Export limit exceeded: 12382 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (18632 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2023-53796 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: f2fs: fix information leak in f2fs_move_inline_dirents() When converting an inline directory to a regular one, f2fs is leaking uninitialized memory to disk because it doesn't initialize the entire directory block. Fix this by zero-initializing the block. This bug was introduced by commit 4ec17d688d74 ("f2fs: avoid unneeded initializing when converting inline dentry"), which didn't consider the security implications of leaking uninitialized memory to disk. This was found by running xfstest generic/435 on a KMSAN-enabled kernel. | ||||
| CVE-2025-68220 | 1 Linux | 1 Linux Kernel | 2026-04-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: net: ethernet: ti: netcp: Standardize knav_dma_open_channel to return NULL on error Make knav_dma_open_channel consistently return NULL on error instead of ERR_PTR. Currently the header include/linux/soc/ti/knav_dma.h returns NULL when the driver is disabled, but the driver implementation does not even return NULL or ERR_PTR on failure, causing inconsistency in the users. This results in a crash in netcp_free_navigator_resources as followed (trimmed): Unhandled fault: alignment exception (0x221) at 0xfffffff2 [fffffff2] *pgd=80000800207003, *pmd=82ffda003, *pte=00000000 Internal error: : 221 [#1] SMP ARM Modules linked in: CPU: 0 UID: 0 PID: 1 Comm: swapper/0 Not tainted 6.17.0-rc7 #1 NONE Hardware name: Keystone PC is at knav_dma_close_channel+0x30/0x19c LR is at netcp_free_navigator_resources+0x2c/0x28c [... TRIM...] Call trace: knav_dma_close_channel from netcp_free_navigator_resources+0x2c/0x28c netcp_free_navigator_resources from netcp_ndo_open+0x430/0x46c netcp_ndo_open from __dev_open+0x114/0x29c __dev_open from __dev_change_flags+0x190/0x208 __dev_change_flags from netif_change_flags+0x1c/0x58 netif_change_flags from dev_change_flags+0x38/0xa0 dev_change_flags from ip_auto_config+0x2c4/0x11f0 ip_auto_config from do_one_initcall+0x58/0x200 do_one_initcall from kernel_init_freeable+0x1cc/0x238 kernel_init_freeable from kernel_init+0x1c/0x12c kernel_init from ret_from_fork+0x14/0x38 [... TRIM...] Standardize the error handling by making the function return NULL on all error conditions. The API is used in just the netcp_core.c so the impact is limited. Note, this change, in effect reverts commit 5b6cb43b4d62 ("net: ethernet: ti: netcp_core: return error while dma channel open issue"), but provides a less error prone implementation. | ||||
| CVE-2023-54291 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: vduse: fix NULL pointer dereference vduse_vdpa_set_vq_affinity callback can be called with NULL value as cpu_mask when deleting the vduse device. This patch resets virtqueue's IRQ affinity mask value to set all CPUs instead of dereferencing NULL cpu_mask. [ 4760.952149] BUG: kernel NULL pointer dereference, address: 0000000000000000 [ 4760.959110] #PF: supervisor read access in kernel mode [ 4760.964247] #PF: error_code(0x0000) - not-present page [ 4760.969385] PGD 0 P4D 0 [ 4760.971927] Oops: 0000 [#1] PREEMPT SMP PTI [ 4760.976112] CPU: 13 PID: 2346 Comm: vdpa Not tainted 6.4.0-rc6+ #4 [ 4760.982291] Hardware name: Dell Inc. PowerEdge R640/0W23H8, BIOS 2.8.1 06/26/2020 [ 4760.989769] RIP: 0010:memcpy_orig+0xc5/0x130 [ 4760.994049] Code: 16 f8 4c 89 07 4c 89 4f 08 4c 89 54 17 f0 4c 89 5c 17 f8 c3 cc cc cc cc 66 66 2e 0f 1f 84 00 00 00 00 00 66 90 83 fa 08 72 1b <4c> 8b 06 4c 8b 4c 16 f8 4c 89 07 4c 89 4c 17 