| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
btrfs: fix leak of kobject name for sub-group space_info
When create_space_info_sub_group() allocates elements of
space_info->sub_group[], kobject_init_and_add() is called for each
element via btrfs_sysfs_add_space_info_type(). However, when
check_removing_space_info() frees these elements, it does not call
btrfs_sysfs_remove_space_info() on them. As a result, kobject_put() is
not called and the associated kobj->name objects are leaked.
This memory leak is reproduced by running the blktests test case
zbd/009 on kernels built with CONFIG_DEBUG_KMEMLEAK. The kmemleak
feature reports the following error:
unreferenced object 0xffff888112877d40 (size 16):
comm "mount", pid 1244, jiffies 4294996972
hex dump (first 16 bytes):
64 61 74 61 2d 72 65 6c 6f 63 00 c4 c6 a7 cb 7f data-reloc......
backtrace (crc 53ffde4d):
__kmalloc_node_track_caller_noprof+0x619/0x870
kstrdup+0x42/0xc0
kobject_set_name_vargs+0x44/0x110
kobject_init_and_add+0xcf/0x150
btrfs_sysfs_add_space_info_type+0xfc/0x210 [btrfs]
create_space_info_sub_group.constprop.0+0xfb/0x1b0 [btrfs]
create_space_info+0x211/0x320 [btrfs]
btrfs_init_space_info+0x15a/0x1b0 [btrfs]
open_ctree+0x33c7/0x4a50 [btrfs]
btrfs_get_tree.cold+0x9f/0x1ee [btrfs]
vfs_get_tree+0x87/0x2f0
vfs_cmd_create+0xbd/0x280
__do_sys_fsconfig+0x3df/0x990
do_syscall_64+0x136/0x1540
entry_SYSCALL_64_after_hwframe+0x76/0x7e
To avoid the leak, call btrfs_sysfs_remove_space_info() instead of
kfree() for the elements. |
| In the Linux kernel, the following vulnerability has been resolved:
mm/damon/core: avoid use of half-online-committed context
One major usage of damon_call() is online DAMON parameters update. It is
done by calling damon_commit_ctx() inside the damon_call() callback
function. damon_commit_ctx() can fail for two reasons: 1) invalid
parameters and 2) internal memory allocation failures. In case of
failures, the damon_ctx that attempted to be updated (commit destination)
can be partially updated (or, corrupted from a perspective), and therefore
shouldn't be used anymore. The function only ensures the damon_ctx object
can safely deallocated using damon_destroy_ctx().
The API callers are, however, calling damon_commit_ctx() only after
asserting the parameters are valid, to avoid damon_commit_ctx() fails due
to invalid input parameters. But it can still theoretically fail if the
internal memory allocation fails. In the case, DAMON may run with the
partially updated damon_ctx. This can result in unexpected behaviors
including even NULL pointer dereference in case of damos_commit_dests()
failure [1]. Such allocation failure is arguably too small to fail, so
the real world impact would be rare. But, given the bad consequence, this
needs to be fixed.
Avoid such partially-committed (maybe-corrupted) damon_ctx use by saving
the damon_commit_ctx() failure on the damon_ctx object. For this,
introduce damon_ctx->maybe_corrupted field. damon_commit_ctx() sets it
when it is failed. kdamond_call() checks if the field is set after each
damon_call_control->fn() is executed. If it is set, ignore remaining
callback requests and return. All kdamond_call() callers including
kdamond_fn() also check the maybe_corrupted field right after
kdamond_call() invocations. If the field is set, break the kdamond_fn()
main loop so that DAMON sill doesn't use the context that might be
corrupted.
[sj@kernel.org: let kdamond_call() with cancel regardless of maybe_corrupted] |
| In the Linux kernel, the following vulnerability has been resolved:
udp: Fix wildcard bind conflict check when using hash2
When binding a udp_sock to a local address and port, UDP uses
two hashes (udptable->hash and udptable->hash2) for collision
detection. The current code switches to "hash2" when
hslot->count > 10.
