| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| SolidCAM-GPPL-IDE is an unofficial, independently developed extension, Postprocessor IDE for SolidCAM. From version 1.0.0 to before version 1.0.2, the inc "filename" directive in GPPL postprocessor files is resolved by GpplDocumentLinkHandler into a clickable link (VS Code textDocument/documentLink). The handler accepted arbitrary paths — absolute, relative with parent-directory segments (..\..\..\), UNC (\\server\share\), and arbitrary subfolders — and called File.Exists on each to decide whether to render the link. Two distinct attack surfaces resulted: information disclosure via File.Exists probing and NTLM hash leak via UNC path probing. This issue has been patched in version 1.0.2. |
| Netgate pfSense CE 2.8.0 allows code execution in the XMLRPC API via pfsense.exec_php. NOTE: the Supplier disputes this because the API call is only available to admins and they are intentionally allowed to execute PHP code. |
| In the Linux kernel, the following vulnerability has been resolved:
net: xilinx: axienet: Fix BQL accounting for multi-BD TX packets
When a TX packet spans multiple buffer descriptors (scatter-gather),
axienet_free_tx_chain sums the per-BD actual length from descriptor
status into a caller-provided accumulator. That sum is reset on each
NAPI poll. If the BDs for a single packet complete across different
polls, the earlier bytes are lost and never credited to BQL. This
causes BQL to think bytes are permanently in-flight, eventually
stalling the TX queue.
The SKB pointer is stored only on the last BD of a packet. When that
BD completes, use skb->len for the byte count instead of summing
per-BD status lengths. This matches netdev_sent_queue(), which debits
skb->len, and naturally survives across polls because no partial
packet contributes to the accumulator. |
| In the Linux kernel, the following vulnerability has been resolved:
media: pvrusb2: fix URB leak in pvr2_send_request_ex
When pvr2_send_request_ex() submits a write URB successfully but fails to
submit the read URB (e.g. returns -ENOMEM), it returns immediately without
waiting for the write URB to complete. Since the driver reuses the same
URB structure, a subsequent call to pvr2_send_request_ex() attempts to
submit the still-active write URB, triggering a 'URB submitted while
active' warning in usb_submit_urb().
Fix this by ensuring the write URB is unlinked and waited upon if the read
URB submission fails. |
| In the Linux kernel, the following vulnerability has been resolved:
serial: caif: hold tty->link reference in ldisc_open and ser_release
A reproducer triggers a KASAN slab-use-after-free in pty_write_room()
when caif_serial's TX path calls tty_write_room(). The faulting access
is on tty->link->port.
Hold an extra kref on tty->link for the lifetime of the caif_serial line
discipline: get it in ldisc_open() and drop it in ser_release(), and
also drop it on the ldisc_open() error path.
With this change applied, the reproducer no longer triggers the UAF in
my testing. |
| In the Linux kernel, the following vulnerability has been resolved:
net/mlx5e: RX, Fix XDP multi-buf frag counting for striding RQ
XDP multi-buf programs can modify the layout of the XDP buffer when the
program calls bpf_xdp_pull_data() or bpf_xdp_adjust_tail(). The
referenced commit in the fixes tag corrected the assumption in the mlx5
driver that the XDP buffer layout doesn't change during a program
execution. However, this fix introduced another issue: the dropped
fragments still need to be counted on the driver side to avoid page
fragment reference counting issues.
The issue was discovered by the drivers/net/xdp.py selftest,
more specifically the test_xdp_native_tx_mb:
- The mlx5 driver allocates a page_pool page and initializes it with
a frag counter of 64 (pp_ref_count=64) and the internal frag counter
to 0.
- The test sends one packet with no payload.
- On RX (mlx5e_skb_from_cqe_mpwrq_nonlinear()), mlx5 configures the XDP
buffer with the packet data starting in the first fragment which is the
page mentioned above.
- The XDP program runs and calls bpf_xdp_pull_data() which moves the
header into the linear part of the XDP buffer. As the packet doesn't
contain more data, the program drops the tail fragment since it no
longer contains any payload (pp_ref_count=63).
- mlx5 device skips counting this fragment. Internal frag counter
remains 0.
- mlx5 releases all 64 fragments of the page but page pp_ref_count is
63 => negative reference counting error.
Resulting splat during the test:
WARNING: CPU: 0 PID: 188225 at ./include/net/page_pool/helpers.h:297 mlx5e_page_release_fragmented.isra.0+0xbd/0xe0 [mlx5_core]
Modules linked in: [...]
CPU: 0 UID: 0 PID: 188225 Comm: ip Not tainted 6.18.0-rc7_for_upstream_min_debug_2025_12_08_11_44 #1 NONE
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.13.0-0-gf21b5a4aeb02-prebuilt.qemu.org 04/01/2014
RIP: 0010:mlx5e_page_release_fragmented.isra.0+0xbd/0xe0 [mlx5_core]
[...]
