| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| A vulnerability in the Voice Telephony Service Provider (VTSP) service of Cisco IOS Software and Cisco IOS XE Software could allow an unauthenticated, remote attacker to bypass configured destination patterns and dial arbitrary numbers. This vulnerability is due to insufficient validation of dial strings at Foreign Exchange Office (FXO) interfaces. An attacker could exploit this vulnerability by sending a malformed dial string to an affected device via either the ISDN protocol or SIP. A successful exploit could allow the attacker to conduct toll fraud, resulting in unexpected financial impact to affected customers. |
| A vulnerability in IPv6 traffic processing of Cisco IOS XE Wireless Controller Software for Cisco Catalyst 9000 Family Wireless Controllers could allow an unauthenticated, adjacent attacker to cause a Layer 2 (L2) loop in a configured VLAN, resulting in a denial of service (DoS) condition for that VLAN. The vulnerability is due to a logic error when processing specific link-local IPv6 traffic. An attacker could exploit this vulnerability by sending a crafted IPv6 packet that would flow inbound through the wired interface of an affected device. A successful exploit could allow the attacker to cause traffic drops in the affected VLAN, thus triggering the DoS condition. |
| A vulnerability in the SNMP subsystem of Cisco IOS Software and Cisco IOS XE Software could allow an authenticated, remote attacker to cause a DoS condition on an affected device.
This vulnerability is due to improper error handling when parsing SNMP requests. An attacker could exploit this vulnerability by sending a crafted SNMP request to an affected device. A successful exploit could allow the attacker to cause the device to reload unexpectedly, resulting in a DoS condition.
This vulnerability affects SNMP versions 1, 2c, and 3. To exploit this vulnerability through SNMP v2c or earlier, the attacker must know a valid read-write or read-only SNMP community string for the affected system. To exploit this vulnerability through SNMP v3, the attacker must have valid SNMP user credentials for the affected system. |
| A vulnerability in the web UI feature of Cisco IOS XE Software could allow an authenticated, remote attacker to inject commands with the privileges of root. This vulnerability is due to insufficient input validation. An attacker could exploit this vulnerability by sending crafted input to the web UI. A successful exploit could allow the attacker to inject commands to the underlying operating system with root privileges. |
| Cisco is providing an update for the ongoing investigation into observed exploitation of the web UI feature in Cisco IOS XE Software. We are updating the list of fixed releases and adding the Software Checker. Our investigation has determined that the actors exploited two previously unknown issues. The attacker first exploited CVE-2023-20198 to gain initial access and issued a privilege 15 command to create a local user and password combination. This allowed the user to log in with normal user access. The attacker then exploited another component of the web UI feature, leveraging the new local user to elevate privilege to root and write the implant to the file system. Cisco has assigned CVE-2023-20273 to this issue. CVE-2023-20198 has been assigned a CVSS Score of 10.0. CVE-2023-20273 has been assigned a CVSS Score of 7.2. Both of these CVEs are being tracked by CSCwh87343. |
| A vulnerability in the Cisco Group Encrypted Transport VPN (GET VPN) feature of Cisco IOS Software and Cisco IOS XE Software could allow an authenticated, remote attacker who has administrative control of either a group member or a key server to execute arbitrary code on an affected device or cause the device to crash.
