| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
sched/psi: Shut down rtpoll_timer in psi_cgroup_free()
psi_schedule_rtpoll_work() is called locklessly from the scheduler hotpath
and can race psi_trigger_destroy() taking down the last rtpoll trigger under
rtpoll_trigger_lock:
psi_schedule_rtpoll_work() psi_trigger_destroy()
rcu_read_lock();
task = rcu_dereference(rtpoll_task);
rcu_assign_pointer(rtpoll_task, NULL);
timer_delete(&rtpoll_timer);
mod_timer(&rtpoll_timer, ...);
rcu_read_unlock();
synchronize_rcu();
kthread_stop(task_to_destroy);
The group can then be freed with the re-armed timer still pending, and
poll_timer_fn() runs on freed memory.
461daba06bdc ("psi: eliminate kthread_worker from psi trigger scheduling
mechanism") deleted the timer synchronously after the synchronize_rcu(),
which prevented this but raced trigger creation instead: the deletion could
cancel the timer that a new trigger set armed during the grace period and,
as creation also reinitialized the timer at the time, corrupt it.
8f91efd870ea ("psi: Fix race between psi_trigger_create/destroy") moved the
initialization into group_init() and the deletion into the locked section,
trading the creation races for the window above.
Neither placement in the destruction path works. A pending timer firing
while the group is alive is harmless though. poll_timer_fn() just wakes the
rtpoll waitqueue and doesn't re-arm itself. Bind the timer to the group's
lifetime instead and shut it down in psi_cgroup_free(). Nothing can arm it
by then. timer_shutdown_sync() because the timer is never armed again. |
| In the Linux kernel, the following vulnerability has been resolved:
sched_ext: Take cgroup_lock() first in scx_cgroup_lock()
scx_cgroup_lock() write-locks scx_cgroup_ops_rwsem and then takes
cgroup_lock(), which can deadlock through kernfs:
scx enable/disable cgroup rmdir cpu.weight write
------------------ ------------ ----------------
cgroup_lock()
percpu_down_write(rwsem)
cgroup_lock()
kernfs_get_active()
percpu_down_read(rwsem)
kernfs_drain()
The enable path waits for the rmdir to release cgroup_mutex. The rmdir,
deactivating the cpu controller's files, waits in kernfs_drain() for the
write's active reference. The write, in scx_group_set_weight(), waits for
the rwsem behind the pending writer.
Take cgroup_lock() first. The set_* paths take no cgroup locks inside the
read side, so a pending write-lock then only waits for read sections that
always run to completion, and no dependency from the rwsem back to
cgroup_mutex remains. |
| In the Linux kernel, the following vulnerability has been resolved:
thunderbolt: Prevent XDomain delayed work use-after-free on disconnect
tb_xdp_handle_request() runs on system_wq and queues
xd->state_work via queue_delayed_work() in three request handlers:
PROPERTIES_CHANGED_REQUEST, UUID_REQUEST (via start_handshake),
and LINK_STATE_CHANGE_REQUEST. Similarly, update_xdomain() queues
xd->properties_changed_work when local properties change.
Concurrently, tb_xdomain_remove() calls stop_handshake() which does
cancel_delayed_work_sync() on both delayed works. Later,
tb_xdomain_unregister() calls device_unregister() which eventually
frees the xdomain. Since commit 559c1e1e0134 ("thunderbolt: Run
tb_xdp_handle_request() in system workqueue") moved the request
handler off tb->wq, the handler and the remove path are no longer
serialized. If queue_delayed_work() executes after
cancel_delayed_work_sync() but before the xdomain is freed, the
delayed work fires on a freed object.
Add xd->removing that tb_xdomain_remove() sets under xd->lock
before calling stop_handshake(). Each external queue site holds
the same lock and checks removing before calling
queue_delayed_work(). This provides the mutual exclusion needed:
either the queue site acquires the lock first and queues work that
the subsequent cancel will see, or the remove path acquires the
lock first and the queue site observes removing == true and skips
the queue. |
| In the Linux kernel, the following vulnerability has been resolved:
KVM: x86: Cancel delayed I/O APIC EOI handling before destroying vCPUs
Cancel (and flush) the I/O APIC's delayed EOI handling work during the
"pre VM destroy" phase, before vCPUs are destroyed, as processing the EOI
broadcast will inject another IRQ if the line is asserted, i.e. will try
to deliver an IRQ to the target vCPU(s). Canceling the work after vCPUs
are destroyed leads to UAF if the delayed work is processed after vCPUs are
destroyed.
