| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
RDMA/hfi1: Free RX data on late probe failure
hfi1_init_dd() allocates the shared AIP/VNIC RX support before returning.
If hfi1_init() or hfi1_register_ib_device() later fails, init_one() tears
down the device data without calling hfi1_free_rx(). This leaks netdev_rx
and its dummy netdev.
Free the RX support after IB unregistration and before postinit_cleanup(),
as done on normal device removal. |
| In the Linux kernel, the following vulnerability has been resolved:
RDMA/rxe: Avoid reprocessing the current packet after the QP enters the error state
When do_complete() finds the QP in the error state it returns
RESPST_CHK_RESOURCE. Before commit 49dc9c1f0c7e ("RDMA/rxe: Cleanup
reset state handling in rxe_resp.c") this was the flush loop:
check_resource() had an error-state branch that fetched each remaining
recv WQE and completed it with IB_WC_WR_FLUSH_ERR, without touching
the current packet. That commit removed the error-state branch from
check_resource() (draining is now done at rxe_receiver() entry) but
kept the do_complete() error-state return.
As a result, when a QP moves to the error state while a packet is
being completed - e.g. an rdma_cm disconnect racing with receive
processing - the responder state machine loops back into the request
processing chain with the already-completed packet still in hand:
check_resource() fetches a fresh recv WQE, execute()/send_data_in()
copies the same packet payload again, do_complete() posts another
IB_WC_SUCCESS CQE (qp->resp.status is still 0), and control returns
to the error-state check. The loop re-executes the same packet once
per posted recv WQE (observed: ~1000 duplicate IB_WC_SUCCESS
completions of one SEND, one per ~8us, matching the RQ occupancy)
until the RQ is exhausted, after which qp->resp.wqe is NULL and
send_data_in() dereferences it:
BUG: kernel NULL pointer dereference, address: 0000000000000014
Workqueue: rxe_wq do_work
RIP: copy_data+0x29/0x1f0
Call Trace:
send_data_in+0x25/0x50
rxe_receiver+0xf36/0x1dd0
The duplicate completions are indistinguishable from real receives to
the ULP. During an rds stress test, the message was accepted as new and
delivered the same datagram to user space hundreds of times, corrupting
the stream; any ULP that relies on RC exactly-once delivery is affected.
A live packet reaching the error-state check in do_complete() has
been executed and completed exactly once and must be consumed, not
re-processed. Return RESPST_CLEANUP for it (dequeue and free); keep
returning RESPST_CHK_RESOURCE for the pkt == NULL case. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/panthor: Fix NPD issue on partial unmap of an evicted BO
This commit fixes the NULL pointer dereference issue that would have
happened on the split of GPU mapping due to partial unmap of an evicted
BO. There is a logic to handle the partial unmap of huge pages when the
GPU mapping is split. That logic was not being completely skipped for
the VMA of an evicted BO and that resulted in a NPD possibility for the
'bo->backing.pages' pointer, which is set to NULL when pages of a
BO are released on eviction.
Following dump was seen when a partial unmap was exercised for an
evicted BO.
Unable to handle kernel paging request at virtual address 0000000000002000
Mem abort info:
ESR = 0x0000000096000004
EC = 0x25: DABT (current EL), IL = 32 bits
SET = 0, FnV = 0
EA = 0, S1PTW = 0
FSC = 0x04: level 0 translation fault
Data abort info:
ISV = 0, ISS = 0x00000004, ISS2 = 0x00000000
CM = 0, WnR = 0, TnD = 0, TagAccess = 0
GCS = 0, Overlay = 0, DirtyBit = 0, Xs = 0
user pgtable: 4k pages, 48-bit VAs, pgdp=00000008842e8000
[0000000000002000] pgd=0000000000000000, p4d=0000000000000000
Internal error: Oops: 0000000096000004 [#1] SMP
<snip>
pstate: 20000005 (nzCv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--)
pc : iova_mapped_as_huge_page+0x20/0x68 [panthor]
lr : panthor_gpuva_sm_step_remap+0x39c/0x498 [panthor]
sp : ffff800086193920
x29: ffff800086193920 x28: ffff800086193a18 x27: ffff800086193b80
x26: 0000000000400000 x25: 0000000000810000 x24: 0000000000400000
x23: ffff000808af1800 x22: 0000000000a00000 x21: ffff800086193a00
x20: ffff000806fd3f00 x19: 0000000000410000 x18: 00000000ffffffff
x17: 0000000000000000 x16: 0000000000000000 x15: ffff800083ce2d83
x14: 0000000000000000 x13: 3120646574636976 x12: 6520303030303138
x11: 2d30303030313420 x10: ffff8000836e6c80 x9 : ffff80007bfc889c
