| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
sched_ext: Fix starvation of scx_enable() under fair-class saturation
During scx_enable(), the READY -> ENABLED task switching loop changes the
calling thread's sched_class from fair to ext. Since fair has higher
priority than ext, saturating fair-class workloads can indefinitely starve
the enable thread, hanging the system. This was introduced when the enable
path switched from preempt_disable() to scx_bypass() which doesn't protect
against fair-class starvation. Note that the original preempt_disable()
protection wasn't complete either - in partial switch modes, the calling
thread could still be starved after preempt_enable() as it may have been
switched to ext class.
Fix it by offloading the enable body to a dedicated system-wide RT
(SCHED_FIFO) kthread which cannot be starved by either fair or ext class
tasks. scx_enable() lazily creates the kthread on first use and passes the
ops pointer through a struct scx_enable_cmd containing the kthread_work,
then synchronously waits for completion.
The workfn runs on a different kthread from sch->helper (which runs
disable_work), so it can safely flush disable_work on the error path
without deadlock. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/panthor: fix for dma-fence safe access rules
Commit 506aa8b02a8d6 ("dma-fence: Add safe access helpers and document
the rules") details the dma-fence safe access rules. The most common
culprit is that drm_sched_fence_get_timeline_name may race with
group_free_queue. |
| In the Linux kernel, the following vulnerability has been resolved:
clocksource/drivers/sh_tmu: Always leave device running after probe
The TMU device can be used as both a clocksource and a clockevent
provider. The driver tries to be smart and power itself on and off, as
well as enabling and disabling its clock when it's not in operation.
This behavior is slightly altered if the TMU is used as an early
platform device in which case the device is left powered on after probe,
but the clock is still enabled and disabled at runtime.
This has worked for a long time, but recent improvements in PREEMPT_RT
and PROVE_LOCKING have highlighted an issue. As the TMU registers itself
as a clockevent provider, clockevents_register_device(), it needs to use
raw spinlocks internally as this is the context of which the clockevent
framework interacts with the TMU driver. However in the context of
holding a raw spinlock the TMU driver can't really manage its power
state or clock with calls to pm_runtime_*() and clk_*() as these calls
end up in other platform drivers using regular spinlocks to control
power and clocks.
This mix of spinlock contexts trips a lockdep warning.
=============================
[ BUG: Invalid wait context ]
6.18.0-arm64-renesas-09926-gee959e7c5e34 #1 Not tainted
-----------------------------
swapper/0/0 is trying to lock:
ffff000008c9e180 (&dev->power.lock){-...}-{3:3}, at: __pm_runtime_resume+0x38/0x88
other info that might help us debug this:
context-{5:5}
1 lock held by swapper/0/0:
ccree e6601000.crypto: ARM CryptoCell 630P Driver: HW version 0xAF400001/0xDCC63000, Driver version 5.0
#0: ffff8000817ec298
ccree e6601000.crypto: ARM ccree device initialized
(tick_broadcast_lock){-...}-{2:2}, at: __tick_broadcast_oneshot_control+0xa4/0x3a8
stack backtrace:
CPU: 0 UID: 0 PID: 0 Comm: swapper/0 Not tainted 6.18.0-arm64-renesas-09926-gee959e7c5e34 #1 PREEMPT
Hardware name: Renesas Salvator-X 2nd version board based on r8a77965 (DT)
Call trace:
show_stack+0x14/0x1c (C)
dump_stack_lvl+0x6c/0x90
dump_stack+0x14/0x1c
__lock_acquire+0x904/0x1584
lock_acquire+0x220/0x34c
_raw_spin_lock_irqsave+0x58/0x80
__pm_runtime_resume+0x38/0x88
sh_tmu_clock_event_set_oneshot+0x84/0xd4
clockevents_switch_state+0xfc/0x13c
tick_broadcast_set_event+0x30/0xa4
__tick_broadcast_oneshot_control+0x1e0/0x3a8
tick_broadcast_oneshot_control+0x30/0x40
cpuidle_enter_state+0x40c/0x680
cpuidle_enter+0x30/0x40
do_idle+0x1f4/0x280
cpu_startup_entry+0x34/0x40
kernel_init+0x0/0x130
do_one_initcall+0x0/0x230
__primary_switched+0x88/0x90
For non-PREEMPT_RT builds this is not really an issue, but for
PREEMPT_RT builds where normal spinlocks can sleep this might be an
issue. Be cautious and always leave the power and clock running after
probe. |
| In the Linux kernel, the following vulnerability has been resolved:
bnxt_en: set backing store type from query type
bnxt_hwrm_func_backing_store_qcaps_v2() stores resp->type from the
firmware response in ctxm->type and later uses that value to index
fixed backing-store metadata arrays such as ctx_arr[] and
bnxt_bstore_to_trace[].
