| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
remoteproc: mtk_scp: Fix a potential double free
'scp->rproc' is allocated using devm_rproc_alloc(), so there is no need
to free it explicitly in the remove function. |
| In the Linux kernel, the following vulnerability has been resolved:
mac80211: fix potential double free on mesh join
While commit 6a01afcf8468 ("mac80211: mesh: Free ie data when leaving
mesh") fixed a memory leak on mesh leave / teardown it introduced a
potential memory corruption caused by a double free when rejoining the
mesh:
ieee80211_leave_mesh()
-> kfree(sdata->u.mesh.ie);
...
ieee80211_join_mesh()
-> copy_mesh_setup()
-> old_ie = ifmsh->ie;
-> kfree(old_ie);
This double free / kernel panics can be reproduced by using wpa_supplicant
with an encrypted mesh (if set up without encryption via "iw" then
ifmsh->ie is always NULL, which avoids this issue). And then calling:
$ iw dev mesh0 mesh leave
$ iw dev mesh0 mesh join my-mesh
Note that typically these commands are not used / working when using
wpa_supplicant. And it seems that wpa_supplicant or wpa_cli are going
through a NETDEV_DOWN/NETDEV_UP cycle between a mesh leave and mesh join
where the NETDEV_UP resets the mesh.ie to NULL via a memcpy of
default_mesh_setup in cfg80211_netdev_notifier_call, which then avoids
the memory corruption, too.
The issue was first observed in an application which was not using
wpa_supplicant but "Senf" instead, which implements its own calls to
nl80211.
Fixing the issue by removing the kfree()'ing of the mesh IE in the mesh
join function and leaving it solely up to the mesh leave to free the
mesh IE. |
| In the Linux kernel, the following vulnerability has been resolved:
s390/pci: Fix potential double remove of hotplug slot
In commit 6ee600bfbe0f ("s390/pci: remove hotplug slot when releasing the
device") the zpci_exit_slot() was moved from zpci_device_reserved() to
zpci_release_device() with the intention of keeping the hotplug slot
around until the device is actually removed.
Now zpci_release_device() is only called once all references are
dropped. Since the zPCI subsystem only drops its reference once the
device is in the reserved state it follows that zpci_release_device()
must only deal with devices in the reserved state. Despite that it
contains code to tear down from both configured and standby state. For
the standby case this already includes the removal of the hotplug slot
so would cause a double removal if a device was ever removed in
either configured or standby state.
Instead of causing a potential double removal in a case that should
never happen explicitly WARN_ON() if a device in non-reserved state is
released and get rid of the dead code cases. |
| In the Linux kernel, the following vulnerability has been resolved:
misc: fastrpc: avoid double fput() on failed usercopy
If the copy back to userland fails for the FASTRPC_IOCTL_ALLOC_DMA_BUFF
ioctl(), we shouldn't assume that 'buf->dmabuf' is still valid. In fact,
dma_buf_fd() called fd_install() before, i.e. "consumed" one reference,
leaving us with none.
Calling dma_buf_put() will therefore put a reference we no longer own,
leading to a valid file descritor table entry for an already released
'file' object which is a straight use-after-free.
Simply avoid calling dma_buf_put() and rely on the process exit code to
do the necessary cleanup, if needed, i.e. if the file descriptor is
still valid. |
| A double free vulnerability has been reported to affect several QNAP operating system versions. If exploited, the vulnerability could allow remote attackers who have gained administrator access to modify memory.
We have already fixed the vulnerability in the following versions:
QTS 5.2.3.3006 build 20250108 and later
QuTS hero h5.2.3.3006 build 20250108 and later |
| In the Linux kernel, the following vulnerability has been resolved:
bpf, sockmap: Fix double uncharge the mem of sk_msg
If tcp_bpf_sendmsg is running during a tear down operation, psock may be
freed.
tcp_bpf_sendmsg()
tcp_bpf_send_verdict()
sk_msg_return()
tcp_bpf_sendmsg_redir()
unlikely(!psock))
sk_msg_free()
The mem of msg has been uncharged in tcp_bpf_send_verdict() by
sk_msg_return(), and would be uncharged by sk_msg_free() again. When psock
is null, we can simply returning an error code, this would then trigger
the sk_msg_free_nocharge in the error path of __SK_REDIRECT and would have
the side effect of throwing an error up to user space. This would be a
slight change in behavior from user side but would look the same as an
error if the redirect on the socket threw an error.