BUG: KASAN: slab-use-after-free in __kvm_irq_delivery_to_apic_fast+0x9bf/0xa20 arch/x86/kvm/lapic.c:1250
Read of size 8 at addr ffff8880499abea0 by task kworker/1:2/1218
CPU: 1 UID: 0 PID: 1218 Comm: kworker/1:2 Not tainted 7.1.0-rc7 #5 PREEMPT(lazy)
Hardware name: QEMU Ubuntu 25.10 PC v2 (i440FX + PIIX, + 10.1 machine, 1996), BIOS 1.16.3-debian-1.16.3-2 04/01/2014
Workqueue: events kvm_ioapic_eoi_inject_work
Call Trace:
<TASK>
__dump_stack lib/dump_stack.c:94
dump_stack_lvl+0x100/0x190 lib/dump_stack.c:120
print_address_description mm/kasan/report.c:378
print_report+0x139/0x4ad mm/kasan/report.c:482
kasan_report+0xe4/0x1d0 mm/kasan/report.c:595
__kvm_irq_delivery_to_apic_fast+0x9bf/0xa20 arch/x86/kvm/lapic.c:1250
__kvm_irq_delivery_to_apic+0xd8/0xbf0 arch/x86/kvm/lapic.c:1345
kvm_irq_delivery_to_apic arch/x86/kvm/lapic.h:129
ioapic_service+0x308/0x590 arch/x86/kvm/ioapic.c:492
kvm_ioapic_eoi_inject_work+0x13c/0x190 arch/x86/kvm/ioapic.c:532
process_one_work+0xa59/0x19a0 kernel/workqueue.c:3314
process_scheduled_works kernel/workqueue.c:3397
worker_thread+0x5eb/0xe50 kernel/workqueue.c:3478
kthread+0x370/0x450 kernel/kthread.c:436
ret_from_fork+0x72b/0xd30 arch/x86/kernel/process.c:158
ret_from_fork_asm+0x1a/0x30 arch/x86/entry/entry_64.S:245
</TASK>
Note, the VM is unreachable once kvm_destroy_vm() starts, and scheduling
new work via kvm_ioapic_send_eoi() can only be done via KVM_RUN, i.e.
requires a live vCPU.
Alternatively, KVM could simply destroy the I/O APIC during the "pre" phase
of VM destruction, but that gets more than a bit sketchy as KVM expects the
I/O APIC to exist if ioapic_in_kernel() is true, and nested virtualization
in particular has a bad habit of touching VM-scope state during vCPU
destruction. E.g. attempting to free the PIC during the pre phase would
lead to a NULL pointer dereference in kvm_cpu_has_extint(), and it's not
hard to imagine the I/O APIC having a similar flaw. |
| In the Linux kernel, the following vulnerability has been resolved:
KVM: s390: pci: Fix memory accounting for pinned/unpinned pages
The account_mem() and unaccount_mem() functions call get_uid() which
increments the reference count of struct user_struct on every invocation.
But we don't decrement the count by calling free_uid(). It also
accounted/unaccounted the pages against the current->mm. But its possible
the unaccount_mem() can be called from a different process context than the
one that originally pinned the pages.
Let's fix this by storing the pinning process user_struct and mm_struct
when accounting for pinned pages, and subsequently free these resources
when the pages are unpinned.
[borntraeger@linux.ibm.com: Fixed whitespace] |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: mgmt: fix UAF in pair command cancellation
The pairing completion and authentication failure callbacks look up the
pending MGMT_OP_PAIR_DEVICE command by walking hdev->mgmt_pending. The
lookup returned a command that was still linked on the shared pending list,
without keeping mgmt_pending_lock held for the later dereference and
removal.
A concurrent MGMT_OP_CANCEL_PAIR_DEVICE request can remove and free the
same pending command before the callback uses it. The reverse race is also
possible when cancel_pair_device() gets a command from pending_find() and a
callback removes it before the cancel path dereferences it. This can lead
to a use-after-free and a second list_del().
