| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| Issue summary: OpenSSL CMS decryption sizes the key-unwrap output buffer based
on querying the unwrapped key size, but the AES-WRAP-PAD unwrap primitive
can write and cleanse more bytes than that query reports, causing an 8-byte
out-of-bounds heap write.
Impact summary: An attacker who supplies a crafted CMS message can trigger a
deterministic 8-byte out-of-bounds heap write when the victim decrypts it
with CMS_decrypt(), corrupting the heap and typically resulting in a Denial
of Service.
CWE: CWE-787: Out-of-bounds Write
Description: The key-wrap OID is potentially attacker-controlled on the wire.
CMS unwrapping allows both id-aesNNN-wrap-pad and id-aesNNN-wrap ciphers.
An attacker can take a legitimate message and change a single OID byte to
select the padded variant while leaving the message otherwise valid. Since
the unwrap key is derived from the recipient's private operation (ECDH key
agreement or ML-KEM decapsulation), the RFC 5649 integrity check cannot
pass, and the decryption fails with integrity failure.
The write is a fixed-size (8-byte), fixed-value (zero) heap overflow
immediately past the allocation, requires no special configuration, and is
reachable from the public CMS_decrypt() function. The consequence is
a heap corruption leading to a Denial of Service. The fix in the CMS code
sizes the unwrap output buffer for the worst case so a failed unwrap cannot
write past the allocation.
FIPS impact: no
As the CMS code lives outside the FIPS module boundary, no FIPS
modules are affected by this CVE. |
| Issue summary: Receiving a DTLS record for a future epoch while a handshake
is in progress causes OpenSSL to buffer far more memory than the record
itself requires.
Impact summary: A peer can use a small amount of network traffic to make an
OpenSSL DTLS endpoint retain a disproportionately large amount of memory,
which may lead to a Denial of Service.
CWE: CWE-405: Asymmetric Resource Consumption (Amplification)
Description: While a DTLS handshake is in progress, a peer may legitimately
have already moved on to the next epoch (for example, having sent its
ChangeCipherSpec and Finished messages) before the local endpoint has
processed the same transition, typically because of reordering on the
underlying UDP transport. OpenSSL buffers such early records so that they
can be processed once the local endpoint catches up.
Buffering a record currently retains the entire read buffer it arrived in,
which is sized to hold the largest possible DTLS record (around 16
kilobytes), rather than just the bytes that make up the record itself. Up
to 100 such records may be buffered per connection. As a result, a peer
that sends a stream of small forged records claiming to belong to the next
epoch can cause an OpenSSL DTLS endpoint to retain around 1.7 megabytes of
memory, despite sending only a small fraction of that amount of data over
the network.
An attacker therefore gains a memory amplification factor of around 1200,
and can multiply the effect across as many associations as it is able to
open, making this a remote memory exhaustion Denial of Service risk for
DTLS servers. Since the memory retained per connection remains bounded,
and any limit an application already places on the number of concurrent
associations also bounds the total exposure, this issue has been assessed
as Low severity.
FIPS impact: no
No FIPS modules are affected by this issue as the affected code is outside
the OpenSSL FIPS module boundary.
OpenSSL 4.0, 3.6, 3.5, 3.4, 3.0, 1.1.1 and 1.0.2 are vulnerable to this
issue.
OpenSSL 4.0 users should upgrade to OpenSSL 4.0.2.
OpenSSL 3.6 users should upgrade to OpenSSL 3.6.4.
OpenSSL 3.5 users should upgrade to OpenSSL 3.5.8.
OpenSSL 3.4 users should upgrade to OpenSSL 3.4.7.
OpenSSL 3.0 users should upgrade to OpenSSL 3.0.22.
Premium support customers only:
OpenSSL 1.1.1 users should upgrade to OpenSSL 1.1.1zi
OpenSSL 1.0.2 users should upgrade to OpenSSL 1.0.2zr
This issue was reported on 18 May 2026 by Amazon Web Services.
The fix has been developed by Matt Caswell.
