| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| Open Neural Network Exchange (ONNX) is an open standard for machine learning interoperability. Prior to version 1.21.0, there is an issue in onnx.load, the code checks for symlinks to prevent path traversal, but completely misses hardlinks because a hardlink looks exactly like a regular file on the filesystem. This issue has been patched in version 1.21.0. |
| Wasmtime is a runtime for WebAssembly. In 43.0.0, cloning a wasmtime::Linker is unsound and can result in use-after-free bugs. This bug is not controllable by guest Wasm programs. It can only be triggered by a specific sequence of embedder API calls made by the host. Specifically, the following steps must occur to trigger the bug clone a wasmtime::Linker, drop the original linker instance, use the new, cloned linker instance, resulting in a use-after-free. This vulnerability is fixed in 43.0.1. |
| Heap-based Buffer Overflow, Memory Corruption, Out-Of-Bounds Read, Out-Of-Bounds Write, Stack-based Buffer Overflow, Type Confusion, Uninitialized Variable, Use-After-Free vulnerabilities exist in the file reading procedure in SOLIDWORKS Desktop on Release SOLIDWORKS 2024.
These vulnerabilities could allow an attacker to execute arbitrary code while opening a specially crafted CATPART, DWG, DXF, IPT, JT, SAT, SLDDRW, SLDPRT, STL, STP, X_B or X_T file. |
| When DNSdist is configured to provide DoH via the nghttp2 provider, an attacker can cause a denial of service by crafting a DoH exchange that triggers an illegal memory access (double-free) and crash of DNSdist, causing a denial of service.
The remedy is: upgrade to the patched 1.9.9 version.
A workaround is to temporarily switch to the h2o provider until DNSdist has been upgraded to a fixed version.
We would like to thank Charles Howes for bringing this issue to our attention. |
| A security vulnerability has been detected in jarun nnn up to 5.1. The impacted element is the function show_content_in_floating_window/run_cmd_as_plugin of the file nnn/src/nnn.c. The manipulation leads to double free. An attack has to be approached locally. The identifier of the patch is 2f07ccdf21e705377862e5f9dfa31e1694979ac7. It is suggested to install a patch to address this issue. |
| The primary channel is unprotected on Movistar 4G router affecting E version S_WLD71-T1_v2.0.201820. This device has the 'adb' service open on port 5555 and provides access to a shell with root privileges. |
| It is possible to cause an use-after-free write in SANM decoding with a carefully crafted animation using subversion <2.
When a STOR chunk is present, a subsequent FOBJ chunk will be saved in ctx->stored_frame. Stored frames can later be referenced by FTCH chunks. For files using subversion < 2, the undecoded frame is stored, and decoded again when the FTCH chunks are parsed. However, in process_frame_obj if the frame has an invalid size, there’s an early return, with a value of 0.
This causes the code in decode_frame to still store the raw frame buffer into ctx->stored_frame. Leaving ctx->has_dimensions set to false.
A subsequent chunk with type FTCH would call process_ftch and decode that frame obj again, adding to the top/left values and calling process_frame_obj again.
Given that we never set ctx->have_dimensions before, this time we set the dimensions, calling init_buffers, which can reallocate the buffer in ctx->stored_frame, freeing the previous one. However, the GetByteContext object gb still holds a reference to the old buffer.
Finally, when the code tries to decode the frame, codecs that accept a GetByteContext as a parameter will trigger a use-after-free read when using gb.
GetByteContext is only used for reading bytes, so at most one could read invalid data. There are no heap allocations between the free and when the object is accessed. However, upon returning to process_ftch, the code restores the original values for top/left in stored_frame, writing 4 bytes to the freed data at offset 6, potentially corrupting the allocator’s metadata.
This issue can be triggered just by probing whether a file has the sanm format.
