Export limit exceeded: 349376 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (349376 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-44338 | 2 Mervinpraison, Praison | 2 Praisonai, Praisonai | 2026-05-08 | 7.3 High |
| PraisonAI is a multi-agent teams system. From version 2.5.6 to before version 4.6.34, PraisonAI ships a legacy Flask API server with authentication disabled by default. When that server is used, any caller that can reach it can access /agents and trigger the configured agents.yaml workflow through /chat without providing a token. This issue has been patched in version 4.6.34. | ||||
| CVE-2026-43223 | 1 Linux | 1 Linux Kernel | 2026-05-08 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: media: pvrusb2: fix URB leak in pvr2_send_request_ex When pvr2_send_request_ex() submits a write URB successfully but fails to submit the read URB (e.g. returns -ENOMEM), it returns immediately without waiting for the write URB to complete. Since the driver reuses the same URB structure, a subsequent call to pvr2_send_request_ex() attempts to submit the still-active write URB, triggering a 'URB submitted while active' warning in usb_submit_urb(). Fix this by ensuring the write URB is unlinked and waited upon if the read URB submission fails. | ||||
| CVE-2026-43224 | 1 Linux | 1 Linux Kernel | 2026-05-08 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: io_uring/zcrx: fix sgtable leak on mapping failures In an unlikely case when io_populate_area_dma() fails, which could only happen on a PAGE_POOL_32BIT_ARCH_WITH_64BIT_DMA machine, io_zcrx_map_area() will have an initialised and not freed table. It was supposed to be cleaned up in the error path, but !is_mapped prevents that. | ||||
| CVE-2026-43222 | 1 Linux | 1 Linux Kernel | 2026-05-08 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: media: verisilicon: AV1: Fix tile info buffer size Each tile info is composed of: row_sb, col_sb, start_pos and end_pos (4 bytes each). So the total required memory is AV1_MAX_TILES * 16 bytes. Use the correct #define to allocate the buffer and avoid writing tile info in non-allocated memory. | ||||
| CVE-2026-43227 | 1 Linux | 1 Linux Kernel | 2026-05-08 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: clocksource/drivers/sh_tmu: Always leave device running after probe The TMU device can be used as both a clocksource and a clockevent provider. The driver tries to be smart and power itself on and off, as well as enabling and disabling its clock when it's not in operation. This behavior is slightly altered if the TMU is used as an early platform device in which case the device is left powered on after probe, but the clock is still enabled and disabled at runtime. This has worked for a long time, but recent improvements in PREEMPT_RT and PROVE_LOCKING have highlighted an issue. As the TMU registers itself as a clockevent provider, clockevents_register_device(), it needs to use raw spinlocks internally as this is the context of which the clockevent framework interacts with the TMU driver. However in the context of holding a raw spinlock the TMU driver can't really manage its power state or clock with calls to pm_runtime_*() and clk_*() as these calls end up in other platform drivers using regular spinlocks to control power and clocks. This mix of spinlock contexts trips a lockdep warning. ============================= [ BUG: Invalid wait context ] 6.18.0-arm64-renesas-09926-gee959e7c5e34 #1 Not tainted ----------------------------- swapper/0/0 is trying to lock: ffff000008c9e180 (&dev->power.lock){-...}-{3:3}, at: __pm_runtime_resume+0x38/0x88 other info that might help us debug this: context-{5:5} 1 lock held by swapper/0/0: ccree e6601000.crypto: ARM CryptoCell 630P Driver: HW version 0xAF400001/0xDCC63000, Driver version 5.0 #0: ffff8000817ec298 ccree e6601000.crypto: ARM ccree device initialized (tick_broadcast_lock){-...