f8 c3 cc cc cc cc 66 [ 4761.012793] RSP: 0018:ffffb1d565abb830 EFLAGS: 00010246 [ 4761.018020] RAX: ffff9f4bf6b27898 RBX: ffff9f4be23969c0 RCX: ffff9f4bcadf6400 [ 4761.025152] RDX: 0000000000000008 RSI: 0000000000000000 RDI: ffff9f4bf6b27898 [ 4761.032286] RBP: 0000000000000000 R08: 0000000000000008 R09: 0000000000000000 [ 4761.039416] R10: 0000000000000000 R11: 0000000000000600 R12: 0000000000000000 [ 4761.046549] R13: 0000000000000000 R14: 0000000000000080 R15: ffffb1d565abbb10 [ 4761.053680] FS: 00007f64c2ec2740(0000) GS:ffff9f635f980000(0000) knlGS:0000000000000000 [ 4761.061765] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 4761.067513] CR2: 0000000000000000 CR3: 0000001875270006 CR4: 00000000007706e0 [ 4761.074645] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 4761.081775] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 4761.088909] PKRU: 55555554 [ 4761.091620] Call Trace: [ 4761.094074] <TASK> [ 4761.096180] ? __die+0x1f/0x70 [ 4761.099238] ? page_fault_oops+0x171/0x4f0 [ 4761.103340] ? exc_page_fault+0x7b/0x180 [ 4761.107265] ? asm_exc_page_fault+0x22/0x30 [ 4761.111460] ? memcpy_orig+0xc5/0x130 [ 4761.115126] vduse_vdpa_set_vq_affinity+0x3e/0x50 [vduse] [ 4761.120533] virtnet_clean_affinity.part.0+0x3d/0x90 [virtio_net] [ 4761.126635] remove_vq_common+0x1a4/0x250 [virtio_net] [ 4761.131781] virtnet_remove+0x5d/0x70 [virtio_net] [ 4761.136580] virtio_dev_remove+0x3a/0x90 [ 4761.140509] device_release_driver_internal+0x19b/0x200 [ 4761.145742] bus_remove_device+0xc2/0x130 [ 4761.149755] device_del+0x158/0x3e0 [ 4761.153245] ? kernfs_find_ns+0x35/0xc0 [ 4761.157086] device_unregister+0x13/0x60 [ 4761.161010] unregister_virtio_device+0x11/0x20 [ 4761.165543] device_release_driver_internal+0x19b/0x200 [ 4761.170770] bus_remove_device+0xc2/0x130 [ 4761.174782] device_del+0x158/0x3e0 [ 4761.178276] ? __pfx_vdpa_name_match+0x10/0x10 [vdpa] [ 4761.183336] device_unregister+0x13/0x60 [ 4761.187260] vdpa_nl_cmd_dev_del_set_doit+0x63/0xe0 [vdpa] | ||||
| CVE-2025-68216 | 1 Linux | 1 Linux Kernel | 2026-04-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: LoongArch: BPF: Disable trampoline for kernel module function trace The current LoongArch BPF trampoline implementation is incompatible with tracing functions in kernel modules. This causes several severe and user-visible problems: * The `bpf_selftests/module_attach` test fails consistently. * Kernel lockup when a BPF program is attached to a module function [1]. * Critical kernel modules like WireGuard experience traffic disruption when their functions are traced with fentry [2]. Given the severity and the potential for other unknown side-effects, it is safest to disable the feature entirely for now. This patch prevents the BPF subsystem from allowing trampoline attachments to kernel module functions on LoongArch. This is a temporary mitigation until the core issues in the trampoline code for kernel module handling can be identified and fixed. [root@fedora bpf]# ./test_progs -a module_attach -v bpf_testmod.ko is already unloaded. Loading bpf_testmod.ko... Successfully loaded bpf_testmod.ko. test_module_attach:PASS:skel_open 0 nsec test_module_attach:PASS:set_attach_target 0 nsec test_module_attach:PASS:set_attach_target_explicit 0 nsec test_module_attach:PASS:skel_load 0 nsec libbpf: prog 'handle_fentry': failed to attach: -ENOTSUPP libbpf: prog 'handle_fentry': failed to auto-attach: -ENOTSUPP test_module_attach:FAIL:skel_attach skeleton attach failed: -524 Summary: 0/0 PASSED, 0 SKIPPED, 1 FAILED Successfully unloaded bpf_testmod.ko. [1]: https://lore.kernel.org/loongarch/CAK3+h2wDmpC-hP4u4pJY8T-yfKyk4yRzpu2LMO+C13FMT58oqQ@mail.gmail.com/ [2]: https://lore.kernel.org/loongarch/CAK3+h2wYcpc+OwdLDUBvg2rF9rvvyc5amfHT-KcFaK93uoELPg@mail.gmail.com/ | ||||
