| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
net/mlx5e: RX, Fix XDP multi-buf frag counting for legacy RQ
XDP multi-buf programs can modify the layout of the XDP buffer when the
program calls bpf_xdp_pull_data() or bpf_xdp_adjust_tail(). The
referenced commit in the fixes tag corrected the assumption in the mlx5
driver that the XDP buffer layout doesn't change during a program
execution. However, this fix introduced another issue: the dropped
fragments still need to be counted on the driver side to avoid page
fragment reference counting issues.
Such issue can be observed with the
test_xdp_native_adjst_tail_shrnk_data selftest when using a payload of
3600 and shrinking by 256 bytes (an upcoming selftest patch): the last
fragment gets released by the XDP code but doesn't get tracked by the
driver. This results in a negative pp_ref_count during page release and
the following splat:
WARNING: include/net/page_pool/helpers.h:297 at mlx5e_page_release_fragmented.isra.0+0x4a/0x50 [mlx5_core], CPU#12: ip/3137
Modules linked in: [...]
CPU: 12 UID: 0 PID: 3137 Comm: ip Not tainted 6.19.0-rc3+ #12 NONE
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.16.3-0-ga6ed6b701f0a-prebuilt.qemu.org 04/01/2014
RIP: 0010:mlx5e_page_release_fragmented.isra.0+0x4a/0x50 [mlx5_core]
[...]
Call Trace:
<TASK>
mlx5e_dealloc_rx_wqe+0xcb/0x1a0 [mlx5_core]
mlx5e_free_rx_descs+0x7f/0x110 [mlx5_core]
mlx5e_close_rq+0x50/0x60 [mlx5_core]
mlx5e_close_queues+0x36/0x2c0 [mlx5_core]
mlx5e_close_channel+0x1c/0x50 [mlx5_core]
mlx5e_close_channels+0x45/0x80 [mlx5_core]
mlx5e_safe_switch_params+0x1a5/0x230 [mlx5_core]
mlx5e_change_mtu+0xf3/0x2f0 [mlx5_core]
netif_set_mtu_ext+0xf1/0x230
do_setlink.isra.0+0x219/0x1180
rtnl_newlink+0x79f/0xb60
rtnetlink_rcv_msg+0x213/0x3a0
netlink_rcv_skb+0x48/0xf0
netlink_unicast+0x24a/0x350
netlink_sendmsg+0x1ee/0x410
__sock_sendmsg+0x38/0x60
____sys_sendmsg+0x232/0x280
___sys_sendmsg+0x78/0xb0
__sys_sendmsg+0x5f/0xb0
[...]
do_syscall_64+0x57/0xc50
This patch fixes the issue by doing page frag counting on all the
original XDP buffer fragments for all relevant XDP actions (XDP_TX ,
XDP_REDIRECT and XDP_PASS). This is basically reverting to the original
counting before the commit in the fixes tag.
As frag_page is still pointing to the original tail, the nr_frags
parameter to xdp_update_skb_frags_info() needs to be calculated
in a different way to reflect the new nr_frags. |
| In the Linux kernel, the following vulnerability has been resolved:
net: spacemit: Fix error handling in emac_tx_mem_map()
The DMA mappings were leaked on mapping error. Free them with the
existing emac_free_tx_buf() function. |
| In the Linux kernel, the following vulnerability has been resolved:
spi: amlogic: spifc-a4: Fix DMA mapping error handling
Fix three bugs in aml_sfc_dma_buffer_setup() error paths:
1. Unnecessary goto: When the first DMA mapping (sfc->daddr) fails,
nothing needs cleanup. Use direct return instead of goto.
2. Double-unmap bug: When info DMA mapping failed, the code would
unmap sfc->daddr inline, then fall through to out_map_data which
would unmap it again, causing a double-unmap.
3. Wrong unmap size: The out_map_info label used datalen instead of
infolen when unmapping sfc->iaddr, which could lead to incorrect
DMA sync behavior. |
| In the Linux kernel, the following vulnerability has been resolved:
bonding: fix type confusion in bond_setup_by_slave()
kernel BUG at net/core/skbuff.c:2306!