Make the pairing lookup helpers transfer ownership of the pending command
by removing it from hdev->mgmt_pending while holding mgmt_pending_lock.
The callbacks and cancel path then complete the command and free it
directly, so racing paths cannot find or free the same command again. Take
a temporary hci_conn reference in cancel_pair_device() because the command
completion drops the reference stored in the pending command. |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: hci_sync: Fix advertising data UAFs
hci_find_adv_instance() returns an adv_info pointer that is valid only
while hdev->lock is held. The advertising command-sync paths perform
instance lookups without that lock and, in some cases, retain the pointer
while waiting for a controller response.
An advertising termination event can therefore interleave as follows:
hci_cmd_sync_work hci_rx_work
hci_find_adv_instance()
__hci_cmd_sync_status()
wait for controller reply hci_dev_lock()
hci_remove_adv_instance()
kfree(adv)
adv->scan_rsp_changed = false
KASAN reported:
BUG: KASAN: slab-use-after-free in hci_set_ext_scan_rsp_data_sync+0x2e1/0x300
Write of size 1 at addr ffff88810a45d21d by task kworker/u17:0/88
Workqueue: hci0 hci_cmd_sync_work
Call Trace:
hci_set_ext_scan_rsp_data_sync+0x2e1/0x300
hci_schedule_adv_instance_sync+0x390/0x4c0
hci_cmd_sync_work+0x173/0x300
Allocated by task 87:
hci_add_adv_instance+0x538/0xac0
add_advertising+0x885/0x1160
Freed by task 89:
kfree+0x131/0x3c0
hci_remove_adv_instance+0x1d8/0x3b0
hci_le_ext_adv_term_evt+0x17b/0x730
Protect the instance lookup and payload construction in the extended
advertising, scan response, and periodic advertising data paths. Snapshot
the advertising parameters under hdev->lock, but release the lock before
waiting for the controller.
Clear advertising-data dirty bits before issuing their commands and
restore them after a failure using a fresh lookup. Likewise, update the
reported transmit power through a fresh lookup after the parameter command
completes. No adv_info pointer then survives an HCI command wait. |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: HIDP: reject frames without a transaction header
hidp_recv_ctrl_frame() and hidp_recv_intr_frame() read skb->data[0]
before checking that the L2CAP SDU contains a transaction header. A
connected HIDP peer can send an empty basic-mode SDU and make both paths
use an uninitialized byte from skb tailroom.
KMSAN reports the use in hidp_session_run(), with the uninitialized value
originating in __alloc_skb() through vhci_write(). The control path
produces two reports and the interrupt path produces one.
The byte can also be controlled by a malformed lower-layer packet. If an
HCI ACL packet contains an L2CAP PDU with a declared zero-length payload
followed by an extra 0x15 byte, l2cap_recv_acldata() reduces skb->len to
the declared PDU length before dispatch. The current HIDP path nevertheless
consumes the extra byte as HIDP_TRANS_HID_CONTROL |
HIDP_CTRL_VIRTUAL_CABLE_UNPLUG and terminates the HIDP session. With this
change, the same packet is discarded and a subsequent feature report
request succeeds.
Pull the transaction header with skb_pull_data() and discard frames that
do not contain it. |
| In the Linux kernel, the following vulnerability has been resolved:
ksmbd: reject repeated SMB2 NEGOTIATE requests
Unauthenticated client can send multiple successful SMB2 NEGOTIATE
requests on one connection before SESSION_SETUP. While the connection is
in KSMBD_SESS_NEED_SETUP, smb2_handle_negotiate() accepts another
SMB3.1.1 NEGOTIATE and overwrites conn->preauth_info with a new allocation.
Only the final allocation is freed when the connection is released, leaking
one object for every additional successful request.
A repeated SMB2 NEGOTIATE after a dialect has been selected is a protocol
violation. MS-SMB2 section 3.3.5.4 requires the server to disconnect
without replying in this case. Set the connection exiting when rejecting
the request, in addition to suppressing the response.
