| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
vsock: Ignore signal/timeout on connect() if already established
During connect(), acting on a signal/timeout by disconnecting an already
established socket leads to several issues:
1. connect() invoking vsock_transport_cancel_pkt() ->
virtio_transport_purge_skbs() may race with sendmsg() invoking
virtio_transport_get_credit(). This results in a permanently elevated
`vvs->bytes_unsent`. Which, in turn, confuses the SOCK_LINGER handling.
2. connect() resetting a connected socket's state may race with socket
being placed in a sockmap. A disconnected socket remaining in a sockmap
breaks sockmap's assumptions. And gives rise to WARNs.
3. connect() transitioning SS_CONNECTED -> SS_UNCONNECTED allows for a
transport change/drop after TCP_ESTABLISHED. Which poses a problem for
any simultaneous sendmsg() or connect() and may result in a
use-after-free/null-ptr-deref.
Do not disconnect socket on signal/timeout. Keep the logic for unconnected
sockets: they don't linger, can't be placed in a sockmap, are rejected by
sendmsg().
[1]: https://lore.kernel.org/netdev/e07fd95c-9a38-4eea-9638-133e38c2ec9b@rbox.co/
[2]: https://lore.kernel.org/netdev/20250317-vsock-trans-signal-race-v4-0-fc8837f3f1d4@rbox.co/
[3]: https://lore.kernel.org/netdev/60f1b7db-3099-4f6a-875e-af9f6ef194f6@rbox.co/ |
| In the Linux kernel, the following vulnerability has been resolved:
ocfs2: clear extent cache after moving/defragmenting extents
The extent map cache can become stale when extents are moved or
defragmented, causing subsequent operations to see outdated extent flags.
This triggers a BUG_ON in ocfs2_refcount_cal_cow_clusters().
The problem occurs when:
1. copy_file_range() creates a reflinked extent with OCFS2_EXT_REFCOUNTED
2. ioctl(FITRIM) triggers ocfs2_move_extents()
3. __ocfs2_move_extents_range() reads and caches the extent (flags=0x2)
4. ocfs2_move_extent()/ocfs2_defrag_extent() calls __ocfs2_move_extent()
which clears OCFS2_EXT_REFCOUNTED flag on disk (flags=0x0)
5. The extent map cache is not invalidated after the move
6. Later write() operations read stale cached flags (0x2) but disk has
updated flags (0x0), causing a mismatch
7. BUG_ON(!(rec->e_flags & OCFS2_EXT_REFCOUNTED)) triggers
Fix by clearing the extent map cache after each extent move/defrag
operation in __ocfs2_move_extents_range(). This ensures subsequent
operations read fresh extent data from disk. |
| In the Linux kernel, the following vulnerability has been resolved:
hwmon: (cgbc-hwmon) Add missing NULL check after devm_kzalloc()
The driver allocates memory for sensor data using devm_kzalloc(), but
did not check if the allocation succeeded. In case of memory allocation
failure, dereferencing the NULL pointer would lead to a kernel crash.
Add a NULL pointer check and return -ENOMEM to handle allocation failure
properly. |
| In the Linux kernel, the following vulnerability has been resolved:
af_unix: Initialise scc_index in unix_add_edge().
Quang Le reported that the AF_UNIX GC could garbage-collect a
receive queue of an alive in-flight socket, with a nice repro.
The repro consists of three stages.
1)
1-a. Create a single cyclic reference with many sockets
1-b. close() all sockets
1-c. Trigger GC
2)
2-a. Pass sk-A to an embryo sk-B
2-b. Pass sk-X to sk-X
2-c. Trigger GC
3)
3-a. accept() the embryo sk-B
3-b. Pass sk-B to sk-C
3-c. close() the in-flight sk-A
3-d. Trigger GC
As of 2-c, sk-A and sk-X are linked to unix_unvisited_vertices,
and unix_walk_scc() groups them into two different SCCs:
unix_sk(sk-A)->vertex->scc_index = 2 (UNIX_VERTEX_INDEX_START)
unix_sk(sk-X)->vertex->scc_index = 3
Once GC completes, unix_graph_grouped is set to true.