Oops: invalid opcode: 0000 [#1] SMP KASAN NOPTI
RIP: 0010:pskb_expand_head+0xa08/0xfe0 net/core/skbuff.c:2306
RSP: 0018:ffffc90004aff760 EFLAGS: 00010293
RAX: 0000000000000000 RBX: ffff88807e3c8780 RCX: ffffffff89593e0e
RDX: ffff88807b7c4900 RSI: ffffffff89594747 RDI: ffff88807b7c4900
RBP: 0000000000000820 R08: 0000000000000005 R09: 0000000000000000
R10: 00000000961a63e0 R11: 0000000000000000 R12: ffff88807e3c8780
R13: 00000000961a6560 R14: dffffc0000000000 R15: 00000000961a63e0
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007fe1a0ed8df0 CR3: 000000002d816000 CR4: 00000000003526f0
Call Trace:
<TASK>
ipgre_header+0xdd/0x540 net/ipv4/ip_gre.c:900
dev_hard_header include/linux/netdevice.h:3439 [inline]
packet_snd net/packet/af_packet.c:3028 [inline]
packet_sendmsg+0x3ae5/0x53c0 net/packet/af_packet.c:3108
sock_sendmsg_nosec net/socket.c:727 [inline]
__sock_sendmsg net/socket.c:742 [inline]
____sys_sendmsg+0xa54/0xc30 net/socket.c:2592
___sys_sendmsg+0x190/0x1e0 net/socket.c:2646
__sys_sendmsg+0x170/0x220 net/socket.c:2678
do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline]
do_syscall_64+0x106/0xf80 arch/x86/entry/syscall_64.c:94
entry_SYSCALL_64_after_hwframe+0x77/0x7f
RIP: 0033:0x7fe1a0e6c1a9
When a non-Ethernet device (e.g. GRE tunnel) is enslaved to a bond,
bond_setup_by_slave() directly copies the slave's header_ops to the
bond device:
bond_dev->header_ops = slave_dev->header_ops;
This causes a type confusion when dev_hard_header() is later called
on the bond device. Functions like ipgre_header(), ip6gre_header(),all use
netdev_priv(dev) to access their device-specific private data. When
called with the bond device, netdev_priv() returns the bond's private
data (struct bonding) instead of the expected type (e.g. struct
ip_tunnel), leading to garbage values being read and kernel crashes.
Fix this by introducing bond_header_ops with wrapper functions that
delegate to the active slave's header_ops using the slave's own
device. This ensures netdev_priv() in the slave's header functions
always receives the correct device.
The fix is placed in the bonding driver rather than individual device
drivers, as the root cause is bond blindly inheriting header_ops from
the slave without considering that these callbacks expect a specific
netdev_priv() layout.
The type confusion can be observed by adding a printk in
ipgre_header() and running the following commands:
ip link add dummy0 type dummy
ip addr add 10.0.0.1/24 dev dummy0
ip link set dummy0 up
ip link add gre1 type gre local 10.0.0.1
ip link add bond1 type bond mode active-backup
ip link set gre1 master bond1
ip link set gre1 up
ip link set bond1 up
ip addr add fe80::1/64 dev bond1 |
| In the Linux kernel, the following vulnerability has been resolved:
netfilter: nf_tables: Fix for duplicate device in netdev hooks
When handling NETDEV_REGISTER notification, duplicate device
registration must be avoided since the device may have been added by
nft_netdev_hook_alloc() already when creating the hook. |
| In the Linux kernel, the following vulnerability has been resolved:
netfilter: x_tables: guard option walkers against 1-byte tail reads
When the last byte of options is a non-single-byte option kind, walkers
that advance with i += op[i + 1] ? : 1 can read op[i + 1] past the end
of the option area.
Add an explicit i == optlen - 1 check before dereferencing op[i + 1]
in xt_tcpudp and xt_dccp option walkers. |
| In the Linux kernel, the following vulnerability has been resolved:
iavf: fix PTP use-after-free during reset
Commit 7c01dbfc8a1c5f ("iavf: periodically cache PHC time") introduced a
worker to cache PHC time, but failed to stop it during reset or disable.
This creates a race condition where `iavf_reset_task()` or
`iavf_disable_vf()` free adapter resources (AQ) while the worker is still
running. If the worker triggers `iavf_queue_ptp_cmd()` during teardown, it
accesses freed memory/locks, leading to a crash.
Fix this by calling `iavf_ptp_release()` before tearing down the adapter.
