| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
sctp: set sk_state back to CLOSED if autobind fails in sctp_listen_start
In sctp_listen_start() invoked by sctp_inet_listen(), it should set the
sk_state back to CLOSED if sctp_autobind() fails due to whatever reason.
Otherwise, next time when calling sctp_inet_listen(), if sctp_sk(sk)->reuse
is already set via setsockopt(SCTP_REUSE_PORT), sctp_sk(sk)->bind_hash will
be dereferenced as sk_state is LISTENING, which causes a crash as bind_hash
is NULL.
KASAN: null-ptr-deref in range [0x0000000000000000-0x0000000000000007]
RIP: 0010:sctp_inet_listen+0x7f0/0xa20 net/sctp/socket.c:8617
Call Trace:
<TASK>
__sys_listen_socket net/socket.c:1883 [inline]
__sys_listen+0x1b7/0x230 net/socket.c:1894
__do_sys_listen net/socket.c:1902 [inline] |
| In the Linux kernel, the following vulnerability has been resolved:
blk_iocost: fix more out of bound shifts
Recently running UBSAN caught few out of bound shifts in the
ioc_forgive_debts() function:
UBSAN: shift-out-of-bounds in block/blk-iocost.c:2142:38
shift exponent 80 is too large for 64-bit type 'u64' (aka 'unsigned long
long')
...
UBSAN: shift-out-of-bounds in block/blk-iocost.c:2144:30
shift exponent 80 is too large for 64-bit type 'u64' (aka 'unsigned long
long')
...
Call Trace:
<IRQ>
dump_stack_lvl+0xca/0x130
__ubsan_handle_shift_out_of_bounds+0x22c/0x280
? __lock_acquire+0x6441/0x7c10
ioc_timer_fn+0x6cec/0x7750
? blk_iocost_init+0x720/0x720
? call_timer_fn+0x5d/0x470
call_timer_fn+0xfa/0x470
? blk_iocost_init+0x720/0x720
__run_timer_base+0x519/0x700
...
Actual impact of this issue was not identified but I propose to fix the
undefined behaviour.
The proposed fix to prevent those out of bound shifts consist of
precalculating exponent before using it the shift operations by taking
min value from the actual exponent and maximum possible number of bits. |
| In the Linux kernel, the following vulnerability has been resolved:
platform/x86: ISST: Fix the KASAN report slab-out-of-bounds bug
Attaching SST PCI device to VM causes "BUG: KASAN: slab-out-of-bounds".
kasan report:
[ 19.411889] ==================================================================
[ 19.413702] BUG: KASAN: slab-out-of-bounds in _isst_if_get_pci_dev+0x3d5/0x400 [isst_if_common]
[ 19.415634] Read of size 8 at addr ffff888829e65200 by task cpuhp/16/113
[ 19.417368]
[ 19.418627] CPU: 16 PID: 113 Comm: cpuhp/16 Tainted: G E 6.9.0 #10
[ 19.420435] Hardware name: VMware, Inc. VMware20,1/440BX Desktop Reference Platform, BIOS VMW201.00V.20192059.B64.2207280713 07/28/2022
[ 19.422687] Call Trace:
[ 19.424091] <TASK>
[ 19.425448] dump_stack_lvl+0x5d/0x80
[ 19.426963] ? _isst_if_get_pci_dev+0x3d5/0x400 [isst_if_common]
[ 19.428694] print_report+0x19d/0x52e
[ 19.430206] ? __pfx__raw_spin_lock_irqsave+0x10/0x10
[ 19.431837] ? _isst_if_get_pci_dev+0x3d5/0x400 [isst_if_common]
[ 19.433539] kasan_report+0xf0/0x170
[ 19.435019] ? _isst_if_get_pci_dev+0x3d5/0x400 [isst_if_common]
[ 19.436709] _isst_if_get_pci_dev+0x3d5/0x400 [isst_if_common]
[ 19.438379] ? __pfx_sched_clock_cpu+0x10/0x10
[ 19.439910] isst_if_cpu_online+0x406/0x58f [isst_if_common]
[ 19.441573] ? __pfx_isst_if_cpu_online+0x10/0x10 [isst_if_common]
