| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| OpenEXR provides the specification and reference implementation of the EXR file format, an image storage format for the motion picture industry. From versions 3.0.0 to before 3.2.9, 3.3.0 to before 3.3.11, and 3.4.0 to before 3.4.11, there is an integer overflow in ImageChannel::resize that leads to heap OOB write via OpenEXRUtil public API. This issue has been patched in versions 3.2.9, 3.3.11, and 3.4.11. |
| OpenEXR provides the specification and reference implementation of the EXR file format, an image storage format for the motion picture industry. From versions 3.0.0 to before 3.2.9, 3.3.0 to before 3.3.11, and 3.4.0 to before 3.4.11, IDManifest::init() reconstructs strings from a prefix-compressed representation. If the previous string is longer than 255 bytes, the next string is expected to begin with a 2-byte prefix length. The code reads stringList[i][0] and stringList[i][1] without checking that the current string has at least two bytes. This issue has been patched in versions 3.2.9, 3.3.11, and 3.4.11. |
| OpenEXR provides the specification and reference implementation of the EXR file format, an image storage format for the motion picture industry. From versions 3.0.0 to before 3.2.9, 3.3.0 to before 3.3.11, and 3.4.0 to before 3.4.11, readVariableLengthInteger() decodes a variable-length integer from untrusted EXR input without bounding the shift count. After enough continuation bytes, the code executes a left shift by 70 on a 64-bit value, which is undefined behavior. This issue has been patched in versions 3.2.9, 3.3.11, and 3.4.11. |
| Out-of-bounds write vulnerability in The Document Foundation LibreOffice via crafted OOXML documents with mismatched encryption salt parameters.
This issue affects LibreOffice: from 26.2 before 26.2.3, from 25.8 before 25.8.7. |
| Authorization Bypass Through User-Controlled Key vulnerability in YITH YITH WooCommerce Wishlist allows Exploiting Incorrectly Configured Access Control Security Levels.
This issue affects YITH WooCommerce Wishlist: from n/a through 4.12.0. |
| Missing Authorization vulnerability in Magepeople inc. Bus Ticket Booking with Seat Reservation allows Exploiting Incorrectly Configured Access Control Security Levels.
This issue affects Bus Ticket Booking with Seat Reservation: from n/a before 5.6.8. |
| Dagster is an orchestration platform for the development, production, and observation of data assets. Prior to Dagster Core version 1.13.1 and prior to Dagster libraries version 0.29.1, the DuckDB, Snowflake, BigQuery, and DeltaLake I/O managers constructed SQL WHERE clauses by interpolating dynamic partition key values into queries without escaping. A user with the Add Dynamic Partitions permission could create a partition key that injects arbitrary SQL, which would execute against the target database backend under the I/O manager's credentials. Only deployments that use dynamic partitions are affected. Pipelines using static or time-window partitions are not impacted. This issue has been patched in Dagster Core version 1.13.1 and Dagster libraries version 0.29.1. |
| Weblate is a web based localization tool. Prior to version 5.17.1, an authenticated user with project.add permission (default on hosted Weblate SaaS and for any user holding an active billing/trial plan) can import a crafted project backup ZIP whose components/<name>.json contains an attacker-chosen repo URL pointing at a private address (e.g. http://127.0.0.1:9999/) or using a non-allow-listed scheme (e.g. file://, git://). Weblate persists the component via Component.objects.bulk_create([component])[0], which bypasses Django's full_clean() and therefore never runs the validate_repo_url validator. The URL is subsequently written verbatim into .git/config by configure_repo(pull=False). This issue has been patched in version 5.17.1. |
| Weblate is a web based localization tool. Prior to version 5.17.1, when a user changes their password, browser sessions are correctly invalidated via "cycle_session_keys()", but DRF API tokens ("wlu_*" prefix) stored in "authtoken_token" are not revoked. This issue has been patched in version 5.17.1. |
| Weblate is a web based localization tool. Prior to version 5.17.1, the screenshots, tasks, and component link API allowed for the enumeration of translations in a project inaccessible to the user. This issue has been patched in version 5.17.1. |
| Weblate is a web based localization tool. Prior to version 5.17.1, the Markdown renderer used in user comments and other user-provided content didn't properly sanitize some attributes. This issue has been patched in version 5.17.1. |
| Medtronic MyCareLink Patient Monitor has an internal serial interface, which allows an attacker with physical access to access a login prompt via a UART terminal. |
| Medtronic MyCareLink Patient Monitor uses per-product credentials that are stored in a recoverable format. An attacker can use these credentials to modify encrypted drive data. |
| In the Linux kernel, the following vulnerability has been resolved:
HID: wacom: fix out-of-bounds read in wacom_intuos_bt_irq
The wacom_intuos_bt_irq() function processes Bluetooth HID reports
without sufficient bounds checking. A maliciously crafted short report
can trigger an out-of-bounds read when copying data into the wacom
structure.
Specifically, report 0x03 requires at least 22 bytes to safely read
the processed data and battery status, while report 0x04 (which
falls through to 0x03) requires 32 bytes.
Add explicit length checks for these report IDs and log a warning if
a short report is received. |
| A buffer overflow vulnerability in the User-ID™ Authentication Portal (aka Captive Portal) service of Palo Alto Networks PAN-OS software allows an unauthenticated attacker to execute arbitrary code with root privileges on the PA-Series and VM-Series firewalls by sending specially crafted packets.
