| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| A vulnerability in the pluggable authentication module (PAM) of Juniper Networks Junos OS may allow an unauthenticated network based attacker to potentially execute arbitrary code or crash daemons such as telnetd or sshd that make use of PAM. Affected Juniper Networks Junos OS releases are: 14.1 from 14.1R5 prior to 14.1R8-S4, 14.1R9; 14.1X53 prior to 14.1X53-D50 on EX and QFX series; 14.2 from 14.2R3 prior to 14.2R7-S8, 14.2R8; No other Junos OS releases are affected by this issue. No other Juniper Networks products are affected by this issue. |
| A persistent cross site scripting vulnerability in NetScreen WebUI of Juniper Networks Juniper NetScreen Firewall+VPN running ScreenOS allows a user with the 'security' role to inject HTML/JavaScript content into the management session of other users including the administrator. This enables the lower-privileged user to effectively execute commands with the permissions of an administrator. This issue affects Juniper Networks ScreenOS 6.3.0 releases prior to 6.3.0r24 on SSG Series. No other Juniper Networks products or platforms are affected by this issue. |
| When Express Path (formerly known as service offloading) is configured on Juniper Networks SRX1400, SRX3400, SRX3600, SRX5400, SRX5600, SRX5800 in high availability cluster configuration mode, certain multicast packets might cause the flowd process to crash, halting or interrupting traffic from flowing through the device and triggering RG1+ (data-plane) fail-over to the secondary node. Repeated crashes of the flowd process may constitute an extended denial of service condition. This service is not enabled by default and is only supported in high-end SRX platforms. Affected releases are Juniper Networks Junos OS 12.3X48 prior to 12.3X48-D45, 15.1X49 prior to 15.1X49-D80 on SRX1400, SRX3400, SRX3600, SRX5400, SRX5600, SRX5800. |
| On Juniper Networks devices running Junos OS affected versions and with LDP enabled, a specific LDP packet destined to the RE (Routing Engine) will consume a small amount of the memory allocated for the rpd (routing protocol daemon) process. Over time, repeatedly receiving this type of LDP packet(s) will cause the memory to exhaust and the rpd process to crash and restart. It is not possible to free up the memory that has been consumed without restarting the rpd process. This issue affects Junos OS based devices with either IPv4 or IPv6 LDP enabled via the [protocols ldp] configuration (the native IPv6 support for LDP is available in Junos OS 16.1 and higher). The interface on which the packet arrives needs to have LDP enabled. The affected Junos versions are: 13.3 prior to 13.3R10; 14.1 prior to 14.1R8; 14.2 prior to 14.2R7-S6 or 14.2R8; 15.1 prior to 15.1F2-S14, 15.1F6-S4, 15.1F7, 15.1R4-S7, 15.1R5; 15.1X49 before 15.1X49-D70; 15.1X53 before 15.1X53-D230, 15.1X53-D63, 15.1X53-D70; 16.1 before 16.1R2. 16.2R1 and all subsequent releases have a resolution for this vulnerability. |
| A remote unauthenticated network based attacker with access to Junos Space may execute arbitrary code on Junos Space or gain access to devices managed by Junos Space using cross site request forgery (CSRF), default authentication credentials, information leak and command injection attack vectors. All versions of Juniper Networks Junos Space prior to 15.1R3 are affected. |