[ 19.443263] ? ttwu_queue_wakelist+0x2c1/0x360
[ 19.444797] cpuhp_invoke_callback+0x221/0xec0
[ 19.446337] cpuhp_thread_fun+0x21b/0x610
[ 19.447814] ? __pfx_cpuhp_thread_fun+0x10/0x10
[ 19.449354] smpboot_thread_fn+0x2e7/0x6e0
[ 19.450859] ? __pfx_smpboot_thread_fn+0x10/0x10
[ 19.452405] kthread+0x29c/0x350
[ 19.453817] ? __pfx_kthread+0x10/0x10
[ 19.455253] ret_from_fork+0x31/0x70
[ 19.456685] ? __pfx_kthread+0x10/0x10
[ 19.458114] ret_from_fork_asm+0x1a/0x30
[ 19.459573] </TASK>
[ 19.460853]
[ 19.462055] Allocated by task 1198:
[ 19.463410] kasan_save_stack+0x30/0x50
[ 19.464788] kasan_save_track+0x14/0x30
[ 19.466139] __kasan_kmalloc+0xaa/0xb0
[ 19.467465] __kmalloc+0x1cd/0x470
[ 19.468748] isst_if_cdev_register+0x1da/0x350 [isst_if_common]
[ 19.470233] isst_if_mbox_init+0x108/0xff0 [isst_if_mbox_msr]
[ 19.471670] do_one_initcall+0xa4/0x380
[ 19.472903] do_init_module+0x238/0x760
[ 19.474105] load_module+0x5239/0x6f00
[ 19.475285] init_module_from_file+0xd1/0x130
[ 19.476506] idempotent_init_module+0x23b/0x650
[ 19.477725] __x64_sys_finit_module+0xbe/0x130
[ 19.476506] idempotent_init_module+0x23b/0x650
[ 19.477725] __x64_sys_finit_module+0xbe/0x130
[ 19.478920] do_syscall_64+0x82/0x160
[ 19.480036] entry_SYSCALL_64_after_hwframe+0x76/0x7e
[ 19.481292]
[ 19.482205] The buggy address belongs to the object at ffff888829e65000
which belongs to the cache kmalloc-512 of size 512
[ 19.484818] The buggy address is located 0 bytes to the right of
allocated 512-byte region [ffff888829e65000, ffff888829e65200)
[ 19.487447]
[ 19.488328] The buggy address belongs to the physical page:
[ 19.489569] page: refcount:1 mapcount:0 mapping:0000000000000000 index:0xffff888829e60c00 pfn:0x829e60
[ 19.491140] head: order:3 entire_mapcount:0 nr_pages_mapped:0 pincount:0
[ 19.492466] anon flags: 0x57ffffc0000840(slab|head|node=1|zone=2|lastcpupid=0x1fffff)
[ 19.493914] page_type: 0xffffffff()
[ 19.494988] raw: 0057ffffc0000840 ffff88810004cc80 0000000000000000 0000000000000001
[ 19.496451] raw: ffff888829e60c00 0000000080200018 00000001ffffffff 0000000000000000
[ 19.497906] head: 0057ffffc0000840 ffff88810004cc80 0000000000000000 0000000000000001
[ 19.499379] head: ffff888829e60c00 0000000080200018 00000001ffffffff 0000000000000000
[ 19.500844] head: 0057ffffc0000003 ffffea0020a79801 ffffea0020a79848 00000000ffffffff
[ 19.502316] head: 0000000800000000 0000000000000000 00000000ffffffff 0000000000000000
[ 19.503784] page dumped because: k
---truncated--- |
| In the Linux kernel, the following vulnerability has been resolved:
resource: fix region_intersects() vs add_memory_driver_managed()
On a system with CXL memory, the resource tree (/proc/iomem) related to
CXL memory may look like something as follows.
490000000-50fffffff : CXL Window 0
490000000-50fffffff : region0
490000000-50fffffff : dax0.0
490000000-50fffffff : System RAM (kmem)
Because drivers/dax/kmem.c calls add_memory_driver_managed() during
onlining CXL memory, which makes "System RAM (kmem)" a descendant of "CXL
Window X". This confuses region_intersects(), which expects all "System
RAM" resources to be at the top level of iomem_resource. This can lead to
bugs.
