| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
net/mlx5e: Release the label when replacing existing ct entry
Cited commit doesn't release the label mapping when replacing existing ct
entry which leads to following memleak report:
unreferenced object 0xffff8881854cf280 (size 96):
comm "kworker/u48:74", pid 23093, jiffies 4296664564 (age 175.944s)
hex dump (first 32 bytes):
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
backtrace:
[<000000002722d368>] __kmalloc+0x4b/0x1c0
[<00000000cc44e18f>] mapping_add+0x6e8/0xc90 [mlx5_core]
[<000000003ad942a7>] mlx5_get_label_mapping+0x66/0xe0 [mlx5_core]
[<00000000266308ac>] mlx5_tc_ct_entry_create_mod_hdr+0x1c4/0xf50 [mlx5_core]
[<000000009a768b4f>] mlx5_tc_ct_entry_add_rule+0x16f/0xaf0 [mlx5_core]
[<00000000a178f3e5>] mlx5_tc_ct_block_flow_offload_add+0x10cb/0x1f90 [mlx5_core]
[<000000007b46c496>] mlx5_tc_ct_block_flow_offload+0x14a/0x630 [mlx5_core]
[<00000000a9a18ac5>] nf_flow_offload_tuple+0x1a3/0x390 [nf_flow_table]
[<00000000d0881951>] flow_offload_work_handler+0x257/0xd30 [nf_flow_table]
[<000000009e4935a4>] process_one_work+0x7c2/0x13e0
[<00000000f5cd36a7>] worker_thread+0x59d/0xec0
[<00000000baed1daf>] kthread+0x28f/0x330
[<0000000063d282a4>] ret_from_fork+0x1f/0x30
Fix the issue by correctly releasing the label mapping. |
| In the Linux kernel, the following vulnerability has been resolved:
serial: arc_uart: fix of_iomap leak in `arc_serial_probe`
Smatch reports:
drivers/tty/serial/arc_uart.c:631 arc_serial_probe() warn:
'port->membase' from of_iomap() not released on lines: 631.
In arc_serial_probe(), if uart_add_one_port() fails,
port->membase is not released, which would cause a resource leak.
To fix this, I replace of_iomap with devm_platform_ioremap_resource. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: ath9k: Fix potential stack-out-of-bounds write in ath9k_wmi_rsp_callback()
Fix a stack-out-of-bounds write that occurs in a WMI response callback
function that is called after a timeout occurs in ath9k_wmi_cmd().
The callback writes to wmi->cmd_rsp_buf, a stack-allocated buffer that
could no longer be valid when a timeout occurs. Set wmi->last_seq_id to
0 when a timeout occurred.
Found by a modified version of syzkaller.
BUG: KASAN: stack-out-of-bounds in ath9k_wmi_ctrl_rx
Write of size 4
Call Trace:
memcpy
ath9k_wmi_ctrl_rx
ath9k_htc_rx_msg
ath9k_hif_usb_reg_in_cb
__usb_hcd_giveback_urb
usb_hcd_giveback_urb
dummy_timer
call_timer_fn
run_timer_softirq
__do_softirq
irq_exit_rcu
sysvec_apic_timer_interrupt |
| In the Linux kernel, the following vulnerability has been resolved:
net: fix skb leak in __skb_tstamp_tx()
Commit 50749f2dd685 ("tcp/udp: Fix memleaks of sk and zerocopy skbs with
TX timestamp.") added a call to skb_orphan_frags_rx() to fix leaks with
zerocopy skbs. But it ended up adding a leak of its own. When
skb_orphan_frags_rx() fails, the function just returns, leaking the skb
it just cloned. Free it before returning.
This bug was discovered and resolved using Coverity Static Analysis
Security Testing (SAST) by Synopsys, Inc. |
| In the Linux kernel, the following vulnerability has been resolved:
arm64: sme: Use STR P to clear FFR context field in streaming SVE mode
The FFR is a predicate register which can vary between 16 and 256 bits
in size depending upon the configured vector length. When saving the
SVE state in streaming SVE mode, the FFR register is inaccessible and
so commit 9f5848665788 ("arm64/sve: Make access to FFR optional") simply
clears the FFR field of the in-memory context structure. Unfortunately,
it achieves this using an unconditional 8-byte store and so if the SME
vector length is anything other than 64 bytes in size we will either
fail to clear the entire field or, worse, we will corrupt memory
immediately following the structure. This has led to intermittent kfence
splats in CI [1] and can trigger kmalloc Redzone corruption messages
when running the 'fp-stress' kselftest:
| =============================================================================
| BUG kmalloc-1k (Not tainted): kmalloc Redzone overwritten
| -----------------------------------------------------------------------------
|
| 0xffff000809bf1e22-0xffff000809bf1e27 @offset=7714. First byte 0x0 instead of 0xcc
| Allocated in do_sme_acc+0x9c/0x220 age=2613 cpu=1 pid=531
| __kmalloc+0x8c/0xcc
| do_sme_acc+0x9c/0x220
| ...