Also, unix_graph_maybe_cyclic is set to true due to sk-X's
cyclic self-reference, which makes close() trigger GC.
At 3-b, unix_add_edge() allocates unix_sk(sk-B)->vertex and
links it to unix_unvisited_vertices.
unix_update_graph() is called at 3-a. and 3-b., but neither
unix_graph_grouped nor unix_graph_maybe_cyclic is changed
because both sk-B's listener and sk-C are not in-flight.
3-c decrements sk-A's file refcnt to 1.
Since unix_graph_grouped is true at 3-d, unix_walk_scc_fast()
is finally called and iterates 3 sockets sk-A, sk-B, and sk-X:
sk-A -> sk-B (-> sk-C)
sk-X -> sk-X
This is totally fine. All of them are not yet close()d and
should be grouped into different SCCs.
However, unix_vertex_dead() misjudges that sk-A and sk-B are
in the same SCC and sk-A is dead.
unix_sk(sk-A)->scc_index == unix_sk(sk-B)->scc_index <-- Wrong!
&&
sk-A's file refcnt == unix_sk(sk-A)->vertex->out_degree
^-- 1 in-flight count for sk-B
-> sk-A is dead !?
The problem is that unix_add_edge() does not initialise scc_index.
Stage 1) is used for heap spraying, making a newly allocated
vertex have vertex->scc_index == 2 (UNIX_VERTEX_INDEX_START)
set by unix_walk_scc() at 1-c.
Let's track the max SCC index from the previous unix_walk_scc()
call and assign the max + 1 to a new vertex's scc_index.
This way, we can continue to avoid Tarjan's algorithm while
preventing misjudgments. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amdgpu: hide VRAM sysfs attributes on GPUs without VRAM
Otherwise accessing them can cause a crash. |
| In the Linux kernel, the following vulnerability has been resolved:
scsi: lpfc: Fix memory leak in lpfc_create_port()
Commit 5e633302ace1 ("scsi: lpfc: vmid: Add support for VMID in mailbox
command") introduced allocations for the VMID resources in
lpfc_create_port() after the call to scsi_host_alloc(). Upon failure on the
VMID allocations, the new code would branch to the 'out' label, which
returns NULL without unwinding anything, thus skipping the call to
scsi_host_put().
Fix the problem by creating a separate label 'out_free_vmid' to unwind the
VMID resources and make the 'out_put_shost' label call only
scsi_host_put(), as was done before the introduction of allocations for
VMID. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: ath9k: hif_usb: Fix use-after-free in ath9k_hif_usb_reg_in_cb()
It is possible that skb is freed in ath9k_htc_rx_msg(), then
usb_submit_urb() fails and we try to free skb again. It causes
use-after-free bug. Moreover, if alloc_skb() fails, urb->context becomes
NULL but rx_buf is not freed and there can be a memory leak.
The patch removes unnecessary nskb and makes skb processing more clear: it
is supposed that ath9k_htc_rx_msg() either frees old skb or passes its
managing to another callback function.
Found by Linux Verification Center (linuxtesting.org) with Syzkaller. |
| In the Linux kernel, the following vulnerability has been resolved:
powerpc/rtas: avoid device tree lookups in rtas_os_term()
rtas_os_term() is called during panic. Its behavior depends on a couple
of conditions in the /rtas node of the device tree, the traversal of
which entails locking and local IRQ state changes. If the kernel panics
while devtree_lock is held, rtas_os_term() as currently written could
hang.
Instead of discovering the relevant characteristics at panic time,
cache them in file-static variables at boot. Note the lookup for
"ibm,extended-os-term" is converted to of_property_read_bool() since it
is a boolean property, not an RTAS function token.
