| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
s390/cio: use generic driver_override infrastructure
When a driver is probed through __driver_attach(), the bus' match()
callback is called without the device lock held, thus accessing the
driver_override field without a lock, which can cause a UAF.
Fix this by using the driver-core driver_override infrastructure taking
care of proper locking internally.
Note that calling match() from __driver_attach() without the device lock
held is intentional. [1] |
| Appsmith is a platform to build admin panels, internal tools, and dashboards. Prior to 1.99, the POST /api/v1/admin/send-test-email endpoint accepts attacker-controlled smtpHost and smtpPort values and establishes a raw JavaMail TCP connection without any IP validation. This completely bypasses WebClientUtils.IP_CHECK_FILTER, which only applies to Spring WebClient HTTP requests. Additionally, the raw MailException.getMessage() is returned verbatim in the API error response, enabling error-based internal port scanning and service banner enumeration. This vulnerability is fixed in 1.99. |
| Appsmith is a platform to build admin panels, internal tools, and dashboards. Prior to 2.1, the bundled Caddy reverse-proxy's admin API — which has no authentication by default — is bound on 0.0.0.0:2019 inside the container. While this listener is not directly published to the host by docker-compose.yml, it is reachable from the Appsmith server process itself or a SSRF vulnerability. An authenticated low-privileged user can therefore drive the SSRF to issue POST /load (or any other admin-API call) against http://0.0.0.0:2019/, fully replacing the live Caddy configuration and taking over the reverse proxy. This vulnerability is fixed in 2.1. |
| ATEN Unizon doCryptoHugeFileToFile Improper Verification of Cryptographic Signature Remote Code Execution Vulnerability. This vulnerability allows remote attackers to execute arbitrary code on affected installations of ATEN Unizon. Authentication is required to exploit this vulnerability.
The specific flaw exists within the updateWar method. The issue results from an incorrect implementation of cryptographic signature verification. An attacker can leverage this vulnerability to execute code in the context of SYSTEM. Was ZDI-CAN-28590. |
| ATEN Unizon ImportDeviceList Directory Traversal Remote Code Execution Vulnerability. This vulnerability allows remote attackers to execute arbitrary code on affected installations of ATEN Unizon. Authentication is required to exploit this vulnerability.
The specific flaw exists within the ImportDeviceList method. The issue results from the lack of proper validation of a user-supplied path prior to using it in file operations. An attacker can leverage this vulnerability to execute code in the context of SYSTEM. Was ZDI-CAN-28579. |
| ATEN Unizon restoreDB Directory Traversal Remote Code Execution Vulnerability. This vulnerability allows remote attackers to execute arbitrary code on affected installations of ATEN Unizon. Authentication is required to exploit this vulnerability.
The specific flaw exists within the restoreDB method. The issue results from the lack of proper validation of a user-supplied path prior to using it in file operations. An attacker can leverage this vulnerability to execute code in the context of SYSTEM. Was ZDI-CAN-28578. |
| ATEN Unizon writeFileToHttpServletResponse Directory Traversal Information Disclosure Vulnerability. This vulnerability allows remote attackers to disclose sensitive information on affected installations of ATEN Unizon. Authentication is not required to exploit this vulnerability.
The specific flaw exists within the writeFileToHttpServletResponse method. The issue results from the lack of proper validation of a user-supplied path prior to using it in file operations. An attacker can leverage this vulnerability to disclose information in the context of SYSTEM. Was ZDI-CAN-28505. |
| ATEN Unizon uploadSSL Directory Traversal Arbitrary File Deletion Vulnerability. This vulnerability allows remote attackers to delete arbitrary files on affected installations of ATEN Unizon. Authentication is required to exploit this vulnerability.
The specific flaw exists within the uploadSSL method. The issue results from the lack of proper validation of a user-supplied path prior to using it in file operations. An attacker can leverage this vulnerability to delete files or create a denial-of-service condition on the system. Was ZDI-CAN-28503. |
| ATEN Unizon updateLicense Directory Traversal Arbitrary File Deletion Vulnerability. This vulnerability allows remote attackers to delete arbitrary files on affected installations of ATEN Unizon. Authentication is required to exploit this vulnerability.
The specific flaw exists within the updateLicense method. The issue results from the lack of proper validation of a user-supplied path prior to using it in file operations. An attacker can leverage this vulnerability to delete files or create a denial-of-service condition on the system. Was ZDI-CAN-28502. |
| Appsmith is a platform to build admin panels, internal tools, and dashboards. Prior to 2.1, the outbound HTTP host filter applied by WebClientUtils (used by the REST API and GraphQL datasource plugins) validates hosts against an exact-match string denylist. The comprehensive address-class check (loopback, any-local, link-local, fc00::/7) exists only on a separate code path used by SMTP, not by the HTTP plugin path. As a result, an authenticated user can craft outbound requests that reach loopback-bound services inside the container. This vulnerability is fixed in 2.1. |
| MosaicML Composer Deserialization of Untrusted Data Remote Code Execution Vulnerability. This vulnerability allows remote attackers to execute arbitrary code on affected installations of MosaicML Composer. User interaction is required to exploit this vulnerability in that the target must visit a malicious page or open a malicious file.
