Export limit exceeded: 48524 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Export limit exceeded: 10074 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (2591 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-68466 | 1 Linux | 1 Linux Kernel | 2026-08-17 | 8.8 High |
| In the Linux kernel, the following vulnerability has been resolved: mtd: rawnand: lpc32xx_slc: fail DMA transfer on completion timeout lpc32xx_xmit_dma() waits for the DMA completion callback but ignores wait_for_completion_timeout(). A timed out DMA transfer is therefore unmapped and reported as successful to the NAND read/write path. Return -ETIMEDOUT when the completion wait expires. Terminate the DMA channel before unmapping the scatterlist so the timed out transfer cannot continue to access the buffer after the error is returned. | ||||
| CVE-2026-74501 | 1 Linux | 1 Linux Kernel | 2026-08-17 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: ALSA: usb-audio: fix use-after-free in ump_to_endpoint() create_midi2_ump() registers a card-owned snd_ump_endpoint and stores a back-pointer to its per-interface snd_usb_midi2_ump object in ump->private_data, but it never installs an ump->private_free hook and never clears that pointer. If a later step of snd_usb_midi_v2_create() fails, its error path calls free_all_midi2_umps(), which kfree()s the snd_usb_midi2_ump object while the already-registered endpoint keeps pointing at it. The created /dev/snd/umpC*D* node stays exposed, so the first operation of any UMP open, ump_to_endpoint(), dereferences the dangling ump->private_data and reads rmidi->eps[dir] out of freed memory. A malicious USB MIDI 2.0 device that makes creation fail after the endpoint is registered can thus trigger a slab use-after-free read on a subsequent open of the UMP node. Clear the endpoint's back-pointer before freeing the object, and let ump_to_endpoint() tolerate a NULL private_data so the open/close/trigger callbacks fail cleanly (their callers already handle a NULL endpoint) instead of dereferencing a stale pointer. Discovered by XBOW, triaged by Baul Lee <baul.lee@xbow.com> | ||||
| CVE-2026-74422 | 1 Linux | 1 Linux Kernel | 2026-08-17 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: drm/rockchip: inno-hdmi: Switch to drmm_kzalloc() Driver makes use of drmm_encoder_init() to initialize the encoder and automatically handle the cleanup by registering drm_encoder_cleanup() with drmm_add_action(). However, the internal structure containing the encoder part gets allocated with devm_kzalloc(), which happens while component_bind_all() is being called from Rockchip DRM driver. The component framework further ensures it is deallocated as part of releasing all the resources claimed during bind, which is triggered from component_unbind_all(). When the reference to the DRM device gets eventually dropped via drm_dev_put() in rockchip_drm_unbind(), drmm_encoder_alloc_release() attempts to access the now released encoder structure, leading to use-after-free. Ensure driver's internal structure is still reachable on encoder cleanup by switching from a device-managed allocation to a drm-managed one. | ||||
| CVE-2026-74421 | 1 Linux | 1 Linux Kernel | 2026-08-17 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: drm/rockchip: dw_dp: Switch to drmm_kzalloc() Driver makes use of drmm_encoder_init() to initialize the encoder and automatically handle the cleanup by registering drm_encoder_cleanup() with drmm_add_action(). However, the internal structure containing the encoder part gets allocated with devm_kzalloc(), which happens while component_bind_all() is being called from Rockchip DRM driver. The component framework further ensures it is deallocated as part of releasing all the resources claimed during bind, which is triggered from component_unbind_all(). When the reference to the DRM device gets eventually dropped via drm_dev_put() in rockchip_drm_unbind(), drmm_encoder_alloc_release() attempts to access the now released encoder structure, leading to use-after-free. Ensure driver's internal structure is still reachable on encoder cleanup by switching from a device-managed allocation to a drm-managed one. | ||||