-- cut (non-publishing metadata for internal use) --
Reported by: Amazon Web Services
Fixed by: Matt Caswell |
| Issue summary: In a server or client configuration with RFC7250 Raw Public Keys (RPKs)
enabled, and only the private key (with no associated certificate) configured locally,
a NULL pointer dereference may occur when the remote peer solicits raw public keys and
also sends the typically omitted "signature_algorithms_cert" TLS extension.
Impact summary: The impact is limited to a possible Denial of Service as a result of
an application abort, no data disclosure or remote command execution are possible.
CWE: CWE-476: NULL Pointer Dereference
Description: While a passing comment in sample code in the documentation suggests
that key-only RPK configurations are supported, the best-practice RPK configuration
is to always configure a corresponding certificate (possibly self-signed or
signed by any convenient CA).
When the private key is configured along with a matching certificate, the
"signature_algorithms_cert" extension is handled reliably even without the
fix, and peer clients or servers that don't support raw public keys may be
able to complete a TLS connection by pinning or verifying the corresponding
certificate or its public key.
Deployments that prefer to configure just a private key with no certificate
need to upgrade to an updated release as noted below.
FIPS impact: no
No FIPS modules are affected by this issue, as the SSL protocol implementation
is outside the OpenSSL FIPS module boundary. |
| Issue summary: A specially crafted PKCS#7 or S/MIME signed message could
trigger a use-after-free during PKCS#7 signature verification.
Impact summary: A use-after-free may result in process crashes, heap
corruption, or potentially remote code execution.
When processing a PKCS#7 or S/MIME signed message, if the SignedData
digestAlgorithms field is present as an empty ASN.1 SET, OpenSSL may
incorrectly free a caller-owned BIO during PKCS7_verify(). A subsequent
use of the BIO by the calling application results in a use-after-free
condition.
In the common case this occurs when the application later calls
BIO_free() on the BIO originally passed to PKCS7_verify(). Depending
on allocator behavior and application-specific BIO usage patterns, this
may result in a crash or other memory corruption. In some application
contexts this may potentially be exploitable for remote code execution.
Applications that process PKCS#7 or S/MIME signed messages using OpenSSL
PKCS#7 APIs may be affected. Applications using the CMS APIs for this
processing are not affected.
The FIPS modules in 4.0, 3.6, 3.5, 3.4, and 3.0 are not affected by this
issue, as the affected code is outside the OpenSSL FIPS module boundary. |
| Issue summary: When an OpenSSL QUIC server (Listener SSL object) processes
valid QUIC Initial packets for unknown destination connection IDs, it
can allocate and queue new incoming channels without enforcing any limit.
Impact summary: A remote peer that can make many Initial packets reach the
server listener faster than the application accepts connections, can cause the
memory allocated to store the per-channel state to grow without any limits,
potentially making the QUIC listener unavailable and causing Denial of Service.
CWE: CWE-770: Allocation of Resources Without Limits or Throttling
Description: The function that handles inbound QUIC packets uses
Connection-Id from the packet header to find an existing connection
(QUIC channel). If no existing connection is found and the packet
type is INITIAL, the function treats the packet as a new connection. It
allocates a new channel object and inserts it into a queue where it
waits to be accepted by the local application with SSL_accept(3ossl).
The memory occupied by these initial channel objects may grow
without bounds if the application is not able to call SSL_accept()
frequently enough to serve these inbound connection requests.
The issue is present since OpenSSL 3.5 when the QUIC server implementation
was added.
The fix introduces a limit for pending connections. The default limit is set
to 256 pending connections (waiting to be accepted by the local application).
Applications may change the default by calling SSL_set_value_uint(3ossl).
FIPS impact: no
The FIPS module is not affected as the QUIC implementation is outside of
the OpenSSL FIPS module boundary. |
| Issue summary: A malicious TLS server can cause a memory leak in a TLS
client that has enabled OCSP response checking by sending an OCSP
response that contains no single response entries.
Impact summary: An attacker can leak an attacker-tunable amount of memory
per TLS handshake in a victim client application. A long-running client
that repeatedly connects to a malicious server can have its memory
exhausted, resulting in a Denial of Service.
