| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
scsi: message: mptlan: Fix use after free bug in mptlan_remove() due to race condition
mptlan_probe() calls mpt_register_lan_device() which initializes the
&priv->post_buckets_task workqueue. A call to
mpt_lan_wake_post_buckets_task() will subsequently start the work.
During driver unload in mptlan_remove() the following race may occur:
CPU0 CPU1
|mpt_lan_post_receive_buckets_work()
mptlan_remove() |
free_netdev() |
kfree(dev); |
|
| dev->mtu
| //use
Fix this by finishing the work prior to cleaning up in mptlan_remove().
[mkp: we really should remove mptlan instead of attempting to fix it] |
| In the Linux kernel, the following vulnerability has been resolved:
ext4: fix use-after-free in ext4_orphan_cleanup
I caught a issue as follows:
==================================================================
BUG: KASAN: use-after-free in __list_add_valid+0x28/0x1a0
Read of size 8 at addr ffff88814b13f378 by task mount/710
CPU: 1 PID: 710 Comm: mount Not tainted 6.1.0-rc3-next #370
Call Trace:
<TASK>
dump_stack_lvl+0x73/0x9f
print_report+0x25d/0x759
kasan_report+0xc0/0x120
__asan_load8+0x99/0x140
__list_add_valid+0x28/0x1a0
ext4_orphan_cleanup+0x564/0x9d0 [ext4]
__ext4_fill_super+0x48e2/0x5300 [ext4]
ext4_fill_super+0x19f/0x3a0 [ext4]
get_tree_bdev+0x27b/0x450
ext4_get_tree+0x19/0x30 [ext4]
vfs_get_tree+0x49/0x150
path_mount+0xaae/0x1350
do_mount+0xe2/0x110
__x64_sys_mount+0xf0/0x190
do_syscall_64+0x35/0x80
entry_SYSCALL_64_after_hwframe+0x63/0xcd
</TASK>
[...]
==================================================================
Above issue may happen as follows:
-------------------------------------
ext4_fill_super
ext4_orphan_cleanup
--- loop1: assume last_orphan is 12 ---
list_add(&EXT4_I(inode)->i_orphan, &EXT4_SB(sb)->s_orphan)
ext4_truncate --> return 0
ext4_inode_attach_jinode --> return -ENOMEM
iput(inode) --> free inode<12>
--- loop2: last_orphan is still 12 ---
list_add(&EXT4_I(inode)->i_orphan, &EXT4_SB(sb)->s_orphan);
// use inode<12> and trigger UAF
To solve this issue, we need to propagate the return value of
ext4_inode_attach_jinode() appropriately. |
| In the Linux kernel, the following vulnerability has been resolved:
powerpc/powernv/sriov: perform null check on iov before dereferencing iov
Currently pointer iov is being dereferenced before the null check of iov
which can lead to null pointer dereference errors. Fix this by moving the
iov null check before the dereferencing.
Detected using cppcheck static analysis:
linux/arch/powerpc/platforms/powernv/pci-sriov.c:597:12: warning: Either
the condition '!iov' is redundant or there is possible null pointer
dereference: iov. [nullPointerRedundantCheck]
num_vfs = iov->num_vfs;
^ |
| In the Linux kernel, the following vulnerability has been resolved:
RDMA/siw: Fix QP destroy to wait for all references dropped.
Delay QP destroy completion until all siw references to QP are
dropped. The calling RDMA core will free QP structure after
successful return from siw_qp_destroy() call, so siw must not
hold any remaining reference to the QP upon return.
A use-after-free was encountered in xfstest generic/460, while
testing NFSoRDMA. Here, after a TCP connection drop by peer,
the triggered siw_cm_work_handler got delayed until after
QP destroy call, referencing a QP which has already freed. |
| In the Linux kernel, the following vulnerability has been resolved:
riscv: mm: add missing memcpy in kasan_init
Hi Atish,
It seems that the panic is due to the missing memcpy during kasan_init.
Could you please check whether this patch is helpful?
When doing kasan_populate, the new allocated base_pud/base_p4d should
contain kasan_early_shadow_{pud, p4d}'s content. Add the missing memcpy
to avoid page fault when read/write kasan shadow region.
Tested on:
- qemu with sv57 and CONFIG_KASAN on.