| CVE-2026-74415 | 1 Linux | 1 Linux Kernel | 2026-08-17 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: spi: atcspi200: fix use-after-free when driver unbind DMA resource is initialized after SPI controller registration. So when driver unbind, this can trigger a use-after-free when DMA is torn down while the controller is still alive and triggers DMA transfers. | ||||
| CVE-2026-74348 | 1 Linux | 1 Linux Kernel | 2026-08-17 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: ocfs2/dlm: require a ref for locking_state debugfs open debug_lockres_open() copies inode->i_private into struct debug_lockres and debug_lockres_release() later drops that pointer with dlm_put(). That only works if open successfully pins the struct dlm_ctxt. Today open calls dlm_grab(dlm) but ignores its return value. Once the last domain unregister has removed the context from dlm_domains, dlm_grab() returns NULL, yet open still stores the raw pointer and returns success. The later release path is outside the debugfs removal barrier, so it can call dlm_put() after dlm_free_ctxt_mem() has freed the context. KASAN reports this as a slab-use-after-free in dlm_put() called from debug_lockres_release(). Fail the open when dlm_grab() cannot acquire the reference and unwind the seq_file private state before returning. That keeps locking_state from handing out a file descriptor whose release path does not own the dlm_ctxt. The buggy scenario involves two paths, with each column showing the order within that path: locking_state debugfs open: last domain unregister: 1. debug_lockres_open() reads 1. dlm_unregister_domain() calls inode->i_private. dlm_complete_dlm_shutdown(). 2. debug_lockres_open() calls 2. shutdown removes the dlm_ctxt from dlm_grab(dlm) and gets NULL. dlm_domains. 3. open still stores the raw dlm 3. final teardown reaches pointer in dl->dl_ctxt and dlm_free_ctxt_mem() and frees it. returns success. 4. debug_lockres_release() later calls dlm_put(dl->dl_ctxt). Validation reproduced this kernel report: KASAN slab-use-after-free in dlm_put+0x82/0x200 RIP: 0033:0x7f4d349bc9e0 The buggy address belongs to the object at ffff888103a3c000 which belongs to the cache kmalloc-2k of size 2048 The buggy address is located 816 bytes inside of freed 2048-byte region [ffff888103a3c000, ffff888103a3c800) Write of size 4 Call trace: dump_stack_lvl+0x66/0xa0 (?:?) print_report+0xd0/0x630 (?:?) dlm_put+0x82/0x200 (?:?) srso_alias_return_thunk+0x5/0xfbef5 (?:?) __virt_addr_valid+0x188/0x2f0 (?:?) kasan_report+0xe4/0x120 (?:?) kasan_check_range+0x105/0x1b0 (?:?) debug_lockres_release+0x53/0x80 (fs/ocfs2/dlm/dlmdebug.c:587) dlm_put+0x9/0x200 (?:?) debug_lockres_release+0x5c/0x80 (fs/ocfs2/dlm/dlmdebug.c:587) full_proxy_release+0x67/0x90 (?:?) __fput+0x1df/0x4b0 (?:?) do_raw_spin_lock+0x10f/0x1b0 (?:?) fput_close_sync+0xd2/0x170 (?:?) __x64_sys_close+0x55/0x90 (?:?) do_syscall_64+0x10c/0x640 (arch/x86/entry/syscall_64.c:87) irqentry_exit+0xac/0x6e0 (?:?) entry_SYSCALL_64_after_hwframe+0x77/0x7f (?:?) Freed by task stack: kasan_save_stack+0x33/0x60 (?:?) kasan_save_track+0x14/0x30 (?:?) kasan_save_free_info+0x3b/0x60 (?:?) __kasan_slab_free+0x5f/0x80 (?:?) kfree+0x30f/0x580 (?:?) dlm_put+0x1ce/0x200 (?:?) dlm_unregister_domain+0xf6/0xb30 (?:?) o2cb_cluster_disconnect+0x6b/0x90 (?:?) ocfs2_cluster_disconnect+0x41/0x70 (?:?) ocfs2_dlm_shutdown+0x1c4/0x220 (?:?) ocfs2_dismount_volume+0x38a/0x550 (?:?) generic_shutdown_super+0xc3/0x220 (?:?) kill_block_super+0x29/0x60 (?:?) deactivate_locked_super+0x66/0xe0 (?:?) cleanup_mnt+0x13d/0x210 (?:?) task_work_run+0xfa/0x170 (?:?) exit_to_user_mode_loop+0xd6/0x430 (?:?) do_syscall_64+0x3cb/0x640 (arch/x86/entry/syscall_64.c:87) entry_SYSCALL_64_after_hwframe+0x77/0x7f (?:?) | ||||