[mpe: Incorporate suggested change from Nick] |
| In the Linux kernel, the following vulnerability has been resolved:
ext4: fix inode leak in ext4_xattr_inode_create() on an error path
There is issue as follows when do setxattr with inject fault:
[localhost]# fsck.ext4 -fn /dev/sda
e2fsck 1.46.6-rc1 (12-Sep-2022)
Pass 1: Checking inodes, blocks, and sizes
Pass 2: Checking directory structure
Pass 3: Checking directory connectivity
Pass 4: Checking reference counts
Unattached zero-length inode 15. Clear? no
Unattached inode 15
Connect to /lost+found? no
Pass 5: Checking group summary information
/dev/sda: ********** WARNING: Filesystem still has errors **********
/dev/sda: 15/655360 files (0.0% non-contiguous), 66755/2621440 blocks
This occurs in 'ext4_xattr_inode_create()'. If 'ext4_mark_inode_dirty()'
fails, dropping i_nlink of the inode is needed. Or will lead to inode leak. |
| In the Linux kernel, the following vulnerability has been resolved:
nilfs2: fix shift-out-of-bounds due to too large exponent of block size
If field s_log_block_size of superblock data is corrupted and too large,
init_nilfs() and load_nilfs() still can trigger a shift-out-of-bounds
warning followed by a kernel panic (if panic_on_warn is set):
shift exponent 38973 is too large for 32-bit type 'int'
Call Trace:
<TASK>
dump_stack_lvl+0xcd/0x134
ubsan_epilogue+0xb/0x50
__ubsan_handle_shift_out_of_bounds.cold.12+0x17b/0x1f5
init_nilfs.cold.11+0x18/0x1d [nilfs2]
nilfs_mount+0x9b5/0x12b0 [nilfs2]
...
This fixes the issue by adding and using a new helper function for getting
block size with sanity check. |
| In the Linux kernel, the following vulnerability has been resolved:
fs/ntfs3: Fix slab-out-of-bounds in r_page
When PAGE_SIZE is 64K, if read_log_page is called by log_read_rst for
the first time, the size of *buffer would be equal to
DefaultLogPageSize(4K).But for *buffer operations like memcpy,
if the memory area size(n) which being assigned to buffer is larger
than 4K (log->page_size(64K) or bytes(64K-page_off)), it will cause
an out of boundary error.
Call trace:
[...]
kasan_report+0x44/0x130
check_memory_region+0xf8/0x1a0
memcpy+0xc8/0x100
ntfs_read_run_nb+0x20c/0x460
read_log_page+0xd0/0x1f4
log_read_rst+0x110/0x75c
log_replay+0x1e8/0x4aa0
ntfs_loadlog_and_replay+0x290/0x2d0
ntfs_fill_super+0x508/0xec0
get_tree_bdev+0x1fc/0x34c
[...]
Fix this by setting variable r_page to NULL in log_read_rst. |
| In the Linux kernel, the following vulnerability has been resolved:
nfc: virtual_ncidev: Fix memory leak in virtual_nci_send()
skb should be free in virtual_nci_send(), otherwise kmemleak will report
memleak.
Steps for reproduction (simulated in qemu):
cd tools/testing/selftests/nci
make
./nci_dev
BUG: memory leak
unreferenced object 0xffff888107588000 (size 208):
comm "nci_dev", pid 206, jiffies 4294945376 (age 368.248s)
hex dump (first 32 bytes):
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
backtrace:
[<000000008d94c8fd>] __alloc_skb+0x1da/0x290
[<00000000278bc7f8>] nci_send_cmd+0xa3/0x350
[<0000000081256a22>] nci_reset_req+0x6b/0xa0
[<000000009e721112>] __nci_request+0x90/0x250
[<000000005d556e59>] nci_dev_up+0x217/0x5b0
[<00000000e618ce62>] nfc_dev_up+0x114/0x220
[<00000000981e226b>] nfc_genl_dev_up+0x94/0xe0
[<000000009bb03517>] genl_family_rcv_msg_doit.isra.14+0x228/0x2d0
[<00000000b7f8c101>] genl_rcv_msg+0x35c/0x640
[<00000000c94075ff>] netlink_rcv_skb+0x11e/0x350
