| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
phy: qcom-qmp-combo: fix NULL-deref on runtime resume
Commit fc64623637da ("phy: qcom-qmp-combo,usb: add support for separate
PCS_USB region") started treating the PCS_USB registers as potentially
separate from the PCS registers but used the wrong base when no PCS_USB
offset has been provided.
Fix the PCS_USB base used at runtime resume to prevent dereferencing a
NULL pointer on platforms that do not provide a PCS_USB offset (e.g.
SC7180). |
| In the Linux kernel, the following vulnerability has been resolved:
udf: Fix a slab-out-of-bounds write bug in udf_find_entry()
Syzbot reported a slab-out-of-bounds Write bug:
loop0: detected capacity change from 0 to 2048
==================================================================
BUG: KASAN: slab-out-of-bounds in udf_find_entry+0x8a5/0x14f0
fs/udf/namei.c:253
Write of size 105 at addr ffff8880123ff896 by task syz-executor323/3610
CPU: 0 PID: 3610 Comm: syz-executor323 Not tainted
6.1.0-rc2-syzkaller-00105-gb229b6ca5abb #0
Hardware name: Google Compute Engine/Google Compute Engine, BIOS
Google 10/11/2022
Call Trace:
<TASK>
__dump_stack lib/dump_stack.c:88 [inline]
dump_stack_lvl+0x1b1/0x28e lib/dump_stack.c:106
print_address_description+0x74/0x340 mm/kasan/report.c:284
print_report+0x107/0x1f0 mm/kasan/report.c:395
kasan_report+0xcd/0x100 mm/kasan/report.c:495
kasan_check_range+0x2a7/0x2e0 mm/kasan/generic.c:189
memcpy+0x3c/0x60 mm/kasan/shadow.c:66
udf_find_entry+0x8a5/0x14f0 fs/udf/namei.c:253
udf_lookup+0xef/0x340 fs/udf/namei.c:309
lookup_open fs/namei.c:3391 [inline]
open_last_lookups fs/namei.c:3481 [inline]
path_openat+0x10e6/0x2df0 fs/namei.c:3710
do_filp_open+0x264/0x4f0 fs/namei.c:3740
do_sys_openat2+0x124/0x4e0 fs/open.c:1310
do_sys_open fs/open.c:1326 [inline]
__do_sys_creat fs/open.c:1402 [inline]
__se_sys_creat fs/open.c:1396 [inline]
__x64_sys_creat+0x11f/0x160 fs/open.c:1396
do_syscall_x64 arch/x86/entry/common.c:50 [inline]
do_syscall_64+0x3d/0xb0 arch/x86/entry/common.c:80
entry_SYSCALL_64_after_hwframe+0x63/0xcd
RIP: 0033:0x7ffab0d164d9
Code: ff ff c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 40 00 48 89 f8 48 89
f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01
f0 ff ff 73 01 c3 48 c7 c1 c0 ff ff ff f7 d8 64 89 01 48
RSP: 002b:00007ffe1a7e6bb8 EFLAGS: 00000246 ORIG_RAX: 0000000000000055
RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007ffab0d164d9
RDX: 00007ffab0d164d9 RSI: 0000000000000000 RDI: 0000000020000180
RBP: 00007ffab0cd5a10 R08: 0000000000000000 R09: 0000000000000000
R10: 00005555573552c0 R11: 0000000000000246 R12: 00007ffab0cd5aa0
R13: 0000000000000000 R14: 0000000000000000 R15: 0000000000000000
</TASK>
Allocated by task 3610:
kasan_save_stack mm/kasan/common.c:45 [inline]
kasan_set_track+0x3d/0x60 mm/kasan/common.c:52
____kasan_kmalloc mm/kasan/common.c:371 [inline]
__kasan_kmalloc+0x97/0xb0 mm/kasan/common.c:380
kmalloc include/linux/slab.h:576 [inline]
udf_find_entry+0x7b6/0x14f0 fs/udf/namei.c:243
udf_lookup+0xef/0x340 fs/udf/namei.c:309
lookup_open fs/namei.c:3391 [inline]
open_last_lookups fs/namei.c:3481 [inline]
path_openat+0x10e6/0x2df0 fs/namei.c:3710
do_filp_open+0x264/0x4f0 fs/namei.c:3740
do_sys_openat2+0x124/0x4e0 fs/open.c:1310
do_sys_open fs/open.c:1326 [inline]
__do_sys_creat fs/open.c:1402 [inline]
__se_sys_creat fs/open.c:1396 [inline]
__x64_sys_creat+0x11f/0x160 fs/open.c:1396
do_syscall_x64 arch/x86/entry/common.c:50 [inline]
