| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
USB: dummy-hcd: Fix locking/synchronization error
Syzbot testing was able to provoke an addressing exception and crash
in the usb_gadget_udc_reset() routine in
drivers/usb/gadgets/udc/core.c, resulting from the fact that the
routine was called with a second ("driver") argument of NULL. The bad
caller was set_link_state() in dummy_hcd.c, and the problem arose
because of a race between a USB reset and driver unbind.
These sorts of races were not supposed to be possible; commit
7dbd8f4cabd9 ("USB: dummy-hcd: Fix erroneous synchronization change"),
along with a few followup commits, was written specifically to prevent
them. As it turns out, there are (at least) two errors remaining in
the code. Another patch will address the second error; this one is
concerned with the first.
The error responsible for the syzbot crash occurred because the
stop_activity() routine will sometimes drop and then re-acquire the
dum->lock spinlock. A call to stop_activity() occurs in
set_link_state() when handling an emulated USB reset, after the test
of dum->ints_enabled and before the increment of dum->callback_usage.
This allowed another thread (doing a driver unbind) to sneak in and
grab the spinlock, and then clear dum->ints_enabled and dum->driver.
Normally this other thread would have to wait for dum->callback_usage
to go down to 0 before it would clear dum->driver, but in this case it
didn't have to wait since dum->callback_usage had not yet been
incremented.
The fix is to increment dum->callback_usage _before_ calling
stop_activity() instead of after. Then the thread doing the unbind
will not clear dum->driver until after the call to
usb_gadget_udc_reset() safely returns and dum->callback_usage has been
decremented again. |
| In the Linux kernel, the following vulnerability has been resolved:
netfilter: flowtable: strictly check for maximum number of actions
The maximum number of flowtable hardware offload actions in IPv6 is:
* ethernet mangling (4 payload actions, 2 for each ethernet address)
* SNAT (4 payload actions)
* DNAT (4 payload actions)
* Double VLAN (4 vlan actions, 2 for popping vlan, and 2 for pushing)
for QinQ.
* Redirect (1 action)
Which makes 17, while the maximum is 16. But act_ct supports for tunnels
actions too. Note that payload action operates at 32-bit word level, so
mangling an IPv6 address takes 4 payload actions.
Update flow_action_entry_next() calls to check for the maximum number of
supported actions.
While at it, rise the maximum number of actions per flow from 16 to 24
so this works fine with IPv6 setups. |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: SMP: force responder MITM requirements before building the pairing response
smp_cmd_pairing_req() currently builds the pairing response from the
initiator auth_req before enforcing the local BT_SECURITY_HIGH
requirement. If the initiator omits SMP_AUTH_MITM, the response can
also omit it even though the local side still requires MITM.
tk_request() then sees an auth value without SMP_AUTH_MITM and may
select JUST_CFM, making method selection inconsistent with the pairing
policy the responder already enforces.
When the local side requires HIGH security, first verify that MITM can
be achieved from the IO capabilities and then force SMP_AUTH_MITM in the
response in both rsp.auth_req and auth. This keeps the responder auth bits
and later method selection aligned. |
| In the Linux kernel, the following vulnerability has been resolved:
usb: gadget: f_rndis: Protect RNDIS options with mutex
The class/subclass/protocol options are suspectible to race conditions
as they can be accessed concurrently through configfs.
Use existing mutex to protect these options. This issue was identified
during code inspection. |
| In the Linux kernel, the following vulnerability has been resolved:
i3c: mipi-i3c-hci: Fix race in DMA ring dequeue
The HCI DMA dequeue path (hci_dma_dequeue_xfer()) may be invoked for
multiple transfers that timeout around the same time. However, the
function is not serialized and can race with itself.
When a timeout occurs, hci_dma_dequeue_xfer() stops the ring, processes
incomplete transfers, and then restarts the ring. If another timeout
triggers a parallel call into the same function, the two instances may
interfere with each other - stopping or restarting the ring at unexpected
times.
Add a mutex so that hci_dma_dequeue_xfer() is serialized with respect to
itself. |
| In the Linux kernel, the following vulnerability has been resolved:
btrfs: add missing RCU unlock in error path in try_release_subpage_extent_buffer()
Call rcu_read_lock() before exiting the loop in
try_release_subpage_extent_buffer() because there is a rcu_read_unlock()
call past the loop.
This has been detected by the Clang thread-safety analyzer. |
| In the Linux kernel, the following vulnerability has been resolved:
net: ncsi: fix skb leak in error paths
Early return paths in NCSI RX and AEN handlers fail to release
the received skb, resulting in a memory leak.