"hash2" is keyed by local address and local port.
"hash" is keyed by local port only.
The issue can be shown in the following bind sequence (pseudo code):
bind(fd1, "[fd00::1]:8888")
bind(fd2, "[fd00::2]:8888")
bind(fd3, "[fd00::3]:8888")
bind(fd4, "[fd00::4]:8888")
bind(fd5, "[fd00::5]:8888")
bind(fd6, "[fd00::6]:8888")
bind(fd7, "[fd00::7]:8888")
bind(fd8, "[fd00::8]:8888")
bind(fd9, "[fd00::9]:8888")
bind(fd10, "[fd00::10]:8888")
/* Correctly return -EADDRINUSE because "hash" is used
* instead of "hash2". udp_lib_lport_inuse() detects the
* conflict.
*/
bind(fail_fd, "[::]:8888")
/* After one more socket is bound to "[fd00::11]:8888",
* hslot->count exceeds 10 and "hash2" is used instead.
*/
bind(fd11, "[fd00::11]:8888")
bind(fail_fd, "[::]:8888") /* succeeds unexpectedly */
The same issue applies to the IPv4 wildcard address "0.0.0.0"
and the IPv4-mapped wildcard address "::ffff:0.0.0.0". For
example, if there are existing sockets bound to
"192.168.1.[1-11]:8888", then binding "0.0.0.0:8888" or
"[::ffff:0.0.0.0]:8888" can also miss the conflict when
hslot->count > 10.
TCP inet_csk_get_port() already has the correct check in
inet_use_bhash2_on_bind(). Rename it to
inet_use_hash2_on_bind() and move it to inet_hashtables.h
so udp.c can reuse it in this fix. |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: L2CAP: Fix null-ptr-deref on l2cap_sock_ready_cb
Before using sk pointer, check if it is null.
Fix the following:
KASAN: null-ptr-deref in range [0x0000000000000260-0x0000000000000267]
CPU: 0 UID: 0 PID: 5985 Comm: kworker/0:5 Not tainted 7.0.0-rc4-00029-ga989fde763f4 #1 PREEMPT(full)
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.17.0-9.fc43 06/10/2025
Workqueue: events l2cap_info_timeout
RIP: 0010:kasan_byte_accessible+0x12/0x30
Code: 79 ff ff ff 0f 1f 40 00 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 0f 1f 40 d6 48 c1 ef 03 48 b8 00 00 00 00 00 fc ff df <0f> b6 04 07 3c 08 0f 92 c0 c3 cc cce
veth0_macvtap: entered promiscuous mode
RSP: 0018:ffffc90006e0f808 EFLAGS: 00010202
RAX: dffffc0000000000 RBX: ffffffff89746018 RCX: 0000000080000001
RDX: 0000000000000000 RSI: ffffffff89746018 RDI: 000000000000004c
RBP: 0000000000000000 R08: 0000000000000001 R09: 0000000000000000
R10: dffffc0000000000 R11: ffffffff8aae3e70 R12: 0000000000000000
R13: 0000000000000260 R14: 0000000000000260 R15: 0000000000000001
FS: 0000000000000000(0000) GS:ffff8880983c2000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00005582615a5008 CR3: 000000007007e000 CR4: 0000000000752ef0
PKRU: 55555554
Call Trace:
<TASK>
__kasan_check_byte+0x12/0x40
lock_acquire+0x79/0x2e0
lock_sock_nested+0x48/0x100
? l2cap_sock_ready_cb+0x46/0x160
l2cap_sock_ready_cb+0x46/0x160
l2cap_conn_start+0x779/0xff0
? __pfx_l2cap_conn_start+0x10/0x10
? l2cap_info_timeout+0x60/0xa0
? __pfx___mutex_lock+0x10/0x10
l2cap_info_timeout+0x68/0xa0
? process_scheduled_works+0xa8d/0x18c0
process_scheduled_works+0xb6e/0x18c0
? __pfx_process_scheduled_works+0x10/0x10
? assign_work+0x3d5/0x5e0
worker_thread+0xa53/0xfc0
kthread+0x388/0x470
? __pfx_worker_thread+0x10/0x10