x8 : 3fffffffffffefff x7 : ffff8000836e6c80 x6 : 0000000000000000
x5 : ffff00097ef19088 x4 : 0000000000000000 x3 : 0000000000000000
x2 : 0000000000010000 x1 : 0000000000000400 x0 : 0000000000000000
Call trace:
iova_mapped_as_huge_page+0x20/0x68 [panthor] (P)
op_remap_cb.isra.0+0x70/0xb0
__drm_gpuvm_sm_unmap+0xf8/0x1c0
drm_gpuvm_sm_unmap+0x40/0x60
panthor_vm_exec_op+0xa0/0x168 [panthor]
panthor_vm_bind_exec_sync_op+0x8c/0xb8 [panthor]
panthor_ioctl_vm_bind+0xbc/0x170 [panthor]
drm_ioctl_kernel+0xc0/0x140
drm_ioctl+0x20c/0x500
__arm64_sys_ioctl+0xb4/0x118
invoke_syscall+0x5c/0x120
el0_svc_common.constprop.0+0x48/0xf8
do_el0_svc+0x28/0x40
el0_svc+0x38/0x128
el0t_64_sync_handler+0xa0/0xe8
el0t_64_sync+0x198/0x1a0
Code: 8b030021 cb020021 f940b800 d34cfc21 (f8617801)
---[ end trace 0000000000000000 ]---
v2: Fix indentation |
| In the Linux kernel, the following vulnerability has been resolved:
RDMA/core: Wait for RCU callbacks before unloading ib_core
put_gid_ndev() is queued with call_rcu() and implemented in ib_core.
Stopping the workqueues does not drain callbacks already queued, so RCU
could invoke it after the module code has been unloaded.
synchronize_rcu() does not wait for callbacks. Wait for them after all
producers have stopped. |
| In the Linux kernel, the following vulnerability has been resolved:
usb: ljca: bound bank_num in ljca_enumerate_gpio()
ljca_enumerate_gpio() reads desc->bank_num from the device and loops
valid_pin[i] = get_unaligned_le32(...) for i < bank_num. valid_pin[]
holds only LJCA_MAX_GPIO_NUM / 32 = 2 entries.
Two checks run before the loop. The reply length must match
struct_size(desc, bank_desc, bank_num). The product
pins_per_bank * bank_num must not exceed LJCA_MAX_GPIO_NUM. Neither one
bounds bank_num against the size of valid_pin[]. The reply is capped at
LJCA_MAX_PAYLOAD_SIZE (60) bytes, so the struct_size check limits
bank_num to 9. A device that reports bank_num 9 with pins_per_bank 7
still passes both checks. gpio_num is 63 and the reply is 56 bytes. The
loop then writes nine u32 into the two entry array and overruns
valid_pin[] on the stack.
A broken or malicious LJCA device can therefore overflow the stack.
Reject a bank_num that does not fit valid_pin[]. |
| In the Linux kernel, the following vulnerability has been resolved:
usb: gadget: configfs: fix out-of-bounds read of qw_sign
os_desc_qw_sign_show() passes OS_STRING_QW_SIGN_LEN as the input
length to utf16s_to_utf8s(), but that argument counts UTF-16 code
units while OS_STRING_QW_SIGN_LEN (14) is the byte size of qw_sign[].
The array holds only OS_STRING_QW_SIGN_LEN / 2 (7) code units, so the
conversion reads up to 7 units (14 bytes) past the end of qw_sign[]
into the following members of struct gadget_info when the stored
signature fills the array without a NUL terminator, exposing those
bytes through the configfs attribute.
The store path halves the count for its input bound but passes the
full byte count as the utf8s_to_utf16s() output limit; use the
destination code-unit count in both directions. |
| In the Linux kernel, the following vulnerability has been resolved:
serial: qcom-geni: do not advance stale DMA completions
The qcom GENI serial DMA TX completion path advances the transmit fifo by
the number of bytes recorded in port->tx_remaining.
If uart_flush_buffer() runs after the hardware has completed a DMA
transfer but before the DMA completion interrupt has been handled, the
serial core resets the transmit fifo while port->tx_remaining still
describes the old DMA transfer.
A previous fix avoided advancing an empty fifo by checking that the fifo
length is at least tx_remaining. That still does not distinguish the old
DMA payload from new bytes written after the flush. If userspace writes
new data before the stale DMA completion interrupt is handled, the fifo
can again contain at least tx_remaining bytes and the stale completion
can advance and discard those new bytes.
Mark an in-flight DMA transfer stale when the transmit fifo is flushed.
The later completion still unprepares the original DMA mapping using the
saved length, but it no longer advances the transmit fifo. |
| In the Linux kernel, the following vulnerability has been resolved:
remoteproc: qcom_q6v5_adsp: Fix reference leak for device node
When calling of_parse_phandle_with_args(), the caller is responsible
to call of_node_put() to release the reference of device node.