Reject SMB2 NEGOTIATE unless the connection is new or is waiting for the
SMB2 NEGOTIATE that follows an SMB1 multi-protocol negotiate. Serialize
both SMB1 and SMB2 negotiation paths under conn->srv_mutex, since they
update connection-wide dialect and negotiation state.
Move the locking contract to ksmbd_smb_negotiate_common(), where the state
and dialect are selected, and add ksmbd_conn_new() for consistent state
access. |
| In the Linux kernel, the following vulnerability has been resolved:
binfmt_misc: restore write access when removing an entry
Registering an entry with the MISC_FMT_OPEN_FILE flag opens the
interpreter via open_exec() which denies write access to it for as
long as the entry exists. Removing the entry closes the interpreter
file via filp_close() but never restores write access, leaving the
inode's i_writecount permanently negative. Opening the interpreter
for writing keeps failing with ETXTBSY long after the entry is gone
until the inode is evicted from the inode cache.
Commit 90f601b497d7 ("binfmt_misc: restore write access before
closing files opened by open_exec()") fixed the same imbalance in the
error path of bm_register_write() but the actual removal path has
been leaking the write denial since the introduction of the flag.
Restore write access in put_binfmt_handler() before closing the
interpreter file. |
| In the Linux kernel, the following vulnerability has been resolved:
binfmt_misc: use exe_file_deny_write_access() for the interpreter clone
For MISC_FMT_OPEN_FILE entries load_misc_binary() clones the
registered interpreter file and denies write access to the clone via
plain deny_write_access(). The clone is installed as
bprm->interpreter and later released by the exec machinery through
exe_file_allow_write_access() which skips the i_writecount increment
for files with FMODE_FSNOTIFY_HSM set.
The deny and allow side can therefore come to different conclusions
when pre-content watches are in play: if a pre-content watch is added
to the interpreter after registration every subsequent exec through
that entry takes a write denial on the clone that is never paired
with a write allowance, driving the interpreter inode's i_writecount
further down with each exec and leaving the interpreter unwritable
even after the entry and all its users are gone.
Take the write denial via exe_file_deny_write_access() so both sides
of the pairing base their decision on the same file mode, and
propagate failure instead of silently ignoring it: an interpreter
that is concurrently open for writing now fails the exec with
ETXTBSY, exactly like an interpreter freshly opened via open_exec()
would. |
| In the Linux kernel, the following vulnerability has been resolved:
binfmt_misc: don't leak the user namespace when the mount fails
bm_get_tree() takes a reference to the user namespace and hands it to
get_tree_keyed() as the sget key. sget_fc() moves that reference into
sb->s_fs_info and clears fc->s_fs_info, so from that point on the
superblock owns it and bm_free() doesn't see it anymore.
The superblock drops it in ->put_super(). But generic_shutdown_super()
only calls ->put_super() from inside the if (sb->s_root) branch, so
nothing releases it when bm_fill_super() fails:
- The kzalloc_obj() failure leaves s_root NULL and the whole branch is
skipped.
- A simple_fill_super() failure in the file loop leaves s_root set, but
s_op still points at simple_super_operations, which has no
->put_super(). bm_fill_super() installs s_ops only once
simple_fill_super() returned success, and installing it earlier
wouldn't help either because simple_fill_super() overwrites s_op.
Either way vfs_get_super() calls deactivate_locked_super() and the
reference is gone for good. binfmt_misc mounts are available in a user
namespace and both the inode and the dentry cache are SLAB_ACCOUNT, so
an unprivileged caller under a tight memory cgroup can fail
simple_fill_super() on demand and leak one user namespace per attempt.
Drop the reference in ->kill_sb() instead, which runs unconditionally,
the same way nfsd and rpc_pipefs release their keyed s_fs_info.
That also stops ->put_super() from clearing s_fs_info while the
superblock is still on @fs_supers. generic_shutdown_super() leaves it
there on purpose so that sget_fc() keeps finding it until kill_sb() has
run, but a NULL s_fs_info makes test_keyed_super() miss it, so a
concurrent mount for the same user namespace skips the grab_super()
wait and creates a second superblock for a namespace that is still
being torn down. |
| In the Linux kernel, the following vulnerability has been resolved:
net: pktgen: fix proc entry use-after-free
pktgen_change_name() replaces pkt_dev->entry while holding t->if_lock.
pktgen_remove_device() removes the same entry before
_rem_dev_from_if_list() takes that lock.