[<00000000440cfb1e>] genl_rcv+0x24/0x40
[<0000000062593b40>] netlink_unicast+0x43f/0x640
[<000000001d0b13cc>] netlink_sendmsg+0x73a/0xbf0
[<000000003272487f>] __sys_sendto+0x324/0x370
[<00000000ef9f1747>] __x64_sys_sendto+0xdd/0x1b0
[<000000001e437841>] do_syscall_64+0x3f/0x90 |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: Prevent decl_tag from being referenced in func_proto arg
Syzkaller managed to hit another decl_tag issue:
btf_func_proto_check kernel/bpf/btf.c:4506 [inline]
btf_check_all_types kernel/bpf/btf.c:4734 [inline]
btf_parse_type_sec+0x1175/0x1980 kernel/bpf/btf.c:4763
btf_parse kernel/bpf/btf.c:5042 [inline]
btf_new_fd+0x65a/0xb00 kernel/bpf/btf.c:6709
bpf_btf_load+0x6f/0x90 kernel/bpf/syscall.c:4342
__sys_bpf+0x50a/0x6c0 kernel/bpf/syscall.c:5034
__do_sys_bpf kernel/bpf/syscall.c:5093 [inline]
__se_sys_bpf kernel/bpf/syscall.c:5091 [inline]
__x64_sys_bpf+0x7c/0x90 kernel/bpf/syscall.c:5091
do_syscall_64+0x54/0x70 arch/x86/entry/common.c:48
This seems similar to commit ea68376c8bed ("bpf: prevent decl_tag from being
referenced in func_proto") but for the argument. |
| In the Linux kernel, the following vulnerability has been resolved:
RDMA/rxe: Fix NULL-ptr-deref in rxe_qp_do_cleanup() when socket create failed
There is a null-ptr-deref when mount.cifs over rdma:
BUG: KASAN: null-ptr-deref in rxe_qp_do_cleanup+0x2f3/0x360 [rdma_rxe]
Read of size 8 at addr 0000000000000018 by task mount.cifs/3046
CPU: 2 PID: 3046 Comm: mount.cifs Not tainted 6.1.0-rc5+ #62
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.14.0-1.fc3
Call Trace:
<TASK>
dump_stack_lvl+0x34/0x44
kasan_report+0xad/0x130
rxe_qp_do_cleanup+0x2f3/0x360 [rdma_rxe]
execute_in_process_context+0x25/0x90
__rxe_cleanup+0x101/0x1d0 [rdma_rxe]
rxe_create_qp+0x16a/0x180 [rdma_rxe]
create_qp.part.0+0x27d/0x340
ib_create_qp_kernel+0x73/0x160
rdma_create_qp+0x100/0x230
_smbd_get_connection+0x752/0x20f0
smbd_get_connection+0x21/0x40
cifs_get_tcp_session+0x8ef/0xda0
mount_get_conns+0x60/0x750
cifs_mount+0x103/0xd00
cifs_smb3_do_mount+0x1dd/0xcb0
smb3_get_tree+0x1d5/0x300
vfs_get_tree+0x41/0xf0
path_mount+0x9b3/0xdd0
__x64_sys_mount+0x190/0x1d0
do_syscall_64+0x35/0x80
entry_SYSCALL_64_after_hwframe+0x46/0xb0
The root cause of the issue is the socket create failed in
rxe_qp_init_req().
So move the reset rxe_qp_do_cleanup() after the NULL ptr check. |
| In the Linux kernel, the following vulnerability has been resolved:
io_uring: fix regbuf vector size truncation
There is a report of io_estimate_bvec_size() truncating the calculated
number of segments that leads to corruption issues. Check it doesn't
overflow "int"s used later. Rough but simple, can be improved on top. |
| In the Linux kernel, the following vulnerability has been resolved:
ASoC: codecs: tx-macro: Fix for KASAN: slab-out-of-bounds
When we run syzkaller we get below Out of Bound.
"KASAN: slab-out-of-bounds Read in regcache_flat_read"
Below is the backtrace of the issue:
dump_backtrace+0x0/0x4c8
show_stack+0x34/0x44
dump_stack_lvl+0xd8/0x118
print_address_description+0x30/0x2d8
kasan_report+0x158/0x198
__asan_report_load4_noabort+0x44/0x50
regcache_flat_read+0x10c/0x110
regcache_read+0xf4/0x180
_regmap_read+0xc4/0x278
_regmap_update_bits+0x130/0x290
regmap_update_bits_base+0xc0/0x15c
snd_soc_component_update_bits+0xa8/0x22c
snd_soc_component_write_field+0x68/0xd4
tx_macro_digital_mute+0xec/0x140
Actually There is no need to have decimator with 32 bits.