Call Trace:
<TASK>
mlx5e_free_rx_mpwqe+0x20a/0x250 [mlx5_core]
mlx5e_dealloc_rx_mpwqe+0x37/0xb0 [mlx5_core]
mlx5e_free_rx_descs+0x11a/0x170 [mlx5_core]
mlx5e_close_rq+0x78/0xa0 [mlx5_core]
mlx5e_close_queues+0x46/0x2a0 [mlx5_core]
mlx5e_close_channel+0x24/0x90 [mlx5_core]
mlx5e_close_channels+0x5d/0xf0 [mlx5_core]
mlx5e_safe_switch_params+0x2ec/0x380 [mlx5_core]
mlx5e_change_mtu+0x11d/0x490 [mlx5_core]
mlx5e_change_nic_mtu+0x19/0x30 [mlx5_core]
netif_set_mtu_ext+0xfc/0x240
do_setlink.isra.0+0x226/0x1100
rtnl_newlink+0x7a9/0xba0
rtnetlink_rcv_msg+0x220/0x3c0
netlink_rcv_skb+0x4b/0xf0
netlink_unicast+0x255/0x380
netlink_sendmsg+0x1f3/0x420
__sock_sendmsg+0x38/0x60
____sys_sendmsg+0x1e8/0x240
___sys_sendmsg+0x7c/0xb0
[...]
__sys_sendmsg+0x5f/0xb0
do_syscall_64+0x55/0xc70
The problem applies for XDP_PASS as well which is handled in a different
code path in the driver.
This patch fixes the issue by doing page frag counting on all the
original XDP buffer fragments for all relevant XDP actions (XDP_TX ,
XDP_REDIRECT and XDP_PASS). This is basically reverting to the original
counting before the commit in the fixes tag.
As frag_page is still pointing to the original tail, the nr_frags
parameter to xdp_update_skb_frags_info() needs to be calculated
in a different way to reflect the new nr_frags. |
| In the Linux kernel, the following vulnerability has been resolved:
fbdev: of: display_timing: fix refcount leak in of_get_display_timings()
of_parse_phandle() returns a device_node with refcount incremented,
which is stored in 'entry' and then copied to 'native_mode'. When the
error paths at lines 184 or 192 jump to 'entryfail', native_mode's
refcount is not decremented, causing a refcount leak.
Fix this by changing the goto target from 'entryfail' to 'timingfail',
which properly calls of_node_put(native_mode) before cleanup. |
| Traccar is an open source GPS tracking system. In org.traccar:traccar versions starting at 6.11.1 before 6.13.0, the KML and GPX export functionality writes device names to XML output without proper escaping. An attacker with low privileges can create a device with a crafted name that injects XML content into exported files. If another user exports and opens the affected KML or GPX file, this can corrupt the file structure and spoof exported location data. This issue is fixed in version 6.13.0. |
| In the Linux kernel, the following vulnerability has been resolved:
media: mtk-mdp: Fix a reference leak bug in mtk_mdp_remove()
In mtk_mdp_probe(), vpu_get_plat_device() increases the reference
count of the returned platform device. Add platform_device_put()
to prevent reference leak. |
| Server-side request forgery (ssrf) in Azure Notification Service allows an authorized attacker to elevate privileges over a network. |
| OmniFaces is a utility library for Faces. Prior to versions 1.14.2, 2.7.32, 3.14.16, 4.7.5, and 5.2.3, there is a server-side EL injection leading to Remote Code Execution (RCE). This affects applications that use CDNResourceHandler with a wildcard CDN mapping (e.g. libraryName:*=https://cdn.example.com/*). An attacker can craft a resource request URL containing an EL expression in the resource name, which is evaluated server-side. This issue has been patched in versions 1.14.2, 2.7.32, 3.14.16, 4.7.5, and 5.2.3. |
| Flarum is open-source forum software. Prior to versions 1.8.16 and 2.0.0-rc.1, Flarum's patch for CVE-2023-27577 restricted the @import and data-uri() LESS features in the custom_less setting, but the same restriction was never applied to other settings registered as LESS config variables (for example theme_primary_color and theme_secondary_color, as well as any key registered via Extend\Settings::registerLessConfigVar()). Those values are interpolated verbatim into the LESS source at compile time, allowing an authenticated administrator to craft a theme-color value that injects an arbitrary @import directive into the compiled forum.css. Because the underlying LESS parser honours @import (inline) '<path>', an attacker can read arbitrary files reachable by the PHP process (local file inclusion) or trigger outbound HTTP(S) requests (server-side request forgery). This issue has been patched in versions 1.8.16 and 2.0.0-rc.1. |
| PraisonAI is a multi-agent teams system. Prior to version 4.6.34, PraisonAI's MCP (Model Context Protocol) server (praisonai mcp serve) registers four file-handling tools by default — praisonai.rules.create, praisonai.rules.show, praisonai.rules.delete, and praisonai.workflow.show. Each accepts a path or filename string from MCP tools/call arguments and joins it onto ~/.praison/rules/ (or, for workflow.show, accepts an absolute path) with no containment check. The JSON-RPC dispatcher passes params["arguments"] blind to each handler via **kwargs without validating against the advertised input schema. By setting rule_name="../../<some-path>" an attacker walks out of the rules directory and writes any file the running user can write. Dropping a Python .pth file into the user site-packages directory escalates this primitive to arbitrary code execution in any subsequent Python process the user spawns — the next praisonai CLI invocation, an IDE script run, the user's python REPL, or any background Python service. This issue has been patched in version 4.6.34. |
| Gotenberg is an API-based document conversion tool. In versions 8.30.1 and earlier, the default private-IP deny-lists for the --webhook-deny-list and --api-download-from-deny-list flags use a case-sensitive regular expression (^https?://) to match URL schemes. Because Go's net/url.Parse() normalizes the scheme to lowercase before establishing the outbound TCP connection, an attacker can bypass the deny-list by simply capitalizing part of the URL scheme (e.g., HTTP://, HTTPS://, or Http://). This allows unauthenticated requests to reach internal network services, including private IP ranges, loopback addresses, and cloud instance metadata endpoints such as HTTP://169.254.169.254/latest/meta-data/.
