| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
of: reserved_mem: prevent OOB when too many dynamic regions are defined
On boot, fdt_scan_reserved_mem() saves each dynamically-placed
/reserved-memory subnode into a local array of size
MAX_RESERVED_REGIONS.
If the device tree defines more than MAX_RESERVED_REGIONS
dynamically-placed regions, fdt_scan_reserved_mem() writes past the
end of the local array.
Add a bounds check that logs an error and skips the excess regions,
restoring the original behavior. |
| The Uix UserCenter WordPress plugin through 1.0.3 does not verify that the account being modified through an unauthenticated profile-update action belongs to the requester, and it authenticates that action with a token whose signing key is hardcoded and identical across every install, allowing unauthenticated attackers to forge a token for any user, overwrite an administrator's email and password, and take over the account. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: wcn36xx: fix OOB read from short trigger BA firmware response
The firmware response length is only checked against sizeof(*rsp) (20
bytes), but when candidate_cnt >= 1, a 22-byte candidate struct is read
at buf + 20 without verifying the response contains it. This causes an
out-of-bounds read of stale heap data, corrupting the BA session state.
Add validation that the response includes the candidate data. |
| In the Linux kernel, the following vulnerability has been resolved:
ocfs2: fix out-of-bounds write in ocfs2_remove_refcount_extent
[BUG]
Unlinking a refcounted file whose refcount tree has leaf blocks
triggers a fortify panic due to an out-of-bounds write.
[CAUSE]
When the last leaf block is removed from a refcount tree,
ocfs2_remove_refcount_extent() converts the root back to leaf mode
with a bulk memset on &rb->rf_records. rf_records sits in an anonymous
union with rf_list. rf_list.l_tree_depth aliases rf_records.rl_count,
and is 0 for a single-level tree. With rl_count equal to 0, the memset
writes past the 16-byte declared size of rf_records, which the fortify
checker catches.
[FIX]
Replace the bulk memset on &rb->rf_records with a correctly-bounded
memset on rl_recs[] alone, after setting rl_count to the correct value. |
| In the Linux kernel, the following vulnerability has been resolved:
rapidio/tsi721: prevent a bad dereference in tsi721_db_dpc()
With a list_for_each() loop, if we don't find the item we are looking for
in the list, then the loop exits with the iterator, which is "dbell" in
this loop, pointing to invalid memory.
This code uses the "found" variable to determine if we have found the
doorbell we are looking for or not. However, the problem that the "found"
variable needs to be set to false at the start of each iteration,
otherwise after the first correct doorbell, then everything is marked as
found.
Reset the "found" to false at the start of the iteration and move the
variable inside the loop. |
| In the Linux kernel, the following vulnerability has been resolved:
firmware: arm_scmi: Fix OOB in scmi_power_name_get()
scmi_power_name_get() does not validate the domain number passed by the
external caller, which may lead to an out-of-bounds access.
Fix this by returning "unknown" for invalid domains, like
scmi_reset_name_get() does. |
| In the Linux kernel, the following vulnerability has been resolved:
ufs: core: tracing: Do not dereference pointers in TP_printk()
The trace events in drivers/ufs/core/ufs_trace.h were converted to take a
pointer to the hba structure as an argument for the tracepoint and then in
TP_printk() the printing of the dev_name from the ring buffer was
converted to using the dev dereferenced pointer from the hba saved
pointer.
This is not allowed as the TP_printk() is executed at the time the trace
event is read from /sys/kernel/tracing/trace file. That can happen
literally, seconds, minutes, hours, weeks, days, or even months later!
There is no guarantee that the hba pointer will still exist by the time it
is dereferenced when the "trace" file is read.
Instead, save the device name from the hba pointer at the time the
tracepoint is called and place it into the ring buffer event. Then the
TP_printk() can read the name directly from the ring buffer and remove the
possibility that it will read a freed pointer and crash the kernel.
This was detected when testing the trace event code that looks for
TP_printk() parameters doing illegal derferences[1]
[1] https://lore.kernel.org/all/20260630184836.74d477b6@gandalf.local.home/ |
| In the Linux kernel, the following vulnerability has been resolved:
perf tools: Use perf_env__get_cpu_topology() in machine__resolve()
machine__resolve() accesses env->cpu[al->cpu].socket_id after checking
al->cpu >= 0 and env->cpu != NULL, but without validating al->cpu
against env->nr_cpus_avail. Since al->cpu comes from the untrusted
perf.data sample, a crafted file with a large CPU index causes an
out-of-bounds heap read.
Use perf_env__get_cpu_topology() which validates both NULL and bounds.
Also bounds-check al->cpu before the cast to struct perf_cpu (int16_t):
without this, values like 65536 silently truncate to 0, bypassing the
accessor's internal check and returning CPU 0's topology. |
| In the Linux kernel, the following vulnerability has been resolved:
mm/util: don't read __page_2 for order-1 folios in snapshot_page()
snapshot_page() currently reads __page_2 after checking nr_pages > 1, but
it should only do so when nr_pages > 2.
If an order-1 folio is allocated at the end of a vmemmap section,
__page_2 will not exist and reading it will cause a fault.
During DLPAR memory remove on a 22 TB ppc64le LPAR, snapshot_page() oopsed
on the page isolation path while reading an order-1 folio's __page_2 from
an adjacent absent section (unmapped vmemmap).
Fix this to avoid reading memmap that doesn't exist (e.g., a vmemmap
hole). |
| In the Linux kernel, the following vulnerability has been resolved:
scsi: target: iblock: Fix wrong PR ops NULL check for PREEMPT/RELEASE
In the iblock_execute_pr_out() function, PRO_PREEMPT,
PRO_PREEMPT_AND_ABORT, and PRO_RELEASE all perform callback capability
checks through ops->pr_clear. The error check allows unimplemented hooks
to pass through the gate, resulting dereferencing a NULL function
pointer.