For example, when the following command line is executed to write some
memory in CXL memory range via /dev/mem,
$ dd if=data of=/dev/mem bs=$((1 << 10)) seek=$((0x490000000 >> 10)) count=1
dd: error writing '/dev/mem': Bad address
1+0 records in
0+0 records out
0 bytes copied, 0.0283507 s, 0.0 kB/s
the command fails as expected. However, the error code is wrong. It
should be "Operation not permitted" instead of "Bad address". More
seriously, the /dev/mem permission checking in devmem_is_allowed() passes
incorrectly. Although the accessing is prevented later because ioremap()
isn't allowed to map system RAM, it is a potential security issue. During
command executing, the following warning is reported in the kernel log for
calling ioremap() on system RAM.
ioremap on RAM at 0x0000000490000000 - 0x0000000490000fff
WARNING: CPU: 2 PID: 416 at arch/x86/mm/ioremap.c:216 __ioremap_caller.constprop.0+0x131/0x35d
Call Trace:
memremap+0xcb/0x184
xlate_dev_mem_ptr+0x25/0x2f
write_mem+0x94/0xfb
vfs_write+0x128/0x26d
ksys_write+0xac/0xfe
do_syscall_64+0x9a/0xfd
entry_SYSCALL_64_after_hwframe+0x4b/0x53
The details of command execution process are as follows. In the above
resource tree, "System RAM" is a descendant of "CXL Window 0" instead of a
top level resource. So, region_intersects() will report no System RAM
resources in the CXL memory region incorrectly, because it only checks the
top level resources. Consequently, devmem_is_allowed() will return 1
(allow access via /dev/mem) for CXL memory region incorrectly.
Fortunately, ioremap() doesn't allow to map System RAM and reject the
access.
So, region_intersects() needs to be fixed to work correctly with the
resource tree with "System RAM" not at top level as above. To fix it, if
we found a unmatched resource in the top level, we will continue to search
matched resources in its descendant resources. So, we will not miss any
matched resources in resource tree anymore.
In the new implementation, an example resource tree
|------------- "CXL Window 0" ------------|
|-- "System RAM" --|
will behave similar as the following fake resource tree for
region_intersects(, IORESOURCE_SYSTEM_RAM, ),
|-- "System RAM" --||-- "CXL Window 0a" --|
Where "CXL Window 0a" is part of the original "CXL Window 0" that
isn't covered by "System RAM". |
| In the Linux kernel, the following vulnerability has been resolved:
f2fs: Require FMODE_WRITE for atomic write ioctls
The F2FS ioctls for starting and committing atomic writes check for
inode_owner_or_capable(), but this does not give LSMs like SELinux or
Landlock an opportunity to deny the write access - if the caller's FSUID
matches the inode's UID, inode_owner_or_capable() immediately returns true.
There are scenarios where LSMs want to deny a process the ability to write
particular files, even files that the FSUID of the process owns; but this
can currently partially be bypassed using atomic write ioctls in two ways:
- F2FS_IOC_START_ATOMIC_REPLACE + F2FS_IOC_COMMIT_ATOMIC_WRITE can
truncate an inode to size 0
- F2FS_IOC_START_ATOMIC_WRITE + F2FS_IOC_ABORT_ATOMIC_WRITE can revert
changes another process concurrently made to a file
Fix it by requiring FMODE_WRITE for these operations, just like for
F2FS_IOC_MOVE_RANGE. Since any legitimate caller should only be using these
ioctls when intending to write into the file, that seems unlikely to break
anything. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: mac80211: don't use rate mask for offchannel TX either
Like the commit ab9177d83c04 ("wifi: mac80211: don't use rate mask for
scanning"), ignore incorrect settings to avoid no supported rate warning
reported by syzbot.
The syzbot did bisect and found cause is commit 9df66d5b9f45 ("cfg80211:
fix default HE tx bitrate mask in 2G band"), which however corrects
bitmask of HE MCS and recognizes correctly settings of empty legacy rate
plus HE MCS rate instead of returning -EINVAL.
As suggestions [1], follow the change of SCAN TX to consider this case of
offchannel TX as well.