This issue can cause the following info:
WARNING: CPU: 0 PID: 2136 at net/ipv4/af_inet.c:155 inet_sock_destruct+0x13c/0x260
Call Trace:
<TASK>
__sk_destruct+0x24/0x1f0
sk_psock_destroy+0x19b/0x1c0
process_one_work+0x1b3/0x3c0
worker_thread+0x30/0x350
? process_one_work+0x3c0/0x3c0
kthread+0xe6/0x110
? kthread_complete_and_exit+0x20/0x20
ret_from_fork+0x22/0x30
</TASK> |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: ath12k: fix the error handler of rfkill config
When the core rfkill config throws error, it should free the
allocated resources. Currently it is not freeing the core pdev
create resources. Avoid this issue by calling the core pdev
destroy in the error handler of core rfkill config.
Found this issue in the code review and it is compile tested only. |
| A double-free could have occurred in `vpx_codec_enc_init_multi` after a failed allocation when initializing the encoder for WebRTC. This could have caused memory corruption and a potentially exploitable crash. This vulnerability affects Thunderbird < 139 and Thunderbird < 128.11. |
| A vulnerability, which was classified as critical, has been found in libav up to 12.3. Affected by this issue is the function main of the file /avtools/avconv.c of the component DSS File Demuxer. The manipulation leads to double free. Attacking locally is a requirement. The exploit has been disclosed to the public and may be used. The bug was initially reported by the researcher to the wrong project. This vulnerability only affects products that are no longer supported by the maintainer. |
| Miniaudio 0.10.35 has a Double free vulnerability that could cause a buffer overflow in ma_default_vfs_close__stdio in miniaudio.h. |
| gnuplot 5.5 is affected by double free when executing print_set_output. This may result in context-dependent arbitrary code execution. |
| Linux Kernel Bluetooth CMTP Module Double Free Privilege Escalation Vulnerability. This vulnerability allows local attackers to escalate privileges on affected installations of Linux Kernel. An attacker must first obtain the ability to execute high-privileged code on the target system in order to exploit this vulnerability.
The specific flaw exists within the CMTP module. The issue results from the lack of validating the existence of an object prior to performing further free operations on the object. An attacker can leverage this vulnerability to escalate privileges and execute code in the context of the kernel. Was ZDI-CAN-11977. |
| Vim is an open source, command line text editor. In versions from 9.1.1231 to before 9.1.1406, when processing nested tuples during Vim9 script import operations, an error during evaluation can trigger a double-free in Vim’s internal typed value (typval_T) management. Specifically, the clear_tv() function may attempt to free memory that has already been deallocated, due to improper lifetime handling in the handle_import / ex_import code paths. The vulnerability can only be triggered if a user explicitly opens and executes a specially crafted Vim script. This issue has been patched in version 9.1.1406. |
| NVIDIA Triton Inference Server for Windows and Linux contains a vulnerability where multiple requests could cause a double free when a stream is cancelled before it is processed. A successful exploit of this vulnerability might lead to denial of service. |
| Memory corruption while processing multiple simultaneous escape calls. |
| Memory Corruption in Modem due to double free while parsing the PKCS15 sim files. |
| Double-Free Vulnerability in uD3TN BPv7 Caused by Malformed Endpoint Identifier allows remote attacker to reliably cause DoS |
| In lwis_device_event_states_clear_locked of lwis_event.c, there is a possible privilege escalation due to a double free. This could lead to local escalation of privilege with no additional execution privileges needed. User interaction is not needed for exploitation. |
| A vulnerability has been found in HDF5 up to 1.14.6 and classified as problematic. This vulnerability affects the function H5MM_realloc of the file src/H5MM.c. The manipulation of the argument mem leads to double free. The attack needs to be approached locally. The exploit has been disclosed to the public and may be used. |
| Dave Gamble cJSON version 1.7.2 and earlier contains a CWE-415: Double Free vulnerability in cJSON library that can result in Possible crash or RCE. This attack appear to be exploitable via Attacker must be able to force victim to print JSON data, depending on how cJSON library is used this could be either local or over a network. This vulnerability appears to have been fixed in 1.7.3. |