}-{2:2}, at: __tick_broadcast_oneshot_control+0xa4/0x3a8 stack backtrace: CPU: 0 UID: 0 PID: 0 Comm: swapper/0 Not tainted 6.18.0-arm64-renesas-09926-gee959e7c5e34 #1 PREEMPT Hardware name: Renesas Salvator-X 2nd version board based on r8a77965 (DT) Call trace: show_stack+0x14/0x1c (C) dump_stack_lvl+0x6c/0x90 dump_stack+0x14/0x1c __lock_acquire+0x904/0x1584 lock_acquire+0x220/0x34c _raw_spin_lock_irqsave+0x58/0x80 __pm_runtime_resume+0x38/0x88 sh_tmu_clock_event_set_oneshot+0x84/0xd4 clockevents_switch_state+0xfc/0x13c tick_broadcast_set_event+0x30/0xa4 __tick_broadcast_oneshot_control+0x1e0/0x3a8 tick_broadcast_oneshot_control+0x30/0x40 cpuidle_enter_state+0x40c/0x680 cpuidle_enter+0x30/0x40 do_idle+0x1f4/0x280 cpu_startup_entry+0x34/0x40 kernel_init+0x0/0x130 do_one_initcall+0x0/0x230 __primary_switched+0x88/0x90 For non-PREEMPT_RT builds this is not really an issue, but for PREEMPT_RT builds where normal spinlocks can sleep this might be an issue. Be cautious and always leave the power and clock running after probe. | ||||
| CVE-2026-43231 | 1 Linux | 1 Linux Kernel | 2026-05-08 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: media: radio-keene: fix memory leak in error path Fix a memory leak in usb_keene_probe(). The v4l2 control handler is initialized and controls are added, but if v4l2_device_register() or video_register_device() fails afterward, the handler was never freed, leaking memory. Add v4l2_ctrl_handler_free() call in the err_v4l2 error path to ensure the control handler is properly freed for all error paths after it is initialized. | ||||
| CVE-2026-43229 | 1 Linux | 1 Linux Kernel | 2026-05-08 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: media: chips-media: wave5: Fix device cleanup order to prevent kernel panic Move video device unregistration to the beginning of the remove function to ensure all video operations are stopped before cleaning up the worker thread and disabling PM runtime. This prevents hardware register access after the device has been powered down. In polling mode, the hrtimer periodically triggers wave5_vpu_timer_callback() which queues work to the kthread worker. The worker executes wave5_vpu_irq_work_fn() which reads hardware registers via wave5_vdi_read_register(). The original cleanup order disabled PM runtime and powered down hardware before unregistering video devices. When autosuspend triggers and powers off the hardware, the video devices are still registered and the worker thread can still be triggered by the hrtimer, causing it to attempt reading registers from powered-off hardware. This results in a bus error (synchronous external abort) and kernel panic. This causes random kernel panics during encoding operations: Internal error: synchronous external abort: 0000000096000010 [#1] PREEMPT SMP Modules linked in: wave5 rpmsg_ctrl rpmsg_char ... CPU: 0 UID: 0 PID: 1520 Comm: vpu_irq_thread Tainted: G M W pc : wave5_vdi_read_register+0x10/0x38 [wave5] lr : wave5_vpu_irq_work_fn+0x28/0x60 [wave5] Call trace: wave5_vdi_read_register+0x10/0x38 [wave5] kthread_worker_fn+0xd8/0x238 kthread+0x104/0x120 ret_from_fork+0x10/0x20 Code: aa1e03e9 d503201f f9416800 8b214000 (b9400000) ---[ end trace 0000000000000000 ]--- Kernel panic - not syncing: synchronous external abort: Fatal exception | ||||
| CVE-2026-43267 | 1 Linux | 1 Linux Kernel | 2026-05-08 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: wifi: rtw89: fix potential zero beacon interval in beacon tracking During fuzz testing, it was discovered that bss_conf->beacon_int might be zero, which could result in a division by zero error in subsequent calculations. Set a default value of 100 TU if the interval is zero to ensure stability. | ||||
| CVE-2026-43268 | 1 Linux | 1 Linux Kernel | 2026-05-08 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: hfsplus: pretend special inodes as regular files Since commit af153bb63a33 ("vfs: catch invalid modes in may_open()") requires any inode be one of S_IFDIR/S_IFLNK/S_IFREG/S_IFCHR/S_IFBLK/ S_IFIFO/S_IFSOCK type, use S_IFREG for special inodes. | ||||
| CVE-2026-43034 | 1 Linux | 1 Linux Kernel | 2026-05-08 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: bnxt_en: set backing store type from query type bnxt_hwrm_func_backing_store_qcaps_v2() stores resp->type from the firmware response in ctxm->type and later uses that value to index fixed backing-store metadata arrays such as ctx_arr[] and bnxt_bstore_to_trace[]. ctxm->type is fixed by the current backing-store query type and matches the array index of ctx->ctx_arr. Set ctxm->type from the current loop variable instead of depending on resp->type. Also update the loop to advance type from next_valid_type in the for statement, which keeps the control flow simpler for non-valid and unchanged entries. | ||||