This ensures `ptp_clock_unregister()` synchronously cancels the worker and
cleans up the chardev before the backing resources are destroyed. |
| In the Linux kernel, the following vulnerability has been resolved:
io_uring: fix physical SQE bounds check for SQE_MIXED 128-byte ops
When IORING_SETUP_SQE_MIXED is used without IORING_SETUP_NO_SQARRAY,
the boundary check for 128-byte SQE operations in io_init_req()
validated the logical SQ head position rather than the physical SQE
index.
The existing check:
!(ctx->cached_sq_head & (ctx->sq_entries - 1))
ensures the logical position isn't at the end of the ring, which is
correct for NO_SQARRAY rings where physical == logical. However, when
sq_array is present, an unprivileged user can remap any logical
position to an arbitrary physical index via sq_array. Setting
sq_array[N] = sq_entries - 1 places a 128-byte operation at the last
physical SQE slot, causing the 128-byte memcpy in
io_uring_cmd_sqe_copy() to read 64 bytes past the end of the SQE
array.
Replace the cached_sq_head alignment check with a direct validation
of the physical SQE index, which correctly handles both sq_array and
NO_SQARRAY cases. |
| In the Linux kernel, the following vulnerability has been resolved:
net: bonding: Fix nd_tbl NULL dereference when IPv6 is disabled
When booting with the 'ipv6.disable=1' parameter, the nd_tbl is never
initialized because inet6_init() exits before ndisc_init() is called
which initializes it. If bonding ARP/NS validation is enabled, an IPv6
NS/NA packet received on a slave can reach bond_validate_na(), which
calls bond_has_this_ip6(). That path calls ipv6_chk_addr() and can
crash in __ipv6_chk_addr_and_flags().
BUG: kernel NULL pointer dereference, address: 00000000000005d8
Oops: Oops: 0000 [#1] SMP NOPTI
RIP: 0010:__ipv6_chk_addr_and_flags+0x69/0x170
Call Trace:
<IRQ>
ipv6_chk_addr+0x1f/0x30
bond_validate_na+0x12e/0x1d0 [bonding]
? __pfx_bond_handle_frame+0x10/0x10 [bonding]
bond_rcv_validate+0x1a0/0x450 [bonding]
bond_handle_frame+0x5e/0x290 [bonding]
? srso_alias_return_thunk+0x5/0xfbef5
__netif_receive_skb_core.constprop.0+0x3e8/0xe50
? srso_alias_return_thunk+0x5/0xfbef5
? update_cfs_rq_load_avg+0x1a/0x240
? srso_alias_return_thunk+0x5/0xfbef5
? __enqueue_entity+0x5e/0x240
__netif_receive_skb_one_core+0x39/0xa0
process_backlog+0x9c/0x150
__napi_poll+0x30/0x200
? srso_alias_return_thunk+0x5/0xfbef5
net_rx_action+0x338/0x3b0
handle_softirqs+0xc9/0x2a0
do_softirq+0x42/0x60
</IRQ>
<TASK>
__local_bh_enable_ip+0x62/0x70
__dev_queue_xmit+0x2d3/0x1000
? srso_alias_return_thunk+0x5/0xfbef5
? srso_alias_return_thunk+0x5/0xfbef5
? packet_parse_headers+0x10a/0x1a0
packet_sendmsg+0x10da/0x1700
? kick_pool+0x5f/0x140
? srso_alias_return_thunk+0x5/0xfbef5
? __queue_work+0x12d/0x4f0
__sys_sendto+0x1f3/0x220
__x64_sys_sendto+0x24/0x30
do_syscall_64+0x101/0xf80
? exc_page_fault+0x6e/0x170
? srso_alias_return_thunk+0x5/0xfbef5
entry_SYSCALL_64_after_hwframe+0x77/0x7f
</TASK>
Fix this by checking ipv6_mod_enabled() before dispatching IPv6 packets to
bond_na_rcv(). If IPv6 is disabled, return early from bond_rcv_validate()
and avoid the path to ipv6_chk_addr(). |
| In the Linux kernel, the following vulnerability has been resolved:
sched_ext: Remove redundant css_put() in scx_cgroup_init()
The iterator css_for_each_descendant_pre() walks the cgroup hierarchy
under cgroup_lock(). It does not increment the reference counts on
yielded css structs.