This vulnerability is due to insufficient validation of attributes in the Group Domain of Interpretation (GDOI) and G-IKEv2 protocols of the GET VPN feature. An attacker could exploit this vulnerability by either compromising an installed key server or modifying the configuration of a group member to point to a key server that is controlled by the attacker. A successful exploit could allow the attacker to execute arbitrary code and gain full control of the affected system or cause the affected system to reload, resulting in a denial of service (DoS) condition. For more information, see the Details ["#details"] section of this advisory. |
| A vulnerability in the health check RPM of Cisco IOS XR Software could allow an unauthenticated, remote attacker to access the Redis instance that is running within the NOSi container. This vulnerability exists because the health check RPM opens TCP port 6379 by default upon activation. An attacker could exploit this vulnerability by connecting to the Redis instance on the open port. A successful exploit could allow the attacker to write to the Redis in-memory database, write arbitrary files to the container filesystem, and retrieve information about the Redis database. Given the configuration of the sandboxed container that the Redis instance runs in, a remote attacker would be unable to execute remote code or abuse the integrity of the Cisco IOS XR Software host system. |
| A vulnerability in the Cisco Discovery Protocol implementation for Cisco IOS XR Software could allow an unauthenticated, adjacent attacker to execute arbitrary code or cause a reload on an affected device. The vulnerability is due to improper validation of string input from certain fields in Cisco Discovery Protocol messages. An attacker could exploit this vulnerability by sending a malicious Cisco Discovery Protocol packet to an affected device. A successful exploit could allow the attacker to cause a stack overflow, which could allow the attacker to execute arbitrary code with administrative privileges on an affected device. Cisco Discovery Protocol is a Layer 2 protocol. To exploit this vulnerability, an attacker must be in the same broadcast domain as the affected device (Layer 2 adjacent). |
| A vulnerability in the Distance Vector Multicast Routing Protocol (DVMRP) feature of Cisco IOS XR Software could allow an unauthenticated, remote attacker to exhaust process memory of an affected device. The vulnerability is due to insufficient queue management for Internet Group Management Protocol (IGMP) packets. An attacker could exploit this vulnerability by sending crafted IGMP traffic to an affected device. A successful exploit could allow the attacker to cause memory exhaustion, resulting in instability of other processes. These processes may include, but are not limited to, interior and exterior routing protocols. Cisco will release software updates that address this vulnerability. |
| Multiple vulnerabilities in the Distance Vector Multicast Routing Protocol (DVMRP) feature of Cisco IOS XR Software could allow an unauthenticated, remote attacker to either immediately crash the Internet Group Management Protocol (IGMP) process or make it consume available memory and eventually crash. The memory consumption may negatively impact other processes that are running on the device. These vulnerabilities are due to the incorrect handling of IGMP packets. An attacker could exploit these vulnerabilities by sending crafted IGMP traffic to an affected device. A successful exploit could allow the attacker to immediately crash the IGMP process or cause memory exhaustion, resulting in other processes becoming unstable. These processes may include, but are not limited to, interior and exterior routing protocols. Cisco will release software updates that address these vulnerabilities. |
| A vulnerability in the Hot Standby Router Protocol (HSRP) subsystem of Cisco IOS and IOS XE Software could allow an unauthenticated, adjacent attacker to receive potentially sensitive information from an affected device. The vulnerability is due to insufficient memory initialization. An attacker could exploit this vulnerability by receiving HSRPv2 traffic from an adjacent HSRP member. A successful exploit could allow the attacker to receive potentially sensitive information from the adjacent device. |
| A vulnerability in the Internet Key Exchange Version 2 (IKEv2) support for the AutoReconnect feature of Cisco IOS Software and Cisco IOS XE Software could allow an authenticated, remote attacker to exhaust the free IP addresses from the assigned local pool. This vulnerability occurs because the code does not release the allocated IP address under certain failure conditions. An attacker could exploit this vulnerability by trying to connect to the device with a non-AnyConnect client. A successful exploit could allow the attacker to exhaust the IP addresses from the assigned local pool, which prevents users from logging in and leads to a denial of service (DoS) condition. |
| A vulnerability in the Intermediate System-to-Intermediate System (IS-IS) protocol of Cisco IOS Software and Cisco IOS XE Software could allow an unauthenticated, adjacent attacker to cause a denial of service (DoS) condition on an affected device.
This vulnerability is due to insufficient input validation when parsing an ingress IS-IS packet. An attacker could exploit this vulnerability by sending a crafted IS-IS packet to an affected device after forming an adjacency. A successful exploit could allow the attacker to cause the affected device to reload, resulting in a denial of service (DoS) condition.