ctxm->type is fixed by the current backing-store query type and matches
the array index of ctx->ctx_arr. Set ctxm->type from the current loop
variable instead of depending on resp->type.
Also update the loop to advance type from next_valid_type in the for
statement, which keeps the control flow simpler for non-valid and
unchanged entries. |
| In the Linux kernel, the following vulnerability has been resolved:
net/mlx5e: Fix DMA FIFO desync on error CQE SQ recovery
In case of a TX error CQE, a recovery flow is triggered,
mlx5e_reset_txqsq_cc_pc() resets dma_fifo_cc to 0 but not dma_fifo_pc,
desyncing the DMA FIFO producer and consumer.
After recovery, the producer pushes new DMA entries at the old
dma_fifo_pc, while the consumer reads from position 0.
This causes us to unmap stale DMA addresses from before the recovery.
The DMA FIFO is a purely software construct with no HW counterpart.
At the point of reset, all WQEs have been flushed so dma_fifo_cc is
already equal to dma_fifo_pc. There is no need to reset either counter,
similar to how skb_fifo pc/cc are untouched.
Remove the 'dma_fifo_cc = 0' reset.
This fixes the following WARNING:
WARNING: CPU: 0 PID: 0 at drivers/iommu/dma-iommu.c:1240 iommu_dma_unmap_page+0x79/0x90
Modules linked in: mlx5_vdpa vringh vdpa bonding mlx5_ib mlx5_vfio_pci ipip mlx5_fwctl tunnel4 mlx5_core ib_ipoib geneve ip6_gre ip_gre gre nf_tables ip6_tunnel rdma_ucm ib_uverbs ib_umad vfio_pci vfio_pci_core act_mirred act_skbedit act_vlan vhost_net vhost tap ip6table_mangle ip6table_nat ip6table_filter ip6_tables iptable_mangle cls_matchall nfnetlink_cttimeout act_gact cls_flower sch_ingress vhost_iotlb iptable_raw tunnel6 vfio_iommu_type1 vfio openvswitch nsh rpcsec_gss_krb5 auth_rpcgss oid_registry xt_conntrack xt_MASQUERADE nf_conntrack_netlink nfnetlink iptable_nat nf_nat xt_addrtype br_netfilter overlay zram zsmalloc rpcrdma ib_iser libiscsi scsi_transport_iscsi rdma_cm iw_cm ib_cm ib_core fuse [last unloaded: nf_tables]
CPU: 0 UID: 0 PID: 0 Comm: swapper/0 Not tainted 6.13.0-rc5_for_upstream_min_debug_2024_12_30_21_33 #1
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.13.0-0-gf21b5a4aeb02-prebuilt.qemu.org 04/01/2014
RIP: 0010:iommu_dma_unmap_page+0x79/0x90
Code: 2b 4d 3b 21 72 26 4d 3b 61 08 73 20 49 89 d8 44 89 f9 5b 4c 89 f2 4c 89 e6 48 89 ef 5d 41 5c 41 5d 41 5e 41 5f e9 c7 ae 9e ff <0f> 0b 5b 5d 41 5c 41 5d 41 5e 41 5f c3 66 2e 0f 1f 84 00 00 00 00
Call Trace:
<IRQ>
? __warn+0x7d/0x110
? iommu_dma_unmap_page+0x79/0x90
? report_bug+0x16d/0x180
? handle_bug+0x4f/0x90
? exc_invalid_op+0x14/0x70
? asm_exc_invalid_op+0x16/0x20
? iommu_dma_unmap_page+0x79/0x90
? iommu_dma_unmap_page+0x2e/0x90
dma_unmap_page_attrs+0x10d/0x1b0
mlx5e_tx_wi_dma_unmap+0xbe/0x120 [mlx5_core]
mlx5e_poll_tx_cq+0x16d/0x690 [mlx5_core]
mlx5e_napi_poll+0x8b/0xac0 [mlx5_core]
__napi_poll+0x24/0x190
net_rx_action+0x32a/0x3b0
? mlx5_eq_comp_int+0x7e/0x270 [mlx5_core]
? notifier_call_chain+0x35/0xa0
handle_softirqs+0xc9/0x270
irq_exit_rcu+0x71/0xd0
common_interrupt+0x7f/0xa0
</IRQ>
<TASK>
asm_common_interrupt+0x22/0x40 |
| Use-after-free in the DOM: Networking component. This vulnerability was fixed in Firefox 150.0.2, Firefox ESR 140.10.2, Firefox ESR 115.35.2, Thunderbird 150.0.2, and Thunderbird 140.10.2. |
| In the Linux kernel, the following vulnerability has been resolved:
ring-buffer: Fix possible dereference of uninitialized pointer