? __pfx_kthread+0x10/0x10
ret_from_fork+0x51e/0xb90
? __pfx_ret_from_fork+0x10/0x10
veth1_macvtap: entered promiscuous mode
? __switch_to+0xc7d/0x1450
? __pfx_kthread+0x10/0x10
ret_from_fork_asm+0x1a/0x30
</TASK>
Modules linked in:
---[ end trace 0000000000000000 ]---
batman_adv: batadv0: Interface activated: batadv_slave_0
batman_adv: batadv0: Interface activated: batadv_slave_1
netdevsim netdevsim7 netdevsim0: set [1, 0] type 2 family 0 port 6081 - 0
netdevsim netdevsim7 netdevsim1: set [1, 0] type 2 family 0 port 6081 - 0
netdevsim netdevsim7 netdevsim2: set [1, 0] type 2 family 0 port 6081 - 0
netdevsim netdevsim7 netdevsim3: set [1, 0] type 2 family 0 port 6081 - 0
RIP: 0010:kasan_byte_accessible+0x12/0x30
Code: 79 ff ff ff 0f 1f 40 00 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 0f 1f 40 d6 48 c1 ef 03 48 b8 00 00 00 00 00 fc ff df <0f> b6 04 07 3c 08 0f 92 c0 c3 cc cce
ieee80211 phy39: Selected rate control algorithm 'minstrel_ht'
RSP: 0018:ffffc90006e0f808 EFLAGS: 00010202
RAX: dffffc0000000000 RBX: ffffffff89746018 RCX: 0000000080000001
RDX: 0000000000000000 RSI: ffffffff89746018 RDI: 000000000000004c
RBP: 0000000000000000 R08: 0000000000000001 R09: 0000000000000000
R10: dffffc0000000000 R11: ffffffff8aae3e70 R12: 0000000000000000
R13: 0000000000000260 R14: 0000000000000260 R15: 0000000000000001
FS: 0000000000000000(0000) GS:ffff8880983c2000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007f7e16139e9c CR3: 000000000e74e000 CR4: 0000000000752ef0
PKRU: 55555554
Kernel panic - not syncing: Fatal exception |
| In the Linux kernel, the following vulnerability has been resolved:
spi: spi-fsl-lpspi: fix teardown order issue (UAF)
There is a teardown order issue in the driver. The SPI controller is
registered using devm_spi_register_controller(), which delays
unregistration of the SPI controller until after the fsl_lpspi_remove()
function returns.
As the fsl_lpspi_remove() function synchronously tears down the DMA
channels, a running SPI transfer triggers the following NULL pointer
dereference due to use after free:
| fsl_lpspi 42550000.spi: I/O Error in DMA RX
| Unable to handle kernel NULL pointer dereference at virtual address 0000000000000000
[...]
| Call trace:
| fsl_lpspi_dma_transfer+0x260/0x340 [spi_fsl_lpspi]
| fsl_lpspi_transfer_one+0x198/0x448 [spi_fsl_lpspi]
| spi_transfer_one_message+0x49c/0x7c8
| __spi_pump_transfer_message+0x120/0x420
| __spi_sync+0x2c4/0x520
| spi_sync+0x34/0x60
| spidev_message+0x20c/0x378 [spidev]
| spidev_ioctl+0x398/0x750 [spidev]
[...]
Switch from devm_spi_register_controller() to spi_register_controller() in
fsl_lpspi_probe() and add the corresponding spi_unregister_controller() in
fsl_lpspi_remove(). |
| In the Linux kernel, the following vulnerability has been resolved:
hwmon: (pmbus/core) Protect regulator operations with mutex
The regulator operations pmbus_regulator_get_voltage(),
pmbus_regulator_set_voltage(), and pmbus_regulator_list_voltage()
access PMBus registers and shared data but were not protected by
the update_lock mutex. This could lead to race conditions.