According to the cgroup documentation, css_put() should only be used
to release a reference obtained via css_get() or css_tryget_online().
Since the iterator does not use either of these to acquire a reference,
calling css_put() in the error path of scx_cgroup_init() causes a
refcount underflow.
Remove the unbalanced css_put() to prevent a potential Use-After-Free
(UAF) vulnerability. |
| In the Linux kernel, the following vulnerability has been resolved:
ALSA: pcm: fix use-after-free on linked stream runtime in snd_pcm_drain()
In the drain loop, the local variable 'runtime' is reassigned to a
linked stream's runtime (runtime = s->runtime at line 2157). After
releasing the stream lock at line 2169, the code accesses
runtime->no_period_wakeup, runtime->rate, and runtime->buffer_size
(lines 2170-2178) — all referencing the linked stream's runtime without
any lock or refcount protecting its lifetime.
A concurrent close() on the linked stream's fd triggers
snd_pcm_release_substream() → snd_pcm_drop() → pcm_release_private()
→ snd_pcm_unlink() → snd_pcm_detach_substream() → kfree(runtime).
No synchronization prevents kfree(runtime) from completing while the
drain path dereferences the stale pointer.
Fix by caching the needed runtime fields (no_period_wakeup, rate,
buffer_size) into local variables while still holding the stream lock,
and using the cached values after the lock is released. |
| In the Linux kernel, the following vulnerability has been resolved:
rust_binder: check ownership before using vma
When installing missing pages (or zapping them), Rust Binder will look
up the vma in the mm by address, and then call vm_insert_page (or
zap_page_range_single). However, if the vma is closed and replaced with
a different vma at the same address, this can lead to Rust Binder
installing pages into the wrong vma.
By installing the page into a writable vma, it becomes possible to write
to your own binder pages, which are normally read-only. Although you're
not supposed to be able to write to those pages, the intent behind the
design of Rust Binder is that even if you get that ability, it should not
lead to anything bad. Unfortunately, due to another bug, that is not the
case.
To fix this, store a pointer in vm_private_data and check that the vma
returned by vma_lookup() has the right vm_ops and vm_private_data before
trying to use the vma. This should ensure that Rust Binder will refuse
to interact with any other VMA. The plan is to introduce more vma
abstractions to avoid this unsafe access to vm_ops and vm_private_data,
but for now let's start with the simplest possible fix.
C Binder performs the same check in a slightly different way: it
provides a vm_ops->close that sets a boolean to true, then checks that
boolean after calling vma_lookup(), but this is more fragile
than the solution in this patch. (We probably still want to do both, but
the vm_ops->close callback will be added later as part of the follow-up
vma API changes.)
It's still possible to remap the vma so that pages appear in the right
vma, but at the wrong offset, but this is a separate issue and will be
fixed when Rust Binder gets a vm_ops->close callback. |
| In the Linux kernel, the following vulnerability has been resolved:
scsi: qla2xxx: Completely fix fcport double free
In qla24xx_els_dcmd_iocb() sp->free is set to qla2x00_els_dcmd_sp_free().
When an error happens, this function is called by qla2x00_sp_release(),
when kref_put() releases the first and the last reference.
qla2x00_els_dcmd_sp_free() frees fcport by calling qla2x00_free_fcport().
Doing it one more time after kref_put() is a bad idea. |
| In the Linux kernel, the following vulnerability has been resolved:
ceph: add a bunch of missing ceph_path_info initializers
ceph_mdsc_build_path() must be called with a zero-initialized
ceph_path_info parameter, or else the following
ceph_mdsc_free_path_info() may crash.
Example crash (on Linux 6.18.12):
virt_to_cache: Object is not a Slab page!
WARNING: CPU: 184 PID: 2871736 at mm/slub.c:6732 kmem_cache_free+0x316/0x400
[...]
Call Trace:
[...]
ceph_open+0x13d/0x3e0
do_dentry_open+0x134/0x480
vfs_open+0x2a/0xe0
path_openat+0x9a3/0x1160
[...]
cache_from_obj: Wrong slab cache. names_cache but object is from ceph_inode_info
WARNING: CPU: 184 PID: 2871736 at mm/slub.c:6746 kmem_cache_free+0x2dd/0x400
[...]
kernel BUG at mm/slub.c:634!