This bypasses the same security control that was patched in CVE-2026-27018.
This issue has been fixed in version 8.31.0. |
| Gotenberg is an API-based document conversion tool. In version 8.29.1, an unauthenticated attacker with network access can force the server to make outbound HTTP POST requests to arbitrary internal or external destinations by supplying a crafted URL in the Gotenberg-Webhook-Url request header. The FilterDeadline function in filter.go is intended to gate outbound URLs, but when both the allow-list and deny-list are empty (the default configuration), it returns nil unconditionally and permits any URL.
This is a blind SSRF: Gotenberg POSTs the converted document to the webhook URL and only checks whether the response status code is an error, but never returns the target's response body to the attacker. An attacker can use this to probe internal network infrastructure by observing whether the error callback is invoked, force POST requests against internal services that perform side effects, and confirm reachability of cloud metadata endpoints. The retryable HTTP client issues up to 4 automatic retries per request, amplifying each probe.
This issue has been fixed in version 8.31.0. As a workaround, configure the GOTENBERG_API_WEBHOOK_ALLOW_LIST environment variable to restrict webhook URLs to known receivers, or set GOTENBERG_API_WEBHOOK_DENY_LIST to block RFC-1918 and link-local address ranges. |
| In the Linux kernel, the following vulnerability has been resolved:
iio: light: bh1780: fix PM runtime leak on error path
Move pm_runtime_put_autosuspend() before the error check to ensure
the PM runtime reference count is always decremented after
pm_runtime_get_sync(), regardless of whether the read operation
succeeds or fails. |
| In the Linux kernel, the following vulnerability has been resolved:
gpib: lpvo_usb: fix memory leak on disconnect
The driver iterates over the registered USB interfaces during GPIB
attach and takes a reference to their USB devices until a match is
found. These references are never released which leads to a memory leak
when devices are disconnected.
Fix the leak by dropping the unnecessary references. |
| In the Linux kernel, the following vulnerability has been resolved:
RDMA/umem: Fix double dma_buf_unpin in failure path
In ib_umem_dmabuf_get_pinned_with_dma_device(), the call to
ib_umem_dmabuf_map_pages() can fail. If this occurs, the dmabuf
is immediately unpinned but the umem_dmabuf->pinned flag is still
set. Then, when ib_umem_release() is called, it calls
ib_umem_dmabuf_revoke() which will call dma_buf_unpin() again.
Fix this by removing the immediate unpin upon failure and just let
the ib_umem_release/revoke path handle it. This also ensures the
proper unmap-unpin unwind ordering if the dmabuf_map_pages call
happened to fail due to dma_resv_wait_timeout (and therefore has
a non-NULL umem_dmabuf->sgt). |
| PhpSpreadsheet is a library for reading and writing spreadsheet files. In versions 1.30.2 and earlier, 2.0.0 through 2.1.14, 2.2.0 through 2.4.3, 3.3.0 through 3.10.3, and 4.0.0 through 5.5.0, when the filename argument to IOFactory::load() is user-controlled, an attacker can supply a PHP stream wrapper path (such as phar://, ftp://, or ssh2.sftp://) that passes the is_file() check in File::assertFile(). The phar:// wrapper triggers deserialization of the PHAR metadata, which can lead to remote code execution if a suitable gadget chain is available in the application. The ftp:// and ssh2.sftp:// wrappers can be used for server-side request forgery. This issue has been fixed in versions 1.30.3, 2.1.15, 2.4.4, 3.10.4, and 5.6.0. |
| Math.js is an extensive math library for JavaScript and Node.js. From version 13.1.0 to before version 15.2.0, arbitrary JavaScript can be executed via the expression parser of mathjs. This issue has been patched in version 15.2.0. |