| CVE-2025-68215 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: ice: fix PTP cleanup on driver removal in error path Improve the cleanup on releasing PTP resources in error path. The error case might happen either at the driver probe and PTP feature initialization or on PTP restart (errors in reset handling, NVM update etc). In both cases, calls to PF PTP cleanup (ice_ptp_cleanup_pf function) and 'ps_lock' mutex deinitialization were missed. Additionally, ptp clock was not unregistered in the latter case. Keep PTP state as 'uninitialized' on init to distinguish between error scenarios and to avoid resource release duplication at driver removal. The consequence of missing ice_ptp_cleanup_pf call is the following call trace dumped when ice_adapter object is freed (port list is not empty, as it is required at this stage): [ T93022] ------------[ cut here ]------------ [ T93022] WARNING: CPU: 10 PID: 93022 at ice/ice_adapter.c:67 ice_adapter_put+0xef/0x100 [ice] ... [ T93022] RIP: 0010:ice_adapter_put+0xef/0x100 [ice] ... [ T93022] Call Trace: [ T93022] <TASK> [ T93022] ? ice_adapter_put+0xef/0x100 [ice 33d2647ad4f6d866d41eefff1806df37c68aef0c] [ T93022] ? __warn.cold+0xb0/0x10e [ T93022] ? ice_adapter_put+0xef/0x100 [ice 33d2647ad4f6d866d41eefff1806df37c68aef0c] [ T93022] ? report_bug+0xd8/0x150 [ T93022] ? handle_bug+0xe9/0x110 [ T93022] ? exc_invalid_op+0x17/0x70 [ T93022] ? asm_exc_invalid_op+0x1a/0x20 [ T93022] ? ice_adapter_put+0xef/0x100 [ice 33d2647ad4f6d866d41eefff1806df37c68aef0c] [ T93022] pci_device_remove+0x42/0xb0 [ T93022] device_release_driver_internal+0x19f/0x200 [ T93022] driver_detach+0x48/0x90 [ T93022] bus_remove_driver+0x70/0xf0 [ T93022] pci_unregister_driver+0x42/0xb0 [ T93022] ice_module_exit+0x10/0xdb0 [ice 33d2647ad4f6d866d41eefff1806df37c68aef0c] ... [ T93022] ---[ end trace 0000000000000000 ]--- [ T93022] ice: module unloaded | ||||
| CVE-2023-53794 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: cifs: fix session state check in reconnect to avoid use-after-free issue Don't collect exiting session in smb2_reconnect_server(), because it will be released soon. Note that the exiting session will stay in server->smb_ses_list until it complete the cifs_free_ipc() and logoff() and then delete itself from the list. | ||||
| CVE-2025-68213 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: idpf: fix possible vport_config NULL pointer deref in remove Attempting to remove the driver will cause a crash in cases where the vport failed to initialize. Following trace is from an instance where the driver failed during an attempt to create a VF: [ 1661.543624] idpf 0000:84:00.7: Device HW Reset initiated [ 1722.923726] idpf 0000:84:00.7: Transaction timed-out (op:1 cookie:2900 vc_op:1 salt:29 timeout:60000ms) [ 1723.353263] BUG: kernel NULL pointer dereference, address: 0000000000000028 ... [ 1723.358472] RIP: 0010:idpf_remove+0x11c/0x200 [idpf] ... [ 1723.364973] Call Trace: [ 1723.365475] <TASK> [ 1723.365972] pci_device_remove+0x42/0xb0 [ 1723.366481] device_release_driver_internal+0x1a9/0x210 [ 1723.366987] pci_stop_bus_device+0x6d/0x90 [ 1723.367488] pci_stop_and_remove_bus_device+0x12/0x20 [ 1723.367971] pci_iov_remove_virtfn+0xbd/0x120 [ 1723.368309] sriov_disable+0x34/0xe0 [ 1723.368643] idpf_sriov_configure+0x58/0x140 [idpf] [ 1723.368982] sriov_numvfs_store+0xda/0x1c0 Avoid the NULL pointer dereference by adding NULL pointer check for vport_config[i], before freeing user_config.q_coalesce. | ||||