Replace the 8-byte store with a store of a predicate register which has
been zero-initialised with PFALSE, ensuring that the entire field is
cleared in memory.
[1] https://lore.kernel.org/r/CA+G9fYtU7HsV0R0dp4XEH5xXHSJFw8KyDf5VQrLLfMxWfxQkag@mail.gmail.com |
| In the Linux kernel, the following vulnerability has been resolved:
NFS: Fix a potential data corruption
We must ensure that the subrequests are joined back into the head before
we can retransmit a request. If the head was not on the commit lists,
because the server wrote it synchronously, we still need to add it back
to the retransmission list.
Add a call that mirrors the effect of nfs_cancel_remove_inode() for
O_DIRECT. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: mt76: mt7921: fix error code of return in mt7921_acpi_read
Kernel NULL pointer dereference when ACPI SAR table isn't implemented well.
Fix the error code of return to mark the ACPI SAR table as invalid.
[ 5.077128] mt7921e 0000:06:00.0: sar cnt = 0
[ 5.077381] BUG: kernel NULL pointer dereference, address:
0000000000000004
[ 5.077630] #PF: supervisor read access in kernel mode
[ 5.077883] #PF: error_code(0x0000) - not-present page
[ 5.078138] PGD 0 P4D 0
[ 5.078398] Oops: 0000 [#1] PREEMPT SMP NOPTI
[ 5.079202] RIP: 0010:mt7921_init_acpi_sar+0x106/0x220
[mt7921_common]
...
[ 5.080786] Call Trace:
[ 5.080786] <TASK>
[ 5.080786] mt7921_register_device+0x37d/0x490 [mt7921_common]
[ 5.080786] mt7921_pci_probe.part.0+0x2ee/0x310 [mt7921e]
[ 5.080786] mt7921_pci_probe+0x52/0x70 [mt7921e]
[ 5.080786] local_pci_probe+0x47/0x90
[ 5.080786] pci_call_probe+0x55/0x190
[ 5.080786] pci_device_probe+0x84/0x120 |
| In the Linux kernel, the following vulnerability has been resolved:
ring-buffer: Handle race between rb_move_tail and rb_check_pages
It seems a data race between ring_buffer writing and integrity check.
That is, RB_FLAG of head_page is been updating, while at same time
RB_FLAG was cleared when doing integrity check rb_check_pages():
rb_check_pages() rb_handle_head_page():
-------- --------
rb_head_page_deactivate()
rb_head_page_set_normal()
rb_head_page_activate()
We do intergrity test of the list to check if the list is corrupted and
it is still worth doing it. So, let's refactor rb_check_pages() such that
we no longer clear and set flag during the list sanity checking.
[1] and [2] are the test to reproduce and the crash report respectively.