[1] https://lore.kernel.org/linux-wireless/6ab2dc9c3afe753ca6fdcdd1421e7a1f47e87b84.camel@sipsolutions.net/T/#m2ac2a6d2be06a37c9c47a3d8a44b4f647ed4f024 |
| In the Linux kernel, the following vulnerability has been resolved:
bonding: Fix unnecessary warnings and logs from bond_xdp_get_xmit_slave()
syzbot reported a WARNING in bond_xdp_get_xmit_slave. To reproduce
this[1], one bond device (bond1) has xdpdrv, which increases
bpf_master_redirect_enabled_key. Another bond device (bond0) which is
unsupported by XDP but its slave (veth3) has xdpgeneric that returns
XDP_TX. This triggers WARN_ON_ONCE() from the xdp_master_redirect().
To reduce unnecessary warnings and improve log management, we need to
delete the WARN_ON_ONCE() and add ratelimit to the netdev_err().
[1] Steps to reproduce:
# Needs tx_xdp with return XDP_TX;
ip l add veth0 type veth peer veth1
ip l add veth3 type veth peer veth4
ip l add bond0 type bond mode 6 # BOND_MODE_ALB, unsupported by XDP
ip l add bond1 type bond # BOND_MODE_ROUNDROBIN by default
ip l set veth0 master bond1
ip l set bond1 up
# Increases bpf_master_redirect_enabled_key
ip l set dev bond1 xdpdrv object tx_xdp.o section xdp_tx
ip l set veth3 master bond0
ip l set bond0 up
ip l set veth4 up
# Triggers WARN_ON_ONCE() from the xdp_master_redirect()
ip l set veth3 xdpgeneric object tx_xdp.o section xdp_tx |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: mac80211: use two-phase skb reclamation in ieee80211_do_stop()
Since '__dev_queue_xmit()' should be called with interrupts enabled,
the following backtrace:
ieee80211_do_stop()
...
spin_lock_irqsave(&local->queue_stop_reason_lock, flags)
...
ieee80211_free_txskb()
ieee80211_report_used_skb()
ieee80211_report_ack_skb()
cfg80211_mgmt_tx_status_ext()
nl80211_frame_tx_status()
genlmsg_multicast_netns()
genlmsg_multicast_netns_filtered()
nlmsg_multicast_filtered()
netlink_broadcast_filtered()
do_one_broadcast()
netlink_broadcast_deliver()
__netlink_sendskb()
netlink_deliver_tap()
__netlink_deliver_tap_skb()
dev_queue_xmit()
__dev_queue_xmit() ; with IRQS disabled
...
spin_unlock_irqrestore(&local->queue_stop_reason_lock, flags)
issues the warning (as reported by syzbot reproducer):
WARNING: CPU: 2 PID: 5128 at kernel/softirq.c:362 __local_bh_enable_ip+0xc3/0x120
Fix this by implementing a two-phase skb reclamation in
'ieee80211_do_stop()', where actual work is performed
outside of a section with interrupts disabled. |
| In the Linux kernel, the following vulnerability has been resolved:
sock_map: Add a cond_resched() in sock_hash_free()
Several syzbot soft lockup reports all have in common sock_hash_free()
If a map with a large number of buckets is destroyed, we need to yield
the cpu when needed. |
| In the Linux kernel, the following vulnerability has been resolved:
can: bcm: Clear bo->bcm_proc_read after remove_proc_entry().
syzbot reported a warning in bcm_release(). [0]
The blamed change fixed another warning that is triggered when
connect() is issued again for a socket whose connect()ed device has
been unregistered.
However, if the socket is just close()d without the 2nd connect(), the
remaining bo->bcm_proc_read triggers unnecessary remove_proc_entry()
in bcm_release().
Let's clear bo->bcm_proc_read after remove_proc_entry() in bcm_notify().
