| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
arm64: Add support for TSV110 Spectre-BHB mitigation
The TSV110 processor is vulnerable to the Spectre-BHB (Branch History
Buffer) attack, which can be exploited to leak information through
branch prediction side channels. This commit adds the MIDR of TSV110
to the list for software mitigation. |
| In the Linux kernel, the following vulnerability has been resolved:
KVM: x86: Ignore -EBUSY when checking nested events from vcpu_block()
Ignore -EBUSY when checking nested events after exiting a blocking state
while L2 is active, as exiting to userspace will generate a spurious
userspace exit, usually with KVM_EXIT_UNKNOWN, and likely lead to the VM's
demise. Continuing with the wakeup isn't perfect either, as *something*
has gone sideways if a vCPU is awakened in L2 with an injected event (or
worse, a nested run pending), but continuing on gives the VM a decent
chance of surviving without any major side effects.
As explained in the Fixes commits, it _should_ be impossible for a vCPU to
be put into a blocking state with an already-injected event (exception,
IRQ, or NMI). Unfortunately, userspace can stuff MP_STATE and/or injected
events, and thus put the vCPU into what should be an impossible state.
Don't bother trying to preserve the WARN, e.g. with an anti-syzkaller
Kconfig, as WARNs can (hopefully) be added in paths where _KVM_ would be
violating x86 architecture, e.g. by WARNing if KVM attempts to inject an
exception or interrupt while the vCPU isn't running. |
| In the Linux kernel, the following vulnerability has been resolved:
fbdev: of: display_timing: fix refcount leak in of_get_display_timings()
of_parse_phandle() returns a device_node with refcount incremented,
which is stored in 'entry' and then copied to 'native_mode'. When the
error paths at lines 184 or 192 jump to 'entryfail', native_mode's
refcount is not decremented, causing a refcount leak.
Fix this by changing the goto target from 'entryfail' to 'timingfail',
which properly calls of_node_put(native_mode) before cleanup. |
| In the Linux kernel, the following vulnerability has been resolved:
bnxt_en: Fix RSS context delete logic
We need to free the corresponding RSS context VNIC
in FW everytime an RSS context is deleted in driver.
Commit 667ac333dbb7 added a check to delete the VNIC
in FW only when netif_running() is true to help delete
RSS contexts with interface down.
Having that condition will make the driver leak VNICs
in FW whenever close() happens with active RSS contexts.
On the subsequent open(), as part of RSS context restoration,
we will end up trying to create extra VNICs for which we
did not make any reservation. FW can fail this request,
thereby making us lose active RSS contexts.
Suppose an RSS context is deleted already and we try to
process a delete request again, then the HWRM functions
will check for validity of the request and they simply
return if the resource is already freed. So, even for
delete-when-down cases, netif_running() check is not
necessary.
Remove the netif_running() condition check when deleting
an RSS context. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amd: Fix a few more NULL pointer dereference in device cleanup
I found a few more paths that cleanup fails due to a NULL version pointer
on unsupported hardware.
Add NULL checks as applicable.