- qemu with sv48 and CONFIG_KASAN on. |
| In the Linux kernel, the following vulnerability has been resolved:
nfc: pn533: Clear nfc_target before being used
Fix a slab-out-of-bounds read that occurs in nla_put() called from
nfc_genl_send_target() when target->sensb_res_len, which is duplicated
from an nfc_target in pn533, is too large as the nfc_target is not
properly initialized and retains garbage values. Clear nfc_targets with
memset() before they are used.
Found by a modified version of syzkaller.
BUG: KASAN: slab-out-of-bounds in nla_put
Call Trace:
memcpy
nla_put
nfc_genl_dump_targets
genl_lock_dumpit
netlink_dump
__netlink_dump_start
genl_family_rcv_msg_dumpit
genl_rcv_msg
netlink_rcv_skb
genl_rcv
netlink_unicast
netlink_sendmsg
sock_sendmsg
____sys_sendmsg
___sys_sendmsg
__sys_sendmsg
do_syscall_64 |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: Fix panic due to wrong pageattr of im->image
In the scenario where livepatch and kretfunc coexist, the pageattr of
im->image is rox after arch_prepare_bpf_trampoline in
bpf_trampoline_update, and then modify_fentry or register_fentry returns
-EAGAIN from bpf_tramp_ftrace_ops_func, the BPF_TRAMP_F_ORIG_STACK flag
will be configured, and arch_prepare_bpf_trampoline will be re-executed.
At this time, because the pageattr of im->image is rox,
arch_prepare_bpf_trampoline will read and write im->image, which causes
a fault. as follows:
insmod livepatch-sample.ko # samples/livepatch/livepatch-sample.c
bpftrace -e 'kretfunc:cmdline_proc_show {}'
BUG: unable to handle page fault for address: ffffffffa0206000
PGD 322d067 P4D 322d067 PUD 322e063 PMD 1297e067 PTE d428061
Oops: 0003 [#1] PREEMPT SMP PTI
CPU: 2 PID: 270 Comm: bpftrace Tainted: G E K 6.1.0 #5
RIP: 0010:arch_prepare_bpf_trampoline+0xed/0x8c0
RSP: 0018:ffffc90001083ad8 EFLAGS: 00010202
RAX: ffffffffa0206000 RBX: 0000000000000020 RCX: 0000000000000000
RDX: ffffffffa0206001 RSI: ffffffffa0206000 RDI: 0000000000000030
RBP: ffffc90001083b70 R08: 0000000000000066 R09: ffff88800f51b400
R10: 000000002e72c6e5 R11: 00000000d0a15080 R12: ffff8880110a68c8
R13: 0000000000000000 R14: ffff88800f51b400 R15: ffffffff814fec10
FS: 00007f87bc0dc780(0000) GS:ffff88803e600000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: ffffffffa0206000 CR3: 0000000010b70000 CR4: 00000000000006e0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
<TASK>
bpf_trampoline_update+0x25a/0x6b0
__bpf_trampoline_link_prog+0x101/0x240
bpf_trampoline_link_prog+0x2d/0x50
bpf_tracing_prog_attach+0x24c/0x530
bpf_raw_tp_link_attach+0x73/0x1d0
__sys_bpf+0x100e/0x2570
__x64_sys_bpf+0x1c/0x30
do_syscall_64+0x5b/0x80
entry_SYSCALL_64_after_hwframe+0x63/0xcd
With this patch, when modify_fentry or register_fentry returns -EAGAIN
from bpf_tramp_ftrace_ops_func, the pageattr of im->image will be reset
to nx+rw. |
| In the Linux kernel, the following vulnerability has been resolved:
uio: uio_dmem_genirq: Fix missing unlock in irq configuration
Commit b74351287d4b ("uio: fix a sleep-in-atomic-context bug in
uio_dmem_genirq_irqcontrol()") started calling disable_irq() without
holding the spinlock because it can sleep. However, that fix introduced
another bug: if interrupt is already disabled and a new disable request
comes in, then the spinlock is not unlocked:
root@localhost:~# printf '\x00\x00\x00\x00' > /dev/uio0
root@localhost:~# printf '\x00\x00\x00\x00' > /dev/uio0
root@localhost:~# [ 14.851538] BUG: scheduling while atomic: bash/223/0x00000002
[ 14.851991] Modules linked in: uio_dmem_genirq uio myfpga(OE) bochs drm_vram_helper drm_ttm_helper ttm drm_kms_helper drm snd_pcm ppdev joydev psmouse snd_timer snd e1000fb_sys_fops syscopyarea parport sysfillrect soundcore sysimgblt input_leds pcspkr i2c_piix4 serio_raw floppy evbug qemu_fw_cfg mac_hid pata_acpi ip_tables x_tables autofs4 [last unloaded: parport_pc]
[ 14.854206] CPU: 0 PID: 223 Comm: bash Tainted: G OE 6.0.0-rc7 #21
[ 14.854786] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.16.0-0-gd239552ce722-prebuilt.qemu.org 04/01/2014
[ 14.855664] Call Trace:
[ 14.855861] <TASK>
[ 14.856025] dump_stack_lvl+0x4d/0x67
[ 14.856325] dump_stack+0x14/0x1a
[ 14.856583] __schedule_bug.cold+0x4b/0x5c
[ 14.856915] __schedule+0xe81/0x13d0
[ 14.857199] ? idr_find+0x13/0x20
[ 14.857456] ? get_work_pool+0x2d/0x50
[ 14.857756] ? __flush_work+0x233/0x280
[ 14.858068] ? __schedule+0xa95/0x13d0
[ 14.858307] ? idr_find+0x13/0x20
[ 14.858519] ? get_work_pool+0x2d/0x50
[ 14.858798] schedule+0x6c/0x100
[ 14.859009] schedule_hrtimeout_range_clock+0xff/0x110
[ 14.859335] ? tty_write_room+0x1f/0x30
[ 14.859598] ? n_tty_poll+0x1ec/0x220
[ 14.859830] ? tty_ldisc_deref+0x1a/0x20
[ 14.860090] schedule_hrtimeout_range+0x17/0x20
[ 14.860373] do_select+0x596/0x840
[ 14.860627] ? __kernel_text_address+0x16/0x50
[ 14.860954] ? poll_freewait+0xb0/0xb0
[ 14.861235] ? poll_freewait+0xb0/0xb0
[ 14.861517] ? rpm_resume+0x49d/0x780
[ 14.861798] ? common_interrupt+0x59/0xa0
[ 14.862127] ? asm_common_interrupt+0x2b/0x40
[ 14.862511] ? __uart_start.isra.0+0x61/0x70
[ 14.862902] ? __check_object_size+0x61/0x280
[ 14.863255] core_sys_select+0x1c6/0x400
[ 14.863575] ? vfs_write+0x1c9/0x3d0
[ 14.863853] ? vfs_write+0x1c9/0x3d0
[ 14.864121] ? _copy_from_user+0x45/0x70
[ 14.864526] do_pselect.constprop.0+0xb3/0xf0
[ 14.864893] ? do_syscall_64+0x6d/0x90
[ 14.865228] ? do_syscall_64+0x6d/0x90
[ 14.865556] __x64_sys_pselect6+0x76/0xa0
[ 14.865906] do_syscall_64+0x60/0x90
[ 14.866214] ? syscall_exit_to_user_mode+0x2a/0x50
[ 14.866640] ? do_syscall_64+0x6d/0x90
[ 14.866972] ? do_syscall_64+0x6d/0x90
[ 14.867286] ? do_syscall_64+0x6d/0x90
[ 14.867626] entry_SYSCALL_64_after_hwframe+0x63/0xcd
[...] stripped
[ 14.872959] </TASK>
('myfpga' is a simple 'uio_dmem_genirq' driver I wrote to test this)
The implementation of "uio_dmem_genirq" was based on "uio_pdrv_genirq" and
it is used in a similar manner to the "uio_pdrv_genirq" driver with respect
to interrupt configuration and handling. At the time "uio_dmem_genirq" was
introduced, both had the same implementation of the 'uio_info' handlers
irqcontrol() and handler(). Then commit 34cb27528398 ("UIO: Fix concurrency
issue"), which was only applied to "uio_pdrv_genirq", ended up making them
a little different. That commit, among other things, changed disable_irq()
to disable_irq_nosync() in the implementation of irqcontrol(). The
motivation there was to avoid a deadlock between irqcontrol() and
handler(), since it added a spinlock in the irq handler, and disable_irq()
waits for the completion of the irq handler.