Oops: invalid opcode: 0000 [#1] SMP NOPTI
RIP: 0010:__slab_free+0x1a4/0x350
Some of the ceph_mdsc_build_path() callers had initializers, but
others had not, even though they were all added by commit 15f519e9f883
("ceph: fix race condition validating r_parent before applying state").
The ones without initializer are suspectible to random crashes. (I can
imagine it could even be possible to exploit this bug to elevate
privileges.)
Unfortunately, these Ceph functions are undocumented and its semantics
can only be derived from the code. I see that ceph_mdsc_build_path()
initializes the structure only on success, but not on error.
Calling ceph_mdsc_free_path_info() after a failed
ceph_mdsc_build_path() call does not even make sense, but that's what
all callers do, and for it to be safe, the structure must be
zero-initialized. The least intrusive approach to fix this is
therefore to add initializers everywhere. |
| In the Linux kernel, the following vulnerability has been resolved:
libceph: Fix potential out-of-bounds access in ceph_handle_auth_reply()
This patch fixes an out-of-bounds access in ceph_handle_auth_reply()
that can be triggered by a message of type CEPH_MSG_AUTH_REPLY. In
ceph_handle_auth_reply(), the value of the payload_len field of such a
message is stored in a variable of type int. A value greater than
INT_MAX leads to an integer overflow and is interpreted as a negative
value. This leads to decrementing the pointer address by this value and
subsequently accessing it because ceph_decode_need() only checks that
the memory access does not exceed the end address of the allocation.
This patch fixes the issue by changing the data type of payload_len to
u32. Additionally, the data type of result_msg_len is changed to u32,
as it is also a variable holding a non-negative length.
Also, an additional layer of sanity checks is introduced, ensuring that
directly after reading it from the message, payload_len and
result_msg_len are not greater than the overall segment length.
BUG: KASAN: slab-out-of-bounds in ceph_handle_auth_reply+0x642/0x7a0 [libceph]
Read of size 4 at addr ffff88811404df14 by task kworker/20:1/262
CPU: 20 UID: 0 PID: 262 Comm: kworker/20:1 Not tainted 6.19.2 #5 PREEMPT(voluntary)
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.3-debian-1.16.3-2 04/01/2014
Workqueue: ceph-msgr ceph_con_workfn [libceph]
Call Trace:
<TASK>
dump_stack_lvl+0x76/0xa0
print_report+0xd1/0x620
? __pfx__raw_spin_lock_irqsave+0x10/0x10
? kasan_complete_mode_report_info+0x72/0x210
kasan_report+0xe7/0x130
? ceph_handle_auth_reply+0x642/0x7a0 [libceph]
? ceph_handle_auth_reply+0x642/0x7a0 [libceph]
__asan_report_load_n_noabort+0xf/0x20
ceph_handle_auth_reply+0x642/0x7a0 [libceph]
mon_dispatch+0x973/0x23d0 [libceph]
? apparmor_socket_recvmsg+0x6b/0xa0
? __pfx_mon_dispatch+0x10/0x10 [libceph]
? __kasan_check_write+0x14/0x30i
? mutex_unlock+0x7f/0xd0
? __pfx_mutex_unlock+0x10/0x10
? __pfx_do_recvmsg+0x10/0x10 [libceph]
ceph_con_process_message+0x1f1/0x650 [libceph]
process_message+0x1e/0x450 [libceph]
ceph_con_v2_try_read+0x2e48/0x6c80 [libceph]
? __pfx_ceph_con_v2_try_read+0x10/0x10 [libceph]
? save_fpregs_to_fpstate+0xb0/0x230
? raw_spin_rq_unlock+0x17/0xa0
? finish_task_switch.isra.0+0x13b/0x760
? __switch_to+0x385/0xda0
? __kasan_check_write+0x14/0x30
? mutex_lock+0x8d/0xe0
? __pfx_mutex_lock+0x10/0x10
ceph_con_workfn+0x248/0x10c0 [libceph]
process_one_work+0x629/0xf80
? __kasan_check_write+0x14/0x30
worker_thread+0x87f/0x1570
? __pfx__raw_spin_lock_irqsave+0x10/0x10
? __pfx_try_to_wake_up+0x10/0x10
? kasan_print_address_stack_frame+0x1f7/0x280
? __pfx_worker_thread+0x10/0x10
kthread+0x396/0x830
? __pfx__raw_spin_lock_irq+0x10/0x10
? __pfx_kthread+0x10/0x10
? __kasan_check_write+0x14/0x30
? recalc_sigpending+0x180/0x210
? __pfx_kthread+0x10/0x10
ret_from_fork+0x3f7/0x610
? __pfx_ret_from_fork+0x10/0x10
? __switch_to+0x385/0xda0
? __pfx_kthread+0x10/0x10
ret_from_fork_asm+0x1a/0x30
</TASK>
[ idryomov: replace if statements with ceph_decode_need() for
payload_len and result_msg_len ] |
| In the Linux kernel, the following vulnerability has been resolved:
libceph: prevent potential out-of-bounds reads in process_message_header()
If the message frame is (maliciously) corrupted in a way that the
length of the control segment ends up being less than the size of the
message header or a different frame is made to look like a message
frame, out-of-bounds reads may ensue in process_message_header().