1:
``` read_trace.sh
while true;
do
# the "trace" file is closed after read
head -1 /sys/kernel/tracing/trace > /dev/null
done
```
``` repro.sh
sysctl -w kernel.panic_on_warn=1
# function tracer will writing enough data into ring_buffer
echo function > /sys/kernel/tracing/current_tracer
./read_trace.sh &
./read_trace.sh &
./read_trace.sh &
./read_trace.sh &
./read_trace.sh &
./read_trace.sh &
./read_trace.sh &
./read_trace.sh &
```
2:
------------[ cut here ]------------
WARNING: CPU: 9 PID: 62 at kernel/trace/ring_buffer.c:2653
rb_move_tail+0x450/0x470
Modules linked in:
CPU: 9 PID: 62 Comm: ksoftirqd/9 Tainted: G W 6.2.0-rc6+
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS
rel-1.15.0-0-g2dd4b9b3f840-prebuilt.qemu.org 04/01/2014
RIP: 0010:rb_move_tail+0x450/0x470
Code: ff ff 4c 89 c8 f0 4d 0f b1 02 48 89 c2 48 83 e2 fc 49 39 d0 75 24
83 e0 03 83 f8 02 0f 84 e1 fb ff ff 48 8b 57 10 f0 ff 42 08 <0f> 0b 83
f8 02 0f 84 ce fb ff ff e9 db
RSP: 0018:ffffb5564089bd00 EFLAGS: 00000203
RAX: 0000000000000000 RBX: ffff9db385a2bf81 RCX: ffffb5564089bd18
RDX: ffff9db281110100 RSI: 0000000000000fe4 RDI: ffff9db380145400
RBP: ffff9db385a2bf80 R08: ffff9db385a2bfc0 R09: ffff9db385a2bfc2
R10: ffff9db385a6c000 R11: ffff9db385a2bf80 R12: 0000000000000000
R13: 00000000000003e8 R14: ffff9db281110100 R15: ffffffffbb006108
FS: 0000000000000000(0000) GS:ffff9db3bdcc0000(0000)
knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00005602323024c8 CR3: 0000000022e0c000 CR4: 00000000000006e0
Call Trace:
<TASK>
ring_buffer_lock_reserve+0x136/0x360
? __do_softirq+0x287/0x2df
? __pfx_rcu_softirq_qs+0x10/0x10
trace_function+0x21/0x110
? __pfx_rcu_softirq_qs+0x10/0x10
? __do_softirq+0x287/0x2df
function_trace_call+0xf6/0x120
0xffffffffc038f097
? rcu_softirq_qs+0x5/0x140
rcu_softirq_qs+0x5/0x140
__do_softirq+0x287/0x2df
run_ksoftirqd+0x2a/0x30
smpboot_thread_fn+0x188/0x220
? __pfx_smpboot_thread_fn+0x10/0x10
kthread+0xe7/0x110
? __pfx_kthread+0x10/0x10
ret_from_fork+0x2c/0x50
</TASK>
---[ end trace 0000000000000000 ]---
[ crash report and test reproducer credit goes to Zheng Yejian] |
| In the Linux kernel, the following vulnerability has been resolved:
mm/vmemmap/devdax: fix kernel crash when probing devdax devices
commit 4917f55b4ef9 ("mm/sparse-vmemmap: improve memory savings for
compound devmaps") added support for using optimized vmmemap for devdax
devices. But how vmemmap mappings are created are architecture specific.
For example, powerpc with hash translation doesn't have vmemmap mappings
in init_mm page table instead they are bolted table entries in the
hardware page table
vmemmap_populate_compound_pages() used by vmemmap optimization code is not
aware of these architecture-specific mapping. Hence allow architecture to
opt for this feature. I selected architectures supporting
HUGETLB_PAGE_OPTIMIZE_VMEMMAP option as also supporting this feature.
This patch fixes the below crash on ppc64.
BUG: Unable to handle kernel data access on write at 0xc00c000100400038
Faulting instruction address: 0xc000000001269d90
Oops: Kernel access of bad area, sig: 11 [#1]
LE PAGE_SIZE=64K MMU=Hash SMP NR_CPUS=2048 NUMA pSeries
Modules linked in:
CPU: 7 PID: 1 Comm: swapper/0 Not tainted 6.3.0-rc5-150500.34-default+ #2 5c90a668b6bbd142599890245c2fb5de19d7d28a
Hardware name: IBM,9009-42G POWER9 (raw) 0x4e0202 0xf000005 of:IBM,FW950.40 (VL950_099) hv:phyp pSeries
NIP: c000000001269d90 LR: c0000000004c57d4 CTR: 0000000000000000
REGS: c000000003632c30 TRAP: 0300 Not tainted (6.3.0-rc5-150500.34-default+)
MSR: 8000000000009033 <SF,EE,ME,IR,DR,RI,LE> CR: 24842228 XER: 00000000
CFAR: c0000000004c57d0 DAR: c00c000100400038 DSISR: 42000000 IRQMASK: 0
....