By changing disable_irq() to disable_irq_nosync() in irqcontrol(), we also
avoid the sleeping-whil
---truncated--- |
| In the Linux kernel, the following vulnerability has been resolved:
EDAC/i10nm: fix refcount leak in pci_get_dev_wrapper()
As the comment of pci_get_domain_bus_and_slot() says, it returns
a PCI device with refcount incremented, so it doesn't need to
call an extra pci_dev_get() in pci_get_dev_wrapper(), and the PCI
device needs to be put in the error path. |
| In the Linux kernel, the following vulnerability has been resolved:
HSI: omap_ssi: Fix refcount leak in ssi_probe
When returning or breaking early from a
for_each_available_child_of_node() loop, we need to explicitly call
of_node_put() on the child node to possibly release the node. |
| In the Linux kernel, the following vulnerability has been resolved:
remoteproc: sysmon: fix memory leak in qcom_add_sysmon_subdev()
The kfree() should be called when of_irq_get_byname() fails or
devm_request_threaded_irq() fails in qcom_add_sysmon_subdev(),
otherwise there will be a memory leak, so add kfree() to fix it. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/panel/panel-sitronix-st7701: Remove panel on DSI attach failure
In case mipi_dsi_attach() fails, call drm_panel_remove() to
avoid memory leak. |
| In the Linux kernel, the following vulnerability has been resolved:
crypto: starfive - Correctly handle return of sg_nents_for_len
The return value of sg_nents_for_len was assigned to an unsigned long
in starfive_hash_digest, causing negative error codes to be converted
to large positive integers.
Add error checking for sg_nents_for_len and return immediately on
failure to prevent potential buffer overflows. |
| In the Linux kernel, the following vulnerability has been resolved:
rpmsg: glink: Add check for kstrdup
Add check for the return value of kstrdup() and return the error
if it fails in order to avoid NULL pointer dereference. |
| In the Linux kernel, the following vulnerability has been resolved:
ipmi:ssif: Fix a memory leak when scanning for an adapter
The adapter scan ssif_info_find() sets info->adapter_name if the adapter
info came from SMBIOS, as it's not set in that case. However, this
function can be called more than once, and it will leak the adapter name
if it had already been set. So check for NULL before setting it. |
| Kaspersky has fixed a security issue in Kaspersky Endpoint Security for Linux (any version with anti-virus databases prior to 18.11.2025), Kaspersky Industrial CyberSecurity for Linux Nodes (any version with anti-virus databases prior to 18.11.2025), and Kaspersky Endpoint Security for Mac (12.0.0.325, 12.1.0.553, and 12.2.0.694 with anti-virus databases prior to 18.11.2025) that could have allowed a reflected XSS attack to be carried out by an attacker using phishing techniques. |
| In the Linux kernel, the following vulnerability has been resolved:
misc: ocxl: fix possible name leak in ocxl_file_register_afu()
If device_register() returns error in ocxl_file_register_afu(),
the name allocated by dev_set_name() need be freed. As comment
of device_register() says, it should use put_device() to give
up the reference in the error path. So fix this by calling
put_device(), then the name can be freed in kobject_cleanup(),
and info is freed in info_release(). |
| In the Linux kernel, the following vulnerability has been resolved:
drm/tegra: Add call to put_pid()
Add a call to put_pid() corresponding to get_task_pid().
host1x_memory_context_alloc() does not take ownership of the PID so we
need to free it here to avoid leaking.
[mperttunen@nvidia.com: reword commit message] |
| In the Linux kernel, the following vulnerability has been resolved:
net: macb: fix a memory corruption in extended buffer descriptor mode
For quite some time we were chasing a bug which looked like a sudden
permanent failure of networking and mmc on some of our devices.
The bug was very sensitive to any software changes and even more to
any kernel debug options.
