| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| PhpSpreadsheet is a library for reading and writing spreadsheet files. In versions 1.30.2 and earlier, 2.0.0 through 2.1.14, 2.2.0 through 2.4.3, 3.3.0 through 3.10.3, and 4.0.0 through 5.5.0, when the filename argument to IOFactory::load() is user-controlled, an attacker can supply a PHP stream wrapper path (such as phar://, ftp://, or ssh2.sftp://) that passes the is_file() check in File::assertFile(). The phar:// wrapper triggers deserialization of the PHAR metadata, which can lead to remote code execution if a suitable gadget chain is available in the application. The ftp:// and ssh2.sftp:// wrappers can be used for server-side request forgery. This issue has been fixed in versions 1.30.3, 2.1.15, 2.4.4, 3.10.4, and 5.6.0. |
| In the Linux kernel, the following vulnerability has been resolved:
net: consume xmit errors of GSO frames
udpgro_frglist.sh and udpgro_bench.sh are the flakiest tests
currently in NIPA. They fail in the same exact way, TCP GRO
test stalls occasionally and the test gets killed after 10min.
These tests use veth to simulate GRO. They attach a trivial
("return XDP_PASS;") XDP program to the veth to force TSO off
and NAPI on.
Digging into the failure mode we can see that the connection
is completely stuck after a burst of drops. The sender's snd_nxt
is at sequence number N [1], but the receiver claims to have
received (rcv_nxt) up to N + 3 * MSS [2]. Last piece of the puzzle
is that senders rtx queue is not empty (let's say the block in
the rtx queue is at sequence number N - 4 * MSS [3]).
In this state, sender sends a retransmission from the rtx queue
with a single segment, and sequence numbers N-4*MSS:N-3*MSS [3].
Receiver sees it and responds with an ACK all the way up to
N + 3 * MSS [2]. But sender will reject this ack as TCP_ACK_UNSENT_DATA
because it has no recollection of ever sending data that far out [1].
And we are stuck.
The root cause is the mess of the xmit return codes. veth returns
an error when it can't xmit a frame. We end up with a loss event
like this:
-------------------------------------------------
| GSO super frame 1 | GSO super frame 2 |
|-----------------------------------------------|
| seg | seg | seg | seg | seg | seg | seg | seg |
| 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 |
-------------------------------------------------
x ok ok <ok>| ok ok ok <x>
\\
snd_nxt
"x" means packet lost by veth, and "ok" means it went thru.
Since veth has TSO disabled in this test it sees individual segments.
Segment 1 is on the retransmit queue and will be resent.
So why did the sender not advance snd_nxt even tho it clearly did
send up to seg 8? tcp_write_xmit() interprets the return code
from the core to mean that data has not been sent at all. Since
TCP deals with GSO super frames, not individual segment the crux
of the problem is that loss of a single segment can be interpreted
as loss of all. TCP only sees the last return code for the last
segment of the GSO frame (in <> brackets in the diagram above).
Of course for the problem to occur we need a setup or a device
without a Qdisc. Otherwise Qdisc layer disconnects the protocol
layer from the device errors completely.
We have multiple ways to fix this.
1) make veth not return an error when it lost a packet.
While this is what I think we did in the past, the issue keeps
reappearing and it's annoying to debug. The game of whack
a mole is not great.
2) fix the damn return codes
We only talk about NETDEV_TX_OK and NETDEV_TX_BUSY in the
documentation, so maybe we should make the return code from
ndo_start_xmit() a boolean. I like that the most, but perhaps
some ancient, not-really-networking protocol would suffer.
3) make TCP ignore the errors
It is not entirely clear to me what benefit TCP gets from
interpreting the result of ip_queue_xmit()? Specifically once
the connection is established and we're pushing data - packet
loss is just packet loss?
4) this fix
Ignore the rc in the Qdisc-less+GSO case, since it's unreliable.
We already always return OK in the TCQ_F_CAN_BYPASS case.
In the Qdisc-less case let's be a bit more conservative and only
mask the GSO errors. This path is taken by non-IP-"networks"
like CAN, MCTP etc, so we could regress some ancient thing.
This is the simplest, but also maybe the hackiest fix?
