| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| A potential vulnerability was reported in Lenovo App Store, distributed exclusively in the Chinese market, that could allow a local authenticated user to execute arbitrary code with elevated privileges. |
| In the Linux kernel, the following vulnerability has been resolved:
dma-mapping: move dma_map_resource() sanity check into debug code
dma_map_resource() uses pfn_valid() to ensure the range is not RAM.
However, pfn_valid() only checks for availability of the memory map for
a PFN but it does not ensure that the PFN is actually backed by RAM. On
ARM64 with SPARSEMEM (128MB section granularity), MMIO addresses that
share a section with RAM will falsely trigger the WARN_ON_ONCE and cause
dma_map_resource() to return DMA_MAPPING_ERROR.
This causes a WARNING on Raspberry Pi 4 during spi_bcm2835 probe because
the SPI FIFO register (0xfe204004) falls in the same sparsemem section
as the end of RAM (0xf8000000-0xfbffffff), both in section 31
(0xf8000000-0xffffffff).
Move the sanity check from dma_map_resource() into debug_dma_map_phys()
and replace the unreliable pfn_valid() with pfn_valid() &&
!PageReserved(), which correctly identifies actual usable RAM without
false positives for MMIO regions that happen to have struct pages.
Since dma_map_resource() is dma_map_phys(DMA_ATTR_MMIO), the check
applies equally to both APIs. Any non-reserved page represents kernel
memory to a sufficient degree that using DMA_ATTR_MMIO on it is almost
certainly wrong and risks breaking coherency on non-coherent platforms.
ZONE_DEVICE pages used for PCI P2P DMA (MEMORY_DEVICE_PCI_P2PDMA) have
PageReserved set, so they will not trigger a false positive.
The check no longer blocks the mapping and uses err_printk() to
integrate with dma-debug filtering. |
| Streamsoft Business Intelligence (BI) stores users' passwords in plaintext form in the database
This issue was fixed in version 6.8.0.0, users were also requested to change their password on the first login. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: ath12k: Fix invalid data access in ath12k_dp_rx_h_undecap_nwifi
In certain cases, hardware might provide packets with a
length greater than the maximum native Wi-Fi header length.
This can lead to accessing and modifying fields in the header
within the ath12k_dp_rx_h_undecap_nwifi function for
DP_RX_DECAP_TYPE_NATIVE_WIFI decap type and
potentially resulting in invalid data access and memory corruption.
Add a sanity check before processing the SKB to prevent invalid
data access in the undecap native Wi-Fi function for the
DP_RX_DECAP_TYPE_NATIVE_WIFI decap type.
Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.3.1-00173-QCAHKSWPL_SILICONZ-1 |
| In the Linux kernel, the following vulnerability has been resolved:
block: don't revert iter for -EIOCBQUEUED
blkdev_read_iter() has a few odd checks, like gating the position and
count adjustment on whether or not the result is bigger-than-or-equal to
zero (where bigger than makes more sense), and not checking the return
value of blkdev_direct_IO() before doing an iov_iter_revert(). The
latter can lead to attempting to revert with a negative value, which
when passed to iov_iter_revert() as an unsigned value will lead to
throwing a WARN_ON() because unroll is bigger than MAX_RW_COUNT.
Be sane and don't revert for -EIOCBQUEUED, like what is done in other
spots. |
| Quick.Cart stores hard-coded, plaintext admin credentials in a configuration file. This flaw allows attackers with access to the server file system to retrieve authentication details, potentially leading to privilege escalation.
The vendor assessed the likelihood of exploitation as very low and determined that a fix is not necessary.
Only version 6.7 was tested but all versions should be considered as vulnerable. |
| The Analog Way Picturall Quad Compact Mark II version 3.5.8, contains a local privilege escalation vulnerability in the core firmware. This is due to improper privilege delegation and insufficient input validation in a maintenance script. |
| A flaw was found in the cifs-utils package where the cifs.upcall helper fails to securely drop its root privileges before looking up user information inside a user-controlled environment. A local, low privileged attacker can exploit this by using a crafted request_key payload to trick the root-owned helper into entering a custom environment (namespace) containing a malicious NSS module. This forces the system to load the attacker's controlled NSS Module and configuration, allowing them to execute arbitrary commands as the root user, elevating their privileges and fully compromising the system. |
| Improper Handling of Exceptional Conditions vulnerability in Erlang OTP erts (epmd) allows an unauthenticated remote attacker to permanently terminate the Erlang Port Mapper Daemon (epmd) via connection slot exhaustion.
The do_accept function in erts/epmd/src/epmd_srv.c calls epmd_cleanup_exit() when accept(2) returns EMFILE (per-process file descriptor limit reached) or ENFILE (system-wide file descriptor limit reached), rather than treating these as recoverable conditions. An attacker can exhaust epmd's file descriptor slots by holding many TCP connections open while periodically sending a single byte to reset the idle timeout, then causing accept(2) to return EMFILE, which kills the daemon. epmd has no per-source-IP connection cap, making the attack feasible from a single source.