[0]
name '4986'
WARNING: CPU: 0 PID: 5234 at fs/proc/generic.c:711 remove_proc_entry+0x2e7/0x5d0 fs/proc/generic.c:711
Modules linked in:
CPU: 0 UID: 0 PID: 5234 Comm: syz-executor606 Not tainted 6.11.0-rc5-syzkaller-00178-g5517ae241919 #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 08/06/2024
RIP: 0010:remove_proc_entry+0x2e7/0x5d0 fs/proc/generic.c:711
Code: ff eb 05 e8 cb 1e 5e ff 48 8b 5c 24 10 48 c7 c7 e0 f7 aa 8e e8 2a 38 8e 09 90 48 c7 c7 60 3a 1b 8c 48 89 de e8 da 42 20 ff 90 <0f> 0b 90 90 48 8b 44 24 18 48 c7 44 24 40 0e 36 e0 45 49 c7 04 07
RSP: 0018:ffffc9000345fa20 EFLAGS: 00010246
RAX: 2a2d0aee2eb64600 RBX: ffff888032f1f548 RCX: ffff888029431e00
RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000000000000
RBP: ffffc9000345fb08 R08: ffffffff8155b2f2 R09: 1ffff1101710519a
R10: dffffc0000000000 R11: ffffed101710519b R12: ffff888011d38640
R13: 0000000000000004 R14: 0000000000000000 R15: dffffc0000000000
FS: 0000000000000000(0000) GS:ffff8880b8800000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007fcfb52722f0 CR3: 000000000e734000 CR4: 00000000003506f0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
<TASK>
bcm_release+0x250/0x880 net/can/bcm.c:1578
__sock_release net/socket.c:659 [inline]
sock_close+0xbc/0x240 net/socket.c:1421
__fput+0x24a/0x8a0 fs/file_table.c:422
task_work_run+0x24f/0x310 kernel/task_work.c:228
exit_task_work include/linux/task_work.h:40 [inline]
do_exit+0xa2f/0x27f0 kernel/exit.c:882
do_group_exit+0x207/0x2c0 kernel/exit.c:1031
__do_sys_exit_group kernel/exit.c:1042 [inline]
__se_sys_exit_group kernel/exit.c:1040 [inline]
__x64_sys_exit_group+0x3f/0x40 kernel/exit.c:1040
x64_sys_call+0x2634/0x2640 arch/x86/include/generated/asm/syscalls_64.h:232
do_syscall_x64 arch/x86/entry/common.c:52 [inline]
do_syscall_64+0xf3/0x230 arch/x86/entry/common.c:83
entry_SYSCALL_64_after_hwframe+0x77/0x7f
RIP: 0033:0x7fcfb51ee969
Code: Unable to access opcode bytes at 0x7fcfb51ee93f.
RSP: 002b:00007ffce0109ca8 EFLAGS: 00000246 ORIG_RAX: 00000000000000e7
RAX: ffffffffffffffda RBX: 0000000000000001 RCX: 00007fcfb51ee969
RDX: 000000000000003c RSI: 00000000000000e7 RDI: 0000000000000001
RBP: 00007fcfb526f3b0 R08: ffffffffffffffb8 R09: 0000555500000000
R10: 0000555500000000 R11: 0000000000000246 R12: 00007fcfb526f3b0
R13: 0000000000000000 R14: 00007fcfb5271ee0 R15: 00007fcfb51bf160
</TASK> |
| In the Linux kernel, the following vulnerability has been resolved:
f2fs: get rid of online repaire on corrupted directory
syzbot reports a f2fs bug as below:
kernel BUG at fs/f2fs/inode.c:896!
RIP: 0010:f2fs_evict_inode+0x1598/0x15c0 fs/f2fs/inode.c:896
Call Trace:
evict+0x532/0x950 fs/inode.c:704
dispose_list fs/inode.c:747 [inline]
evict_inodes+0x5f9/0x690 fs/inode.c:797
generic_shutdown_super+0x9d/0x2d0 fs/super.c:627
kill_block_super+0x44/0x90 fs/super.c:1696
kill_f2fs_super+0x344/0x690 fs/f2fs/super.c:4898
deactivate_locked_super+0xc4/0x130 fs/super.c:473
cleanup_mnt+0x41f/0x4b0 fs/namespace.c:1373
task_work_run+0x24f/0x310 kernel/task_work.c:228
ptrace_notify+0x2d2/0x380 kernel/signal.c:2402
ptrace_report_syscall include/linux/ptrace.h:415 [inline]
ptrace_report_syscall_exit include/linux/ptrace.h:477 [inline]
syscall_exit_work+0xc6/0x190 kernel/entry/common.c:173
syscall_exit_to_user_mode_prepare kernel/entry/common.c:200 [inline]
__syscall_exit_to_user_mode_work kernel/entry/common.c:205 [inline]
syscall_exit_to_user_mode+0x279/0x370 kernel/entry/common.c:218
do_syscall_64+0x100/0x230 arch/x86/entry/common.c:89
entry_SYSCALL_64_after_hwframe+0x77/0x7f
RIP: 0010:f2fs_evict_inode+0x1598/0x15c0 fs/f2fs/inode.c:896
Online repaire on corrupted directory in f2fs_lookup() can generate
dirty data/meta while racing w/ readonly remount, it may leave dirty
inode after filesystem becomes readonly, however, checkpoint() will
skips flushing dirty inode in a state of readonly mode, result in
above panic.