The risk of this issue is greatly reduced if you secure access to the User-ID™ Authentication Portal per the best practice guidelines https://knowledgebase.paloaltonetworks.com/KCSArticleDetail by restricting access to only trusted internal IP addresses.
Prisma Access, Cloud NGFW and Panorama appliances are not impacted by this vulnerability. |
| In the Linux kernel, the following vulnerability has been resolved:
vt: discard stale unicode buffer on alt screen exit after resize
When enter_alt_screen() saves vc_uni_lines into vc_saved_uni_lines and
sets vc_uni_lines to NULL, a subsequent console resize via vc_do_resize()
skips reallocating the unicode buffer because vc_uni_lines is NULL.
However, vc_saved_uni_lines still points to the old buffer allocated for
the original dimensions.
When leave_alt_screen() later restores vc_saved_uni_lines, the buffer
dimensions no longer match vc_rows/vc_cols. Any operation that iterates
over the unicode buffer using the current dimensions (e.g. csi_J clearing
the screen) will access memory out of bounds, causing a kernel oops:
BUG: unable to handle page fault for address: 0x0000002000000020
RIP: 0010:csi_J+0x133/0x2d0
The faulting address 0x0000002000000020 is two adjacent u32 space
characters (0x20) interpreted as a pointer, read from the row data area
past the end of the 25-entry pointer array in a buffer allocated for
80x25 but accessed with 240x67 dimensions.
Fix this by checking whether the console dimensions changed while in the
alternate screen. If they did, free the stale saved buffer instead of
restoring it. The unicode screen will be lazily rebuilt via
vc_uniscr_check() when next needed. |
| In the Linux kernel, the following vulnerability has been resolved:
virt: tdx-guest: Fix handling of host controlled 'quote' buffer length
Validate host controlled value `quote_buf->out_len` that determines how
many bytes of the quote are copied out to guest userspace. In TDX
environments with remote attestation, quotes are not considered private,
and can be forwarded to an attestation server.
Catch scenarios where the host specifies a response length larger than
the guest's allocation, or otherwise races modifying the response while
the guest consumes it.
This prevents contents beyond the pages allocated for `quote_buf`
(up to TSM_REPORT_OUTBLOB_MAX) from being read out to guest userspace,
and possibly forwarded in attestation requests.
Recall that some deployments want per-container configs-tsm-report
interfaces, so the leak may cross container protection boundaries, not
just local root. |
| OpenClaw before 2026.4.9 contains a file read vulnerability allowing attackers to bypass navigation guards through browser act/evaluate interactions. Attackers can pivot into the local CDP origin and create or read disallowed file:// pages despite direct navigation policy restrictions. |
| OpenClaw versions 2026.4.10 before 2026.4.14 fail to persist session context during delivery queue recovery for media replay. Attackers can exploit recovered queued outbound media to bypass group tool policy enforcement and weaken channel media restrictions after service restart or recovery. |
| In the Linux kernel, the following vulnerability has been resolved:
thermal: core: Address thermal zone removal races with resume
Since thermal_zone_pm_complete() and thermal_zone_device_resume()
re-initialize the poll_queue delayed work for the given thermal zone,
the cancel_delayed_work_sync() in thermal_zone_device_unregister()
may miss some already running work items and the thermal zone may
be freed prematurely [1].
There are two failing scenarios that both start with
running thermal_pm_notify_complete() right before invoking
thermal_zone_device_unregister() for one of the thermal zones.
In the first scenario, there is a work item already running for
the given thermal zone when thermal_pm_notify_complete() calls
thermal_zone_pm_complete() for that thermal zone and it continues to
run when thermal_zone_device_unregister() starts. Since the poll_queue
delayed work has been re-initialized by thermal_pm_notify_complete(), the
running work item will be missed by the cancel_delayed_work_sync() in
thermal_zone_device_unregister() and if it continues to run past the
freeing of the thermal zone object, a use-after-free will occur.
In the second scenario, thermal_zone_device_resume() queued up by
thermal_pm_notify_complete() runs right after the thermal_zone_exit()
called by thermal_zone_device_unregister() has returned. The poll_queue
delayed work is re-initialized by it before cancel_delayed_work_sync() is
called by thermal_zone_device_unregister(), so it may continue to run
after the freeing of the thermal zone object, which also leads to a
use-after-free.
Address the first failing scenario by ensuring that no thermal work
items will be running when thermal_pm_notify_complete() is called.
For this purpose, first move the cancel_delayed_work() call from
thermal_zone_pm_complete() to thermal_zone_pm_prepare() to prevent
new work from entering the workqueue going forward. Next, switch
over to using a dedicated workqueue for thermal events and update
the code in thermal_pm_notify() to flush that workqueue after
thermal_pm_notify_prepare() has returned which will take care of
all leftover thermal work already on the workqueue (that leftover
work would do nothing useful anyway because all of the thermal zones
have been flagged as suspended).
The second failing scenario is addressed by adding a tz->state check
to thermal_zone_device_resume() to prevent it from re-initializing
the poll_queue delayed work if the thermal zone is going away.
Note that the above changes will also facilitate relocating the suspend
and resume of thermal zones closer to the suspend and resume of devices,
respectively. |