The specific flaw exists within the parsing of checkpoints. The issue results from the lack of proper validation of user-supplied data, which can result in deserialization of untrusted data. An attacker can leverage this vulnerability to execute code in the context of the current process. Was ZDI-CAN-27990. |
| Appsmith is a platform to build admin panels, internal tools, and dashboards. Prior to 2.1, Appsmith's bundled supervisord exposes an XML-RPC interface on port 9001, reachable from outside the container via a Caddy reverse-proxy route at /supervisor/* on the public ingress. Combined with the APPSMITH_SUPERVISOR_PASSWORD exposed via GET /api/v1/admin/env, any authenticated administrator can send arbitrary XML-RPC calls to supervisord and execute OS commands inside the Docker container via twiddler.addProgramToGroup. This vulnerability is fixed in 2.1. |
| Chrome DevTools for agents (chrome-devtools-mcp) lets your coding agent control and inspect a live Chrome browser. From 0.20.0 until 1.1.0, The chrome-devtools-mcp daemon writes its PID file with fs.writeFileSync() to a deterministic runtime path. On typical macOS environments, and on Linux sessions where $XDG_RUNTIME_DIR is unset, that runtime path falls back to /tmp/chrome-devtools-mcp-<uid>/daemon.pid. Because the write does not use O_NOFOLLOW, a local low-privilege user on the same POSIX host can pre-create /tmp/chrome-devtools-mcp-<victim_uid>/daemon.pid as a symlink to a file writable by the victim. When the victim later starts daemon mode, fs.writeFileSync() follows the symlink and truncates the target file to the daemon PID string. This vulnerability is fixed in 1.1.0. |
| Jenkins Active Directory Plugin 2.41.1 and earlier does not escape the user name before building the LDAP search filter in the Windows native (ADSI) authentication path, allowing unauthenticated attackers to inject LDAP wildcard characters to enumerate directory entries and to authenticate as a matching user whose password they know without knowing their exact user name. |
| Jenkins Assembla Plugin 1.4 and earlier does not configure its XML parser to prevent XML external entity (XXE) attacks, allowing attackers able to control the responses of the configured Assembla server to extract secrets from the Jenkins controller or perform server-side request forgery. |
| In the Linux kernel, the following vulnerability has been resolved:
crypto: af_alg - Cap AEAD AD length to 0x80000000
In order to prevent arithmetic overflows when checking the TX
buffer size, cap the associated data length to 0x80000000. |
| In the Linux kernel, the following vulnerability has been resolved:
netdevsim: zero initialize struct iphdr in dummy sk_buff
Syzbot reports a KMSAN uninit-value originating from
nsim_dev_trap_skb_build, with the allocation also
being performed in the same function.
Fix this by calling skb_put_zero instead of skb_put to
guarantee zero initialization of the whole IP header. |
| In the Linux kernel, the following vulnerability has been resolved:
pppoe: drop PFC frames
RFC 2516 Section 7 states that Protocol Field Compression (PFC) is NOT
RECOMMENDED for PPPoE. In practice, pppd does not support negotiating
PFC for PPPoE sessions, and the current PPPoE driver assumes an
uncompressed (2-byte) protocol field. However, the generic PPP layer
function ppp_input() is not aware of the negotiation result, and still
accepts PFC frames.
If a peer with a broken implementation or an attacker sends a frame with
a compressed (1-byte) protocol field, the subsequent PPP payload is
shifted by one byte. This causes the network header to be 4-byte
misaligned, which may trigger unaligned access exceptions on some
architectures.
To reduce the attack surface, drop PPPoE PFC frames. Introduce
ppp_skb_is_compressed_proto() helper function to be used in both
ppp_generic.c and pppoe.c to avoid open-coding. |
| In the Linux kernel, the following vulnerability has been resolved:
net, bpf: fix null-ptr-deref in xdp_master_redirect() for down master
syzkaller reported a kernel panic in bond_rr_gen_slave_id() reached via
xdp_master_redirect(). Full decoded trace:
https://syzkaller.appspot.com/bug?extid=80e046b8da2820b6ba73
bond_rr_gen_slave_id() dereferences bond->rr_tx_counter, a per-CPU
counter that bonding only allocates in bond_open() when the mode is
round-robin. If the bond device was never brought up, rr_tx_counter
stays NULL.
The XDP redirect path can still reach that code on a bond that was
never opened: bpf_master_redirect_enabled_key is a global static key,
so as soon as any bond device has native XDP attached, the
XDP_TX -> xdp_master_redirect() interception is enabled for every
slave system-wide. The path xdp_master_redirect() ->
bond_xdp_get_xmit_slave() -> bond_xdp_xmit_roundrobin_slave_get() ->
bond_rr_gen_slave_id() then runs against a bond that has no
rr_tx_counter and crashes.
Fix this in the generic xdp_master_redirect() by refusing to call into
the master's ->ndo_xdp_get_xmit_slave() when the master device is not
up. IFF_UP is only set after ->ndo_open() has successfully returned,
so this reliably excludes masters whose XDP state has not been fully
initialized. Drop the frame with XDP_ABORTED so the exception is
visible via trace_xdp_exception() rather than silently falling through.
This is not specific to bonding: any current or future master that
defers XDP state allocation to ->ndo_open() is protected. |
| In the Linux kernel, the following vulnerability has been resolved:
net: hamradio: 6pack: fix uninit-value in sixpack_receive_buf
sixpack_receive_buf() does not properly skip bytes with TTY error flags.
The while loop iterates through the flags buffer but never advances the
data pointer (cp), and passes the original count (including error bytes)
to sixpack_decode(). This causes sixpack_decode() to process bytes that
should have been skipped due to TTY errors. The TTY layer does not
guarantee that cp[i] holds a meaningful value when fp[i] is set, so
passing those positions to sixpack_decode() results in KMSAN reporting
an uninit-value read.
Fix this by processing bytes one at a time, advancing cp on each
iteration, and only passing valid (non-error) bytes to sixpack_decode().
This matches the pattern used by slip_receive_buf() and
mkiss_receive_buf() for the same purpose. |