However, adding mutex protection directly to these functions causes
a deadlock because pmbus_regulator_notify() (which calls
regulator_notifier_call_chain()) is often called with the mutex
already held (e.g., from pmbus_fault_handler()). If a regulator
callback then calls one of the now-protected voltage functions,
it will attempt to acquire the same mutex.
Rework pmbus_regulator_notify() to utilize a worker function to
send notifications outside of the mutex protection. Events are
stored as atomics in a per-page bitmask and processed by the worker.
Initialize the worker and its associated data during regulator
registration, and ensure it is cancelled on device removal using
devm_add_action_or_reset().
While at it, remove the unnecessary include of linux/of.h. |
| In the Linux kernel, the following vulnerability has been resolved:
xfrm: iptfs: fix skb_put() panic on non-linear skb during reassembly
In iptfs_reassem_cont(), IP-TFS attempts to append data to the new inner
packet 'newskb' that is being reassembled. First a zero-copy approach is
tried if it succeeds then newskb becomes non-linear.
When a subsequent fragment in the same datagram does not meet the
fast-path conditions, a memory copy is performed. It calls skb_put() to
append the data and as newskb is non-linear it triggers
SKB_LINEAR_ASSERT check.
Oops: invalid opcode: 0000 [#1] SMP NOPTI
[...]
RIP: 0010:skb_put+0x3c/0x40
[...]
Call Trace:
<IRQ>
iptfs_reassem_cont+0x1ab/0x5e0 [xfrm_iptfs]
iptfs_input_ordered+0x2af/0x380 [xfrm_iptfs]
iptfs_input+0x122/0x3e0 [xfrm_iptfs]
xfrm_input+0x91e/0x1a50
xfrm4_esp_rcv+0x3a/0x110
ip_protocol_deliver_rcu+0x1d7/0x1f0
ip_local_deliver_finish+0xbe/0x1e0
__netif_receive_skb_core.constprop.0+0xb56/0x1120
__netif_receive_skb_list_core+0x133/0x2b0
netif_receive_skb_list_internal+0x1ff/0x3f0
napi_complete_done+0x81/0x220
virtnet_poll+0x9d6/0x116e [virtio_net]
__napi_poll.constprop.0+0x2b/0x270
net_rx_action+0x162/0x360
handle_softirqs+0xdc/0x510
__irq_exit_rcu+0xe7/0x110
irq_exit_rcu+0xe/0x20
common_interrupt+0x85/0xa0
</IRQ>
<TASK>
Fix this by checking if the skb is non-linear. If it is, linearize it by
calling skb_linearize(). As the initial allocation of newskb originally
reserved enough tailroom for the entire reassembled packet we do not
need to check if we have enough tailroom or extend it. |
| In the Linux kernel, the following vulnerability has been resolved:
virtio_net: Fix UAF on dst_ops when IFF_XMIT_DST_RELEASE is cleared and napi_tx is false
A UAF issue occurs when the virtio_net driver is configured with napi_tx=N
and the device's IFF_XMIT_DST_RELEASE flag is cleared
(e.g., during the configuration of tc route filter rules).
When IFF_XMIT_DST_RELEASE is removed from the net_device, the network stack
expects the driver to hold the reference to skb->dst until the packet
is fully transmitted and freed. In virtio_net with napi_tx=N,
skbs may remain in the virtio transmit ring for an extended period.
If the network namespace is destroyed while these skbs are still pending,
the corresponding dst_ops structure has freed. When a subsequent packet
is transmitted, free_old_xmit() is triggered to clean up old skbs.
It then calls dst_release() on the skb associated with the stale dst_entry.
Since the dst_ops (referenced by the dst_entry) has already been freed,
a UAF kernel paging request occurs.
fix it by adds skb_dst_drop(skb) in start_xmit to explicitly release
the dst reference before the skb is queued in virtio_net.