Check whether the hooks that need to be called are supported. |
| In the Linux kernel, the following vulnerability has been resolved:
net: ethernet: mtk_eth_soc: pass eth to mtk_handle_irq_rx in poll_controller
mtk_handle_irq_rx expects a struct mtk_eth * (matching the request_irq
cookie), but mtk_poll_controller incorrectly passed the net_device *.
Calling ndo_poll_controller with CONFIG_NET_POLL_CONTROLLER enabled
would then crash. |
| In the Linux kernel, the following vulnerability has been resolved:
mm/percpu-km: fix bitmap overflow and accounting in pcpu_create_chunk()
In pcpu_create_chunk(), nr_pages is the total contiguous backing
allocation, i.e., nr_units * pcpu_unit_pages, but pcpu_chunk_populated()
uses it to set chunk->populated, whose size is pcpu_unit_pages, bitmap.
Since bit N in chunk->populated means page offset N inside every unit is
backed. When nr_units > 1, the function writes beyond chunk->populated.
Fix it by using chunk->nr_pages.
It also fixes the global pcpu_nr_empty_pop_pages accounting, since
pcpu_balance_free() only iterates up to chunk->nr_pages.
Commit a63d4ac4ab609 ("percpu: make percpu-km set chunk->populated bitmap
properly") introduced the bitmap overflow issue. Later, commit
b539b87fed37f ("percpu: implmeent pcpu_nr_empty_pop_pages and
chunk->nr_populated") added pcpu_nr_empty_pop_pages and caused the
accounting issue. |
| In the Linux kernel, the following vulnerability has been resolved:
apparmor: fix potential UAF in aa_replace_profiles
The function aa_replace_profiles was accessing udata->size after calling
aa_put_loaddata(udata), causing a potential UAF.
Fixed this by saving the size to a local variable before dropping the
reference. |
| The User Profile Builder WordPress plugin before 4.0.1 does not validate the type of data being deserialized when importing a configuration file, allowing high privilege users such as administrators to conduct PHP Object Injection. The affected feature is a free add-on which is disabled by default, and no POP chain is present in the User Profile Builder WordPress plugin before 4.0.1 itself, so further impact requires a suitable gadget from another installed User Profile Builder WordPress plugin before 4.0.1 or . |
| In the Linux kernel, the following vulnerability has been resolved:
netfilter: nf_conntrack_irc: fix parse_dcc() off-by-one OOB read
parse_dcc() treats data_end as an inclusive end pointer, but its only
caller passes data_limit = ib_ptr + datalen, which points one past the
last valid byte.
The newline search loop iterates while tmp <= data_end, so when no
newline is present, *tmp is read at tmp == data_end, one byte beyond
the region filled by skb_header_pointer().
irc_buffer is kmalloc'd as MAX_SEARCH_SIZE + 1 bytes and datalen is
capped at MAX_SEARCH_SIZE, so the stray read does not fault. The byte
is uninitialized or stale; if it contains an ASCII digit, simple_strtoul
will consume it and produce a wrong DCC IP or port in the conntrack
expectation. The extra allocation byte is also a fragile guard: if the
cap or allocation size changes, this becomes a real out-of-bounds read.
Change the loop and its post-loop check to use strict less-than,
consistent with the caller's exclusive-end convention. Update the
function comment accordingly. |
| In the Linux kernel, the following vulnerability has been resolved:
tools/power/x86/intel-speed-select: Harden daemon pidfile open
Avoid symlink-based pidfile clobbering by opening the pidfile with
O_NOFOLLOW and validating it with fstat() before locking/writing.
The daemon currently uses a fixed pidfile path under /tmp. A local
unprivileged user can pre-create a symlink at that path and cause a
root-run daemon instance to write into an attacker-chosen file. |
| In the Linux kernel, the following vulnerability has been resolved:
f2fs: fix listxattr handling of corrupted xattr entries
Validate the xattr entry before reading its fields in f2fs_listxattr().
Return -EFSCORRUPTED when the entry is outside the valid xattr storage
area instead of returning a successful partial result. |
| In the Linux kernel, the following vulnerability has been resolved:
hwmon: (asus_atk0110) Check package count before accessing element
atk_ec_present() walks the management group package returned by the GGRP
ACPI method and, for each sub-package, reads its first element:
id = &obj->package.elements[0];
if (id->type != ACPI_TYPE_INTEGER)
without checking that the sub-package is non-empty. ACPICA allocates the
element array with exactly package.count entries, so for a sub-package
with a zero count this reads past the allocation.
The sibling function atk_debugfs_ggrp_open() performs the same access but
skips empty packages with a package.count check first. Add the same
check to atk_ec_present() so a malformed firmware package cannot trigger
an out-of-bounds read. |
| In the Linux kernel, the following vulnerability has been resolved:
batman-adv: dat: ensure accessible eth_hdr proto field
When batadv_get_vid() accesses the proto field of the ethernet header, it
is not checking if the data itself is accessible. The caller is responsible
for it. But in contrast to other call sites, batadv_dat_get_vid() and its
caller didn't make sure this is true. This could have caused an
out-of-bounds access. |
| In the Linux kernel, the following vulnerability has been resolved:
batman-adv: dat: acquire ARP hw source only after skb realloc
The pskb_may_pull() called by batadv_get_vid() could reallocate the buffer
behind the skb. Variables which were pointing to the old buffer need to be
reassigned to avoid an use-after-free. |