| CVE-2023-54284 | 1 Linux | 1 Linux Kernel | 2026-04-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: media: av7110: prevent underflow in write_ts_to_decoder() The buf[4] value comes from the user via ts_play(). It is a value in the u8 range. The final length we pass to av7110_ipack_instant_repack() is "len - (buf[4] + 1) - 4" so add a check to ensure that the length is not negative. It's not clear that passing a negative len value does anything bad necessarily, but it's not best practice. With the new bounds checking the "if (!len)" condition is no longer possible or required so remove that. | ||||
| CVE-2023-53789 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: iommu/amd: Improve page fault error reporting If IOMMU domain for device group is not setup properly then we may hit IOMMU page fault. Current page fault handler assumes that domain is always setup and it will hit NULL pointer derefence (see below sample log). Lets check whether domain is setup or not and log appropriate message. Sample log: ---------- amdgpu 0000:00:01.0: amdgpu: SE 1, SH per SE 1, CU per SH 8, active_cu_number 6 BUG: kernel NULL pointer dereference, address: 0000000000000058 #PF: supervisor read access in kernel mode #PF: error_code(0x0000) - not-present page PGD 0 P4D 0 Oops: 0000 [#1] PREEMPT SMP NOPTI CPU: 2 PID: 56 Comm: irq/24-AMD-Vi Not tainted 6.2.0-rc2+ #89 Hardware name: xxx RIP: 0010:report_iommu_fault+0x11/0x90 [...] Call Trace: <TASK> amd_iommu_int_thread+0x60c/0x760 ? __pfx_irq_thread_fn+0x10/0x10 irq_thread_fn+0x1f/0x60 irq_thread+0xea/0x1a0 ? preempt_count_add+0x6a/0xa0 ? __pfx_irq_thread_dtor+0x10/0x10 ? __pfx_irq_thread+0x10/0x10 kthread+0xe9/0x110 ? __pfx_kthread+0x10/0x10 ret_from_fork+0x2c/0x50 </TASK> [joro: Edit commit message] | ||||
| CVE-2025-40156 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: PM / devfreq: mtk-cci: Fix potential error pointer dereference in probe() The drv->sram_reg pointer could be set to ERR_PTR(-EPROBE_DEFER) which would lead to a error pointer dereference. Use IS_ERR_OR_NULL() to check that the pointer is valid. | ||||
| CVE-2025-40294 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: Bluetooth: MGMT: Fix OOB access in parse_adv_monitor_pattern() In the parse_adv_monitor_pattern() function, the value of the 'length' variable is currently limited to HCI_MAX_EXT_AD_LENGTH(251). The size of the 'value' array in the mgmt_adv_pattern structure is 31. If the value of 'pattern[i].length' is set in the user space and exceeds 31, the 'patterns[i].value' array can be accessed out of bound when copied. Increasing the size of the 'value' array in the 'mgmt_adv_pattern' structure will break the userspace. Considering this, and to avoid OOB access revert the limits for 'offset' and 'length' back to the value of HCI_MAX_AD_LENGTH. Found by InfoTeCS on behalf of Linux Verification Center (linuxtesting.org) with SVACE. | ||||
| CVE-2023-53784 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: drm: bridge: dw_hdmi: fix connector access for scdc Commit 5d844091f237 ("drm/scdc-helper: Pimp SCDC debugs") changed the scdc interface to pick up an i2c adapter from a connector instead. However, in the case of dw-hdmi, the wrong connector was being used to pass i2c adapter information, since dw-hdmi's embedded connector structure is only populated when the bridge attachment callback explicitly asks for it. drm-meson is handling connector creation, so this won't happen, leading to a NULL pointer dereference. Fix it by having scdc functions access dw-hdmi's current connector pointer instead, which is assigned during the bridge enablement stage. [narmstrong: moved Fixes tag before first S-o-b and added Reported-by tag] | ||||