Perform an explicit bounds check before decoding the message header. |
| In the Linux kernel, the following vulnerability has been resolved:
libceph: Use u32 for non-negative values in ceph_monmap_decode()
This patch fixes unnecessary implicit conversions that change signedness
of blob_len and num_mon in ceph_monmap_decode().
Currently blob_len and num_mon are (signed) int variables. They are used
to hold values that are always non-negative and get assigned in
ceph_decode_32_safe(), which is meant to assign u32 values. Both
variables are subsequently used as unsigned values, and the value of
num_mon is further assigned to monmap->num_mon, which is of type u32.
Therefore, both variables should be of type u32. This is especially
relevant for num_mon. If the value read from the incoming message is
very large, it is interpreted as a negative value, and the check for
num_mon > CEPH_MAX_MON does not catch it. This leads to the attempt to
allocate a very large chunk of memory for monmap, which will most likely
fail. In this case, an unnecessary attempt to allocate memory is
performed, and -ENOMEM is returned instead of -EINVAL. |
| In the Linux kernel, the following vulnerability has been resolved:
nsfs: tighten permission checks for ns iteration ioctls
Even privileged services should not necessarily be able to see other
privileged service's namespaces so they can't leak information to each
other. Use may_see_all_namespaces() helper that centralizes this policy
until the nstree adapts. |
| In the Linux kernel, the following vulnerability has been resolved:
kthread: consolidate kthread exit paths to prevent use-after-free
Guillaume reported crashes via corrupted RCU callback function pointers
during KUnit testing. The crash was traced back to the pidfs rhashtable
conversion which replaced the 24-byte rb_node with an 8-byte rhash_head
in struct pid, shrinking it from 160 to 144 bytes.
struct kthread (without CONFIG_BLK_CGROUP) is also 144 bytes. With
CONFIG_SLAB_MERGE_DEFAULT and SLAB_HWCACHE_ALIGN both round up to
192 bytes and share the same slab cache. struct pid.rcu.func and
struct kthread.affinity_node both sit at offset 0x78.
When a kthread exits via make_task_dead() it bypasses kthread_exit() and
misses the affinity_node cleanup. free_kthread_struct() frees the memory
while the node is still linked into the global kthread_affinity_list. A
subsequent list_del() by another kthread writes through dangling list
pointers into the freed and reused memory, corrupting the pid's
rcu.func pointer.
Instead of patching free_kthread_struct() to handle the missed cleanup,
consolidate all kthread exit paths. Turn kthread_exit() into a macro
that calls do_exit() and add kthread_do_exit() which is called from
do_exit() for any task with PF_KTHREAD set. This guarantees that
kthread-specific cleanup always happens regardless of the exit path -
make_task_dead(), direct do_exit(), or kthread_exit().
Replace __to_kthread() with a new tsk_is_kthread() accessor in the
public header. Export do_exit() since module code using the
kthread_exit() macro now needs it directly. |
| In the Linux kernel, the following vulnerability has been resolved:
nsfs: tighten permission checks for handle opening
Even privileged services should not necessarily be able to see other
privileged service's namespaces so they can't leak information to each
other. Use may_see_all_namespaces() helper that centralizes this policy
until the nstree adapts. |