CWE: CWE-401: Missing Release of Memory after Effective Lifetime
Description: The affected function is called during X.509 certificate
chain verification when OCSP response checking is enabled
with the X509_V_FLAG_OCSP_RESP_CHECK or X509_V_FLAG_OCSP_RESP_CHECK_ALL
verification flags, for example when a TLS client verifies an OCSP
response stapled into the TLS handshake by the server.
When the received BasicOCSPResponse contains an empty SEQUENCE OF
SingleResponse, which is permitted on the wire and accepted by the
OpenSSL decoder, the OCSP_BASICRESP structure allocated by
OCSP_response_get1_basic() was not freed because an early return
bypassed the cleanup code at the end of the function.
The amount of memory leaked per handshake can be amplified by the
attacker by padding the certs field of the BasicOCSPResponse with
bogus certificates, which are parsed and stored in the leaked
structure before the empty response check triggers the early return.
A long-running TLS client that repeatedly connects to a malicious
server can have its memory exhausted over time.
OCSP response checking is not enabled by default. Only client
applications that explicitly enable the OCSP response check
verification flags are affected.
FIPS impact: no
The FIPS modules in 4.0 and 3.6 are not affected by this issue as the
affected code is outside the OpenSSL FIPS module boundary. |
| Issue summary: When EVP_PKEY_derive_set_peer() is called with a DHX (X9.42)
peer key, the peer key is not properly checked for the subgroup membership.
Impact summary: A malicious peer which presents an X9.42 key carrying the
victim's p and g parameters, a forged q = r (a small prime factor of the
cofactor (p−1)/q_local), and a public value Y of order r can recover the
victim's private key after a small number of key exchange attempts.
When EVP_PKEY_derive_set_peer() is called with a DHX (X9.42) peer key, the
subgroup membership check Y^q ≡ 1 (mod p) is performed using the peer's
own q parameter, not the local key's q. The peer's domain parameters are
then matched against the domain parameters of the private key, but the value
of q is not compared.
A malicious peer who presents an X9.42 key carrying the victim's p, g,
a forged q = r (a small prime factor of the cofactor), and a public
value Y of order r passes all checks. The shared secret then takes only
r distinct values, leaking priv mod r. Repeating for each small-prime
factor of the cofactor and combining via CRT recovers the full private
key (Lim–Lee / small-subgroup-confinement attack).
The realistic attack surface is narrow: principally CMP deployments with
long-lived RA/CA DHX keys and bespoke enterprise or government applications
using X9.42 DHX static keys with interactive protocols and therefore this
issue was assigned Low severity.
The FIPS modules in 4.0, 3.6, 3.5, 3.4, 3.1.2 and 3.0 are affected by this
issue. |
| Issue summary: Applications performing certificate name checks (e.g., TLS
clients checking server certificates) may attempt to read an invalid memory
address resulting in abnormal termination of the application process.
Impact summary: Abnormal termination of an application can a cause a denial of
service.
Applications performing certificate name checks (e.g., TLS clients checking
server certificates) may attempt to read an invalid memory address when
comparing the expected name with an `otherName` subject alternative name of an
X.509 certificate. This may result in an exception that terminates the
application program.
Note that basic certificate chain validation (signatures, dates, ...) is not
affected, the denial of service can occur only when the application also
specifies an expected DNS name, Email address or IP address.
TLS servers rarely solicit client certificates, and even when they do, they
generally don't perform a name check against a reference identifier (expected
identity), but rather extract the presented identity after checking the
certificate chain. So TLS servers are generally not affected and the severity
of the issue is Moderate.
The FIPS modules in 3.3, 3.2, 3.1 and 3.0 are not affected by this issue. |
| Issue summary: When the X509_VERIFY_PARAM_set1_email is called by an
application to validate a crafted e-mail address, such as during S/MIME
message validation, an out of bounds read can happen.
Impact summary: This out of bounds read will not directly exfiltrate
the data read to the attacker so the most likely result is a crash and
a Denial of Service.
An internal helper function called from X509_VERIFY_PARAM_[set|add]_email()
used a wrong length when validating the local part of an email address.
This could cause the 64 octet limit on the local part of an email address
to be not enforced, or cause an out of bound read and potentially a crash.