| CVE-2026-72365 | 1 Linux | 1 Linux Kernel | 2026-08-17 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: netfs: Fix writethrough to use collection offload Fix writethrough write to set NETFS_RREQ_OFFLOAD_COLLECTION on the request so that collection is processed asynchronously rather than only right at the end - and also so that asynchronous O_SYNC writes get collected at all. | ||||
| CVE-2026-72336 | 1 Linux | 1 Linux Kernel | 2026-08-17 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: Bluetooth: 6lowpan: hold L2CAP conn across debugfs control get_l2cap_conn() looks up an LE hci_conn under hdev protection, but then drops that protection before reading hcon->l2cap_data and before lowpan_control_write() later dereferences conn->hcon. A disconnect or device close can tear down the same L2CAP connection in that window. The buggy scenario involves two paths, with each column showing the order within that path: 6LoWPAN control write: HCI disconnect/device close: 1. get_l2cap_conn() finds hcon 1. hci_disconn_cfm() dispatches and hcon->l2cap_data. the L2CAP disconnect callback. 2. get_l2cap_conn() drops hdev 2. l2cap_conn_del() clears protection and returns conn. hcon->l2cap_data and drops the L2CAP connection reference. 3. lowpan_control_write() reads 3. hci_conn_del() removes and drops conn->hcon. the HCI connection. Take a reference to the L2CAP connection with l2cap_conn_hold_unless_zero() while hdev is still locked, and drop that reference after the debugfs command's last use of conn. This mirrors the existing L2CAP ACL receive-side handoff and keeps the connection dereferenceable after leaving hdev protection. Export the existing helper so the bluetooth_6lowpan module can use the same lifetime primitive. Validation reproduced this kernel report: BUG: KASAN: slab-use-after-free in lowpan_control_write+0x374/0x520 The buggy address belongs to the object at ffff888111b9d000 which belongs to the cache kmalloc-1k of size 1024 The buggy address is located 0 bytes inside of freed 1024-byte region [ffff888111b9d000, ffff888111b9d400) Read of size 8 Call trace: dump_stack_lvl+0x66/0xa0 print_report+0xce/0x5f0 lowpan_control_write+0x374/0x520 (net/bluetooth/6lowpan.c:1131) srso_alias_return_thunk+0x5/0xfbef5 __virt_addr_valid+0x19f/0x330 kasan_report+0xe0/0x110 __debugfs_file_get+0xf7/0x400 full_proxy_write+0x9e/0xd0 vfs_write+0x1b0/0x810 ksys_write+0xd2/0x170 dnotify_flush+0x32/0x220 do_syscall_64+0x115/0x6a0 (arch/x86/entry/syscall_64.c:87) entry_SYSCALL_64_after_hwframe+0x77/0x7f Allocated by task stack: kasan_save_stack+0x33/0x60 kasan_save_track+0x17/0x60 __kasan_kmalloc+0xaa/0xb0 l2cap_conn_add+0x45/0x520 l2cap_chan_connect+0xac6/0xd90 l2cap_sock_connect+0x216/0x350 __sys_connect+0x101/0x130 __x64_sys_connect+0x40/0x50 do_syscall_64+0x115/0x6a0 (arch/x86/entry/syscall_64.c:87) entry_SYSCALL_64_after_hwframe+0x77/0x7f Freed by task stack: kasan_save_stack+0x33/0x60 kasan_save_track+0x17/0x60 kasan_save_free_info+0x3b/0x60 __kasan_slab_free+0x5f/0x80 kfree+0x313/0x590 hci_conn_hash_flush+0xc0/0x140 hci_dev_close_sync+0x41a/0xb00 hci_dev_close+0x12f/0x160 hci_sock_ioctl+0x157/0x570 sock_do_ioctl+0xf7/0x210 sock_ioctl+0x32f/0x490 __x64_sys_ioctl+0xc7/0x110 do_syscall_64+0x115/0x6a0 (arch/x86/entry/syscall_64.c:87) entry_SYSCALL_64_after_hwframe+0x77/0x7f kasan_record_aux_stack+0xa7/0xc0 insert_work+0x32/0x100 __queue_work+0x262/0xa60 queue_work_on+0xad/0xb0 l2cap_connect_cfm+0x4ef/0x670 hci_le_remote_feat_complete_evt+0x247/0x430 hci_event_packet+0x360/0x6f0 hci_rx_work+0x2ae/0x7a0 process_one_work+0x4fd/0xbc0 worker_thread+0x2d8/0x570 kthread+0x1ad/0x1f0 ret_from_fork+0x3c9/0x540 ret_from_fork_asm+0x1a/0x30 | ||||