Specifically, ncsi_aen_handler() returns on invalid AEN packets
without consuming the skb. Similarly, ncsi_rcv_rsp() exits early
when failing to resolve the NCSI device, response handler, or
request, leaving the skb unfreed. |
| In the Linux kernel, the following vulnerability has been resolved:
io_uring/kbuf: check if target buffer list is still legacy on recycle
There's a gap between when the buffer was grabbed and when it
potentially gets recycled, where if the list is empty, someone could've
upgraded it to a ring provided type. This can happen if the request
is forced via io-wq. The legacy recycling is missing checking if the
buffer_list still exists, and if it's of the correct type. Add those
checks. |
| vm2 is an open source vm/sandbox for Node.js. Prior to version 3.10.5, the fix for CVE-2023-37466 is insufficient and can be circumvented allowing attackers to write code which can escape from the VM2 sandbox and execute arbitrary commands on the host system. This issue has been patched in version 3.10.5. |
| vm2 is an open source vm/sandbox for Node.js. Prior to version 3.11.0, VM2 suffers from a sandbox breakout vulnerability through the inspect function. This allows attackers to write code which can escape from the VM2 sandbox and execute arbitrary commands on the host system. This issue has been patched in version 3.11.0. |
| Flarum is open-source forum software. Prior to versions 1.8.16 and 2.0.0-rc.1, Flarum's patch for CVE-2023-27577 restricted the @import and data-uri() LESS features in the custom_less setting, but the same restriction was never applied to other settings registered as LESS config variables (for example theme_primary_color and theme_secondary_color, as well as any key registered via Extend\Settings::registerLessConfigVar()). Those values are interpolated verbatim into the LESS source at compile time, allowing an authenticated administrator to craft a theme-color value that injects an arbitrary @import directive into the compiled forum.css. Because the underlying LESS parser honours @import (inline) '<path>', an attacker can read arbitrary files reachable by the PHP process (local file inclusion) or trigger outbound HTTP(S) requests (server-side request forgery). This issue has been patched in versions 1.8.16 and 2.0.0-rc.1. |
| Kestra v1.3.3 and before is vulnerable to SQL Injection. The vulnerability occurs because user-controlled input from a GET parameter is directly concatenated into an SQL query without proper sanitization or parameterization. As a result, attackers can inject arbitrary SQL expressions into the database query. |
| SQLBot is an intelligent Text-to-SQL system based on large language models and RAG. In versions 1.7.0 and earlier, the Text2SQL chat interface is vulnerable to prompt injection. The user-provided question parameter is directly concatenated into the LLM prompt without filtering or escaping, and the SQL extracted from the LLM response is executed against the database without validation or sanitization. An authenticated attacker can craft a malicious question to manipulate the LLM into generating and executing arbitrary SQL statements. When connected to a PostgreSQL data source, this can lead to remote code execution via COPY FROM PROGRAM. This issue has been fixed in version 1.7.1. |
| Vaultwarden is a Bitwarden-compatible server written in Rust. In version 1.35.4 and earlier, the get_org_collections_details endpoint (GET /api/organizations/{org_id}/collections/details) is missing the has_full_access() authorization check that exists on the sibling get_org_collections endpoint. This allows any Manager-role user with accessAll=False and no collection assignments to retrieve the names, UUIDs, user-to-collection mappings, and group-to-collection mappings for all collections in the organization. This issue has been fixed in version 1.35.5. |
| LiteLLM is a proxy server (AI Gateway) to call LLM APIs in OpenAI (or native) format. From version 1.81.16 to before version 1.83.7, a database query used during proxy API key checks mixed the caller-supplied key value into the query text instead of passing it as a separate parameter. An unauthenticated attacker could send a specially crafted Authorization header to any LLM API route (for example POST /chat/completions) and reach this query through the proxy's error-handling path. An attacker could read data from the proxy's database and may be able to modify it, leading to unauthorised access to the proxy and the credentials it manages. This issue has been patched in version 1.83.7. |
| electerm is an open-sourced terminal/ssh/sftp/telnet/serialport/RDP/VNC/Spice/ftp client. Prior to version 3.3.8, a command injection vulnerability exists in github.com/elcterm/electerm/npm/install.js:130. The runLinux() function appends attacker-controlled remote version strings directly into an exec("rm -rf ...") command without validation. This issue has been patched in version 3.3.8. |
| electerm is an open-sourced terminal/ssh/sftp/telnet/serialport/RDP/VNC/Spice/ftp client. Prior to version 3.7.16, the runWidget function in src/app/widgets/load-widget.js constructs a file path by directly concatenating user‑supplied widget identifiers without any sanitisation. Because runWidget is exposed to the renderer process via an asynchronous IPC handler with no input validation, an attacker who achieves JavaScript execution inside the renderer (for example, through a malicious plugin or a cross‑site scripting flaw in the built‑in webview) can abuse a path traversal (../) to load and execute an arbitrary JavaScript file anywhere on the victim’s filesystem. This gives the attacker local code execution with the full privileges of the electerm process, leading to complete system compromise. This issue has been patched in version 3.7.16. |
| Sandboxie-Plus is an open source sandbox-based isolation software for Windows. In versions 1.17.2 and earlier, SbieIniServer::HashPassword converts a SHA-1 digest to hexadecimal incorrectly. The high nibble of each byte is shifted right by 8 instead of 4, which always produces zero for an 8-bit value. As a result, the stored EditPassword hash only preserves the low nibble of each digest byte, reducing the effective entropy from 160 bits to 80 bits. This is layered on top of an unsalted SHA-1 scheme. The reduced entropy makes leaked or backed-up password hashes materially easier to brute-force.
This issue has been fixed in version 1.17.3. |
| electerm is an open-sourced terminal/ssh/sftp/telnet/serialport/RDP/VNC/Spice/ftp client. Prior to version 3.7.9, a code execution (RCE) vulnerability exists in electerm's SFTP open with system editor or "Edit with custom editor" feature. When a user opts to edit a file using open with system editor or open with a custom editor, the filename is passed directly into a command line without sanitization. A malicious actor controlling the SSH server or user OS can exploit this by crafting a filename containing shell metacharacters. If a victim subsequently attempts to edit this file, the injected commands are executed on their machine with the user's privileges. This could allow the attacker to run arbitrary code, install malware, or move laterally within the network. This issue has been patched in version 3.7.9. |
| Bio.Entrez in Biopython through 186 allows doctype XXE. |