Finally we got a setup where the problem was reproducible with
CONFIG_DMA_API_DEBUG=y and it revealed the issue with the rx dma:
[ 16.992082] ------------[ cut here ]------------
[ 16.996779] DMA-API: macb ff0b0000.ethernet: device driver tries to free DMA memory it has not allocated [device address=0x0000000875e3e244] [size=1536 bytes]
[ 17.011049] WARNING: CPU: 0 PID: 85 at kernel/dma/debug.c:1011 check_unmap+0x6a0/0x900
[ 17.018977] Modules linked in: xxxxx
[ 17.038823] CPU: 0 PID: 85 Comm: irq/55-8000f000 Not tainted 5.4.0 #28
[ 17.045345] Hardware name: xxxxx
[ 17.049528] pstate: 60000005 (nZCv daif -PAN -UAO)
[ 17.054322] pc : check_unmap+0x6a0/0x900
[ 17.058243] lr : check_unmap+0x6a0/0x900
[ 17.062163] sp : ffffffc010003c40
[ 17.065470] x29: ffffffc010003c40 x28: 000000004000c03c
[ 17.070783] x27: ffffffc010da7048 x26: ffffff8878e38800
[ 17.076095] x25: ffffff8879d22810 x24: ffffffc010003cc8
[ 17.081407] x23: 0000000000000000 x22: ffffffc010a08750
[ 17.086719] x21: ffffff8878e3c7c0 x20: ffffffc010acb000
[ 17.092032] x19: 0000000875e3e244 x18: 0000000000000010
[ 17.097343] x17: 0000000000000000 x16: 0000000000000000
[ 17.102647] x15: ffffff8879e4a988 x14: 0720072007200720
[ 17.107959] x13: 0720072007200720 x12: 0720072007200720
[ 17.113261] x11: 0720072007200720 x10: 0720072007200720
[ 17.118565] x9 : 0720072007200720 x8 : 000000000000022d
[ 17.123869] x7 : 0000000000000015 x6 : 0000000000000098
[ 17.129173] x5 : 0000000000000000 x4 : 0000000000000000
[ 17.134475] x3 : 00000000ffffffff x2 : ffffffc010a1d370
[ 17.139778] x1 : b420c9d75d27bb00 x0 : 0000000000000000
[ 17.145082] Call trace:
[ 17.147524] check_unmap+0x6a0/0x900
[ 17.151091] debug_dma_unmap_page+0x88/0x90
[ 17.155266] gem_rx+0x114/0x2f0
[ 17.158396] macb_poll+0x58/0x100
[ 17.161705] net_rx_action+0x118/0x400
[ 17.165445] __do_softirq+0x138/0x36c
[ 17.169100] irq_exit+0x98/0xc0
[ 17.172234] __handle_domain_irq+0x64/0xc0
[ 17.176320] gic_handle_irq+0x5c/0xc0
[ 17.179974] el1_irq+0xb8/0x140
[ 17.183109] xiic_process+0x5c/0xe30
[ 17.186677] irq_thread_fn+0x28/0x90
[ 17.190244] irq_thread+0x208/0x2a0
[ 17.193724] kthread+0x130/0x140
[ 17.196945] ret_from_fork+0x10/0x20
[ 17.200510] ---[ end trace 7240980785f81d6f ]---
[ 237.021490] ------------[ cut here ]------------
[ 237.026129] DMA-API: exceeded 7 overlapping mappings of cacheline 0x0000000021d79e7b
[ 237.033886] WARNING: CPU: 0 PID: 0 at kernel/dma/debug.c:499 add_dma_entry+0x214/0x240
[ 237.041802] Modules linked in: xxxxx
[ 237.061637] CPU: 0 PID: 0 Comm: swapper/0 Tainted: G W 5.4.0 #28
[ 237.068941] Hardware name: xxxxx
[ 237.073116] pstate: 80000085 (Nzcv daIf -PAN -UAO)
[ 237.077900] pc : add_dma_entry+0x214/0x240
[ 237.081986] lr : add_dma_entry+0x214/0x240
[ 237.086072] sp : ffffffc010003c30
[ 237.089379] x29: ffffffc010003c30 x28: ffffff8878a0be00
[ 237.094683] x27: 0000000000000180 x26: ffffff8878e387c0
[ 237.099987] x25: 0000000000000002 x24: 0000000000000000
[ 237.105290] x23: 000000000000003b x22: ffffffc010a0fa00
[ 237.110594] x21: 0000000021d79e7b x20: ffffffc010abe600
[ 237.115897] x19: 00000000ffffffef x18: 0000000000000010
[ 237.121201] x17: 0000000000000000 x16: 0000000000000000
[ 237.126504] x15: ffffffc010a0fdc8 x14: 0720072007200720
[ 237.131807] x13: 0720072007200720 x12: 0720072007200720
[ 237.137111] x11: 0720072007200720 x10: 0720072007200720
[ 237.142415] x9 : 0720072007200720 x8 : 0000000000000259
[ 237.147718] x7 : 0000000000000001 x6 : 0000000000000000
[ 237.15302
---truncated--- |
| In the Linux kernel, the following vulnerability has been resolved:
net/mlx5: fix potential memory leak in mlx5e_init_rep_rx
The memory pointed to by the priv->rx_res pointer is not freed in the error
path of mlx5e_init_rep_rx, which can lead to a memory leak. Fix by freeing
the memory in the error path, thereby making the error path identical to
mlx5e_cleanup_rep_rx(). |