By limiting the variable with short type u8 issue is resolved. |
| In the Linux kernel, the following vulnerability has been resolved:
cifs: fix potential oops in cifs_oplock_break
With deferred close we can have closes that race with lease breaks,
and so with the current checks for whether to send the lease response,
oplock_response(), this can mean that an unmount (kill_sb) can occur
just before we were checking if the tcon->ses is valid. See below:
[Fri Aug 4 04:12:50 2023] RIP: 0010:cifs_oplock_break+0x1f7/0x5b0 [cifs]
[Fri Aug 4 04:12:50 2023] Code: 7d a8 48 8b 7d c0 c0 e9 02 48 89 45 b8 41 89 cf e8 3e f5 ff ff 4c 89 f7 41 83 e7 01 e8 82 b3 03 f2 49 8b 45 50 48 85 c0 74 5e <48> 83 78 60 00 74 57 45 84 ff 75 52 48 8b 43 98 48 83 eb 68 48 39
[Fri Aug 4 04:12:50 2023] RSP: 0018:ffffb30607ddbdf8 EFLAGS: 00010206
[Fri Aug 4 04:12:50 2023] RAX: 632d223d32612022 RBX: ffff97136944b1e0 RCX: 0000000080100009
[Fri Aug 4 04:12:50 2023] RDX: 0000000000000001 RSI: 0000000080100009 RDI: ffff97136944b188
[Fri Aug 4 04:12:50 2023] RBP: ffffb30607ddbe58 R08: 0000000000000001 R09: ffffffffc08e0900
[Fri Aug 4 04:12:50 2023] R10: 0000000000000001 R11: 000000000000000f R12: ffff97136944b138
[Fri Aug 4 04:12:50 2023] R13: ffff97149147c000 R14: ffff97136944b188 R15: 0000000000000000
[Fri Aug 4 04:12:50 2023] FS: 0000000000000000(0000) GS:ffff9714f7c00000(0000) knlGS:0000000000000000
[Fri Aug 4 04:12:50 2023] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[Fri Aug 4 04:12:50 2023] CR2: 00007fd8de9c7590 CR3: 000000011228e000 CR4: 0000000000350ef0
[Fri Aug 4 04:12:50 2023] Call Trace:
[Fri Aug 4 04:12:50 2023] <TASK>
[Fri Aug 4 04:12:50 2023] process_one_work+0x225/0x3d0
[Fri Aug 4 04:12:50 2023] worker_thread+0x4d/0x3e0
[Fri Aug 4 04:12:50 2023] ? process_one_work+0x3d0/0x3d0
[Fri Aug 4 04:12:50 2023] kthread+0x12a/0x150
[Fri Aug 4 04:12:50 2023] ? set_kthread_struct+0x50/0x50
[Fri Aug 4 04:12:50 2023] ret_from_fork+0x22/0x30
[Fri Aug 4 04:12:50 2023] </TASK>
To fix this change the ordering of the checks before sending the oplock_response
to first check if the openFileList is empty. |
| In the Linux kernel, the following vulnerability has been resolved:
SUNRPC: double free xprt_ctxt while still in use
When an RPC request is deferred, the rq_xprt_ctxt pointer is moved out
of the svc_rqst into the svc_deferred_req.
When the deferred request is revisited, the pointer is copied into
the new svc_rqst - and also remains in the svc_deferred_req.
In the (rare?) case that the request is deferred a second time, the old
svc_deferred_req is reused - it still has all the correct content.
However in that case the rq_xprt_ctxt pointer is NOT cleared so that
when xpo_release_xprt is called, the ctxt is freed (UDP) or possible
added to a free list (RDMA).
When the deferred request is revisited for a second time, it will
reference this ctxt which may be invalid, and the free the object a
second time which is likely to oops.
