| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
vfio/type1: fix cap_migration information leak
Fix an information leak where an uninitialized hole in struct
vfio_iommu_type1_info_cap_migration on the stack is exposed to userspace.
The definition of struct vfio_iommu_type1_info_cap_migration contains a hole as
shown in this pahole(1) output:
struct vfio_iommu_type1_info_cap_migration {
struct vfio_info_cap_header header; /* 0 8 */
__u32 flags; /* 8 4 */
/* XXX 4 bytes hole, try to pack */
__u64 pgsize_bitmap; /* 16 8 */
__u64 max_dirty_bitmap_size; /* 24 8 */
/* size: 32, cachelines: 1, members: 4 */
/* sum members: 28, holes: 1, sum holes: 4 */
/* last cacheline: 32 bytes */
};
The cap_mig variable is filled in without initializing the hole:
static int vfio_iommu_migration_build_caps(struct vfio_iommu *iommu,
struct vfio_info_cap *caps)
{
struct vfio_iommu_type1_info_cap_migration cap_mig;
cap_mig.header.id = VFIO_IOMMU_TYPE1_INFO_CAP_MIGRATION;
cap_mig.header.version = 1;
cap_mig.flags = 0;
/* support minimum pgsize */
cap_mig.pgsize_bitmap = (size_t)1 << __ffs(iommu->pgsize_bitmap);
cap_mig.max_dirty_bitmap_size = DIRTY_BITMAP_SIZE_MAX;
return vfio_info_add_capability(caps, &cap_mig.header, sizeof(cap_mig));
}
The structure is then copied to a temporary location on the heap. At this point
it's already too late and ioctl(VFIO_IOMMU_GET_INFO) copies it to userspace
later:
int vfio_info_add_capability(struct vfio_info_cap *caps,
struct vfio_info_cap_header *cap, size_t size)
{
struct vfio_info_cap_header *header;
header = vfio_info_cap_add(caps, size, cap->id, cap->version);
if (IS_ERR(header))
return PTR_ERR(header);
memcpy(header + 1, cap + 1, size - sizeof(*header));
return 0;
}
This issue was found by code inspection. |
| A vulnerability has been identified in SIMATIC S7-1200 CPU V1 family (incl. SIPLUS variants) (All versions < V2.0.2), SIMATIC S7-1200 CPU V2 family (incl. SIPLUS variants) (All versions < V2.0.2). Affected controllers are vulnerable to capture-replay in the communication with the engineering software. This could allow an on-path attacker between the engineering software and the controller to execute any previously recorded commands at a later time (e.g. set the controller to STOP), regardless whether or not the controller had a password configured. |
| Kloxo versions 6.1.12 and earlier contain two setuid root binaries—lxsuexec and lxrestart—that allow local privilege escalation from uid 48. The lxsuexec binary performs a uid check and permits execution of arbitrary commands as root if the invoking user matches uid 48. This flaw enables attackers with Apache-level access to escalate privileges to root without authentication. |
| The RupsMon and USBMate services in UPSilon 2000 run with SYSTEM privileges and contain unquoted service paths. This allows a local attacker to perform path interception and escalate privileges if they have write permissions to the directories proceeding that of which the real service executables live in |
| XBMC version 11, including builds up to the 2012-11-04 nightly release, contains a path traversal vulnerability in its embedded HTTP server. When accessed via HTTP Basic Authentication, the server fails to properly sanitize URI input, allowing authenticated users to request files outside the intended document root. An attacker can exploit this flaw to read arbitrary files from the host filesystem, including sensitive configuration or credential files. |
| In the Linux kernel, the following vulnerability has been resolved:
nilfs2: fix WARNING in mark_buffer_dirty due to discarded buffer reuse
A syzbot stress test using a corrupted disk image reported that
mark_buffer_dirty() called from __nilfs_mark_inode_dirty() or
nilfs_palloc_commit_alloc_entry() may output a kernel warning, and can
panic if the kernel is booted with panic_on_warn.
This is because nilfs2 keeps buffer pointers in local structures for some
metadata and reuses them, but such buffers may be forcibly discarded by
nilfs_clear_dirty_page() in some critical situations.
This issue is reported to appear after commit 28a65b49eb53 ("nilfs2: do
not write dirty data after degenerating to read-only"), but the issue has
potentially existed before.