We recommend upgrading to version 8.0 or beyond. |
| A use-after-free vulnerability was found in the ProcRenderAddGlyphs() function of Xorg servers. This issue occurs when AllocateGlyph() is called to store new glyphs sent by the client to the X server, potentially resulting in multiple entries pointing to the same non-refcounted glyphs. Consequently, ProcRenderAddGlyphs() may free a glyph, leading to a use-after-free scenario when the same glyph pointer is subsequently accessed. This flaw allows an authenticated attacker to execute arbitrary code on the system by sending a specially crafted request. |
| A vulnerability was found in PX4 PX4-Autopilot up to 1.15.4. This issue affects the function MavlinkReceiver::handle_message_serial_control of the file src/modules/mavlink/mavlink_receiver.cpp of the component Mavlink Shell Closing Handler. The manipulation of the argument _mavlink_shell leads to use after free. An attack has to be approached locally. The complexity of an attack is rather high. The exploitation is known to be difficult. The identifier of the patch is 4395d4f00c49b888f030f5b43e2a779f1fa78708. It is recommended to apply a patch to fix this issue. |
| Software installed and run as a non-privileged user may conduct improper GPU system calls to achieve unauthorised reads and writes of physical memory from the GPU HW. |
| Software installed and run as a non-privileged user may conduct improper GPU system calls to trigger use-after-free kernel exceptions. |
| jq is a command-line JSON processor. In version 1.8.0 a heap use after free vulnerability exists within the function f_strflocaltime of /src/builtin.c. This issue has been patched in commit 499c91b, no known fix version exists at time of publication. |
| A Use After Free vulnerability on UniFi Protect Cameras could allow a Remote Code Execution (RCE) by a malicious actor with access to UniFi Protect Cameras management network. |
| NVIDIA Display Driver for Windows contains a vulnerability where an attacker could trigger a use after free. A successful exploit of this vulnerability might lead to code execution, escalation of privileges, data tampering, denial of service, and information disclosure. |
| rust-openssl is a set of OpenSSL bindings for the Rust programming language. In affected versions `ssl::select_next_proto` can return a slice pointing into the `server` argument's buffer but with a lifetime bound to the `client` argument. In situations where the `sever` buffer's lifetime is shorter than the `client` buffer's, this can cause a use after free. This could cause the server to crash or to return arbitrary memory contents to the client. The crate`openssl` version 0.10.70 fixes the signature of `ssl::select_next_proto` to properly constrain the output buffer's lifetime to that of both input buffers. Users are advised to upgrade. In standard usage of `ssl::select_next_proto` in the callback passed to `SslContextBuilder::set_alpn_select_callback`, code is only affected if the `server` buffer is constructed *within* the callback. |
| In the Linux kernel, the following vulnerability has been resolved:
scsi: mvsas: Fix use-after-free bugs in mvs_work_queue
During the detaching of Marvell's SAS/SATA controller, the original code
calls cancel_delayed_work() in mvs_free() to cancel the delayed work
item mwq->work_q. However, if mwq->work_q is already running, the
cancel_delayed_work() may fail to cancel it. This can lead to
use-after-free scenarios where mvs_free() frees the mvs_info while
mvs_work_queue() is still executing and attempts to access the
already-freed mvs_info.
A typical race condition is illustrated below:
CPU 0 (remove) | CPU 1 (delayed work callback)
mvs_pci_remove() |
mvs_free() | mvs_work_queue()
cancel_delayed_work() |
kfree(mvi) |
| mvi-> // UAF
Replace cancel_delayed_work() with cancel_delayed_work_sync() to ensure
that the delayed work item is properly canceled and any executing
delayed work item completes before the mvs_info is deallocated.
This bug was found by static analysis. |
| NVIDIA GPU Display Driver for Windows contains a vulnerability where an attacker with local unprivileged access that can win a race condition might be able to trigger a use-after-free error. A successful exploit of this vulnerability might lead to code execution, escalation of privileges, data tampering, denial of service, or information disclosure. |
| Use After Free vulnerability exists in the CATPRODUCT file reading procedure in SOLIDWORKS eDrawings on Release SOLIDWORKS Desktop 2025. This vulnerability could allow an attacker to execute arbitrary code while opening a specially crafted CATPRODUCT file. |
| In X.Org X server 20.11 through 21.1.16, when a client application uses easystroke for mouse gestures, the main thread modifies various data structures used by the input thread without acquiring a lock, aka a race condition. In particular, AttachDevice in dix/devices.c does not acquire an input lock. |
| @fastly/js-compute is a JavaScript SDK and runtime for building Fastly Compute applications. The implementation of several functions were determined to include a use-after-free bug. This bug could allow for unintended data loss if the result of the preceding functions were sent anywhere else, and often results in a guest trap causing services to return a 500. This bug has been fixed in version 3.16.0 of the `@fastly/js-compute` package. |