| CVE-2026-72079 | 1 Linux | 1 Linux Kernel | 2026-08-17 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: Input: ims-pcu - fix use-after-free and double-free in disconnect ims_pcu_disconnect() only intended to perform cleanup when the primary (control) interface is unbound. However, it currently relies on the interface class to distinguish between control and data interfaces. A malicious device could present a data interface with the same class as the control interface, leading to premature cleanup and potential use-after-free or double-free. Switch to verifying that the interface being disconnected is indeed the control interface. | ||||
| CVE-2026-72047 | 1 Linux | 1 Linux Kernel | 2026-08-17 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: ieee802154: ca8210: fix pointer truncation in kfifo on 64-bit ca8210_test_int_driver_write() and ca8210_test_int_user_read() exchange a kmalloc'd buffer pointer through a struct kfifo, but pass a literal '4' as the byte count to kfifo_in()/kfifo_out(). This is correct on 32-bit (pointer = 4 bytes), but on 64-bit only the low 4 bytes of the 8-byte pointer are written into the FIFO. The reader then reads back 4 bytes into an 8-byte local pointer variable, leaving the upper 4 bytes uninitialized stack data. The first dereference of the reconstructed pointer (fifo_buffer[1]) accesses an arbitrary kernel address and generally results in an oops. Use sizeof(fifo_buffer) so the byte count matches pointer width on every architecture. The driver has no architecture restriction in Kconfig, so any 64-bit build with CONFIG_IEEE802154_CA8210_DEBUGFS=y is exposed. Issue has been latent since the driver was added in 2017 because it is most commonly deployed on 32-bit MCUs. Found via a custom Coccinelle semantic patch hunting for short-byte kfifo I/O on byte-mode kfifos used to shuttle pointers. | ||||
| CVE-2026-72028 | 1 Linux | 1 Linux Kernel | 2026-08-17 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: riscv: probes: save original sp in rethook trampoline Reading a word from the stack in a kretprobe crashes a risc-v kernel. $ cd /sys/kernel/tracing/ $ echo 'r n_tty_write $stack0' > dynamic_events $ echo 1 > events/kprobes/enable Unable to handle kernel paging request at virtual address 0000000200000128 ... [<ffffffff80016d16>] regs_get_kernel_stack_nth+0x26/0x38 [<ffffffff80177196>] process_fetch_insn+0x3ee/0x760 [<ffffffff80177836>] kretprobe_trace_func+0x116/0x1f0 [<ffffffff8017795a>] kretprobe_dispatcher+0x4a/0x58 [<ffffffff8013572e>] kretprobe_rethook_handler+0x5e/0x90 [<ffffffff80180838>] rethook_trampoline_handler+0x70/0x108 [<ffffffff8001ba32>] arch_rethook_trampoline_callback+0x12/0x1c [<ffffffff8001ba84>] arch_rethook_trampoline+0x48/0x94 [<ffffffff8067872a>] tty_write+0x1a/0x30 In regs_get_kernel_stack_nth, regs->sp contains an arbitrary value. arch_rethook_trampoline saves the registers from the probed function in a struct pt_regs. sp is not saved. Instead, sp is decremented for arch_rethook_trampoline's local stack. Fix this crash and save the original sp along with the other registers. Use a0 as a temporary register, it is overwritten anyway. [pjw@kernel.org: added Fixes tag; cc'ed stable] | ||||
| CVE-2026-12364 | 1 Zephyrproject | 1 Zephyr | 2026-08-14 | 8.4 High |