Let's get rid of online repaire in f2fs_lookup(), and leave the work
to fsck.f2fs. |
| In the Linux kernel, the following vulnerability has been resolved:
USB: usbtmc: prevent kernel-usb-infoleak
The syzbot reported a kernel-usb-infoleak in usbtmc_write,
we need to clear the structure before filling fields. |
| In the Linux kernel, the following vulnerability has been resolved:
nilfs2: fix state management in error path of log writing function
After commit a694291a6211 ("nilfs2: separate wait function from
nilfs_segctor_write") was applied, the log writing function
nilfs_segctor_do_construct() was able to issue I/O requests continuously
even if user data blocks were split into multiple logs across segments,
but two potential flaws were introduced in its error handling.
First, if nilfs_segctor_begin_construction() fails while creating the
second or subsequent logs, the log writing function returns without
calling nilfs_segctor_abort_construction(), so the writeback flag set on
pages/folios will remain uncleared. This causes page cache operations to
hang waiting for the writeback flag. For example,
truncate_inode_pages_final(), which is called via nilfs_evict_inode() when
an inode is evicted from memory, will hang.
Second, the NILFS_I_COLLECTED flag set on normal inodes remain uncleared.
As a result, if the next log write involves checkpoint creation, that's
fine, but if a partial log write is performed that does not, inodes with
NILFS_I_COLLECTED set are erroneously removed from the "sc_dirty_files"
list, and their data and b-tree blocks may not be written to the device,
corrupting the block mapping.
Fix these issues by uniformly calling nilfs_segctor_abort_construction()
on failure of each step in the loop in nilfs_segctor_do_construct(),
having it clean up logs and segment usages according to progress, and
correcting the conditions for calling nilfs_redirty_inodes() to ensure
that the NILFS_I_COLLECTED flag is cleared. |
| In the Linux kernel, the following vulnerability has been resolved:
i3c: mipi-i3c-hci: Error out instead on BUG_ON() in IBI DMA setup
Definitely condition dma_get_cache_alignment * defined value > 256
during driver initialization is not reason to BUG_ON(). Turn that to
graceful error out with -EINVAL. |
| CUPS is a standards-based, open-source printing system, and `libppd` can be used for legacy PPD file support. The `libppd` function `ppdCreatePPDFromIPP2` does not sanitize IPP attributes when creating the PPD buffer. When used in combination with other functions such as `cfGetPrinterAttributes5`, can result in user controlled input and ultimately code execution via Foomatic. This vulnerability can be part of an exploit chain leading to remote code execution (RCE), as described in CVE-2024-47176. |
| CUPS is a standards-based, open-source printing system, and `libcupsfilters` contains the code of the filters of the former `cups-filters` package as library functions to be used for the data format conversion tasks needed in Printer Applications. The `cfGetPrinterAttributes5` function in `libcupsfilters` does not sanitize IPP attributes returned from an IPP server. When these IPP attributes are used, for instance, to generate a PPD file, this can lead to attacker controlled data to be provided to the rest of the CUPS system. |
| In the Linux kernel, the following vulnerability has been resolved:
net: dpaa: Pad packets to ETH_ZLEN
When sending packets under 60 bytes, up to three bytes of the buffer
following the data may be leaked. Avoid this by extending all packets to
ETH_ZLEN, ensuring nothing is leaked in the padding. This bug can be
reproduced by running
$ ping -s 11 destination |
| In the Linux kernel, the following vulnerability has been resolved:
perf/x86/intel: Limit the period on Haswell
Running the ltp test cve-2015-3290 concurrently reports the following
warnings.
perfevents: irq loop stuck!