Call Trace:
Unable to handle kernel paging request at virtual address ffff80007e150000
CPU: 2 UID: 0 PID: 6236 Comm: ping Kdump: loaded Not tainted 7.0.0-rc1+ #6 PREEMPT
...
percpu_counter_add_batch+0x3c/0x158 lib/percpu_counter.c:98 (P)
dst_release+0xe0/0x110 net/core/dst.c:177
skb_release_head_state+0xe8/0x108 net/core/skbuff.c:1177
sk_skb_reason_drop+0x54/0x2d8 net/core/skbuff.c:1255
dev_kfree_skb_any_reason+0x64/0x78 net/core/dev.c:3469
napi_consume_skb+0x1c4/0x3a0 net/core/skbuff.c:1527
__free_old_xmit+0x164/0x230 drivers/net/virtio_net.c:611 [virtio_net]
free_old_xmit drivers/net/virtio_net.c:1081 [virtio_net]
start_xmit+0x7c/0x530 drivers/net/virtio_net.c:3329 [virtio_net]
...
Reproduction Steps:
NETDEV="enp3s0"
config_qdisc_route_filter() {
tc qdisc del dev $NETDEV root
tc qdisc add dev $NETDEV root handle 1: prio
tc filter add dev $NETDEV parent 1:0 \
protocol ip prio 100 route to 100 flowid 1:1
ip route add 192.168.1.100/32 dev $NETDEV realm 100
}
test_ns() {
ip netns add testns
ip link set $NETDEV netns testns
ip netns exec testns ifconfig $NETDEV 10.0.32.46/24
ip netns exec testns ping -c 1 10.0.32.1
ip netns del testns
}
config_qdisc_route_filter
test_ns
sleep 2
test_ns |
| SocialEngine versions 7.8.0 and prior contain a SQL injection vulnerability in the /activity/index/get-memberall endpoint where user-supplied input passed via the text parameter is not sanitized before being incorporated into a SQL query. An unauthenticated remote attacker can exploit this vulnerability to read arbitrary data from the database, reset administrator account passwords, and gain unauthorized access to the Packages Manager in the Admin Panel, potentially enabling remote code execution. |
| Froxlor is open source server administration software. Prior to version 2.3.6, in `EmailSender::add()`, the domain ownership validation for full email sender aliases uses the wrong array index when splitting the email address, passing the local part instead of the domain to `validateLocalDomainOwnership()`. This causes the ownership check to always pass for non-existent "domains," allowing any authenticated customer to add sender aliases for email addresses on domains belonging to other customers. Postfix's `sender_login_maps` then authorizes the attacker to send emails as those addresses. Version 2.3.6 fixes the issue. |
| Froxlor is open source server administration software. Prior to version 2.3.6, the Froxlor API endpoint `Customers.update` (and `Admins.update`) does not validate the `def_language` parameter against the list of available language files. An authenticated customer can set `def_language` to a path traversal payload (e.g., `../../../../../var/customers/webs/customer1/evil`), which is stored in the database. On subsequent requests, `Language::loadLanguage()` constructs a file path using this value and executes it via `require`, achieving arbitrary PHP code execution as the web server user. Version 2.3.6 fixes the issue. |
| Paperclip is a Node.js server and React UI that orchestrates a team of AI agents to run a business. Versions of @paperclipai/server prior to 2026.416.0 contain a privilege escalation vulnerability that allows an attacker with an Agent API key to execute arbitrary OS commands on the Paperclip server host. An attacker with an agent credential can escalate privileges from the agent runtime to the Paperclip server host. The vulnerability occurs because agents are allowed to update their own adapterConfig via the /agents/:id API endpoint. The configuration field adapterConfig.workspaceStrategy.provisionCommand is later executed by the server runtime. As a result, an attacker controlling an agent credential can inject arbitrary shell commands which are executed by the Paperclip server during workspace provisioning. This breaks the intended trust boundary between agent runtime configuration and server host execution, allowing a compromised or malicious agent to escalate privileges and run commands on the host system. This vulnerability allows remote code execution on the server host. @paperclipai/server version 2026.416.0 fixes the issue. |