| The user-space system-call verifier z_vrfy_z_log_msg_static_create() in subsys/logging/log_msg.c was a pure pass-through: it forwarded the caller-supplied source, desc, package, and data arguments directly to the kernel-mode implementation z_impl_z_log_msg_static_create() without performing any of the mandatory K_SYSCALL_* checks. Because z_log_msg_static_create() is declared __syscall, under CONFIG_USERSPACE any unprivileged user-mode thread can invoke it directly with fully attacker-controlled arguments. The kernel-mode handler dereferences each of these untrusted values: frontend_runtime_filtering() reads through the source pointer as a struct log_source_dynamic_data, cbprintf_package_copy() reads desc.package_len bytes from the package pointer, and z_log_msg_finalize() performs a memcpy() of desc.data_len bytes from the data pointer. With no verification, a user thread can supply arbitrary kernel addresses and arbitrary lengths, and the kernel will read from them. The impact is a kernel-mode denial of service (the kernel faults dereferencing an attacker-chosen pointer) and, where a log backend output is observable to the attacker, disclosure of arbitrary kernel memory copied into the emitted log message — a confidentiality breach across the user/kernel boundary that the userspace sandbox is meant to enforce. The reads do not corrupt kernel memory, so there is no out-of-bounds write primitive. The fix adds the required validation to the verifier: it bounds desc.package_len against Z_LOG_MSG_MAX_PACKAGE, rejects non-NULL/length mismatches, and applies K_SYSCALL_MEMORY_READ() to package, data, and (when runtime filtering with a frontend is enabled) source, so any out-of-bounds or kernel pointer now raises K_OOPS instead of being honored. | ||||
| CVE-2026-70637 | 1 Hfiref0x | 1 Lightftp | 2026-08-14 | 5.9 Medium |
| LightFTP through 2.4 contains multiple data race vulnerabilities in ftpserv.c that allow anonymous attackers to cause undefined behavior by issuing LIST followed by ABOR commands without authentication. The control thread closes data_socket and file_fd descriptors while worker threads concurrently operate on the same fields in worker_thread_cleanup, allowing stale file descriptors to be reassigned by the OS and subsequently used by worker threads on unrelated resources, resulting in potential denial of service. | ||||
| CVE-2026-70631 | 1 Ffmpeg | 1 Ffmpeg | 2026-08-14 | 5.5 Medium |
| FFmpeg versions from 0.5 up to, but not including, 9.0 contain an uninitialized heap memory disclosure vulnerability in the native TIFF decoder in libavcodec/tiff.c. An attacker who can cause FFmpeg to decode a crafted TIFF file can supply a valid Deflate-compressed strip that terminates successfully after producing fewer bytes than the declared strip requires. The tiff_unpack_zlib() function allocates a heap buffer sized for the full declared strip but copies all declared rows via memcpy() regardless of how many bytes zlib actually decompressed, causing unwritten bytes that can contain stale data from prior heap allocations to be incorporated into decoded image output and potentially exposing sensitive data in persistent services. | ||||
| CVE-2026-70630 | 1 Ffmpeg | 1 Ffmpeg | 2026-08-14 | 5.5 Medium |
| FFmpeg versions from 3.0 up to, but not including, 9.0 contain an uninitialized heap memory read vulnerability in the native Screenpresso decoder (libavcodec/screenpresso.c) that allows attackers to recover sensitive memory contents by supplying a crafted SPV1 packet with a valid zlib stream that decompresses fewer bytes than the full frame requires. The screenpresso_decode_frame() function fails to validate the produced byte count before calling av_image_copy_plane() to copy the complete frame dimensions from the persistent ctx->inflated_buf buffer, causing unwritten heap memory from prior allocations or prior frames to be copied into decoded output and potentially exposing sensitive data such as userspace addresses from persistent decoding services. | ||||
| CVE-2026-43631 | 2 Ggml, Ggml-org | 2 Llama.cpp, Llama.cpp | 2026-08-14 | 8.1 High |
| llama.cpp builds b7492 through the latest b9060 contains a use-after-free vulnerability in the vocab pointer of llama-server when the --sleep-idle-seconds feature is enabled, allowing unauthenticated remote attackers to execute arbitrary code. Attackers can trigger the vulnerability by sending requests to affected endpoints while the server transitions to sleep mode, causing concurrent worker threads to dereference a freed vocab pointer that can be reclaimed with attacker-controlled data to achieve remote code execution. | ||||