There is a pointer head_page in rb_meta_validate_events() which is not
initialized at the beginning of a function. This pointer can be dereferenced
if there is a failure during reader page validation. In this case the control
is passed to "invalid" label where the pointer is dereferenced in a loop.
To fix the issue initialize orig_head and head_page before calling
rb_validate_buffer.
Found by Linux Verification Center (linuxtesting.org) with SVACE. |
| In the Linux kernel, the following vulnerability has been resolved:
md-cluster: fix NULL pointer dereference in process_metadata_update
The function process_metadata_update() blindly dereferences the 'thread'
pointer (acquired via rcu_dereference_protected) within the wait_event()
macro.
While the code comment states "daemon thread must exist", there is a valid
race condition window during the MD array startup sequence (md_run):
1. bitmap_load() is called, which invokes md_cluster_ops->join().
2. join() starts the "cluster_recv" thread (recv_daemon).
3. At this point, recv_daemon is active and processing messages.
4. However, mddev->thread (the main MD thread) is not initialized until
later in md_run().
If a METADATA_UPDATED message is received from a remote node during this
specific window, process_metadata_update() will be called while
mddev->thread is still NULL, leading to a kernel panic.
To fix this, we must validate the 'thread' pointer. If it is NULL, we
release the held lock (no_new_dev_lockres) and return early, safely
ignoring the update request as the array is not yet fully ready to
process it. |
| In the Linux kernel, the following vulnerability has been resolved:
HID: roccat: fix use-after-free in roccat_report_event
roccat_report_event() iterates over the device->readers list without
holding the readers_lock. This allows a concurrent roccat_release() to
remove and free a reader while it's still being accessed, leading to a
use-after-free.
Protect the readers list traversal with the readers_lock mutex. |
| In the Linux kernel, the following vulnerability has been resolved:
dm: clear cloned request bio pointer when last clone bio completes
Stale rq->bio values have been observed to cause double-initialization of
cloned bios in request-based device-mapper targets, leading to
use-after-free and double-free scenarios.
One such case occurs when using dm-multipath on top of a PCIe NVMe
namespace, where cloned request bios are freed during
blk_complete_request(), but rq->bio is left intact. Subsequent clone
teardown then attempts to free the same bios again via
blk_rq_unprep_clone().
The resulting double-free path looks like:
nvme_pci_complete_batch()
nvme_complete_batch()
blk_mq_end_request_batch()
blk_complete_request() // called on a DM clone request
bio_endio() // first free of all clone bios
...
rq->end_io() // end_clone_request()
dm_complete_request(tio->orig)
dm_softirq_done()
dm_done()
dm_end_request()
blk_rq_unprep_clone() // second free of clone bios
Fix this by clearing the clone request's bio pointer when the last cloned
bio completes, ensuring that later teardown paths do not attempt to free
already-released bios. |
| In the Linux kernel, the following vulnerability has been resolved:
usb: gadget: f_rndis: Protect RNDIS options with mutex
The class/subclass/protocol options are suspectible to race conditions
as they can be accessed concurrently through configfs.