The bug is reachable via S-MIME validation with a crafted From: address
supplied in an email message that can potentially cause a crash.
No FIPS modules are affected by this issue as the affected code is outside
the OpenSSL FIPS module boundary. |
| Issue summary: An attacker-controlled CMP (Certificate Management Protocol)
server could trigger a NULL pointer dereference in a CMP client application.
Impact summary: A NULL pointer dereference causes a crash of the
application and a Denial of Service.
An attacker controlling a CMP server (or acting as a man-in-the-middle) could
craft a CMP response containing a CRMF (Certificate Request Message Format)
CertRepMessage with an EncryptedValue structure where the symmAlg field
has an algorithm OID but no parameters field. When the OpenSSL CMP client
processes this response, the NULL dereference occurs, causing a crash of
the CMP client.
Applications that process untrusted CMP/CRMF messages may be affected.
The FIPS modules in 4.0, 3.6, 3.5, 3.4, and 3.0 are not affected by this
issue, as the affected code is outside the OpenSSL FIPS module boundary. |
| Issue summary: The CMS_decrypt and PKCS7_decrypt functions are vulnerable to
Bleichenbacher-style attack when an attacker is able to provide the CMS or
S/MIME messages and observe the error code and/or decryption output.
Impact summary: The Bleichenbacher-style attack allows an attacker to use the
victim's vulnerable application as a way to decrypt or sign messages with the
victim's private RSA key.
The attack is possible in 2 variants.
1. The decryption API (CMS_decrypt(), PKCS7_decrypt()) is used without
providing the recipient certificate. In this case OpenSSL iterates over every
KeyTransRecipientInfo (KTRI) without stopping at the first success.
An attacker who authors a message with two KTRI entries — the first one
wrapping a real CEK under the victim's public key, the second with an
arbitrary probe ciphertext — obtains opportunity to iterate the 2nd KTRI to
get a valid PKCS#1 v1.5 padding if the error code of the application is
available.
That is a Bleichenbacher oracle (Bleichenbacher, CRYPTO '98): an
adaptive-chosen-ciphertext side channel from which the attacker decrypts any
RSA ciphertext to the victim's key or forges any PKCS#1 v1.5 signature under
it.
2. When the decryption API (CMS_decrypt(), PKCS7_decrypt()) is provided with
the recipient certificate, and the recipient is not found, a random
key is substituted.
An attacker who authors a message and is able to compare both error code and
the result of the decryption, can mount a Bleichenbacher oracle.
We are not aware of any applications that provide a remote attacker
an opportunity to mount an attack described in these scenarios. We consider
the existence of such application very unlikely, and for this reason this
CVE has been evaluated as Low severity.
To avoid these attacks, when RSA PKCS#1 v1.5 Key Transport is in use, the
invoked EVP_PKEY_decrypt() will use the implicit rejection mechanism described
in draft-irtf-cfrg-rsa-guidance. In previous OpenSSL releases the implicit
rejection was explicitly disabled.
The implicit rejection mechanism always returns a plaintext value,
the symmetric key. This result is deterministic for the ciphertext and the
private key. The length of the decryption result can happen to match the
length of the key of the symmetric cipher that was used for the content
encryption. When a certificate is not provided, the last RecipientInfo
producing a key that looks valid will be used. It may cause getting garbage
content on decryption. As a proper way to deal with this a recipient
certificate has to be provided to identify the particular RecipientInfo for
decryption.
The FIPS modules in 4.0, 3.6, 3.5, and 3.4 are not affected by this issue, as
CMS and S/MIME processing happens outside the OpenSSL FIPS module boundary. |
| Issue summary: When an application drives an AES-OCB context through the
public EVP_Cipher() one-shot interface, the application-supplied
initialisation vector (IV) is silently discarded.
Impact summary: Every message encrypted under the same key uses the
same effective nonce regardless of the IV supplied by the caller,
resulting in (key, nonce) reuse and loss of confidentiality. If the
same code path is used to compute the authentication tag, the tag
depends only on the (key, IV) pair and not on the plaintext or
ciphertext, allowing universal forgery of arbitrary ciphertext from a
single captured message.