So change svc_defer() to *always* clear rq_xprt_ctxt, and assert that
the value is now stored in the svc_deferred_req. |
| In the Linux kernel, the following vulnerability has been resolved:
RDMA/srpt: Add a check for valid 'mad_agent' pointer
When unregistering MAD agent, srpt module has a non-null check
for 'mad_agent' pointer before invoking ib_unregister_mad_agent().
This check can pass if 'mad_agent' variable holds an error value.
The 'mad_agent' can have an error value for a short window when
srpt_add_one() and srpt_remove_one() is executed simultaneously.
In srpt module, added a valid pointer check for 'sport->mad_agent'
before unregistering MAD agent.
This issue can hit when RoCE driver unregisters ib_device
Stack Trace:
------------
BUG: kernel NULL pointer dereference, address: 000000000000004d
PGD 145003067 P4D 145003067 PUD 2324fe067 PMD 0
Oops: 0002 [#1] PREEMPT SMP NOPTI
CPU: 10 PID: 4459 Comm: kworker/u80:0 Kdump: loaded Tainted: P
Hardware name: Dell Inc. PowerEdge R640/06NR82, BIOS 2.5.4 01/13/2020
Workqueue: bnxt_re bnxt_re_task [bnxt_re]
RIP: 0010:_raw_spin_lock_irqsave+0x19/0x40
Call Trace:
ib_unregister_mad_agent+0x46/0x2f0 [ib_core]
IPv6: ADDRCONF(NETDEV_CHANGE): bond0: link becomes ready
? __schedule+0x20b/0x560
srpt_unregister_mad_agent+0x93/0xd0 [ib_srpt]
srpt_remove_one+0x20/0x150 [ib_srpt]
remove_client_context+0x88/0xd0 [ib_core]
bond0: (slave p2p1): link status definitely up, 100000 Mbps full duplex
disable_device+0x8a/0x160 [ib_core]
bond0: active interface up!
? kernfs_name_hash+0x12/0x80
(NULL device *): Bonding Info Received: rdev: 000000006c0b8247
__ib_unregister_device+0x42/0xb0 [ib_core]
(NULL device *): Master: mode: 4 num_slaves:2
ib_unregister_device+0x22/0x30 [ib_core]
(NULL device *): Slave: id: 105069936 name:p2p1 link:0 state:0
bnxt_re_stopqps_and_ib_uninit+0x83/0x90 [bnxt_re]
bnxt_re_alloc_lag+0x12e/0x4e0 [bnxt_re] |
| In the Linux kernel, the following vulnerability has been resolved:
fbdev: udlfb: Fix endpoint check
The syzbot fuzzer detected a problem in the udlfb driver, caused by an
endpoint not having the expected type:
usb 1-1: Read EDID byte 0 failed: -71
usb 1-1: Unable to get valid EDID from device/display
------------[ cut here ]------------
usb 1-1: BOGUS urb xfer, pipe 3 != type 1
WARNING: CPU: 0 PID: 9 at drivers/usb/core/urb.c:504 usb_submit_urb+0xed6/0x1880
drivers/usb/core/urb.c:504
Modules linked in:
CPU: 0 PID: 9 Comm: kworker/0:1 Not tainted
6.4.0-rc1-syzkaller-00016-ga4422ff22142 #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google
04/28/2023
Workqueue: usb_hub_wq hub_event
RIP: 0010:usb_submit_urb+0xed6/0x1880 drivers/usb/core/urb.c:504
...
Call Trace:
<TASK>
dlfb_submit_urb+0x92/0x180 drivers/video/fbdev/udlfb.c:1980
dlfb_set_video_mode+0x21f0/0x2950 drivers/video/fbdev/udlfb.c:315
dlfb_ops_set_par+0x2a7/0x8d0 drivers/video/fbdev/udlfb.c:1111
dlfb_usb_probe+0x149a/0x2710 drivers/video/fbdev/udlfb.c:1743
The current approach for this issue failed to catch the problem
because it only checks for the existence of a bulk-OUT endpoint; it
doesn't check whether this endpoint is the one that the driver will
actually use.
We can fix the problem by instead checking that the endpoint used by
the driver does exist and is bulk-OUT. |