NIP [c000000001269d90] __init_single_page.isra.74+0x14/0x4c
LR [c0000000004c57d4] __init_zone_device_page+0x44/0xd0
Call Trace:
[c000000003632ed0] [c000000003632f60] 0xc000000003632f60 (unreliable)
[c000000003632f10] [c0000000004c5ca0] memmap_init_zone_device+0x170/0x250
[c000000003632fe0] [c0000000005575f8] memremap_pages+0x2c8/0x7f0
[c0000000036330c0] [c000000000557b5c] devm_memremap_pages+0x3c/0xa0
[c000000003633100] [c000000000d458a8] dev_dax_probe+0x108/0x3e0
[c0000000036331a0] [c000000000d41430] dax_bus_probe+0xb0/0x140
[c0000000036331d0] [c000000000cef27c] really_probe+0x19c/0x520
[c000000003633260] [c000000000cef6b4] __driver_probe_device+0xb4/0x230
[c0000000036332e0] [c000000000cef888] driver_probe_device+0x58/0x120
[c000000003633320] [c000000000cefa6c] __device_attach_driver+0x11c/0x1e0
[c0000000036333a0] [c000000000cebc58] bus_for_each_drv+0xa8/0x130
[c000000003633400] [c000000000ceefcc] __device_attach+0x15c/0x250
[c0000000036334a0] [c000000000ced458] bus_probe_device+0x108/0x110
[c0000000036334f0] [c000000000ce92dc] device_add+0x7fc/0xa10
[c0000000036335b0] [c000000000d447c8] devm_create_dev_dax+0x1d8/0x530
[c000000003633640] [c000000000d46b60] __dax_pmem_probe+0x200/0x270
[c0000000036337b0] [c000000000d46bf0] dax_pmem_probe+0x20/0x70
[c0000000036337d0] [c000000000d2279c] nvdimm_bus_probe+0xac/0x2b0
[c000000003633860] [c000000000cef27c] really_probe+0x19c/0x520
[c0000000036338f0] [c000000000cef6b4] __driver_probe_device+0xb4/0x230
[c000000003633970] [c000000000cef888] driver_probe_device+0x58/0x120
[c0000000036339b0] [c000000000cefd08] __driver_attach+0x1d8/0x240
[c000000003633a30] [c000000000cebb04] bus_for_each_dev+0xb4/0x130
[c000000003633a90] [c000000000cee564] driver_attach+0x34/0x50
[c000000003633ab0] [c000000000ced878] bus_add_driver+0x218/0x300
[c000000003633b40] [c000000000cf1144] driver_register+0xa4/0x1b0
[c000000003633bb0] [c000000000d21a0c] __nd_driver_register+0x5c/0x100
[c000000003633c10] [c00000000206a2e8] dax_pmem_init+0x34/0x48
[c000000003633c30] [c0000000000132d0] do_one_initcall+0x60/0x320
[c000000003633d00] [c0000000020051b0] kernel_init_freeable+0x360/0x400
[c000000003633de0] [c000000000013764] kernel_init+0x34/0x1d0
[c000000003633e50] [c00000000000de14] ret_from_kernel_thread+0x5c/0x64 |
| In the Linux kernel, the following vulnerability has been resolved:
ipv6: Fix out-of-bounds access in ipv6_find_tlv()
optlen is fetched without checking whether there is more than one byte to parse.
It can lead to out-of-bounds access.
Found by InfoTeCS on behalf of Linux Verification Center
(linuxtesting.org) with SVACE. |
| In the Linux kernel, the following vulnerability has been resolved:
clk: imx: clk-imx8mp: improve error handling in imx8mp_clocks_probe()
Replace of_iomap() and kzalloc() with devm_of_iomap() and devm_kzalloc()
which can automatically release the related memory when the device
or driver is removed or unloaded to avoid potential memory leak.
In this case, iounmap(anatop_base) in line 427,433 are removed
as manual release is not required.
Besides, referring to clk-imx8mq.c, check the return code of
of_clk_add_hw_provider, if it returns negtive, print error info
and unregister hws, which makes the program more robust. |
| In the Linux kernel, the following vulnerability has been resolved:
HID: amd_sfh: Fix for shift-out-of-bounds
Shift operation of 'exp' and 'shift' variables exceeds the maximum number
of shift values in the u32 range leading to UBSAN shift-out-of-bounds.
...