This allows the following interleaving:
CPU 0 (NETDEV_CHANGENAME) CPU 1 (kpktgend)
if_lock(t)
proc_remove(pkt_dev->entry)
proc_remove(pkt_dev->entry)
pkt_dev->entry = proc_create_data(...)
if_unlock(t)
The kthread can pass the stale proc_dir_entry to proc_remove() after the
rename path has freed it. A reproducer with a widened race window reports:
BUG: KASAN: slab-use-after-free in proc_remove+0x78/0x80
Read of size 8 at addr ffff8881478fea70 by task kpktgend_0/67
Call Trace:
proc_remove+0x78/0x80
pktgen_remove_device.isra.0+0x11c/0x4c0
pktgen_thread_worker+0x1214/0x6bc0
kthread+0x2c6/0x3b0
Allocated by task 95:
__proc_create+0x204/0x790
proc_create_data+0x72/0xe0
pktgen_thread_write+0xd61/0x1510
Freed by task 28:
kmem_cache_free+0xcb/0x3d0
proc_free_inode+0x5b/0x80
rcu_core+0x50a/0x1850
The buggy address belongs to the object at ffff8881478fea00
which belongs to the cache proc_dir_entry of size 192
Move proc_remove() into the if_lock-protected list removal helper. Keep it
before list_del_rcu() to preserve the ordering required by add_device().
The rename path must then finish replacing the entry before removal, or
it observes that the device is no longer on the list. |
| In the Linux kernel, the following vulnerability has been resolved:
veth: convert frag_list skbs before running XDP
A frag_list skb can reach veth with data_len set but nr_frags zero.
veth_convert_skb_to_xdp_buff() only converts skbs that are shared,
locked, have frags[], or do not have enough headroom. It later uses
skb_is_nonlinear() to decide whether to set XDP_FLAGS_HAS_FRAGS and
xdp_frags_size.
That exposes frag_list data to XDP as if it were stored in frags[], but
frags[] is empty. AF_XDP copy mode can then trust the bogus XDP fragment
metadata, walk an empty fragment entry, and crash in memcpy() from
__xsk_rcv().
Route non-linear skbs through skb_pp_cow_data() before exposing them to
XDP, and only advertise XDP frags when the resulting skb has frags[].
skb_copy_bits() already handles frag_list input, and skb_pp_cow_data()
builds frags[] output with skb_add_rx_frag(), which is the
representation XDP multi-buffer expects. |
| In the Linux kernel, the following vulnerability has been resolved:
vxlan: use pskb_network_may_pull() for transmit path header pulls
In vxlan_xmit(), arp_reduce(), and vxlan_mdb_entry_skb_get(), pskb_may_pull() was
being called to verify the availability of network layer headers (ARP, IPv6/ND,
IP/IPv6 MDB keys).
However, during transmit skb->data points to the MAC header, so skb_network_offset(skb)
is ETH_HLEN (14 bytes). Using pskb_may_pull(skb, len) only checks len bytes from skb->data
rather than skb_network_offset(skb) + len, which can leave part of the network header
in non-linear frags.
Replace these remaining pskb_may_pull() calls with pskb_network_may_pull() to properly
account for the MAC header offset. |
| In the Linux kernel, the following vulnerability has been resolved:
scsi: scsi_debug: Fix REPORT ZONES alloc_len underflow OOB write
resp_report_zones() sizes the reply buffer from the CDB allocation
length. The v3 fix rounds alloc_len up with ALIGN() before deriving the
descriptor count:
rep_max_zones = (ALIGN((u64)alloc_len, RZONES_DESC_HD) -
RZONES_DESC_HD) >> ilog2(RZONES_DESC_HD);
arr_len = (u64)RZONES_DESC_HD * (rep_max_zones + 1);
For alloc_len in 0xFFFFFFC1..0xFFFFFFFF, ALIGN() rounds up to
0x100000000, so arr_len is 4 GB. On 32-bit, kzalloc()'s size_t is 32-bit
and truncates 0x100000000 to 0; kzalloc(0) returns ZERO_SIZE_PTR, which
passes the !arr check, and desc = arr + 64 is then dereferenced in the
loop -> out-of-bounds write / panic.