do_syscall_64+0x3d/0xb0 arch/x86/entry/common.c:80
entry_SYSCALL_64_after_hwframe+0x63/0xcd
The buggy address belongs to the object at ffff8880123ff800
which belongs to the cache kmalloc-256 of size 256
The buggy address is located 150 bytes inside of
256-byte region [ffff8880123ff800, ffff8880123ff900)
The buggy address belongs to the physical page:
page:ffffea000048ff80 refcount:1 mapcount:0 mapping:0000000000000000
index:0x0 pfn:0x123fe
head:ffffea000048ff80 order:1 compound_mapcount:0 compound_pincount:0
flags: 0xfff00000010200(slab|head|node=0|zone=1|lastcpupid=0x7ff)
raw: 00fff00000010200 ffffea00004b8500 dead000000000003 ffff888012041b40
raw: 0000000000000000 0000000080100010 00000001ffffffff 0000000000000000
page dumped because: kasan: bad access detected
page_owner tracks the page as allocated
page last allocated via order 0, migratetype Unmovable, gfp_mask 0x0(),
pid 1, tgid 1 (swapper/0), ts 1841222404, free_ts 0
create_dummy_stack mm/page_owner.c:
---truncated--- |
| In the Linux kernel, the following vulnerability has been resolved:
scsi: scsi_transport_sas: Fix error handling in sas_phy_add()
If transport_add_device() fails in sas_phy_add(), the kernel will crash
trying to delete the device in transport_remove_device() called from
sas_remove_host().
Unable to handle kernel NULL pointer dereference at virtual address 0000000000000108
CPU: 61 PID: 42829 Comm: rmmod Kdump: loaded Tainted: G W 6.1.0-rc1+ #173
pstate: 60000005 (nZCv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--)
pc : device_del+0x54/0x3d0
lr : device_del+0x37c/0x3d0
Call trace:
device_del+0x54/0x3d0
attribute_container_class_device_del+0x28/0x38
transport_remove_classdev+0x6c/0x80
attribute_container_device_trigger+0x108/0x110
transport_remove_device+0x28/0x38
sas_phy_delete+0x30/0x60 [scsi_transport_sas]
do_sas_phy_delete+0x6c/0x80 [scsi_transport_sas]
device_for_each_child+0x68/0xb0
sas_remove_children+0x40/0x50 [scsi_transport_sas]
sas_remove_host+0x20/0x38 [scsi_transport_sas]
hisi_sas_remove+0x40/0x68 [hisi_sas_main]
hisi_sas_v2_remove+0x20/0x30 [hisi_sas_v2_hw]
platform_remove+0x2c/0x60
Fix this by checking and handling return value of transport_add_device()
in sas_phy_add(). |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: Fix memory leaks in __check_func_call
kmemleak reports this issue:
unreferenced object 0xffff88817139d000 (size 2048):
comm "test_progs", pid 33246, jiffies 4307381979 (age 45851.820s)
hex dump (first 32 bytes):
01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
backtrace:
[<0000000045f075f0>] kmalloc_trace+0x27/0xa0
[<0000000098b7c90a>] __check_func_call+0x316/0x1230
[<00000000b4c3c403>] check_helper_call+0x172e/0x4700
[<00000000aa3875b7>] do_check+0x21d8/0x45e0
[<000000001147357b>] do_check_common+0x767/0xaf0
[<00000000b5a595b4>] bpf_check+0x43e3/0x5bc0
[<0000000011e391b1>] bpf_prog_load+0xf26/0x1940
[<0000000007f765c0>] __sys_bpf+0xd2c/0x3650
[<00000000839815d6>] __x64_sys_bpf+0x75/0xc0
[<00000000946ee250>] do_syscall_64+0x3b/0x90
[<0000000000506b7f>] entry_SYSCALL_64_after_hwframe+0x63/0xcd
The root case here is: In function prepare_func_exit(), the callee is
not released in the abnormal scenario after "state->curframe--;". To
fix, move "state->curframe--;" to the very bottom of the function,
right when we free callee and reset frame[] pointer to NULL, as Andrii
suggested.