| Rclone is a command-line program to sync files and directories to and from different cloud storage providers. The RC endpoint `options/set` is exposed without `AuthRequired: true`, but it can mutate global runtime configuration, including the RC option block itself. Starting in version 1.45.0 and prior to version 1.73.5, an unauthenticated attacker can set `rc.NoAuth=true`, which disables the authorization gate for many RC methods registered with `AuthRequired: true` on reachable RC servers that are started without global HTTP authentication. This can lead to unauthorized access to sensitive administrative functionality, including configuration and operational RC methods. Version 1.73.5 patches the issue. |
| Squidex is an open source headless content management system and content management hub. Prior to version 7.23.0, the `RestoreController.PostRestoreJob` endpoint allows an administrator to supply an arbitrary URL for downloading backup archives. This URL is fetched using the "Backup" `HttpClient` without any SSRF protection. A malicious or compromised admin can use this endpoint to probe internal network services, access cloud metadata endpoints, or perform internal reconnaissance. The vulnerability is authenticated (Admin-only) but highly impactful, allowing potential access to sensitive internal resources. Version 7.23.0 contains a fix. |
| A flaw was found in util-linux. Improper hostname canonicalization in the `login(1)` utility, when invoked with the `-h` option, can modify the supplied remote hostname before setting `PAM_RHOST`. A remote attacker could exploit this by providing a specially crafted hostname, potentially bypassing host-based Pluggable Authentication Modules (PAM) access control rules that rely on fully qualified domain names. This could lead to unauthorized access. |
| Unisys WebPerfect Image Suite versions 3.0.3960.22810 and 3.0.3960.22604 expose an unauthenticated WCF SOAP endpoint on TCP port 1208 that accepts unsanitized file paths in the ReadLicense action's LFName parameter, allowing remote attackers to trigger SMB connections and leak NTLMv2 machine-account hashes. Attackers can submit crafted SOAP requests with UNC paths to force the server to initiate outbound SMB connections, exposing authentication credentials that may be relayed for privilege escalation or lateral movement within the network. |
| Unisys WebPerfect Image Suite versions 3.0.3960.22810 and 3.0.3960.22604 expose a deprecated .NET Remoting TCP channel that allows remote unauthenticated attackers to leak NTLMv2 machine-account hashes by supplying a Windows UNC path as a target file argument through object-unmarshalling techniques. Attackers can capture the leaked NTLMv2 hash and relay it to other hosts to achieve privilege escalation or lateral movement depending on network configuration and patch level. |
| A flaw was found in the X.Org X server. This integer underflow vulnerability, specifically in the XKB compatibility map handling, allows an attacker with local or remote X11 server access to trigger a buffer read overrun. This can lead to memory-safety violations and potentially a denial of service (DoS) or other severe impacts. |
| Kofax Capture, now referred to as Tungsten Capture, version 6.0.0.0 (other versions may be affected) exposes a deprecated .NET Remoting HTTP channel on port 2424 via the Ascent Capture Service that is accessible without authentication and uses a default, publicly known endpoint identifier. An unauthenticated remote attacker can exploit .NET Remoting object unmarshalling techniques to instantiate a remote System.Net.WebClient object and read arbitrary files from the server filesystem, write attacker-controlled files to the server, or coerce NTLMv2 authentication to an attacker-controlled host, enabling sensitive credential disclosure, denial of service, remote code execution, or lateral movement depending on service account privileges and network environment. |
| Cross-Site Request Forgery (CSRF) vulnerability in Heateor Support Heateor Social Login heateor-social-login allows Cross Site Request Forgery.This issue affects Heateor Social Login: from n/a through <= 1.1.39. |
