs_sync_node_pages(),
which guarantees the dentry and fsync marks are cleared before writing.
This patch move the set/clear of the fsync|dentry marks into
__write_node_folio to make the logic clearer, and ensures the
fsync|dentry mark is cleared in FGGC. |
| In the Linux kernel, the following vulnerability has been resolved:
RDMA/mlx5: Fix error path fall-through in mlx5_ib_dev_res_srq_init()
mlx5_ib_dev_res_srq_init() allocates two SRQs, s0 and s1. When
ib_create_srq() fails for s1, the error branch destroys s0 but falls
through and unconditionally assigns the freed s0 and the ERR_PTR s1 to
devr->s0 and devr->s1.
This leads to several problems: the lock-free fast path checks
"if (devr->s1) return 0;" and treats the ERR_PTR as already initialised;
users in mlx5_ib_create_qp() dereference the freed SRQ or ERR_PTR via
to_msrq(devr->s0)->msrq.srqn; and mlx5_ib_dev_res_cleanup() dereferences
the ERR_PTR and double-frees s0 on teardown.
Fix by adding the same `goto unlock` in the s1 failure path. |
| In the Linux kernel, the following vulnerability has been resolved:
ipmi: Add limits to event and receive message requests
The driver would just fetch events and receive messages until the
BMC said it was done. To avoid issues with BMCs that never say they are
done, add a limit of 10 fetches at a time.
In addition, an si interface has an attn state it can return from the
hardware which is supposed to cause a flag fetch to see if the driver
needs to fetch events or message or a few other things. If the attn
bit gets stuck, it's a similar problem. So allow messages in between
flag fetches so the driver itself doesn't get stuck.
This is a more general fix than the previous fix for the specific bad
BMC, but should fix the more general issue of a BMC that won't stop
saying it has data.
This has been there from the beginning of the driver. It's not a bug
per-se, but it is accounting for bugs in BMCs. |
| In the Linux kernel, the following vulnerability has been resolved:
RDMA/mlx4: Fix resource leak on error in mlx4_ib_create_srq()
Sashiko points out that mlx4_srq_alloc() was not undone during error
unwind, add the missing call to mlx4_srq_free(). |
| In the Linux kernel, the following vulnerability has been resolved:
sound: ua101: fix division by zero at probe
Add a missing sanity check for bNrChannels in detect_usb_format()
to prevent a division by zero in playback_urb_complete() and
capture_urb_complete().
USB core does not validate class-specific descriptor fields such
as bNrChannels, so drivers must verify them before use. If a
device provides bNrChannels = 0, frame_bytes becomes zero and is
later used as a divisor in the URB completion handlers, leading
to a kernel crash. |
| In the Linux kernel, the following vulnerability has been resolved:
smb/client: fix out-of-bounds read in symlink_data()
Since smb2_check_message() returns success without length validation for
the symlink error response, in symlink_data() it is possible for
iov->iov_len to be smaller than sizeof(struct smb2_err_rsp). If the buffer
only contains the base SMB2 header (64 bytes), accessing
err->ErrorContextCount (at offset 66) or err->ByteCount later in
symlink_data() will cause an out-of-bounds read. |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: virtio_bt: validate rx pkt_type header length
virtbt_rx_handle() reads the leading pkt_type byte from the RX skb
and forwards the remainder to hci_recv_frame() for every
event/ACL/SCO/ISO type, without checking that the remaining payload
is at least the fixed HCI header for that type.
After the preceding patch bounds the backend-supplied used.len to
[1, VIRTBT_RX_BUF_SIZE], a one-byte completion still reaches
hci_recv_frame() with skb->len already pulled to 0. If the byte
happened to be HCI_ACLDATA_PKT, the ACL-vs-ISO classification
fast-path in hci_dev_classify_pkt_type() dereferences
hci_acl_hdr(skb)->handle whenever the HCI device has an active
CIS_LINK, BIS_LINK, or PA_LINK connection, reading two bytes of
uninitialized RX-buffer data. The same hazard exists for every
packet type the driver accepts because none of the switch cases in
virtbt_rx_handle() check skb->len against the per-type minimum HCI
header size before handing the frame to the core.
After stripping pkt_type, require skb->len to cover the fixed
header size for the selected type (event 2, ACL 4, SCO 3, ISO 4)
before calling hci_recv_frame(); drop ratelimited otherwise.
Unknown pkt_type values still take the original kfree_skb() default
path.
Use bt_dev_err_ratelimited() because both the length and pkt_type
values come from an untrusted backend that can otherwise flood the
kernel log. |
| In the Linux kernel, the following vulnerability has been resolved:
octeon_ep_vf: add NULL check for napi_build_skb()
napi_build_skb() can return NULL on allocation failure. In
__octep_vf_oq_process_rx(), the result is used directly without a NULL
check in both the single-buffer and multi-fragment paths, leading to a
NULL pointer dereference.