In adsp_map_carveout, it does not release the reference. |
| In the Linux kernel, the following vulnerability has been resolved:
platform/x86: dell-wmi-base: Fix handling of ultra performance key
The commit message of commit 5fbd827eb9c2 ("platform/x86: dell-wmi: Recognise or support new switches")
states that the ultra performance key contains additional data
after the type and code fields. The event data passed to
dell_wmi_process_key() is already parsed, so "buffer" already
starts after those two fields.
Use the correct index for accessing the first data field to avoid
a potential buffer overread. |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: Reject arena frees below the arena base
bpf_arena_free_pages() accepts scalar arena addresses. The runtime
masks the address to the low 32 bits and reconstructs a full user
address from the arena base before returning the range to the arena
free tree.
When the scalar value is below the low 32 bits of the arena base,
full_uaddr falls below user_vm_start. The existing upper-end clipping
then turns this into an out-of-range free-tree offset. A later
allocation can reuse that offset and return an address below the arena
mapping.
Reject such frees before computing the clipped range. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/v3d: Associate BOs with every job that accesses them
A submission can expand into a chain of jobs (e.g. bin + render + cache
clean). Implicit synchronization in v3d_submit_lock_reservations() is gated
on each job's bo[], but the BO list was only ever attached to the last job
of the chain. When that last job is a trailing CACHE_CLEAN job, the job
that actually consumes the BOs (that is, a RENDER or CSD job) was left with
bo_count == 0 and picked up no implicit dependencies. It could therefore
be dispatched to the hardware and read a BO while another context was still
writing it, leading to data corruption.
Attach the BOs to the job that consumes them, so (1) it acquires the
correct implicit dependencies during reservation locking and (2) they are
kept mapped until the end of the submission. Give it references to all
consuming job's BOs through v3d_job_reference_bos() instead of looking the
handles up a second time; that avoids a redundant lookup and guarantees
both jobs reference the exact same objects.
As the CACHE_CLEAN job now carries a BO array as well, add a per-job
`has_implicit_dep` flag so that only the consuming jobs take implicit
dependencies. The CACHE_CLEAN job (a global flush) and the BIN job (binning
waiting on another context is not a realistic scenario) are excluded. |
| In the Linux kernel, the following vulnerability has been resolved:
mtd: mtdswap: Avoid freeing registered blktrans device twice
In mtdswap_add_mtd(), debugfs setup failure after successful blktrans
registration can free mbd_dev twice.
add_mtd_blktrans_dev() initializes the blktrans device reference and
publishes the disk. Once that succeeds, del_mtd_blktrans_dev() tears the
disk down and drops the blktrans reference; when that reference reaches
zero, blktrans_dev_release() frees the mtd_blktrans_dev.
The debugfs failure path called del_mtd_blktrans_dev(mbd_dev), then fell
through the common cleanup label and called kfree(mbd_dev) again. Clear
the local pointer after deregistration so the common cleanup can still
release the mtdswap state without freeing the blktrans object twice.
This issue was found by a static analysis checker and confirmed by
manual source review. |
| In the Linux kernel, the following vulnerability has been resolved:
speakup: keyhelp: guard letter_offsets possible out-of-range indexing
help_init() builds letter_offsets[] by using the first byte of each
function name as an index via `(start & 31) - 1`. If function_names are
overridden from sysfs (root) with a name starting outside [a–z], the
index underflows or exceeds the array, leading to OOB write.
Function names can be overridden with the following commands as root:
modprobe speakup_soft
echo "0 _bad" > /sys/accessibility/speakup/i18n/function_names
# then press Insert+2 on /dev/tty
This fix checks the first letter in help_init(), and if it is not in the
[a–z] range the function returns an error to the caller. Eventually this
error is propagated to drivers/accessibility/speakup/main.c:2217, which
causes a bleep sound. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/msm: Only fini scheduler after successful init
msm_ringbuffer_new() destroys a partially initialized ring through
msm_ringbuffer_destroy() when an allocation or scheduler setup step
fails.
If drm_sched_init() fails before it finishes initializing the scheduler,
the failure path still calls drm_sched_fini(). That teardown path assumes
the scheduler work items, lists, and workqueue state were initialized.
Track successful scheduler initialization and call drm_sched_fini() only
after drm_sched_init() returned 0.
This issue was found by a static analysis checker and confirmed by
manual source review.
Patchwork: https://patchwork.freedesktop.org/patch/738905/ |
| In the Linux kernel, the following vulnerability has been resolved:
drm/msm: Fix task_struct reference leak in recover_worker
get_pid_task() increments the task reference count, but the
corresponding put_task_struct() was missing in the else branch,
leaking a reference on every GPU hang recovery.