Use existing mutex to protect these options. This issue was identified
during code inspection. |
| In the Linux kernel, the following vulnerability has been resolved:
i3c: mipi-i3c-hci: Fix race in DMA ring dequeue
The HCI DMA dequeue path (hci_dma_dequeue_xfer()) may be invoked for
multiple transfers that timeout around the same time. However, the
function is not serialized and can race with itself.
When a timeout occurs, hci_dma_dequeue_xfer() stops the ring, processes
incomplete transfers, and then restarts the ring. If another timeout
triggers a parallel call into the same function, the two instances may
interfere with each other - stopping or restarting the ring at unexpected
times.
Add a mutex so that hci_dma_dequeue_xfer() is serialized with respect to
itself. |
| In the Linux kernel, the following vulnerability has been resolved:
rust_binder: avoid reading the written value in offsets array
When sending a transaction, its offsets array is first copied into the
target proc's vma, and then the values are read back from there. This is
normally fine because the vma is a read-only mapping, so the target
process cannot change the value under us.
However, if the target process somehow gains the ability to write to its
own vma, it could change the offset before it's read back, causing the
kernel to misinterpret what the sender meant. If the sender happens to
send a payload with a specific shape, this could in the worst case lead
to the receiver being able to privilege escalate into the sender.
The intent is that gaining the ability to change the read-only vma of
your own process should not be exploitable, so remove this TOCTOU read
even though it's unexploitable without another Binder bug. |
| electerm is an open-sourced terminal/ssh/sftp/telnet/serialport/RDP/VNC/Spice/ftp client. Prior to version 3.7.16, the runWidget function in src/app/widgets/load-widget.js constructs a file path by directly concatenating user‑supplied widget identifiers without any sanitisation. Because runWidget is exposed to the renderer process via an asynchronous IPC handler with no input validation, an attacker who achieves JavaScript execution inside the renderer (for example, through a malicious plugin or a cross‑site scripting flaw in the built‑in webview) can abuse a path traversal (../) to load and execute an arbitrary JavaScript file anywhere on the victim’s filesystem. This gives the attacker local code execution with the full privileges of the electerm process, leading to complete system compromise. This issue has been patched in version 3.7.16. |
| electerm is an open-sourced terminal/ssh/sftp/telnet/serialport/RDP/VNC/Spice/ftp client. From versions 3.0.6 to before 3.8.15, electerm is vulnerable to arbitrary local code execution via deep links, CLI --opts, or crafted shortcuts. Exploit requires clicking a crafted electerm://... link or opening a crafted shortcut/command that launches electerm with attacker-controlled opts. This issue has been patched in version 3.8.15. |
| In the Linux kernel, the following vulnerability has been resolved:
usb: legacy: ncm: Fix NPE in gncm_bind
Commit 56a512a9b410 ("usb: gadget: f_ncm: align net_device lifecycle
with bind/unbind") deferred the allocation of the net_device. This
change leads to a NULL pointer dereference in the legacy NCM driver as
it attempts to access the net_device before it's fully instantiated.
Store the provided qmult, host_addr, and dev_addr into the struct
ncm_opts->net_opts during gncm_bind(). These values will be properly
applied to the net_device when it is allocated and configured later in
the binding process by the NCM function driver. |
| PraisonAI is a multi-agent teams system. Prior to version 4.6.34, PraisonAI's MCP (Model Context Protocol) server (praisonai mcp serve) registers four file-handling tools by default — praisonai.rules.create, praisonai.rules.show, praisonai.rules.delete, and praisonai.workflow.show. Each accepts a path or filename string from MCP tools/call arguments and joins it onto ~/.praison/rules/ (or, for workflow.show, accepts an absolute path) with no containment check. The JSON-RPC dispatcher passes params["arguments"] blind to each handler via **kwargs without validating against the advertised input schema. By setting rule_name="../../<some-path>" an attacker walks out of the rules directory and writes any file the running user can write. Dropping a Python .pth file into the user site-packages directory escalates this primitive to arbitrary code execution in any subsequent Python process the user spawns — the next praisonai CLI invocation, an IDE script run, the user's python REPL, or any background Python service. This issue has been patched in version 4.6.34. |
| In the Linux kernel, the following vulnerability has been resolved:
firmware: stratix10-rsu: Fix NULL pointer dereference when RSU is disabled
When the Remote System Update (RSU) isn't enabled in the First Stage
Boot Loader (FSBL), the driver encounters a NULL pointer dereference when
excute svc_normal_to_secure_thread() thread, resulting in a kernel panic:
Unable to handle kernel NULL pointer dereference at virtual address 0000000000000008
Mem abort info:
...