| CVE-2025-40154 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: ASoC: Intel: bytcr_rt5640: Fix invalid quirk input mapping When an invalid value is passed via quirk option, currently bytcr_rt5640 driver only shows an error message but leaves as is. This may lead to unepxected results like OOB access. This patch corrects the input mapping to the certain default value if an invalid value is passed. | ||||
| CVE-2023-54018 | 1 Linux | 1 Linux Kernel | 2026-04-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: drm/msm/hdmi: Add missing check for alloc_ordered_workqueue Add check for the return value of alloc_ordered_workqueue as it may return NULL pointer and cause NULL pointer dereference in `hdmi_hdcp.c` and `hdmi_hpd.c`. Patchwork: https://patchwork.freedesktop.org/patch/517211/ | ||||
| CVE-2022-50628 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: drm/gud: Fix UBSAN warning UBSAN complains about invalid value for bool: [ 101.165172] [drm] Initialized gud 1.0.0 20200422 for 2-3.2:1.0 on minor 1 [ 101.213360] gud 2-3.2:1.0: [drm] fb1: guddrmfb frame buffer device [ 101.213426] usbcore: registered new interface driver gud [ 101.989431] ================================================================================ [ 101.989441] UBSAN: invalid-load in linux/include/linux/iosys-map.h:253:9 [ 101.989447] load of value 121 is not a valid value for type '_Bool' [ 101.989451] CPU: 1 PID: 455 Comm: kworker/1:6 Not tainted 5.18.0-rc5-gud-5.18-rc5 #3 [ 101.989456] Hardware name: Hewlett-Packard HP EliteBook 820 G1/1991, BIOS L71 Ver. 01.44 04/12/2018 [ 101.989459] Workqueue: events_long gud_flush_work [gud] [ 101.989471] Call Trace: [ 101.989474] <TASK> [ 101.989479] dump_stack_lvl+0x49/0x5f [ 101.989488] dump_stack+0x10/0x12 [ 101.989493] ubsan_epilogue+0x9/0x3b [ 101.989498] __ubsan_handle_load_invalid_value.cold+0x44/0x49 [ 101.989504] dma_buf_vmap.cold+0x38/0x3d [ 101.989511] ? find_busiest_group+0x48/0x300 [ 101.989520] drm_gem_shmem_vmap+0x76/0x1b0 [drm_shmem_helper] [ 101.989528] drm_gem_shmem_object_vmap+0x9/0xb [drm_shmem_helper] [ 101.989535] drm_gem_vmap+0x26/0x60 [drm] [ 101.989594] drm_gem_fb_vmap+0x47/0x150 [drm_kms_helper] [ 101.989630] gud_prep_flush+0xc1/0x710 [gud] [ 101.989639] ? _raw_spin_lock+0x17/0x40 [ 101.989648] gud_flush_work+0x1e0/0x430 [gud] [ 101.989653] ? __switch_to+0x11d/0x470 [ 101.989664] process_one_work+0x21f/0x3f0 [ 101.989673] worker_thread+0x200/0x3e0 [ 101.989679] ? rescuer_thread+0x390/0x390 [ 101.989684] kthread+0xfd/0x130 [ 101.989690] ? kthread_complete_and_exit+0x20/0x20 [ 101.989696] ret_from_fork+0x22/0x30 [ 101.989706] </TASK> [ 101.989708] ================================================================================ The source of this warning is in iosys_map_clear() called from dma_buf_vmap(). It conditionally sets values based on map->is_iomem. The iosys_map variables are allocated uninitialized on the stack leading to ->is_iomem having all kinds of values and not only 0/1. Fix this by zeroing the iosys_map variables. | ||||
| CVE-2023-53994 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: ionic: remove WARN_ON to prevent panic_on_warn Remove unnecessary early code development check and the WARN_ON that it uses. The irq alloc and free paths have long been cleaned up and this check shouldn't have stuck around so long. | ||||