| CVE-2026-53175 | 1 Linux | 1 Linux Kernel | 2026-08-14 | 9.8 Critical |
| In the Linux kernel, the following vulnerability has been resolved: inet: frags: fix use-after-free caused by the fqdir_pre_exit() flush On netns teardown, fqdir_pre_exit() walks the fqdir rhashtable and flushes every fragment queue that is not yet complete using inet_frag_queue_flush(). That helper frees all the skbs queued on the fragment queue but does not set INET_FRAG_COMPLETE, and leaves q->fragments_tail and q->last_run_head pointing at the freed skbs. The queue itself stays in the rhashtable. fqdir_pre_exit() first lowers high_thresh to 0 to stop new queue lookups, but it cannot stop a fragment that already obtained the queue through inet_frag_find() earlier and stalled just before taking the queue lock. Once that fragment resumes after the flush and takes the queue lock, it passes the INET_FRAG_COMPLETE check and then dereferences the freed fragments_tail. inet_frag_queue_insert() reads FRAG_CB() and ->len of that pointer and, on the append path, writes ->next_frag, causing a slab use-after-free. IPv6, nf_conntrack_reasm6 and 6lowpan reassembly share the same flush path and are affected as well. Reset rb_fragments, fragments_tail and last_run_head in inet_frag_queue_flush() so a flushed queue no longer points at the freed skbs. A fragment that resumes after the flush and takes the queue lock then finds an empty queue and starts a new run instead of dereferencing the freed fragments_tail. ip_frag_reinit() already performed this reset after its own flush, so drop the now duplicate code there. | ||||
| CVE-2026-61360 | 1 Microsoft | 26 Windows 10 1607, Windows 10 1809, Windows 10 21h2 and 23 more | 2026-08-14 | 5.5 Medium |
| Untrusted pointer dereference in Windows GDI allows an authorized attacker to disclose information locally. | ||||
| CVE-2026-68399 | 1 Linux | 1 Linux Kernel | 2026-08-14 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: bpf: Fix UAF in sock clone early bailouts Similar to recent commit 9b51a6155d14 ("bpf,fork: wipe ->bpf_storage before bailouts that access it"), sk_clone() performs an initial shallow copy of the socket field ->sk_bpf_storage via sock_copy() for the cloned socket newsk. If sk_clone() bails out early (e.g. if sk_filter_charge() fails) prior to calling bpf_sk_storage_clone(), newsk->sk_bpf_storage still points to the parent socket's BPF local storage. When newsk is subsequently freed via sk_free(), the deallocation path (__sk_destruct() -> bpf_sk_storage_free()) destroys the parent socket's BPF local storage, leading to a use-after-free (UAF) on the parent socket. Fix this by resetting newsk->sk_bpf_storage to NULL immediately after sock_copy() in sk_clone(), and remove the now redundant initialization from bpf_sk_storage_clone(). | ||||
| CVE-2026-68245 | 1 Linux | 1 Linux Kernel | 2026-08-14 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: drm/amdgpu: fix lifetime issue of amdgpu_vm_get_task_info_pasid() The vm pointer returned from amdgpu_vm_get_vm_from_pasid() is only valid while the lock is still being held. Once xa_unlock_irqrestore is called and returned, the pointer is no longer under lock and is subject to modification. Since, the caller still dereferences vm->task_info in amdgpu_vm_get_task_info_vm() after the lock is removed, this causes a use after unlock problem. Remove the lifetime issue present in amdgpu_vm_get_task_info_pasid() through removing the amdgpu_vm_get_vm_from_pasid() function from amdgpu_vm.c and making the relevant code inline to hold the lock while it is still in use. (cherry picked from commit 9d01579f3f868b333acc901815972685989092c7) | ||||