[ 6.120512] UBSAN: shift-out-of-bounds in drivers/hid/amd-sfh-hid/sfh1_1/amd_sfh_desc.c:149:50
[ 6.120598] shift exponent 104 is too large for 64-bit type 'long unsigned int'
[ 6.120659] CPU: 4 PID: 96 Comm: kworker/4:1 Not tainted 6.4.0amd_1-next-20230519-dirty #10
[ 6.120665] Hardware name: AMD Birman-PHX/Birman-PHX, BIOS SFH_with_HPD_SEN.FD 04/05/2023
[ 6.120667] Workqueue: events amd_sfh_work_buffer [amd_sfh]
[ 6.120687] Call Trace:
[ 6.120690] <TASK>
[ 6.120694] dump_stack_lvl+0x48/0x70
[ 6.120704] dump_stack+0x10/0x20
[ 6.120707] ubsan_epilogue+0x9/0x40
[ 6.120716] __ubsan_handle_shift_out_of_bounds+0x10f/0x170
[ 6.120720] ? psi_group_change+0x25f/0x4b0
[ 6.120729] float_to_int.cold+0x18/0xba [amd_sfh]
[ 6.120739] get_input_rep+0x57/0x340 [amd_sfh]
[ 6.120748] ? __schedule+0xba7/0x1b60
[ 6.120756] ? __pfx_get_input_rep+0x10/0x10 [amd_sfh]
[ 6.120764] amd_sfh_work_buffer+0x91/0x180 [amd_sfh]
[ 6.120772] process_one_work+0x229/0x430
[ 6.120780] worker_thread+0x4a/0x3c0
[ 6.120784] ? __pfx_worker_thread+0x10/0x10
[ 6.120788] kthread+0xf7/0x130
[ 6.120792] ? __pfx_kthread+0x10/0x10
[ 6.120795] ret_from_fork+0x29/0x50
[ 6.120804] </TASK>
...
Fix this by adding the condition to validate shift ranges. |
| In the Linux kernel, the following vulnerability has been resolved:
s390/crypto: use vector instructions only if available for ChaCha20
Commit 349d03ffd5f6 ("crypto: s390 - add crypto library interface for
ChaCha20") added a library interface to the s390 specific ChaCha20
implementation. However no check was added to verify if the required
facilities are installed before branching into the assembler code.
If compiled into the kernel, this will lead to the following crash,
if vector instructions are not available:
data exception: 0007 ilc:3 [#1] SMP
Modules linked in:
CPU: 0 PID: 1 Comm: swapper/0 Not tainted 6.3.0-rc7+ #11
Hardware name: IBM 3931 A01 704 (KVM/Linux)
Krnl PSW : 0704e00180000000 000000001857277a (chacha20_vx+0x32/0x818)
R:0 T:1 IO:1 EX:1 Key:0 M:1 W:0 P:0 AS:3 CC:2 PM:0 RI:0 EA:3
Krnl GPRS: 0000037f0000000a ffffffffffffff60 000000008184b000 0000000019f5c8e6
0000000000000109 0000037fffb13c58 0000037fffb13c78 0000000019bb1780
0000037fffb13c58 0000000019f5c8e6 000000008184b000 0000000000000109
00000000802d8000 0000000000000109 0000000018571ebc 0000037fffb13718
Krnl Code: 000000001857276a: c07000b1f80b larl %r7,0000000019bb1780
0000000018572770: a708000a lhi %r0,10
#0000000018572774: e78950000c36 vlm %v24,%v25,0(%r5),0
>000000001857277a: e7a060000806 vl %v26,0(%r6),0
0000000018572780: e7bf70004c36 vlm %v27,%v31,0(%r7),4
0000000018572786: e70b00000456 vlr %v0,%v27
000000001857278c: e71800000456 vlr %v1,%v24
0000000018572792: e74b00000456 vlr %v4,%v27
Call Trace:
[<000000001857277a>] chacha20_vx+0x32/0x818
Last Breaking-Event-Address:
[<0000000018571eb6>] chacha20_crypt_s390.constprop.0+0x6e/0xd8
---[ end trace 0000000000000000 ]---
Kernel panic - not syncing: Attempted to kill init! exitcode=0x0000000b
Fix this by adding a missing MACHINE_HAS_VX check.
[agordeev@linux.ibm.com: remove duplicates in commit message] |
| In the Linux kernel, the following vulnerability has been resolved:
media: max9286: Fix memleak in max9286_v4l2_register()
There is a kmemleak when testing the media/i2c/max9286.c with bpf mock
device:
kmemleak: 5 new suspected memory leaks (see /sys/kernel/debug/kmemleak)
unreferenced object 0xffff88810defc400 (size 256):
comm "python3", pid 278, jiffies 4294737563 (age 31.978s)
hex dump (first 32 bytes):
28 06 a7 0a 81 88 ff ff 00 fe 22 12 81 88 ff ff (.........".....