In addition, function __check_func_call() has a similar problem. In
the abnormal scenario before "state->curframe++;", the callee also
should be released by free_func_state(). |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: L2CAP: Fix memory leak in vhci_write
Syzkaller reports a memory leak as follows:
====================================
BUG: memory leak
unreferenced object 0xffff88810d81ac00 (size 240):
[...]
hex dump (first 32 bytes):
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
backtrace:
[<ffffffff838733d9>] __alloc_skb+0x1f9/0x270 net/core/skbuff.c:418
[<ffffffff833f742f>] alloc_skb include/linux/skbuff.h:1257 [inline]
[<ffffffff833f742f>] bt_skb_alloc include/net/bluetooth/bluetooth.h:469 [inline]
[<ffffffff833f742f>] vhci_get_user drivers/bluetooth/hci_vhci.c:391 [inline]
[<ffffffff833f742f>] vhci_write+0x5f/0x230 drivers/bluetooth/hci_vhci.c:511
[<ffffffff815e398d>] call_write_iter include/linux/fs.h:2192 [inline]
[<ffffffff815e398d>] new_sync_write fs/read_write.c:491 [inline]
[<ffffffff815e398d>] vfs_write+0x42d/0x540 fs/read_write.c:578
[<ffffffff815e3cdd>] ksys_write+0x9d/0x160 fs/read_write.c:631
[<ffffffff845e0645>] do_syscall_x64 arch/x86/entry/common.c:50 [inline]
[<ffffffff845e0645>] do_syscall_64+0x35/0xb0 arch/x86/entry/common.c:80
[<ffffffff84600087>] entry_SYSCALL_64_after_hwframe+0x63/0xcd
====================================
HCI core will uses hci_rx_work() to process frame, which is queued to
the hdev->rx_q tail in hci_recv_frame() by HCI driver.
Yet the problem is that, HCI core may not free the skb after handling
ACL data packets. To be more specific, when start fragment does not
contain the L2CAP length, HCI core just copies skb into conn->rx_skb and
finishes frame process in l2cap_recv_acldata(), without freeing the skb,
which triggers the above memory leak.
This patch solves it by releasing the relative skb, after processing
the above case in l2cap_recv_acldata(). |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amdkfd: Fix NULL pointer dereference in svm_migrate_to_ram()
./drivers/gpu/drm/amd/amdkfd/kfd_migrate.c:985:58-62: ERROR: p is NULL but dereferenced. |
| In the Linux kernel, the following vulnerability has been resolved:
dmaengine: ti: k3-udma-glue: fix memory leak when register device fail
If device_register() fails, it should call put_device() to give
up reference, the name allocated in dev_set_name() can be freed
in callback function kobject_cleanup(). |
| In the Linux kernel, the following vulnerability has been resolved:
usb: dwc3: Wait unconditionally after issuing EndXfer command
Currently all controller IP/revisions except DWC3_usb3 >= 310a
wait 1ms unconditionally for ENDXFER completion when IOC is not
set. This is because DWC_usb3 controller revisions >= 3.10a
supports GUCTL2[14: Rst_actbitlater] bit which allows polling
CMDACT bit to know whether ENDXFER command is completed.
Consider a case where an IN request was queued, and parallelly
soft_disconnect was called (due to ffs_epfile_release). This
eventually calls stop_active_transfer with IOC cleared, hence
send_gadget_ep_cmd() skips waiting for CMDACT cleared during
EndXfer. For DWC3 controllers with revisions >= 310a, we don't
forcefully wait for 1ms either, and we proceed by unmapping the
requests. If ENDXFER didn't complete by this time, it leads to
SMMU faults since the controller would still be accessing those
requests.
Fix this by ensuring ENDXFER completion by adding 1ms delay in
__dwc3_stop_active_transfer() unconditionally. |
| The strcmp implementation optimized for the Power10 processor in the GNU C Library version 2.39 and later writes to vector registers v20 to v31 without saving contents from the caller (those registers are defined as non-volatile registers by the powerpc64le ABI), resulting in overwriting of its contents and potentially altering control flow of the caller, or leaking the input strings to the function to other parts of the program. |
| In the Linux kernel, the following vulnerability has been resolved:
net/sched: taprio: always validate TCA_TAPRIO_ATTR_PRIOMAP
If one TCA_TAPRIO_ATTR_PRIOMAP attribute has been provided,
taprio_parse_mqprio_opt() must validate it, or userspace
can inject arbitrary data to the kernel, the second time
taprio_change() is called.