| CVE-2026-43117 | 1 Linux | 1 Linux Kernel | 2026-05-08 | 9.1 Critical |
| In the Linux kernel, the following vulnerability has been resolved: btrfs: tracepoints: get correct superblock from dentry in event btrfs_sync_file() If overlay is used on top of btrfs, dentry->d_sb translates to overlay's super block and fsid assignment will lead to a crash. Use file_inode(file)->i_sb to always get btrfs_sb. | ||||
| CVE-2026-43132 | 1 Linux | 1 Linux Kernel | 2026-05-08 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: dm-verity: correctly handle dm_bufio_client_create() failure If either of the calls to dm_bufio_client_create() in verity_fec_ctr() fails, then dm_bufio_client_destroy() is later called with an ERR_PTR() argument. That causes a crash. Fix this. | ||||
| CVE-2026-41506 | 1 Go-git | 1 Go-git | 2026-05-08 | 4.7 Medium |
| go-git is an extensible git implementation library written in pure Go. Prior to versions 5.18.0 and 6.0.0-alpha.2, go-git may leak HTTP authentication credentials when following redirects during smart-HTTP clone and fetch operations. This issue has been patched in versions 5.18.0 and 6.0.0-alpha.2. | ||||
| CVE-2026-43266 | 1 Linux | 2 Kernel, Linux Kernel | 2026-05-08 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: EFI/CPER: don't go past the ARM processor CPER record buffer There's a logic inside GHES/CPER to detect if the section_length is too small, but it doesn't detect if it is too big. Currently, if the firmware receives an ARM processor CPER record stating that a section length is big, kernel will blindly trust section_length, producing a very long dump. For instance, a 67 bytes record with ERR_INFO_NUM set 46198 and section length set to 854918320 would dump a lot of data going a way past the firmware memory-mapped area. Fix it by adding a logic to prevent it to go past the buffer if ERR_INFO_NUM is too big, making it report instead: [Hardware Error]: Hardware error from APEI Generic Hardware Error Source: 1 [Hardware Error]: event severity: recoverable [Hardware Error]: Error 0, type: recoverable [Hardware Error]: section_type: ARM processor error [Hardware Error]: MIDR: 0xff304b2f8476870a [Hardware Error]: section length: 854918320, CPER size: 67 [Hardware Error]: section length is too big [Hardware Error]: firmware-generated error record is incorrect [Hardware Error]: ERR_INFO_NUM is 46198 [ rjw: Subject and changelog tweaks ] | ||||
| CVE-2025-63705 | 1 Node Ts Ocr | 1 Node Ts Ocr | 2026-05-08 | 8.8 High |
| NPM package node-ts-ocr 1.0.15 is vulnerable to OS Command Injection via the invokeImageOcr function in src/index.js. | ||||
| CVE-2026-39820 | 1 Go Standard Library | 1 Net/mail | 2026-05-08 | 7.5 High |
| Well-crafted inputs reaching ParseAddress, ParseAddressList, and ParseDate were able to trigger excessive CPU exhaustion and memory allocations. | ||||
| CVE-2024-33722 | 2026-05-08 | 6.3 Medium | ||
| SOPlanning 1.52.00 is vulnerable to SQL Injection by an authenticated user via projets.php with statut[]. | ||||
| CVE-2022-26523 | 2026-05-08 | 5.3 Medium | ||
| The socket connection handler in aswArPot.sys in the Avast and AVG Windows Anti Rootkit driver before 22.1 allows local attackers to execute arbitrary code in kernel mode or cause a denial of service (memory corruption and OS crash) due to a double fetch vulnerability at aswArPot+0xbb94. | ||||
| CVE-2023-42343 | 1 Alkacon | 1 Opencms | 2026-05-08 | 6.1 Medium |
| A Cross Site Scripting vulnerability in Alkacon OpenCms before 10.5.1 exists via cmis-online/type. | ||||
| CVE-2026-37431 | 2026-05-08 | 9.8 Critical | ||
| Beauty Parlour Management System v1.1 was discovered to contain a SQL injection vulnerability via the aptnumber parameter in the /appointment-detail.php endpoint. This vulnerability allows attackers to access sensitive database information via a crafted SQL statement. | ||||