Note: The IS-IS protocol is a routing protocol. To exploit this vulnerability, an attacker must be Layer 2-adjacent to the affected device and have formed an adjacency. |
| A vulnerability in the handling of encrypted wireless frames of Cisco Aironet Access Point (AP) Software could allow an unauthenticated, adjacent attacker to cause a denial of service (DoS) condition on the affected device.
This vulnerability is due to incomplete cleanup of resources when dropping certain malformed frames. An attacker could exploit this vulnerability by connecting as a wireless client to an affected AP and sending specific malformed frames over the wireless connection. A successful exploit could allow the attacker to cause degradation of service to other clients, which could potentially lead to a complete DoS condition. |
| A vulnerability in the handling of specific packets that are punted from a line card to a route processor in Cisco IOS XR Software Release 7.9.2 could allow an unauthenticated, adjacent attacker to cause control plane traffic to stop working on multiple Cisco IOS XR platforms.
This vulnerability is due to incorrect handling of packets that are punted to the route processor. An attacker could exploit this vulnerability by sending traffic, which must be handled by the Linux stack on the route processor, to an affected device. A successful exploit could allow the attacker to cause control plane traffic to stop working, resulting in a denial of service (DoS) condition. |
| A vulnerability in the IP packet processing of Cisco Access Point (AP) Software could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition on an affected device.
This vulnerability is due to insufficient input validation of certain IPv4 packets. An attacker could exploit this vulnerability by sending a crafted IPv4 packet either to or through an affected device. A successful exploit could allow the attacker to cause an affected device to reload unexpectedly, resulting in a DoS condition. To successfully exploit this vulnerability, the attacker does not need to be associated with the affected AP. This vulnerability cannot be exploited by sending IPv6 packets. |
| A vulnerability in Cisco IOS Software for Cisco Catalyst 6000 Series Switches could allow an unauthenticated, adjacent attacker to cause an affected device to reload unexpectedly.
This vulnerability is due to improper handling of process-switched traffic. An attacker could exploit this vulnerability by sending crafted traffic to an affected device. A successful exploit could allow the attacker to cause the affected device to reload, resulting in a denial of service (DoS) condition. |
| A vulnerability in the access control list (ACL) processing on Pseudowire interfaces in the ingress direction of Cisco IOS XR Software could allow an unauthenticated, remote attacker to bypass a configured ACL.
This vulnerability is due to improper assignment of lookup keys to internal interface contexts. An attacker could exploit this vulnerability by attempting to send traffic through an affected device. A successful exploit could allow the attacker to access resources behind the affected device that were supposed to be protected by a configured ACL. |
| A vulnerability in the SSH client feature of Cisco IOS XR Software for Cisco 8000 Series Routers and Cisco Network Convergence System (NCS) 540 Series and 5700 Series Routers could allow an authenticated, local attacker to elevate privileges on an affected device.
This vulnerability is due to insufficient validation of arguments that are included with the SSH client CLI command. An attacker with low-privileged access to an affected device could exploit this vulnerability by issuing a crafted SSH client command to the CLI. A successful exploit could allow the attacker to elevate privileges to root on the affected device. |
| A vulnerability in the Network Configuration Access Control Module (NACM) of Cisco IOS XE Software could allow an authenticated, remote attacker to obtain unauthorized read access to configuration or operational data.
This vulnerability exists because a subtle change in inner API call behavior causes results to be filtered incorrectly. An attacker could exploit this vulnerability by using either NETCONF, RESTCONF, or gRPC Network Management Interface (gNMI) protocols and query data on paths that may have been denied by the NACM configuration. A successful exploit could allow the attacker to access data that should have been restricted according to the NACM configuration.
Note: This vulnerability requires that the attacker obtain the credentials from a valid user with privileges lower than 15, and that NACM was configured to provide restricted read access for that user. |