Add NULL checks after both napi_build_skb() calls, properly advancing
descriptors and consuming remaining fragments on failure. |
| A stored cross-site scripting (XSS) vulnerability exists in the notification panel of CTI Transmute in versions prior to the patched release. Notification messages containing user-controlled convert names were rendered in the notification bell dropdown using innerHTML without adequate sanitization. An attacker able to create or influence a convert name that is included in a notification could inject arbitrary JavaScript, which would execute in the browser of an authenticated user when they opened the notification panel. Successful exploitation could allow the attacker to perform actions in the victim's session or access information available to the application in the browser context. The issue was remediated by constructing notification elements through DOM methods and assigning notification message content via textContent instead of innerHTML. This vulnerability was only present on a development branch. |
| GitLab has remediated an issue in GitLab CE/EE affecting all versions from 18.9 before 18.10.7, 18.11 before 18.11.4, and 19.0 before 19.0.1 that under certain conditions could have allowed a blocked Project Access Token to continue accessing private resources due to incorrect authorization enforcement. |
| Cross Site Scripting vulnerability in Follet School Solutions Destiny before v22.0.1 AU1 allows a remote attacker to run arbitrary client-side code via the showSupportExpiredMessage parameter of handleloginform.do. |
| Cross Site Scripting vulnerability in Follet School Solutions Destiny before v22.0.1 AU1 allows a remote attacker to run arbitrary client-side code via the site parameter of handleloginform.do. |
| Dlink DWR-X1820 router uses weak default password generated from its IMEI number and does not require users to change it. An attacker who knows how passwords are generated can easily crack the default password if they have the device IMEI number.
This issue was fixed in version 1.00B16CP. |
| In the Linux kernel, the following vulnerability has been resolved:
RDMA/rxe: Reject unknown opcodes before ICRC processing
Even after applying commit 7244491dab34 ("RDMA/rxe: Validate pad and ICRC
before payload_size() in rxe_rcv"), a single unauthenticated UDP packet
can still trigger panic. That patch handled payload_size() underflow only
for valid opcodes with short packets, not for packets carrying an unknown
opcode. The unknown-opcode OOB read described below predates that commit
and reaches back to the initial Soft RoCE driver.
The check added there reads
pkt->paylen < header_size(pkt) + bth_pad(pkt) + RXE_ICRC_SIZE
where header_size(pkt) expands to rxe_opcode[pkt->opcode].length. The
rxe_opcode[] array has 256 entries but is only populated for defined IB
opcodes; any other entry (for example opcode 0xff) is zero-initialized, so
length == 0 and the check degenerates to
pkt->paylen < 0 + bth_pad(pkt) + RXE_ICRC_SIZE
which does not constrain pkt->paylen enough. rxe_icrc_hdr() then computes
rxe_opcode[pkt->opcode].length - RXE_BTH_BYTES
which underflows when length == 0 and passes a huge value to rxe_crc32(),
causing an out-of-bounds read of the skb payload.
Reproduced on v7.0-rc7 with that fix applied, QEMU/KVM with
CONFIG_RDMA_RXE=y and CONFIG_KASAN=y, after
rdma link add rxe0 type rxe netdev eth0
A single 48-byte UDP packet to port 4791 with BTH opcode=0xff and
QPN=IB_MULTICAST_QPN triggers:
BUG: KASAN: slab-out-of-bounds in crc32_le+0x115/0x170
Read of size 1 at addr ...
The buggy address is located 0 bytes to the right of
allocated 704-byte region
Call Trace:
crc32_le+0x115/0x170
rxe_icrc_hdr.isra.0+0x226/0x300
rxe_icrc_check+0x13f/0x3a0
rxe_rcv+0x6e1/0x16e0
rxe_udp_encap_recv+0x20a/0x320
udp_queue_rcv_one_skb+0x7ed/0x12c0
Subsequent packets with the same shape fault on unmapped memory and panic
the kernel. The trigger requires only module load and "rdma link add"; no
QP, no connection, and no authentication.
Fix this by rejecting packets whose opcode has no rxe_opcode[] entry,
detected via the zero mask or zero length, before any length arithmetic
runs. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: mt76: mt7921: fix a potential clc buffer length underflow
The buf_len is used to limit the iterations for retrieving the country
power setting and may underflow under certain conditions due to changes
in the power table in CLC.
This underflow leads to an almost infinite loop or an invalid power
setting resulting in driver initialization failure. |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: hci_event: Fix OOB read and infinite loop in hci_le_create_big_complete_evt
hci_le_create_big_complete_evt() iterates over BT_BOUND connections for
a BIG handle using a while loop, accessing ev->bis_handle[i++] on each
iteration. However, there is no check that i stays within ev->num_bis
before the array access.
When a controller sends a LE_Create_BIG_Complete event with fewer
bis_handle entries than there are BT_BOUND connections for that BIG,
or with num_bis=0, the loop reads beyond the valid bis_handle[] flex
array into adjacent heap memory. Since the out-of-bounds values
typically exceed HCI_CONN_HANDLE_MAX (0x0EFF), hci_conn_set_handle()
rejects them and the connection remains in BT_BOUND state. The same
connection is then found again by hci_conn_hash_lookup_big_state(),
creating an infinite loop with hci_dev_lock held.
Fix this by terminating the BIG if in case not all BIS could be setup
properly. |
| In the Linux kernel, the following vulnerability has been resolved:
smb: client: use kzalloc to zero-initialize security descriptor buffer
Commit 62e7dd0a39c2d ("smb: common: change the data type of num_aces
to le16") split struct smb_acl's __le32 num_aces field into __le16
num_aces and __le16 reserved. The reserved field corresponds to Sbz2
in the MS-DTYP ACL wire format, which must be zero [1].
When building an ACL descriptor in build_sec_desc(), we are using a
kmalloc()'ed descriptor buffer and writing the fields explicitly using
le16() writes now. This never writes to the 2 byte reserved field,
leaving it as uninitialized heap data.
When the reserved field happens to contain non-zero slab garbage,
Samba rejects the security descriptor with "ndr_pull_security_descriptor
failed: Range Error", causing chmod to fail with EINVAL.
Change kmalloc() to kzalloc() to ensure the entire buffer is
zero-initialized.
[1] https://learn.microsoft.com/en-us/openspecs/windows_protocols/ms-dtyp/20233ed8-a6c6-4097-aafa-dd545ed24428 |