OpenSSL provides two ways to drive a cipher: the documented streaming
interface (EVP_CipherUpdate / EVP_CipherFinal_ex) and a lower-level
one-shot, EVP_Cipher(), whose documentation explicitly recommends
against use by applications in favour of EVP_CipherUpdate() and
EVP_CipherFinal_ex(). The OCB provider's streaming handler flushes
the application-supplied IV into the OCB context before processing
data; the one-shot handler did not. Every call to EVP_Cipher() on an
AES-OCB context therefore ran with the all-zero key-derived offset
state left by cipher initialisation, regardless of the caller's IV.
If EVP_EncryptFinal_ex() is subsequently used to obtain the
authentication tag, the deferred IV setup runs at that point and
clears the running checksum that should have been accumulated over the
plaintext. The resulting tag is a function of (key, IV) only and
verifies against any ciphertext produced under the same (key, IV)
pair.
The OpenSSL SSL/TLS implementation is not affected: AES-OCB is not a
TLS cipher suite, and libssl does not call EVP_Cipher() in any case.
Applications that drive AES-OCB through the documented streaming AEAD
API (EVP_CipherUpdate / EVP_CipherFinal_ex) are not affected. Only
applications that combine the AES-OCB cipher with the EVP_Cipher()
one-shot API are vulnerable.
The FIPS modules in 4.0, 3.6, 3.5, 3.4 and 3.0 are not affected by
this issue, as AES-OCB is outside the OpenSSL FIPS module boundary. |
| Issue summary: The implementations of AES-SIV (RFC 5297) and AES-GCM-SIV
(RFC 8452) mishandle the authentication of AAD (Additional Authenticated
Data) with an empty ciphertext allowing a forgery of such messages.
Impact summary: An attacker can forge empty messages with arbitrary AAD
to the victim's application using these ciphers.
AES-SIV (RFC 5297) and AES-GCM-SIV (RFC 8452) are nonce-misuse-resistant AEAD
modes: they accept a key, nonce, optional AAD (bytes that are authenticated
but not encrypted), and plaintext, and produces ciphertext plus a 16-byte
tag. On decrypt, `EVP_DecryptFinal_ex()` is documented to return success only
if the tag is verified succesfully.
In OpenSSL's provider implementation of these ciphers, the expected tag is
computed only when decryption function is invoked with non-empty data.
If the caller supplies AAD and then calls `EVP_DecryptFinal_ex()` without
invocation of the ciphertext update, which can happen when the received
ciphertext length is zero, the tag is never recalculated and still holds its
all-zeros value.
When AES-GCM-SIV is used, an attacker who sends arbitrary AAD, empty
ciphertext, and all-zeros tag passes authentication under any key they do not
know, single-shot. When AES-SIV is used, for mounting the attack it's
necessary for the application to reuse the decryption context without
resetting the key.
AES-SIV is implemented since OpenSSL 3.0. AES-GCM-SIV is implemented since
OpenSSL 3.2.
No protocols implemented in OpenSSL itself (TLS/CMS/PKCS7/HPKE/QUIC) support
either AES-GCM-SIV or AES-SIV. To mount an attack, the applications must
implement their own protocol and use the EVP interface. Also they must skip the
ciphertext update when a message with an empty ciphertext arrives.
The FIPS modules in 4.0, 3.6, 3.5, 3.4, and 3.0 are not affected by this
issue, as these algorithms are not FIPS approved and the affected code is
outside the OpenSSL FIPS module boundary. |
| Issue summary: A signed integer overflow when sizing the destination
buffer for Unicode output in ASN1_mbstring_ncopy() can lead to a heap
buffer overflow.
Impact summary: A heap buffer overflow may lead to a crash or possibly
attacker controlled code execution or other undefined behaviour.
In ASN1_mbstring_copy() and ASN1_mbstring_ncopy() the destination
size for Unicode output is computed in a signed int: by left shift
of the input character count for BMPSTRING (UTF-16) and
UNIVERSALSTRING (UTF-32), and by summing per-character byte counts
for UTF8STRING. The calculation overflows when the input reaches
around 2^30 characters. In the worst case (UNIVERSALSTRING at 2^30
characters) the size wraps to zero, OPENSSL_malloc(1) is called, and
the subsequent character copy writes several gigabytes past the
one-byte allocation.