Data abort info:
...
[0000000000000008] user address but active_mm is swapper
Internal error: Oops: 0000000096000004 [#1] SMP
Modules linked in:
CPU: 0 UID: 0 PID: 79 Comm: svc_smc_hvc_thr Not tainted 6.19.0-rc8-yocto-standard+ #59 PREEMPT
Hardware name: SoCFPGA Stratix 10 SoCDK (DT)
pstate: 60000005 (nZCv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--)
pc : svc_normal_to_secure_thread+0x38c/0x990
lr : svc_normal_to_secure_thread+0x144/0x990
...
Call trace:
svc_normal_to_secure_thread+0x38c/0x990 (P)
kthread+0x150/0x210
ret_from_fork+0x10/0x20
Code: 97cfc113 f9400260 aa1403e1 f9400400 (f9400402)
---[ end trace 0000000000000000 ]---
The issue occurs because rsu_send_async_msg() fails when RSU is not enabled
in firmware, causing the channel to be freed via stratix10_svc_free_channel().
However, the probe function continues execution and registers
svc_normal_to_secure_thread(), which subsequently attempts to access the
already-freed channel, triggering the NULL pointer dereference.
Fix this by properly cleaning up the async client and returning early on
failure, preventing the thread from being used with an invalid channel. |
| In the Linux kernel, the following vulnerability has been resolved:
net: use skb_header_pointer() for TCPv4 GSO frag_off check
Syzbot reported a KMSAN uninit-value warning in gso_features_check()
called from netif_skb_features() [1].
gso_features_check() reads iph->frag_off to decide whether to clear
mangleid_features. Accessing the IPv4 header via ip_hdr()/inner_ip_hdr()
can rely on skb header offsets that are not always safe for direct
dereference on packets injected from PF_PACKET paths.
Use skb_header_pointer() for the TCPv4 frag_off check so the header read
is robust whether data is already linear or needs copying.
[1] https://syzkaller.appspot.com/bug?extid=1543a7d954d9c6d00407 |
| In the Linux kernel, the following vulnerability has been resolved:
mm/damon/core: clear walk_control on inactive context in damos_walk()
damos_walk() sets ctx->walk_control to the caller-provided control
structure before checking whether the context is running. If the context
is inactive (damon_is_running() returns false), the function returns
-EINVAL without clearing ctx->walk_control. This leaves a dangling
pointer to a stack-allocated structure that will be freed when the caller
returns.
This is structurally identical to the bug fixed in commit f9132fbc2e83
("mm/damon/core: remove call_control in inactive contexts") for
damon_call(), which had the same pattern of linking a control object and
returning an error without unlinking it.
The dangling walk_control pointer can cause:
1. Use-after-free if the context is later started and kdamond
dereferences ctx->walk_control (e.g., in damos_walk_cancel()
which writes to control->canceled and calls complete())
2. Permanent -EBUSY from subsequent damos_walk() calls, since the
stale pointer is non-NULL
Nonetheless, the real user impact is quite restrictive. The
use-after-free is impossible because there is no damos_walk() callers who
starts the context later. The permanent -EBUSY can actually confuse
users, as DAMON is not running. But the symptom is kept only while the
context is turned off. Turning it on again will make DAMON internally
uses a newly generated damon_ctx object that doesn't have the invalid
damos_walk_control pointer, so everything will work fine again.
Fix this by clearing ctx->walk_control under walk_control_lock before
returning -EINVAL, mirroring the fix pattern from f9132fbc2e83. |