Similar fix has been proposed by Eric in the past but never committed
because original reporter was working with an OOT driver and wasn't
providing feedback (see Link). |
| HCL BigFix RunBookAI is affected by a Continued availability of Less-Secure “Input Text” Vulnerability . A component contains a security weakness in its input handling implementation, increasing the risk of misconfiguration and operational errors. |
| When enabling trace logging in Spring Cloud Config Server sensitive information was placed in plain text in the logs.
Spring Cloud Config 3.1.x: affected from 3.1.0 through 3.1.13 (inclusive); upgrade to 3.1.14 or greater (Enterprise Support Only). Spring Cloud Config 4.1.x: affected from 4.1.0 through 4.1.9 (inclusive); upgrade to 4.1.10 or greater (Enterprise Support Only). Spring Cloud Config 4.2.x: affected from 4.2.0 through 4.2.6 (inclusive); upgrade to 4.2.7 or greater (Enterprise Support Only). Spring Cloud Config 4.3.x: affected from 4.3.0 through 4.3.2 (inclusive); upgrade to 4.3.3 or greater. Spring Cloud Config 5.0.x: affected from 5.0.0 through 5.0.2 (inclusive); upgrade to 5.0.3 or greater. |
| HCL Sametime for Android is impacted by a sensitive information disclosure. Hostnames information is written in application logs and certain URL |
| An authentication bypass vulnerability exists in Vaadin 14.0.0 through 14.14.0, 23.0.0 through 23.6.6, 24.0.0 through 24.9.7 and 25.0.0 through 25.0.1, applications using Spring Security due to inconsistent path pattern matching of reserved framework paths.
Accessing the /VAADIN endpoint without a trailing slash bypasses security filters, and allowing unauthenticated users to trigger framework initialization and create sessions without proper authorization.
Users of affected versions using Spring Security should upgrade as follows: 14.0.0-14.14.0 upgrade to 14.14.1, 23.0.0-23.6.6 to 23.6.7, 24.0.0 - 24.9.7 to 24.9.8, and 25.0.0-25.0.1 upgrade to 25.0.2 or newer.
Please note that Vaadin versions 10-13 and 15-22 are no longer supported and you should update either to the latest 14, 23, 24, 25 version. |
| HCL BigFix Service Management (SX) is affected by a Broken Access Control vulnerability leading to privilege escalation. This could allow unauthorized users to gain elevated privileges, bypassing intended access restrictions. This may result in exposure of sensitive data or unauthorized system modifications |
| HCL BigFix Service Management (SM) is vulnerable to insufficiently protected credentials for a short duration while communicating with a backend, internal application which could allow an attacker to potentially misuse them, if exfiltrated. . |
| An issue was discovered in 6.0 before 6.0.5 and 5.2 before 5.2.14.
Response headers do not vary on cookies if a session is not modified, but `SESSION_SAVE_EVERY_REQUEST` is `True`. A remote attacker can steal a user's session after that user visits a cached public page.
Earlier, unsupported Django series (such as 5.0.x, 4.1.x, and 3.2.x) were not evaluated and may also be affected.
Django would like to thank Cantina for reporting this issue. |
| An issue was discovered in 6.0 before 6.0.5 and 5.2 before 5.2.14.
`django.middleware.cache.UpdateCacheMiddleware` erroneously caches requests where the `Vary` header contained an asterisk (`'*'`). This can lead to private data being stored and served.
Earlier, unsupported Django series (such as 5.0.x, 4.1.x, and 3.2.x) were not evaluated and may also be affected.