10 c4 ef 0d 81 88 ff ff 10 c4 ef 0d 81 88 ff ff ................
backtrace:
[<00000000191de6a7>] __kmalloc_node+0x44/0x1b0
[<000000002f4912b7>] kvmalloc_node+0x34/0x180
[<0000000057dc4cae>] v4l2_ctrl_new+0x325/0x10f0 [videodev]
[<0000000026030272>] v4l2_ctrl_new_std+0x16f/0x210 [videodev]
[<00000000f0d9ea2f>] max9286_probe+0x76e/0xbff [max9286]
[<00000000ea8f6455>] i2c_device_probe+0x28d/0x680
[<0000000087529af3>] really_probe+0x17c/0x3f0
[<00000000b08be526>] __driver_probe_device+0xe3/0x170
[<000000004382edea>] driver_probe_device+0x49/0x120
[<000000007bde528a>] __device_attach_driver+0xf7/0x150
[<000000009f9c6ab4>] bus_for_each_drv+0x114/0x180
[<00000000c8aaf588>] __device_attach+0x1e5/0x2d0
[<0000000041cc06b9>] bus_probe_device+0x126/0x140
[<000000002309860d>] device_add+0x810/0x1130
[<000000002827bf98>] i2c_new_client_device+0x359/0x4f0
[<00000000593bdc85>] of_i2c_register_device+0xf1/0x110
max9286_v4l2_register() calls v4l2_ctrl_new_std(), but won't free the
created v412_ctrl when fwnode_graph_get_endpoint_by_id() failed, which
causes the memleak. Call v4l2_ctrl_handler_free() to free the v412_ctrl. |
| In the Linux kernel, the following vulnerability has been resolved:
riscv: move memblock_allow_resize() after linear mapping is ready
The initial memblock metadata is accessed from kernel image mapping. The
regions arrays need to "reallocated" from memblock and accessed through
linear mapping to cover more memblock regions. So the resizing should
not be allowed until linear mapping is ready. Note that there are
memblock allocations when building linear mapping.
This patch is similar to 24cc61d8cb5a ("arm64: memblock: don't permit
memblock resizing until linear mapping is up").
In following log, many memblock regions are reserved before
create_linear_mapping_page_table(). And then it triggered reallocation
of memblock.reserved.regions and memcpy the old array in kernel image
mapping to the new array in linear mapping which caused a page fault.
[ 0.000000] memblock_reserve: [0x00000000bf01f000-0x00000000bf01ffff] early_init_fdt_scan_reserved_mem+0x28c/0x2c6
[ 0.000000] memblock_reserve: [0x00000000bf021000-0x00000000bf021fff] early_init_fdt_scan_reserved_mem+0x28c/0x2c6
[ 0.000000] memblock_reserve: [0x00000000bf023000-0x00000000bf023fff] early_init_fdt_scan_reserved_mem+0x28c/0x2c6
[ 0.000000] memblock_reserve: [0x00000000bf025000-0x00000000bf025fff] early_init_fdt_scan_reserved_mem+0x28c/0x2c6
[ 0.000000] memblock_reserve: [0x00000000bf027000-0x00000000bf027fff] early_init_fdt_scan_reserved_mem+0x28c/0x2c6
[ 0.000000] memblock_reserve: [0x00000000bf029000-0x00000000bf029fff] early_init_fdt_scan_reserved_mem+0x28c/0x2c6
[ 0.000000] memblock_reserve: [0x00000000bf02b000-0x00000000bf02bfff] early_init_fdt_scan_reserved_mem+0x28c/0x2c6
[ 0.000000] memblock_reserve: [0x00000000bf02d000-0x00000000bf02dfff] early_init_fdt_scan_reserved_mem+0x28c/0x2c6
[ 0.000000] memblock_reserve: [0x00000000bf02f000-0x00000000bf02ffff] early_init_fdt_scan_reserved_mem+0x28c/0x2c6
[ 0.000000] memblock_reserve: [0x00000000bf030000-0x00000000bf030fff] early_init_fdt_scan_reserved_mem+0x28c/0x2c6
[ 0.000000] OF: reserved mem: 0x0000000080000000..0x000000008007ffff (512 KiB) map non-reusable mmode_resv0@80000000
[ 0.000000] memblock_reserve: [0x00000000bf000000-0x00000000bf001fed] paging_init+0x19a/0x5ae
[ 0.000000] memblock_phys_alloc_range: 4096 bytes align=0x1000 from=0x0000000000000000 max_addr=0x0000000000000000 alloc_pmd_fixmap+0x14/0x1c
[ 0.000000] memblock_reserve: [0x000000017ffff000-0x000000017fffffff] memblock_alloc_range_nid+0xb8/0x128
[ 0.000000] memblock: reserved is doubled to 256 at [0x000000017fffd000-0x000000017fffe7ff]