| CVE-2023-53765 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: dm cache: free background tracker's queued work in btracker_destroy Otherwise the kernel can BUG with: [ 2245.426978] ============================================================================= [ 2245.435155] BUG bt_work (Tainted: G B W ): Objects remaining in bt_work on __kmem_cache_shutdown() [ 2245.445233] ----------------------------------------------------------------------------- [ 2245.445233] [ 2245.454879] Slab 0x00000000b0ce2b30 objects=64 used=2 fp=0x000000000a3c6a4e flags=0x17ffffc0000200(slab|node=0|zone=2|lastcpupid=0x1fffff) [ 2245.467300] CPU: 7 PID: 10805 Comm: lvm Kdump: loaded Tainted: G B W 6.0.0-rc2 #19 [ 2245.476078] Hardware name: Dell Inc. PowerEdge R7525/0590KW, BIOS 2.5.6 10/06/2021 [ 2245.483646] Call Trace: [ 2245.486100] <TASK> [ 2245.488206] dump_stack_lvl+0x34/0x48 [ 2245.491878] slab_err+0x95/0xcd [ 2245.495028] __kmem_cache_shutdown.cold+0x31/0x136 [ 2245.499821] kmem_cache_destroy+0x49/0x130 [ 2245.503928] btracker_destroy+0x12/0x20 [dm_cache] [ 2245.508728] smq_destroy+0x15/0x60 [dm_cache_smq] [ 2245.513435] dm_cache_policy_destroy+0x12/0x20 [dm_cache] [ 2245.518834] destroy+0xc0/0x110 [dm_cache] [ 2245.522933] dm_table_destroy+0x5c/0x120 [dm_mod] [ 2245.527649] __dm_destroy+0x10e/0x1c0 [dm_mod] [ 2245.532102] dev_remove+0x117/0x190 [dm_mod] [ 2245.536384] ctl_ioctl+0x1a2/0x290 [dm_mod] [ 2245.540579] dm_ctl_ioctl+0xa/0x20 [dm_mod] [ 2245.544773] __x64_sys_ioctl+0x8a/0xc0 [ 2245.548524] do_syscall_64+0x5c/0x90 [ 2245.552104] ? syscall_exit_to_user_mode+0x12/0x30 [ 2245.556897] ? do_syscall_64+0x69/0x90 [ 2245.560648] ? do_syscall_64+0x69/0x90 [ 2245.564394] entry_SYSCALL_64_after_hwframe+0x63/0xcd [ 2245.569447] RIP: 0033:0x7fe52583ec6b ... [ 2245.646771] ------------[ cut here ]------------ [ 2245.651395] kmem_cache_destroy bt_work: Slab cache still has objects when called from btracker_destroy+0x12/0x20 [dm_cache] [ 2245.651408] WARNING: CPU: 7 PID: 10805 at mm/slab_common.c:478 kmem_cache_destroy+0x128/0x130 Found using: lvm2-testsuite --only "cache-single-split.sh" Ben bisected and found that commit 0495e337b703 ("mm/slab_common: Deleting kobject in kmem_cache_destroy() without holding slab_mutex/cpu_hotplug_lock") first exposed dm-cache's incomplete cleanup of its background tracker work objects. | ||||
| CVE-2025-40097 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: ALSA: hda: Fix missing pointer check in hda_component_manager_init function The __component_match_add function may assign the 'matchptr' pointer the value ERR_PTR(-ENOMEM), which will subsequently be dereferenced. The call stack leading to the error looks like this: hda_component_manager_init |-> component_match_add |-> component_match_add_release |-> __component_match_add ( ... ,**matchptr, ... ) |-> *matchptr = ERR_PTR(-ENOMEM); // assign |-> component_master_add_with_match( ... match) |-> component_match_realloc(match, match->num); // dereference Add IS_ERR() check to prevent the crash. Found by Linux Verification Center (linuxtesting.org) with SVACE. | ||||
| CVE-2025-40015 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: media: stm32-csi: Fix dereference before NULL check In 'stm32_csi_start', 'csidev->s_subdev' is dereferenced directly while assigning a value to the 'src_pad'. However the same value is being checked against NULL at a later point of time indicating that there are chances that the value can be NULL. Move the dereference after the NULL check. | ||||
| CVE-2022-50750 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: drm/panel/panel-sitronix-st7701: Remove panel on DSI attach failure In case mipi_dsi_attach() fails, call drm_panel_remove() to avoid memory leak. | ||||