Patchwork: https://patchwork.freedesktop.org/patch/730662/ |
| In the Linux kernel, the following vulnerability has been resolved:
x86/mm/pat: Take cpa_lock around large-page collapse
Loading and unloading modules concurrently on several CPUs on a KASAN
build, with a short delay injected at the CPA page-table lookup to
widen the window, faults within minutes:
BUG: KASAN: use-after-free in __change_page_attr+0x7cc/0x7e0
Write of size 8 at addr ffff888181139718 by task modprobe
...
The buggy address belongs to the physical page:
pfn:0x181139 ... page_type: f2(table)
cpa_collapse_large_pages() rebuilds a leaf PMD from its 4K PTEs and
frees the old PTE-table pages, while __change_page_attr() fetches a
PTE pointer from a lockless lookup_address_in_pgd_attr() and writes
it with set_pte_atomic() only later. When module text is served from
a shared large ROX mapping the two run on the same PMD:
CPU A (module load) CPU B (module finalize)
------------------- -----------------------
execmem_make_temp_rw
set_memory_nx
__change_page_attr
split 2M -> 4K table P
kpte = &P[i] (lockless)
execmem_restore_rox
set_memory_rox (CPA_COLLAPSE)
cpa_collapse_large_pages
rebuild leaf PMD
flush_tlb_all
pagetable_free(P)
set_pte_atomic(kpte, ...)
-> writes into freed P
P is a page-table page (page_type: table), reused at once, so the
write corrupts whatever got the page next: a bad-pte or bad-page
splat, or a fatal fault once P has been turned into read-only text.
The flush_tlb_all() before the free does not close this: its IPI only
serializes against page-table walkers that run with interrupts off
(e.g. GUP-fast); the walk in __change_page_attr() runs with interrupts
on, so nothing stops it from holding a stale pointer into P.
Serialize the collapse - the PMD rebuild, TLB flush and PTE-table
free - under cpa_lock, the same lock __change_page_attr() now takes
unconditionally since commit ("x86/mm/pat: stop gating cpa_lock on
debug_pagealloc_enabled()"), so a concurrent walker can no longer
hold a pointer into a table the collapse is about to free. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amd/display: Fix DM I2C teardown race
DM I2C adapters can remain visible to userspace while DM teardown is
already in progress. A concurrent i2c-dev transfer may then enter
amdgpu_dm_i2c_xfer() after the backing DM state has been torn down,
leading to a NULL pointer dereference.
Create a devres group around the DM I2C adapter lifetime and release it
at the start of dm_hw_fini(), before HPD, IRQ, and DM state are torn
down. This removes the I2C adapters first and waits for in-flight users
to drain before the structures used by amdgpu_dm_i2c_xfer() disappear.
This fixes a teardown ordering race seen during device removal:
BUG: kernel NULL pointer dereference
RIP: amdgpu_dm_i2c_xfer+0x122/0x1c0 [amdgpu]
Call Trace:
__i2c_transfer
i2c_transfer
i2cdev_ioctl_rdwr |
| In the Linux kernel, the following vulnerability has been resolved:
ACPI: RISC-V: Check acpi_get_handle() status in riscv_acpi_add_prt_dep()
In riscv_acpi_add_prt_dep(), the acpi_get_handle() call can fail which
would leave link_handle uninitialized.
Fix it by checking the acpi_get_handle() return status and skip the entry
if it fails. |
| In the Linux kernel, the following vulnerability has been resolved:
dax/fsdev: clear vmemmap_shift when binding static pgmap
Clear pgmap->vmemmap_shift for static DAX devices. When rebinding a static
device from device_dax (which may set vmemmap_shift based on alignment) to
fsdev_dax, the stale vmemmap_shift persists on the shared pgmap. Explicitly
zero it before devm_memremap_pages() so the vmemmap is built for order-0
folios as fsdev requires. |
| In the Linux kernel, the following vulnerability has been resolved:
firmware: arm_scmi: Fix transport device teardown lookup
SCMI transport devices are deliberately excluded from normal SCMI bus
matching so protocol drivers cannot bind to the internal transport
children. However, scmi_device_destroy() uses the same protocol/name
lookup to find devices that must be unregistered during channel teardown.
Split the match helper so driver matching still skips transport devices,
while explicit child lookup can find them for teardown. Use a shared
transport-device name prefix macro for both matching and name generation.
Since transport-device names are derived from direction and protocol ID,
reject duplicate protocol channel setup before creating or finding a
transport device. This prevents malformed firmware with duplicate
protocol child nodes from reusing an existing transport device and then
destroying it when the duplicate IDR insertion fails. |