X.509 certificate processing routes through ASN1_STRING_set_by_NID(),
whose DIRSTRING_TYPE mask excludes UNIVERSALSTRING and whose per-NID
size limits cap the input length; no network protocol or
certificate-handling path in OpenSSL exercises the overflow.
Triggering the bug requires an application that calls
ASN1_mbstring_copy() or ASN1_mbstring_ncopy() directly, or registers
a custom string type via ASN1_STRING_TABLE_add(), with
attacker-controlled input on the order of half a gigabyte or more.
For these reasons this issue was assigned Low severity.
The FIPS modules in 4.0, 3.6, 3.5, 3.4 and 3.0 are not affected by
this issue, as the affected code is outside the OpenSSL FIPS module
boundary. |
| Issue summary: When CMS password-based decryption (RFC 3211 / PWRI key unwrap)
processes attacker-supplied CMS data, an attacker-chosen stream-mode KEK
cipher can trigger a heap out-of-bounds read in kek_unwrap_key().
Impact summary: A heap buffer over-read may trigger a crash which leads to
Denial of Service for an application if the input buffer ends at a memory
page boundary and the following page is unmapped. There is no information
disclosure as the over-read bytes are not revealed to the attacker.
The key unwrapping function performs a check-byte test as specified in the
RFC that reads 7 bytes from a heap allocation that is based on the wrapped
key length from the message. There is a minimum length check based on the
block length of the wrapping cipher. However the cipher is selected from
an OID carried in the attacker's PWRI keyEncryptionAlgorithm with no
requirement that the cipher be a block cipher. When an attacker selects
a stream-mode cipher the guard will be ineffective and the allocated buffer
containing the unwrapped key can be too small to fit the check-bytes
specified in the RFC and a buffer over-read can happen.
Applications calling CMS_decrypt() or CMS_decrypt_set1_password()
(equivalently openssl cms -decrypt -pwri_password ...) on untrusted CMS
data are vulnerable to this issue. No password knowledge is required: the
over-read happens during the unwrap attempt before any authentication
succeeds.
The over-read is limited to a few bytes and is not written to output, so
there is no information disclosure. Triggering a crash requires the
allocation to border unmapped memory, which is unlikely with the normal
allocator.
The FIPS modules are not affected by this issue. |
| Issue Summary: An error in the callback used to verify the certificate
provided in a Root CA key update Certificate Management Protocol (CMP)
message response rendered the certificate validation ineffectual, which
could lead to escalation of credentials from the Registration Authority (RA)
level to the root Certification Authority (root CA) level.
Impact Summary: The Registration Autority could replace the root CA
certificate for the CMP clients with an arbitrary root CA certificate.
One of the parts of the Certificate Management Protocol (CMP), specified in
RFC 9810, is Root Certification Authority (root CA) key Rollover,
which is sent by the server in a message with type 'id-it-rootCaKeyUpdate'.
As part of these messages, 'newWithOld' certificate, the new root CA
certificate signed with the old root CA key, is provided, and verifying its
signature is crucial for transferring the trust from the old CA key to the
new one.
The 'id-it-rootCaKeyUpdate' messages are expected to be processed with
OSSL_CMP_get1_rootCaKeyUpdate(), that is expected to verify the 'newWithOld'
certificate. A typo in the certificate chain building code led to adding
an incorrect certificate ('newWithOld' instead of 'oldRoot') to the
certificate chain, rendering the certificate verification process ineffectual
(only the issuer name and the algorithm OIDs were verified by other parts
of the verification code).
An attacker who already has credentials that satisfy the CMP message
protection checks can generate a new key pair and use a crafted self-signed
certificate in its 'id-it-rootCaKeyUpdate' CMP messages which affected CMP
clients would accept as a new trust anchor.
Significant preconditions for the attack (having valid RA-level credentials)
are the reason the issue was assigned Low severity.