[ 0.000000] Unable to handle kernel paging request at virtual address ff600000ffffd000
[ 0.000000] Oops [#1]
[ 0.000000] Modules linked in:
[ 0.000000] CPU: 0 PID: 0 Comm: swapper Not tainted 6.4.0-rc1-00011-g99a670b2069c #66
[ 0.000000] Hardware name: riscv-virtio,qemu (DT)
[ 0.000000] epc : __memcpy+0x60/0xf8
[ 0.000000] ra : memblock_double_array+0x192/0x248
[ 0.000000] epc : ffffffff8081d214 ra : ffffffff80a3dfc0 sp : ffffffff81403bd0
[ 0.000000] gp : ffffffff814fbb38 tp : ffffffff8140dac0 t0 : 0000000001600000
[ 0.000000] t1 : 0000000000000000 t2 : 000000008f001000 s0 : ffffffff81403c60
[ 0.000000] s1 : ffffffff80c0bc98 a0 : ff600000ffffd000 a1 : ffffffff80c0bcd8
[ 0.000000] a2 : 0000000000000c00 a3 : ffffffff80c0c8d8 a4 : 0000000080000000
[ 0.000000] a5 : 0000000000080000 a6 : 0000000000000000 a7 : 0000000080200000
[ 0.000000] s2 : ff600000ffffd000 s3 : 0000000000002000 s4 : 0000000000000c00
[ 0.000000] s5 : ffffffff80c0bc60 s6 : ffffffff80c0bcc8 s7 : 0000000000000000
[ 0.000000] s8 : ffffffff814fd0a8 s9 : 000000017fffe7ff s10: 0000000000000000
[ 0.000000] s11: 0000000000001000 t3 : 0000000000001000 t4 : 0000000000000000
[ 0.000000] t5 : 000000008f003000 t6 : ff600000ffffd000
[ 0.000000] status: 0000000200000100 badaddr: ff600000ffffd000 cause: 000000000000000f
[ 0.000000] [<fff
---truncated--- |
| In the Linux kernel, the following vulnerability has been resolved:
xsk: fix refcount underflow in error path
Fix a refcount underflow problem reported by syzbot that can happen
when a system is running out of memory. If xp_alloc_tx_descs() fails,
and it can only fail due to not having enough memory, then the error
path is triggered. In this error path, the refcount of the pool is
decremented as it has incremented before. However, the reference to
the pool in the socket was not nulled. This means that when the socket
is closed later, the socket teardown logic will think that there is a
pool attached to the socket and try to decrease the refcount again,
leading to a refcount underflow.
I chose this fix as it involved adding just a single line. Another
option would have been to move xp_get_pool() and the assignment of
xs->pool to after the if-statement and using xs_umem->pool instead of
xs->pool in the whole if-statement resulting in somewhat simpler code,
but this would have led to much more churn in the code base perhaps
making it harder to backport. |
| In the Linux kernel, the following vulnerability has been resolved:
nvdimm: Fix memleak of pmu attr_groups in unregister_nvdimm_pmu()
Memory pointed by 'nd_pmu->pmu.attr_groups' is allocated in function
'register_nvdimm_pmu' and is lost after 'kfree(nd_pmu)' call in function
'unregister_nvdimm_pmu'. |
| In the Linux kernel, the following vulnerability has been resolved:
scsi: qla2xxx: Fix memory leak in qla2x00_probe_one()
There is a memory leak reported by kmemleak:
unreferenced object 0xffffc900003f0000 (size 12288):
comm "modprobe", pid 19117, jiffies 4299751452 (age 42490.264s)
hex dump (first 32 bytes):
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
backtrace:
[<00000000629261a8>] __vmalloc_node_range+0xe56/0x1110
[<0000000001906886>] __vmalloc_node+0xbd/0x150
[<000000005bb4dc34>] vmalloc+0x25/0x30
[<00000000a2dc1194>] qla2x00_create_host+0x7a0/0xe30 [qla2xxx]
[<0000000062b14b47>] qla2x00_probe_one+0x2eb8/0xd160 [qla2xxx]
[<00000000641ccc04>] local_pci_probe+0xeb/0x1a0
The root cause is traced to an error-handling path in qla2x00_probe_one()
when the adapter "base_vha" initialize failed. The fab_scan_rp "scan.l" is
used to record the port information and it is allocated in
qla2x00_create_host(). However, it is not released in the error handling
path "probe_failed".