(cherry picked from commit f5a05f8414fc10f307eb965f303580c7778f8dd2) |
| A vulnerability was determined in 8421bit MiniClaw up to 43905b934cf76489ab28e4d17da28ee97970f91f. Affected by this vulnerability is the function isPathInside of the file src/kernel.ts of the component executeSkillScript. Executing a manipulation can lead to path traversal. It is possible to launch the attack remotely. The exploit has been publicly disclosed and may be utilized. This product takes the approach of rolling releases to provide continious delivery. Therefore, version details for affected and updated releases are not available. This patch is called e8bd4e17e9428260f2161378356affc5ce90d6ed. It is advisable to implement a patch to correct this issue. |
| MailEnable Enterprise Premium 10.55 and earlier contains an improper authorization vulnerability in the WebAdmin mobile portal that allows attackers to bypass authentication checks by reusing AuthenticationToken cookies generated for low-privileged users. Attackers can obtain a token from the WebMail login endpoint using the PersistentLogin parameter and replay it against the WebAdmin portal to perform highly privileged administrative actions. |
| A flaw has been found in Open5GS up to 2.7.7. The affected element is the function nssf_nnrf_nsselection_handle_get_from_amf_or_vnssf of the file /src/nssf/nnssf-handler.c of the component NSSF. Executing a manipulation can lead to denial of service. The attack can be executed remotely. The exploit has been published and may be used. The project was informed of the problem early through an issue report but has not responded yet. |
| In Progress Telerik UI for WinUI versions prior to 2025 Q1 (3.0.0), a command injection attack is possible through improper neutralization of hyperlink elements. |
| Insufficient data validation in DataTransfer in Google Chrome prior to 148.0.7778.96 allowed a remote attacker who had compromised the renderer process to perform arbitrary read/write via a crafted HTML page. (Chromium security severity: Medium) |
| Crypt::PasswdMD5 versions through 1.42 for Perl generates insecure random values for salts.
The built-in rand function is predictable, and unsuitable for cryptography. |
| Use-after-free in the DOM: Networking component. This vulnerability was fixed in Firefox 150.0.2, Firefox ESR 140.10.2, Firefox ESR 115.35.2, Thunderbird 150.0.2, and Thunderbird 140.10.2. |
| A malicious module proxy can exploit a flaw in the go command's validation of module checksums to bypass checksum database validation. This vulnerability affects any user using an untrusted module proxy (GOMODPROXY) or checksum database (GOSUMDB). A malicious module proxy can serve altered versions of the Go toolchain. When selecting a different version of the Go toolchain than the currently installed toolchain (due to the GOTOOLCHAIN environment variable, or a go.work or go.mod with a toolchain line), the go command will download and execute a toolchain provided by the module proxy. A malicious module proxy can bypass checksum database validation for this downloaded toolchain. Since this vulnerability affects the security of toolchain downloads, setting GOTOOLCHAIN to a fixed version is not sufficient. You must upgrade your base Go toolchain. The go tool always validates the hash of a toolchain before executing it, so fixed versions will refuse to execute any cached, altered versions of the toolchain. The go tool trusts go.sum files to contain accurate hashes of the current module's dependencies. A malicious proxy exploiting this vulnerability to serve an altered module will have caused an incorrect hash to be recorded in the go.sum. Users who have configured a non-trusted GOPROXY can determine if they have been affected by running "rm go.sum ; go mod tidy ; go mod verify", which will revalidate all dependencies of the current module. The specific flaw in more detail: The go command consults the checksum database to validate downloaded modules, when a module is not listed in the go.sum file. It verifies that the module hash reported by the checksum database matches the hash of the downloaded module. If, however, the checksum database returns a successful response that contains no entry for the module, the go command incorrectly permitted validation to succeed. A module proxy may mirror or proxy the checksum database, in which case the go command will not connect to the checksum database directly. Checksums reported by the checksum database are cryptographically signed, so a malicious proxy cannot alter the reported checksum for a module. However, a proxy which returns an empty checksum response, or a checksum response for an unrelated module, could cause the go command to proceed as if a downloaded module has been validated. |
| In Thruk Monitoring through 2.46.3, the login field of the login form is vulnerable to reflected XSS. This vulnerability can be exploited by unauthenticated remote attackers to target users of the monitoring interface. |
| The socket connection handler in aswArPot.sys in the Avast and AVG Windows Anti Rootkit driver before 22.1 allows local attackers to execute arbitrary code in kernel mode or cause a denial of service (memory corruption and OS crash) due to a double fetch vulnerability at aswArPot+0xc4a3. |
| A Cross Site Scripting vulnerability in Alkacon OpenCms before 16 exists via updateModelGroups.jsp. |
| In the Linux kernel, the following vulnerability has been resolved:
bonding: fix type confusion in bond_setup_by_slave()
kernel BUG at net/core/skbuff.c:2306!