On Debian/Ubuntu default packaging the impact is amplified: the systemd unit inherits a low file descriptor soft limit, and repeated daemon deaths trigger systemd's start-rate-limit, permanently failing both epmd.service and epmd.socket and requiring manual operator intervention to recover.
This issue affects OTP from OTP 17.0 before OTP 29.0.4, OTP 28.5.0.4 and OTP 27.3.4.15. |
| GUnet OpenEclass 1.7.3 stores user credentials in plaintext, allowing administrators to view all registered users' usernames and passwords without encryption. This vulnerability exposes sensitive information and increases the risk of credential theft and unauthorized access. |
| Heatmiser Wifi Thermostat 1.7 contains a credential disclosure vulnerability that allows unauthenticated attackers to retrieve administrative credentials by accessing the networkSetup.htm page. Attackers can request the networkSetup.htm endpoint and extract plaintext username and password values from HTML form fields to gain administrative access to the thermostat. |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: Propagate error from visit_tailcall_insn
Commit e40f5a6bf88a ("bpf: correct stack liveness for tail calls") added
visit_tailcall_insn() but did not check its return value. |
| Weintek cMT3092X HMI stores user account passwords in plaintext. |
| Pronetiqs IntraVUE Versions 3.2.1a14 and prior have a plaintext storage of a password vulnerability that could expose cleartext credentials through the API. |
| In the Linux kernel, the following vulnerability has been resolved:
ksmbd: add permission checks for FSCTL_DUPLICATE_EXTENTS_TO_FILE
The FSCTL_DUPLICATE_EXTENTS_TO_FILE arm of smb2_ioctl() overwrites the
destination file's data via vfs_clone_file_range() with neither the
share-level KSMBD_TREE_CONN_FLAG_WRITABLE check nor a per-handle
fp->daccess check that the other write-bearing arms carry. A client can
overwrite destination data on a read-only share, or from a handle opened
with only FILE_WRITE_ATTRIBUTES (which still yields an FMODE_WRITE filp).
FILE_WRITE_ATTRIBUTES-only destination handle overwrote the file's data via
the clone. Add both checks, matching the FSCTL_SET_SPARSE permission fix;
require FILE_WRITE_DATA since this writes data. |
| Rapid7 InsightVM, Nexpose, and the Insight Agent execute discovered executables during authenticated assessment without validating file ownership, allowing a local low-privileged user to run code as the scan credential (Scan Engine) or as root/SYSTEM (Insight Agent). Fixed in Scan Engine content 1.1.3935 and Insight Agent content component 0.0.245.0. |
| Frogman provides headless PBX control through MCP and HTTP API. Prior to 1.6.2, Frogman stored API tokens generated by Tools/CreateApiToken.php:33-36 as raw bin2hex(random_bytes(32)) strings in oc_api_tokens, and Frogman.class.php:78 authenticated the X-Frogman-Token header by comparing it with the stored raw value, allowing database read access to recover reusable active tokens at their assigned permission level, including admin. This issue is fixed in version 1.6.2. |
| A sandbox confinement bypass vulnerability exists in Canonical snapd within its internal execution environment compiler (snap-confine). The default seccomp security templates generated by the engine to restrict system calls do not filter or reject process operations capable of creating or manipulating file execution flags with set-user-ID attributes. Consequently, an application running within a strictly confined snap environment can successfully compile or drop binaries and apply setuid properties to them. If a compromised or malicious process inside the snap sandbox executes these generated setuid binaries, it can potentially circumvent architectural sandboxing assumptions, drop intended restriction policies, or execute privileged actions inside the container namespace that should otherwise be strictly blocked. The vulnerability has been resolved by hardening the seccomp template engine to block the execution and creation of setuid executables by sandboxed snap processes. |
| A local privilege escalation vulnerability exists in snap-confine, a set-capabilities core component used internally by Canonical snapd to construct the secure execution environment for snap applications. This vulnerability uniquely affects versions of snap-confine configured with set-capabilities (rather than standard set-uid-root installations).
Due to a flaw in how privilege boundaries or security sandboxes are initialized when the binary runs under limited ambient capabilities, a local, unprivileged attacker can exploit this behavior to bypass intended restrictions and execute arbitrary code. Successful exploitation allows the local user to elevate their privileges to full root authority. |
| A flaw was found in the Ansible Lightspeed extension for Visual Studio Code. This vulnerability allows an attacker with local access to the workstation, or malware running with the user's privileges, to read the Google Gemini API key. The extension insecurely stores the API key in plain text within the user's configuration file and writes it to output log files. This information disclosure can lead to the attacker obtaining the API credential and potentially consuming the user's API quota. |