Django would like to thank Ahmad Sadeddin for reporting this issue. |
| Hyperledger Fabric is an enterprise-grade permissioned distributed ledger framework for developing solutions and applications. From versions 1.0.0 to 2.2.26, Channel.java implements readObject() and exposes deSerializeChannel() which call ObjectInputStream.readObject() on untrusted byte arrays without configuring an ObjectInputFilter. This is a classic Java deserialization RCE pattern. At time of publication, there are no publicly available patches. |
| A potential logging of the firestore key via logging within nodejs-firestore exists - Developers who were logging objects through this._settings would be logging the firestore key as well potentially exposing it to anyone with logs read access. We recommend upgrading to version 6.1.0 to avoid this issue |
| Insufficient validation of untrusted input in Cookies in Google Chrome prior to 148.0.7778.96 allowed a remote attacker to perform privilege escalation via a crafted HTML page. (Chromium security severity: Medium) |
| IBM Planning Analytics Advanced Certified Containers 3.1.0 through 3.1.4 could allow a local privileged user to obtain sensitive information from environment variables. |
| This vulnerability exists in Quantum Networks router due to lack of enforcement of strong password policies in the web-based management interface. An attacker on the same network could exploit this vulnerability by performing password guessing or brute-force attacks against user accounts, leading to unauthorized access to the targeted device. |
| A storing passwords in a recoverable format vulnerability in Fortinet FortiSOAR PaaS 7.6.0 through 7.6.4, FortiSOAR PaaS 7.5.0 through 7.5.2, FortiSOAR PaaS 7.4 all versions, FortiSOAR PaaS 7.3 all versions, FortiSOAR on-premise 7.6.0 through 7.6.4, FortiSOAR on-premise 7.5.0 through 7.5.2, FortiSOAR on-premise 7.4 all versions, FortiSOAR on-premise 7.3 all versions may allow an authenticated remote attacker to retrieve passwords for multiple installed connectors via server address modification in connector configuration. |
| A storing passwords in a recoverable format vulnerability in Fortinet FortiSOAR PaaS 7.6.0 through 7.6.4, FortiSOAR PaaS 7.5.0 through 7.5.2, FortiSOAR PaaS 7.4 all versions, FortiSOAR PaaS 7.3 all versions, FortiSOAR on-premise 7.6.0 through 7.6.4, FortiSOAR on-premise 7.5.0 through 7.5.2, FortiSOAR on-premise 7.4 all versions, FortiSOAR on-premise 7.3 all versions may allow an authenticated remote attacker to retrieve Service account password via server address modification in LDAP configuration. |
| Deserialization of untrusted data in Microsoft High Performance Compute Pack (HPC) allows an authorized attacker to elevate privileges locally. |
| Arbitrary Class Instantiation via Model Manifest in Apache OpenNLP ExtensionLoader
Versions Affected: before 2.5.9, before 3.0.0-M3
Description:
The ExtensionLoader.instantiateExtension(Class, String) method loads a class by its fully-qualified name via Class.forName() and invokes its no-arg constructor, with the class name sourced from the manifest.properties entry of a model archive. The existing isAssignableFrom check correctly rejects classes that are not subtypes of the expected extension interface (BaseToolFactory for factory=, ArtifactSerializer for serializer-class-*), but the check runs after Class.forName() has already loaded and initialized the named class.
Class.forName() with default initialization semantics executes the target class's static initializer before returning, so an attacker who can supply a crafted model archive can cause the static initializer of any class on the classpath to run during model loading, regardless of whether that class passes the subsequent type check.
Exploitation requires a class with attacker-useful side effects in its static initializer (for example, JNDI lookup, outbound network I/O, or filesystem access) to be present on the classpath, so this is not a drop-in remote code execution; however, the attack surface grows as third-party model distribution becomes more common (community model repositories, Hugging Face-style sharing), where users routinely load model files from origins they do not control. A secondary, narrower vector affects deployments that ship legitimate BaseToolFactory or ArtifactSerializer subclasses with side-effecting no-arg constructors: a malicious manifest can name such a class and force its constructor to run during model load.
Mitigation:
* 2.x users should upgrade to 2.5.9.
* 3.x users should upgrade to 3.0.0-M3.
Note: The fix introduces a package-prefix allowlist that is consulted before Class.forName() is invoked, so the static initializer of a disallowed class is never executed. Classes under the opennlp. prefix remain permitted by default. Deployments that load models referencing factories or serializers outside opennlp.* must opt those packages in, either programmatically via ExtensionLoader.registerAllowedPackage(String) before the first model load, or by setting the OPENNLP_EXT_ALLOWED_PACKAGES system property to a comma-separated list of allowed package prefixes.
Users who cannot upgrade immediately should ensure that all model files are sourced from trusted origins and should audit their classpath for classes with side-effecting static initializers or constructors, particularly any that perform JNDI lookups, network requests, or filesystem operations during class initialization. |
| A flaw was found in ansible-collection-community-general. This vulnerability allows for information exposure (IE) of sensitive credentials, specifically plaintext passwords, via verbose output when running Ansible with debug modes. Attackers with access to logs could retrieve these secrets and potentially compromise Keycloak accounts or administrative access. |