| Certain combinations of Junos OS CLI commands and arguments have been found to be exploitable in a way that can allow unauthorized access to the operating system. This may allow any user with permissions to run these CLI commands the ability to achieve elevated privileges and gain complete control of the device. Affected releases are Juniper Networks Junos OS 11.4 prior to 11.4R13-S3; 12.1X46 prior to 12.1X46-D60; 12.1X47 prior to 12.1X47-D45; 12.3 prior to 12.3R12; 12.3X48 prior to 12.3X48-D35; 13.2 prior to 13.2R9; 13.3 prior to 13.3R4-S11, 13.3R9; 14.1 prior to 14.1R4-S12, 14.1R7; 14.1X53 prior to 14.1X53-D28, 14.1X53-D40; 14.1X55 prior to 14.1X55-D35; 14.2 prior to 14.2R3-S10, 14.2R4-S7, 14.2R5; 15.1 prior to 15.1F4, 15.1R3; 15.1X49 prior to 15.1X49-D60; 15.1X53 prior to 15.1X53-D57, 15.1X53-D70. |
| A denial of service vulnerability in Juniper Networks NorthStar Controller Application prior to version 2.1.0 Service Pack 1 may allow an unauthenticated, unprivileged, network-based attacker to cause denials of services to underlying database tables leading to potential information disclosure, modification of system states, and partial to full denial of services relying upon data modified by an attacker. |
| Juniper Networks Junos OS on SRX series devices do not verify the HTTPS server certificate before downloading anti-virus updates. This may allow a man-in-the-middle attacker to inject bogus signatures to cause service disruptions or make the device not detect certain types of attacks. Affected Junos OS releases are: 12.1X46 prior to 12.1X46-D71; 12.3X48 prior to 12.3X48-D55; 15.1X49 prior to 15.1X49-D110; |
| An Improper Input Validation vulnerability in the Routing Protocol Daemon (rpd) of Juniper Networks Junos OS and Junos OS Evolved allows an unauthenticated network-based attacker to cause a Denial of Service (DoS). If a BGP update message is received over an established BGP session, and that message contains a specific, optional transitive attribute, this session will be torn down with an update message error. This issue cannot propagate beyond an affected system as the processing error occurs as soon as the update is received. This issue is exploitable remotely as the respective attribute will propagate through unaffected systems and intermediate AS (if any). Continuous receipt of a BGP update containing this attribute will create a sustained Denial of Service (DoS) condition. Since this issue only affects 22.3R1, Juniper strongly encourages customers to move to 22.3R1-S1. Juniper SIRT felt that the need to promptly warn customers about this issue affecting the 22.3R1 versions of Junos OS and Junos OS Evolved warranted an Out of Cycle JSA. This issue affects: Juniper Networks Junos OS version 22.3R1. Juniper Networks Junos OS Evolved version 22.3R1-EVO. This issue does not affect: Juniper Networks Junos OS versions prior to 22.3R1. Juniper Networks Junos OS Evolved versions prior to 22.3R1-EVO. |
| Unspecified vulnerability in Juniper Junos before 11.4R10-S1, before 11.4R11, 12.1X44 before 12.1X44-D26, 12.1X44 before 12.1X44-D30, 12.1X45 before 12.1X45-D20, and 12.1X46 before 12.1X46-D10, when Dynamic IPsec VPN is configured, allows remote attackers to cause a denial of service (new Dynamic VPN connection failures and CPU and disk consumption) via unknown vectors. |
| Juniper Junos OS before 12.1X44-D50, 12.1X46 before 12.1X46-D35, 12.1X47 before 12.1X47-D25, 12.3 before 12.3R9, 12.3X48 before 12.3X48-D15, 13.2 before 13.2R7, 13.2X51 before 13.2X51-D35, 13.3 before 13.3R6, 14.1 before 14.1R5, 14.1X50 before 14.1X50-D105, 14.1X51 before 14.1X51-D70, 14.1X53 before 14.1X53-D25, 14.1X55 before 14.1X55-D20, 14.2 before 14.2R1, 15.1 before 15.1F2 or 15.1R1, and 15.1X49 before 15.1X49-D10 does not require a password for the root user when pam.conf is "corrupted," which allows local users to gain root privileges by modifying the file. |