Fix this by freeing the memory of "scan.l" when an error occurs in the
adapter initialization process. |
| In the Linux kernel, the following vulnerability has been resolved:
riscv: ftrace: Fixup panic by disabling preemption
In RISCV, we must use an AUIPC + JALR pair to encode an immediate,
forming a jump that jumps to an address over 4K. This may cause errors
if we want to enable kernel preemption and remove dependency from
patching code with stop_machine(). For example, if a task was switched
out on auipc. And, if we changed the ftrace function before it was
switched back, then it would jump to an address that has updated 11:0
bits mixing with previous XLEN:12 part.
p: patched area performed by dynamic ftrace
ftrace_prologue:
p| REG_S ra, -SZREG(sp)
p| auipc ra, 0x? ------------> preempted
...
change ftrace function
...
p| jalr -?(ra) <------------- switched back
p| REG_L ra, -SZREG(sp)
func:
xxx
ret |
| In the Linux kernel, the following vulnerability has been resolved:
USB: gadget: Fix the memory leak in raw_gadget driver
Currently, increasing raw_dev->count happens before invoke the
raw_queue_event(), if the raw_queue_event() return error, invoke
raw_release() will not trigger the dev_free() to be called.
[ 268.905865][ T5067] raw-gadget.0 gadget.0: failed to queue event
[ 268.912053][ T5067] udc dummy_udc.0: failed to start USB Raw Gadget: -12
[ 268.918885][ T5067] raw-gadget.0: probe of gadget.0 failed with error -12
[ 268.925956][ T5067] UDC core: USB Raw Gadget: couldn't find an available UDC or it's busy
[ 268.934657][ T5067] misc raw-gadget: fail, usb_gadget_register_driver returned -16
BUG: memory leak
[<ffffffff8154bf94>] kmalloc_trace+0x24/0x90 mm/slab_common.c:1076
[<ffffffff8347eb55>] kmalloc include/linux/slab.h:582 [inline]
[<ffffffff8347eb55>] kzalloc include/linux/slab.h:703 [inline]
[<ffffffff8347eb55>] dev_new drivers/usb/gadget/legacy/raw_gadget.c:191 [inline]
[<ffffffff8347eb55>] raw_open+0x45/0x110 drivers/usb/gadget/legacy/raw_gadget.c:385
[<ffffffff827d1d09>] misc_open+0x1a9/0x1f0 drivers/char/misc.c:165
[<ffffffff8154bf94>] kmalloc_trace+0x24/0x90 mm/slab_common.c:1076
[<ffffffff8347cd2f>] kmalloc include/linux/slab.h:582 [inline]
[<ffffffff8347cd2f>] raw_ioctl_init+0xdf/0x410 drivers/usb/gadget/legacy/raw_gadget.c:460
[<ffffffff8347dfe9>] raw_ioctl+0x5f9/0x1120 drivers/usb/gadget/legacy/raw_gadget.c:1250
[<ffffffff81685173>] vfs_ioctl fs/ioctl.c:51 [inline]
[<ffffffff8154bf94>] kmalloc_trace+0x24/0x90 mm/slab_common.c:1076
[<ffffffff833ecc6a>] kmalloc include/linux/slab.h:582 [inline]
[<ffffffff833ecc6a>] kzalloc include/linux/slab.h:703 [inline]
[<ffffffff833ecc6a>] dummy_alloc_request+0x5a/0xe0 drivers/usb/gadget/udc/dummy_hcd.c:665
[<ffffffff833e9132>] usb_ep_alloc_request+0x22/0xd0 drivers/usb/gadget/udc/core.c:196
[<ffffffff8347f13d>] gadget_bind+0x6d/0x370 drivers/usb/gadget/legacy/raw_gadget.c:292
This commit therefore invoke kref_get() under the condition that
raw_queue_event() return success. |