Oops: invalid opcode: 0000 [#1] SMP KASAN NOPTI
RIP: 0010:pskb_expand_head+0xa08/0xfe0 net/core/skbuff.c:2306
RSP: 0018:ffffc90004aff760 EFLAGS: 00010293
RAX: 0000000000000000 RBX: ffff88807e3c8780 RCX: ffffffff89593e0e
RDX: ffff88807b7c4900 RSI: ffffffff89594747 RDI: ffff88807b7c4900
RBP: 0000000000000820 R08: 0000000000000005 R09: 0000000000000000
R10: 00000000961a63e0 R11: 0000000000000000 R12: ffff88807e3c8780
R13: 00000000961a6560 R14: dffffc0000000000 R15: 00000000961a63e0
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007fe1a0ed8df0 CR3: 000000002d816000 CR4: 00000000003526f0
Call Trace:
<TASK>
ipgre_header+0xdd/0x540 net/ipv4/ip_gre.c:900
dev_hard_header include/linux/netdevice.h:3439 [inline]
packet_snd net/packet/af_packet.c:3028 [inline]
packet_sendmsg+0x3ae5/0x53c0 net/packet/af_packet.c:3108
sock_sendmsg_nosec net/socket.c:727 [inline]
__sock_sendmsg net/socket.c:742 [inline]
____sys_sendmsg+0xa54/0xc30 net/socket.c:2592
___sys_sendmsg+0x190/0x1e0 net/socket.c:2646
__sys_sendmsg+0x170/0x220 net/socket.c:2678
do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline]
do_syscall_64+0x106/0xf80 arch/x86/entry/syscall_64.c:94
entry_SYSCALL_64_after_hwframe+0x77/0x7f
RIP: 0033:0x7fe1a0e6c1a9
When a non-Ethernet device (e.g. GRE tunnel) is enslaved to a bond,
bond_setup_by_slave() directly copies the slave's header_ops to the
bond device:
bond_dev->header_ops = slave_dev->header_ops;
This causes a type confusion when dev_hard_header() is later called
on the bond device. Functions like ipgre_header(), ip6gre_header(),all use
netdev_priv(dev) to access their device-specific private data. When
called with the bond device, netdev_priv() returns the bond's private
data (struct bonding) instead of the expected type (e.g. struct
ip_tunnel), leading to garbage values being read and kernel crashes.
Fix this by introducing bond_header_ops with wrapper functions that
delegate to the active slave's header_ops using the slave's own
device. This ensures netdev_priv() in the slave's header functions
always receives the correct device.
The fix is placed in the bonding driver rather than individual device
drivers, as the root cause is bond blindly inheriting header_ops from
the slave without considering that these callbacks expect a specific
netdev_priv() layout.
The type confusion can be observed by adding a printk in
ipgre_header() and running the following commands:
ip link add dummy0 type dummy
ip addr add 10.0.0.1/24 dev dummy0
ip link set dummy0 up
ip link add gre1 type gre local 10.0.0.1
ip link add bond1 type bond mode active-backup
ip link set gre1 master bond1
ip link set gre1 up
ip link set bond1 up
ip addr add fe80::1/64 dev bond1 |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: brcmfmac: validate bsscfg indices in IF events
brcmf_fweh_handle_if_event() validates the firmware-provided interface
index before it touches drvr->iflist[], but it still uses the raw
bsscfgidx field as an array index without a matching range check.
Reject IF events whose bsscfg index does not fit in drvr->iflist[]
before indexing the interface array.
[add missing wifi prefix] |
| A flaw has been found in SourceCodester Comment System 1.0. This issue affects some unknown processing of the file post_comment.php. This manipulation of the argument Name causes sql injection. Remote exploitation of the attack is possible. The exploit has been published and may be used. |
| A weakness has been identified in CodeAstro Leave Management System 1.0. Affected is an unknown function of the file /login.php. This manipulation of the argument txt_username causes sql injection. The attack can be initiated remotely. The exploit has been made available to the public and could be used for attacks. |