| Race condition in the Op command in Juniper Junos OS before 12.1X44-D55, 12.1X46 before 12.1X46-D40, 12.1X47 before 12.1X47-D25, 12.3 before 12.3R11, 12.3X48 before 12.3X48-D20, 12.3X50 before 12.3X50-D50, 13.2 before 13.2R8, 13.2X51 before 13.2X51-D39, 13.2X52 before 13.2X52-D30, 13.3 before 13.3R7, 14.1 before 14.1R6, 14.1X53 before 14.1X53-D30, 14.2 before 14.2R4, 15.1 before 15.1F2 or 15.1R2, 15.1X49 before 15.1X49-D10 or 15.1X49-D20, and 16.1 before 16.1R1 allows remote authenticated users to gain privileges via the URL option. |
| The Secure Meeting (Pulse Collaboration) in Pulse Connect Secure (formerly Juniper Junos Pulse) before 7.1R22.1, 7.4, 8.0 before 8.0R11, and 8.1 before 8.1R3 allows remote authenticated users to bypass intended access restrictions and log into arbitrary meetings by leveraging a meeting id and meetingAppSun.jar. |
| Unspecified vulnerability in Oracle Java SE 5.0u61, 6u71, 7u51, and 8; JRockit R27.8.1 and R28.3.1; and Java SE Embedded 7u51 allows remote attackers to affect confidentiality and integrity via unknown vectors related to Security. |
| Juniper Junos OS before 12.1X46-D50, 12.1X47 before 12.1X47-D23, 12.3X48 before 12.3X48-D25, and 15.1X49 before 15.1X49-D40 on a High-End SRX-Series chassis system with one or more Application Layer Gateways (ALGs) enabled allow remote attackers to cause a denial of service (CPU consumption, fab link failure, or flip-flop failovers) via vectors related to in-transit traffic matching ALG rules. |
| Juniper Junos 11.4 before R11, 12.1 before R9, 12.1X44 before D30, 12.1X45 before D20, 12.1X46 before D15, 12.1X47 before D10, 12.2 before R8, 12.2X50 before D70, 12.3 before R6, 13.1 before R4, 13.1X49 before D55, 13.1X50 before D30, 13.2 before R4, 13.2X50 before D20, 13.2X51 before D15, 13.2X52 before D15, 13.3 before R1, when using an em interface to connect to a certain internal network, allows remote attackers to cause a denial of service (em driver bock and FPC reset or "go offline") via a series of crafted (1) CLNP fragmented packets, when clns-routing or ESIS is configured, or (2) IPv4 or (3) IPv6 fragmented packets. |
| Juniper Junos OS before 13.3R9, 14.1R6 before 14.1R6-S1, and 14.1 before 14.1R7, when configured with VPLS routing-instances, allows remote attackers to obtain sensitive mbuf information by injecting a flood of Ethernet frames with IPv6 MAC addresses directly into a connected interface. |
| Cross-site scripting (XSS) vulnerability in the Pulse Collaboration (Secure Meeting) user pages in Juniper Junos Pulse Secure Access Service (aka SSL VPN) with IVE OS before 7.1r18, 7.3 before 7.3r10, 7.4 before 7.4r8, and 8.0 before 8.0r1 allows remote authenticated users to inject arbitrary web script or HTML via unspecified vectors. |
| Juniper Junos 11.4 before R12-S4, 12.1X44 before D35, 12.1X45 before D30, 12.1X46 before D25, 12.1X47 before D10, 12.2 before R9, 12.2X50 before D70, 12.3 before R7, 13.1 before R4 before S3, 13.1X49 before D55, 13.1X50 before D30, 13.2 before R5, 13.2X50 before D20, 13.2X51 before D26 and D30, 13.2X52 before D15, 13.3 before R3, and 14.1 before R1 allows remote attackers to cause a denial of service (router protocol daemon crash) via a crafted RSVP PATH message. |
| The SSH server in Juniper Junos OS before 12.1X44-D50, 12.1X46 before 12.1X46-D35, 12.1X47 before 12.1X47-D25, 12.3 before 12.3R10, 12.3X48 before 12.3X48-D10, 13.2 before 13.2R8, 13.2X51 before 13.2X51-D35, 13.3 before 13.3R6, 14.1 before 14.1R5, 14.1X53 before 14.1X53-D25, 14.2 before 14.2R3, 15.1 before 15.1R1, and 15.1X49 before 15.1X49-D20 allows remote attackers to cause a denial of service (CPU consumption) via unspecified SSH traffic. |