Clamp rep_max_zones to devip->nr_zones. The loop already stops at
sdebug_capacity (after nr_zones zones), so a report can never hold more
than nr_zones descriptors; the clamp does not change the report, it only
bounds arr_len to (nr_zones + 1) * RZONES_DESC_HD, a real device
property that can never reach 0x100000000. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amd/pm: fix pptable use-after-free
amdgpu_dpm_get_pp_table() returns a pointer to a driver-owned power table
after dropping adev->pm.mutex. The sysfs path then copies from that pointer.
A concurrent pp_table write can replace and free the allocation during the
copy, causing a use-after-free.
Change the DPM interface to copy into caller-provided storage while the mutex
is held. Keep the size-only query for attribute discovery without exposing
the driver-owned pointer.
(cherry picked from commit f6eed7acfd30099ef7baeb6ba45bb59daad80631) |
| In the Linux kernel, the following vulnerability has been resolved:
usb: typec: ucsi: Fix race condition and ordering in port unregistration
A synchronization issue exists during port unregistration where pending
partner work items can race against workqueue destruction, leading to
use-after-free conditions:
cros_ec_ucsi cros_ec_ucsi.3.auto: error -ETIMEDOUT: PPM init failed
BUG: kernel NULL pointer dereference, address: 0000000000000000
RIP: 0010:__queue_work+0x83/0x4a0
Call Trace:
<IRQ>
__cfi_delayed_work_timer_fn+0x10/0x10
run_timer_softirq+0x3b6/0xbd0
sched_clock_cpu+0xc/0x110
irq_exit_rcu+0x18d/0x330
fred_sysvec_apic_timer_interrupt+0x5e/0x80
Fix this by ensuring strict ordering and proper serialization during
teardown:
1. Move ucsi_unregister_partner() to the beginning of the teardown
sequence and protect it under the connector mutex lock.
2. Ensure all pending partner tasks are explicitly flushed and finished
before the workqueue is destroyed.
3. Switch from mod_delayed_work() to a cancel_delayed_work() and
queue_delayed_work() sequence. This guarantees that items currently marked
as pending won't be scheduled an additional time, preventing a double
release of resources which leads to the following crash:
Oops: general protection fault, probably for non-canonical address
0xdead000000000122: 0000 [#1] SMP NOPTI
Workqueue: cros_ec_ucsi.3.auto-con2 ucsi_poll_worker
RIP: 0010:ucsi_poll_worker+0x65/0x1e0
Call Trace:
<TASK>
process_scheduled_works+0x218/0x6d0
worker_thread+0x188/0x3f0
__cfi_worker_thread+0x10/0x10
kthread+0x226/0x2a0
To ensure these rules are applied identically across both the normal
teardown and the ucsi_init() error paths, consolidate the cleanup logic
into a new helper, ucsi_unregister_port(). |
| In the Linux kernel, the following vulnerability has been resolved:
rxrpc: serialize kernel accept preallocation with socket teardown
rxrpc_kernel_charge_accept() reads rx->backlog without any
socket/backlog synchronization and passes that raw pointer into
rxrpc_service_prealloc_one(). A concurrent rxrpc_discard_prealloc()
sets rx->backlog = NULL and frees the backlog rings, so a kernel
preallocation worker can keep using a freed struct rxrpc_backlog
while updating *_backlog_head/tail and array slots.
Serialize the state check and backlog lookup with the socket lock,
and reject kernel preallocation once teardown has disabled
listening or discarded the service backlog. |
| In the Linux kernel, the following vulnerability has been resolved:
mlxsw: fix refcount leak in mlxsw_sp_port_lag_join()
When mlxsw_sp_port_lag_index_get() fails, mlxsw_sp_port_lag_join()
returns an error without releasing the lag reference obtained by
the earlier mlxsw_sp_lag_get(). All other error paths in the
function jump to the cleanup label that ends with
mlxsw_sp_lag_put(), so this is a single missed release.
Fix the leak by replacing the bare 'return err' with a goto to the
existing error cleanup label, which will drop the reference safely. |