Fix this issue by checking the uptodate flag when attempting to reuse an
internally held buffer, and reloading the metadata instead of reusing the
buffer if the flag was lost. |
| Auxilium RateMyPet contains an unauthenticated arbitrary file upload vulnerability in upload_banners.php. The banner upload feature fails to validate file types or enforce authentication, allowing remote attackers to upload malicious PHP files. These files are stored in a web-accessible /banners/ directory and can be executed directly, resulting in remote code execution. |
| In the Linux kernel, the following vulnerability has been resolved:
media: mediatek: vcodec: fix resource leaks in vdec_msg_queue_init()
If we encounter any error in the vdec_msg_queue_init() then we need
to set "msg_queue->wdma_addr.size = 0;". Normally, this is done
inside the vdec_msg_queue_deinit() function. However, if the
first call to allocate &msg_queue->wdma_addr fails, then the
vdec_msg_queue_deinit() function is a no-op. For that situation, just
set the size to zero explicitly and return.
There were two other error paths which did not clean up before returning.
Change those error paths to goto mem_alloc_err. |
| A CWE-598 “Use of GET Request Method with Sensitive Query Strings” was discovered affecting the 130.8005 TCP/IP Gateway running firmware version 12h. Both the SHA-1 hash of the password as well as the session tokens are included as part of the URL and therefore exposed to information leakage scenarios. An attacker capable of accessing such values (e.g., victim browser, network traffic inspection) can exploit this vulnerability to leak both the password hash as well as session tokens and bypass the authentication mechanism using a pass-the-hash attack. |
| A vulnerability was found in Intelbras VIP S3020 G2, VIP S4020 G2, VIP S4020 G3 and VIP S4320 G2 up to 20241222 and classified as problematic. Affected by this issue is some unknown functionality of the file /web_caps/webCapsConfig of the component Web Interface. The manipulation leads to information disclosure. The attack may be launched remotely. The exploit has been disclosed to the public and may be used. The vendor assesses that "the information disclosed in the URL is not sensitive or poses any risk to the user". |
| Deserialization of Untrusted Data vulnerability in PickPlugins Question Answer question-answer allows Object Injection.This issue affects Question Answer: from n/a through <= 1.2.73. |
| Openfiler v2.x contains a command injection vulnerability in the system.html page. The device parameter is used to instantiate a NetworkCard object, whose constructor in network.inc calls exec() with unsanitized input. An authenticated attacker can exploit this to execute arbitrary commands as the openfiler user. Due to misconfigured sudoers, the openfiler user can escalate privileges to root via sudo /bin/bash without a password. |
| Default credentials vulnerability exists in SuprOS
product. If exploited, this could allow an authenticated
local attacker to use an admin account created during
product deployment. |
| During the AWS Client VPN client installation on Windows devices, the install process references the C:\usr\local\windows-x86_64-openssl-localbuild\ssl directory location to fetch the OpenSSL configuration file. As a result, a non-admin user could place arbitrary code in the configuration file. If an admin user starts the AWS Client VPN client installation process, that code could be executed with root-level privileges. This issue does not affect Linux or Mac devices.
We recommend users discontinue any new installations of AWS Client VPN on Windows prior to version 5.2.2. |
| The WP Crontrol plugin for WordPress is vulnerable to blind Server-Side Request Forgery in versions 1.17.0 to 1.19.1 via the 'wp_remote_request' function. This makes it possible for authenticated attackers, with Administrator-level access and above, to make web requests to arbitrary locations originating from the web application and can be used to query and modify information from internal services. |
| The Bitspecter Suite plugin for WordPress is vulnerable to Stored Cross-Site Scripting via SVG File uploads in all versions up to, and including, 1.0.0 due to insufficient input sanitization and output escaping. This makes it possible for authenticated attackers, with Author-level access and above, to inject arbitrary web scripts in pages that will execute whenever a user accesses the SVG file. |
| Improper Control of Generation of Code ('Code Injection') vulnerability in OpenText™ Carbonite Safe Server Backup allows Code Injection.
The vulnerability could be exploited through an open port, potentially allowing unauthorized access.
This issue affects Carbonite Safe Server Backup: through 6.8.3. |
| There is a potential OOB Write vulnerability in the gen_prov_start function in pb_adv.c. The full length of the received data is copied into the link.rx.buf receiver buffer without any validation on the data size. |
| Improper Control of Filename for Include/Require Statement in PHP Program ('PHP Remote File Inclusion') vulnerability in Stylemix Motors motors-car-dealership-classified-listings allows PHP Local File Inclusion.This issue affects Motors: from n/a through <= 1.4.71. |
| WAN Emulator v2.3 contains two unauthenticated command execution vulnerabilities. The result.php script calls shell_exec() with unsanitized input from the pc POST parameter, allowing remote attackers to execute arbitrary commands as the www-data user. The system also includes a SUID-root binary named dosu, which is vulnerable to command injection via its first argument. An attacker can exploit both flaws in sequence to achieve full remote code execution and escalate privileges to root. |