The FIPS modules are not affected by this issue, as the affected code is
outside the OpenSSL FIPS module boundary. |
| Issue summary: Receiving a QUIC initial packet with an invalid token may
trigger a NULL pointer dereference in the OpenSSL QUIC server with
address validation disabled.
Impact summary: NULL pointer dereference typically causes abnormal termination
of the affected QUIC server process and a Denial of Service.
If the address validation is disabled in the OpenSSL QUIC server
implementation, an attacker can crash the server by sending an initial
packet with an invalid or expired token.
By default, the client address validation is enabled in the OpenSSL QUIC server
implementation, which makes the default configuration not vulnerable
to this issue. However if the SSL_LISTENER_FLAG_NO_VALIDATE is used with
the SSL_new_listener() call, the address validation is disabled making the
vulnerable code reachable.
The FIPS modules in 4.0, 3.6, 3.5, 3.4, and 3.0 are not affected by this
issue, as the affected code is outside the OpenSSL FIPS module boundary. |
| Issue summary: A specially crafted password-encrypted CMS message
can trigger a NULL pointer dereference during CMS decryption.
Impact summary: This NULL pointer dereference leads to an application crash
and a Denial of Service.
The CMS PasswordRecipientInfo.keyDerivationAlgorithm field is defined as
OPTIONAL in the ASN.1 specification and may therefore be absent in specially
crafted inputs. During the password-based CMS decryption the OpenSSL
CMS implementation dereferences this field without first checking whether it
was present.
An attacker who supplies such a CMS message to an application performing
password-based CMS decryption can trigger an application crash, leading to
a Denial of Service.
Applications that process password-encrypted CMS messages may be affected.
The FIPS modules in 4.0, 3.6, 3.5, 3.4, and 3.0 are not affected by this
issue, as the affected code is outside the OpenSSL FIPS module boundary. |
| Issue summary: When a partial-chain certificate verification is enabled
together with OCSP response checking for the whole chain, a NULL dereference
will happen if the verified chain does not have a self-signed trusted anchor,
crashing the process.
Impact summary: A NULL pointer dereference can trigger a crash which leads to a
Denial of Service for an application.
When performing OCSP response checking for certificates in the verification
chain, the code always tries to access the next certificate as the issuer.
There is a check for a self-signed certificate. However with the partial
chain verification enabled when the chain does not have a self-signed trusted
anchor, the issuer will be NULL for the last certificate in the chain. A NULL
pointer dereference then happens.
This issue affects only applications which enable both OCSP verification
of the certificate chain (X509_V_FLAG_OCSP_RESP_CHECK_ALL) and partial
chain verification (X509_V_FLAG_PARTIAL_CHAIN) in the certificate
verification. Both flags are disabled by default. For that reason, we have
assigned Low severity to the issue.
No FIPS modules are affected by this issue as the affected code is outside
the OpenSSL FIPS module boundary. |
| Issue summary: Parsing a crafted DER-encoded ASN.1 structure with a primitive
element whose content exceeds 2 gigabytes in length may cause a heap buffer
over-read on 64-bit Unix and Unix-like platforms.
Impact summary: The heap buffer over-read may crash the application (Denial of
Service) or to load into the decoded ASN.1 object contents of memory beyond the
end of the input buffer. More typically such ASN.1 elements would instead be
truncated.
An integer truncation in OpenSSL's ASN.1 decoder causes the content length of
an ASN.1 primitive element to be mishandled when it exceeds 2 gigabytes. In the
worst case the truncated length is treated as a request to scan the binary
content for a terminating zero byte, possibly causing OpenSSL to read either
less than or beyond the end of the allocated buffer.
Applications that pass attacker-supplied data to d2i_X509(), d2i_PKCS7(), or
any other d2i_* decoding function are affected. OpenSSL's own command-line
tools are not vulnerable, as data read through the BIO layer is checked before
it reaches the affected code. The issue only affects 64-bit Unix and Unix-like
platforms; 32-bit platforms and 64-bit Windows are not affected.
The FIPS modules in 4.0, 3.6, 3.5, 3.4 and 3.0 are not affected by this issue,
as the affected code is outside the OpenSSL FIPS module boundary. |