WARNING: CPU: 31 PID: 32438 at arch/x86/events/intel/core.c:3174
intel_pmu_handle_irq+0x285/0x370
Call Trace:
<NMI>
? __warn+0xa4/0x220
? intel_pmu_handle_irq+0x285/0x370
? __report_bug+0x123/0x130
? intel_pmu_handle_irq+0x285/0x370
? __report_bug+0x123/0x130
? intel_pmu_handle_irq+0x285/0x370
? report_bug+0x3e/0xa0
? handle_bug+0x3c/0x70
? exc_invalid_op+0x18/0x50
? asm_exc_invalid_op+0x1a/0x20
? irq_work_claim+0x1e/0x40
? intel_pmu_handle_irq+0x285/0x370
perf_event_nmi_handler+0x3d/0x60
nmi_handle+0x104/0x330
Thanks to Thomas Gleixner's analysis, the issue is caused by the low
initial period (1) of the frequency estimation algorithm, which triggers
the defects of the HW, specifically erratum HSW11 and HSW143. (For the
details, please refer https://lore.kernel.org/lkml/87plq9l5d2.ffs@tglx/)
The HSW11 requires a period larger than 100 for the INST_RETIRED.ALL
event, but the initial period in the freq mode is 1. The erratum is the
same as the BDM11, which has been supported in the kernel. A minimum
period of 128 is enforced as well on HSW.
HSW143 is regarding that the fixed counter 1 may overcount 32 with the
Hyper-Threading is enabled. However, based on the test, the hardware
has more issues than it tells. Besides the fixed counter 1, the message
'interrupt took too long' can be observed on any counter which was armed
with a period < 32 and two events expired in the same NMI. A minimum
period of 32 is enforced for the rest of the events.
The recommended workaround code of the HSW143 is not implemented.
Because it only addresses the issue for the fixed counter. It brings
extra overhead through extra MSR writing. No related overcounting issue
has been reported so far. |
| In the Linux kernel, the following vulnerability has been resolved:
spi: rockchip: Resolve unbalanced runtime PM / system PM handling
Commit e882575efc77 ("spi: rockchip: Suspend and resume the bus during
NOIRQ_SYSTEM_SLEEP_PM ops") stopped respecting runtime PM status and
simply disabled clocks unconditionally when suspending the system. This
causes problems when the device is already runtime suspended when we go
to sleep -- in which case we double-disable clocks and produce a
WARNing.
Switch back to pm_runtime_force_{suspend,resume}(), because that still
seems like the right thing to do, and the aforementioned commit makes no
explanation why it stopped using it.
Also, refactor some of the resume() error handling, because it's not
actually a good idea to re-disable clocks on failure. |
| In the Linux kernel, the following vulnerability has been resolved:
sched: sch_cake: fix bulk flow accounting logic for host fairness
In sch_cake, we keep track of the count of active bulk flows per host,
when running in dst/src host fairness mode, which is used as the
round-robin weight when iterating through flows. The count of active
bulk flows is updated whenever a flow changes state.
This has a peculiar interaction with the hash collision handling: when a
hash collision occurs (after the set-associative hashing), the state of
the hash bucket is simply updated to match the new packet that collided,
and if host fairness is enabled, that also means assigning new per-host
state to the flow. For this reason, the bulk flow counters of the
host(s) assigned to the flow are decremented, before new state is
assigned (and the counters, which may not belong to the same host
anymore, are incremented again).
Back when this code was introduced, the host fairness mode was always
enabled, so the decrement was unconditional. When the configuration
flags were introduced the *increment* was made conditional, but
the *decrement* was not. Which of course can lead to a spurious
decrement (and associated wrap-around to U16_MAX).
AFAICT, when host fairness is disabled, the decrement and wrap-around
happens as soon as a hash collision occurs (which is not that common in
itself, due to the set-associative hashing). However, in most cases this
is harmless, as the value is only used when host fairness mode is
enabled. So in order to trigger an array overflow, sch_cake has to first
be configured with host fairness disabled, and while running in this
mode, a hash collision has to occur to cause the overflow. Then, the
qdisc has to be reconfigured to enable host fairness, which leads to the
array out-of-bounds because the wrapped-around value is retained and
used as an array index. It seems that syzbot managed to trigger this,
which is quite impressive in its own right.
This patch fixes the issue by introducing the same conditional check on
decrement as is used on increment.
The original bug predates the upstreaming of cake, but the commit listed
in the Fixes tag touched that code, meaning that this patch won't apply
before that. |