First call (with valid attributes) sets dev->num_tc
to a non zero value.
Second call (with arbitrary mqprio attributes)
returns early from taprio_parse_mqprio_opt()
and bad things can happen. |
| In the Linux kernel, the following vulnerability has been resolved:
RDMA/core: Fix null-ptr-deref in ib_core_cleanup()
KASAN reported a null-ptr-deref error:
KASAN: null-ptr-deref in range [0x0000000000000118-0x000000000000011f]
CPU: 1 PID: 379
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996)
RIP: 0010:destroy_workqueue+0x2f/0x740
RSP: 0018:ffff888016137df8 EFLAGS: 00000202
...
Call Trace:
ib_core_cleanup+0xa/0xa1 [ib_core]
__do_sys_delete_module.constprop.0+0x34f/0x5b0
do_syscall_64+0x3a/0x90
entry_SYSCALL_64_after_hwframe+0x63/0xcd
RIP: 0033:0x7fa1a0d221b7
...
It is because the fail of roce_gid_mgmt_init() is ignored:
ib_core_init()
roce_gid_mgmt_init()
gid_cache_wq = alloc_ordered_workqueue # fail
...
ib_core_cleanup()
roce_gid_mgmt_cleanup()
destroy_workqueue(gid_cache_wq)
# destroy an unallocated wq
Fix this by catching the fail of roce_gid_mgmt_init() in ib_core_init(). |
| In the Linux kernel, the following vulnerability has been resolved:
block: Fix possible memory leak for rq_wb on add_disk failure
kmemleak reported memory leaks in device_add_disk():
kmemleak: 3 new suspected memory leaks
unreferenced object 0xffff88800f420800 (size 512):
comm "modprobe", pid 4275, jiffies 4295639067 (age 223.512s)
hex dump (first 32 bytes):
04 00 00 00 08 00 00 00 01 00 00 00 00 00 00 00 ................
00 e1 f5 05 00 00 00 00 00 00 00 00 00 00 00 00 ................
backtrace:
[<00000000d3662699>] kmalloc_trace+0x26/0x60
[<00000000edc7aadc>] wbt_init+0x50/0x6f0
[<0000000069601d16>] wbt_enable_default+0x157/0x1c0
[<0000000028fc393f>] blk_register_queue+0x2a4/0x420
[<000000007345a042>] device_add_disk+0x6fd/0xe40
[<0000000060e6aab0>] nbd_dev_add+0x828/0xbf0 [nbd]
...
It is because the memory allocated in wbt_enable_default() is not
released in device_add_disk() error path.
Normally, these memory are freed in:
del_gendisk()
rq_qos_exit()
rqos->ops->exit(rqos);
wbt_exit()
So rq_qos_exit() is called to free the rq_wb memory for wbt_init().
However in the error path of device_add_disk(), only
blk_unregister_queue() is called and make rq_wb memory leaked.
Add rq_qos_exit() to the error path to fix it. |
| In the Linux kernel, the following vulnerability has been resolved:
thermal/debugfs: Free all thermal zone debug memory on zone removal
Because thermal_debug_tz_remove() does not free all memory allocated for
thermal zone diagnostics, some of that memory becomes unreachable after
freeing the thermal zone's struct thermal_debugfs object.
Address this by making thermal_debug_tz_remove() free all of the memory
in question.
Cc :6.8+ <stable@vger.kernel.org> # 6.8+ |
| In the Linux kernel, the following vulnerability has been resolved:
scsi: mpi3mr: Avoid memcpy field-spanning write WARNING
When the "storcli2 show" command is executed for eHBA-9600, mpi3mr driver
prints this WARNING message:
memcpy: detected field-spanning write (size 128) of single field "bsg_reply_buf->reply_buf" at drivers/scsi/mpi3mr/mpi3mr_app.c:1658 (size 1)
WARNING: CPU: 0 PID: 12760 at drivers/scsi/mpi3mr/mpi3mr_app.c:1658 mpi3mr_bsg_request+0x6b12/0x7f10 [mpi3mr]
The cause of the WARN is 128 bytes memcpy to the 1 byte size array "__u8
replay_buf[1]" in the struct mpi3mr_bsg_in_reply_buf. The array is intended
to be a flexible length array, so the WARN is a false positive.
To suppress the WARN, remove the constant number '1' from the array
declaration and clarify that it has flexible length. Also, adjust the
memory allocation size to match the change. |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: qca: add missing firmware sanity checks
Add the missing sanity checks when parsing the firmware files before
downloading them to avoid accessing and corrupting memory beyond the
vmalloced buffer. |
| go-git is a highly extensible git implementation library written in pure Go. A denial of service (DoS) vulnerability was discovered in go-git versions prior to v5.13. This vulnerability allows an attacker to perform denial of service attacks by providing specially crafted responses from a Git server which triggers resource exhaustion in go-git clients. Users running versions of go-git from v4 and above are recommended to upgrade to v5.13 in order to mitigate this vulnerability. |
| FCGI versions 0.44 through 0.82, for Perl, include a vulnerable version of the FastCGI fcgi2 (aka fcgi) library.
The included FastCGI library is affected by CVE-2025-23016, causing an integer overflow (and resultant heap-based buffer overflow) via crafted nameLen or valueLen values in data to the IPC socket. This occurs in ReadParams in fcgiapp.c. |
| In the Linux kernel, the following vulnerability has been resolved:
igb: Fix string truncation warnings in igb_set_fw_version
Commit 1978d3ead82c ("intel: fix string truncation warnings")
fixes '-Wformat-truncation=' warnings in igb_main.c by using kasprintf.
drivers/net/ethernet/intel/igb/igb_main.c:3092:53: warning：‘%d’ directive output may be truncated writing between 1 and 5 bytes into a region of size between 1 and 13 [-Wformat-truncation=]
3092 | "%d.%d, 0x%08x, %d.%d.%d",
| ^~
drivers/net/ethernet/intel/igb/igb_main.c:3092:34: note：directive argument in the range [0, 65535]
3092 | "%d.%d, 0x%08x, %d.%d.%d",
| ^~~~~~~~~~~~~~~~~~~~~~~~~
drivers/net/ethernet/intel/igb/igb_main.c:3092:34: note：directive argument in the range [0, 65535]
drivers/net/ethernet/intel/igb/igb_main.c:3090:25: note：‘snprintf’ output between 23 and 43 bytes into a destination of size 32
kasprintf() returns a pointer to dynamically allocated memory
which can be NULL upon failure.
Fix this warning by using a larger space for adapter->fw_version,
and then fall back and continue to use snprintf. |
| The Object Request Broker (ORB) in IBM SDK, Java Technology Edition 7.1.0.0 through 7.1.5.18 and 8.0.0.0 through 8.0.8.26 is vulnerable to remote denial of service, caused by a race condition in the management of ORB listener threads. |
| In the Linux kernel, the following vulnerability has been resolved:
powerpc/smp: do not decrement idle task preempt count in CPU offline
With PREEMPT_COUNT=y, when a CPU is offlined and then onlined again, we
get:
BUG: scheduling while atomic: swapper/1/0/0x00000000
no locks held by swapper/1/0.
CPU: 1 PID: 0 Comm: swapper/1 Not tainted 5.15.0-rc2+ #100
Call Trace:
dump_stack_lvl+0xac/0x108
__schedule_bug+0xac/0xe0
__schedule+0xcf8/0x10d0
schedule_idle+0x3c/0x70
do_idle+0x2d8/0x4a0
cpu_startup_entry+0x38/0x40
start_secondary+0x2ec/0x3a0
start_secondary_prolog+0x10/0x14
This is because powerpc's arch_cpu_idle_dead() decrements the idle task's
preempt count, for reasons explained in commit a7c2bb8279d2 ("powerpc:
Re-enable preemption before cpu_die()"), specifically "start_secondary()
expects a preempt_count() of 0."
However, since commit 2c669ef6979c ("powerpc/preempt: Don't touch the idle
task's preempt_count during hotplug") and commit f1a0a376ca0c ("sched/core:
Initialize the idle task with preemption disabled"), that justification no
longer holds.
The idle task isn't supposed to re-enable preemption, so remove the
vestigial preempt_enable() from the CPU offline path.
Tested with pseries and powernv in qemu, and pseries on PowerVM. |
