| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
fou: Fix use-after-free in fou_create()
fou_create() publishes struct fou through sk_user_data before adding the
new FOU port to the per-netns list. If fou_add_to_port_list() fails,
the error path frees fou while it is still reachable through
sk_user_data. A concurrent receive can then dereference the freed
object in fou_from_sock().
This ordering issue was previously noted in the linked discussion.
The failure is reachable when local port 0 is requested. Each socket
binds to a different ephemeral port, but fou_cfg_cmp() compares the
requested port 0 and reports -EALREADY once an entry already exists.
Release the tunnel socket before freeing fou so sk_user_data is cleared
first, and defer reclamation with kfree_rcu() to protect concurrent RCU
readers. This matches the lifetime handling in fou_release(). |
| In the Linux kernel, the following vulnerability has been resolved:
netfs: Fix partial invalidation of streaming-write folio
In netfs_invalidate_folio(), if the region of a partial invalidation
overlaps the front (but not all) of a dirty write cached in a streaming
write page (dirty, but not uptodate, with the dirty region tracked by a
netfs_folio struct), the function modifies the dirty region - but
incorrectly as it moves the region forward by setting the start to the
start, not the end, of the invalidation region.
Fix this by setting finfo->dirty_offset to the end of the invalidation
region (iend). |
| In the Linux kernel, the following vulnerability has been resolved:
apparmor: fix uninitialised pointer passed to audit_log_untrustedstring()
Commit 4a134723f9f1 ("apparmor: move check for aa_null file to cover all cases")
intrdouced a small bug, where path_name() may pass a potentially uninitialized
*name to aa_audit_file() if the path->dentry had been replaced with
aa_null.dentry earlier on. This can lead to page fault like one observed on
7.0.2 openSUSE Tumbleweed kernel:
[51692.242756] [ T24690] BUG: unable to handle page fault for address: 0000000f00000003
[51692.242762] [ T24690] #PF: supervisor read access in kernel mode
[51692.242763] [ T24690] #PF: error_code(0x0000) - not-present page
[51692.242765] [ T24690] PGD 0 P4D 0
[51692.242768] [ T24690] Oops: Oops: 0000 [#1] SMP NOPTI
[51692.242772] [ T24690] CPU: 3 UID: 1020 PID: 24690 Comm: snap-confine Tainted: G O 7.0.2-1-default #1 PREEMPT(full) openSUSE Tumbleweed ab90b4c9940707f9cafa19bdad80b2cec52dbe51
[51692.242775] [ T24690] Tainted: [O]=OOT_MODULE
[51692.242777] [ T24690] Hardware name: Framework Laptop 13 (AMD Ryzen 7040Series)/FRANMDCP05, BIOS 03.18 01/08/2026
[51692.242778] [ T24690] RIP: 0010:strlen+0x4/0x30
[51692.242783] [ T24690] Code: f7 75 ec 31 c0 e9 17 9f 00 ff 48 89 f8 e9 0f 9f 00 ff 0f 1f 40 00 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 f3 0f 1e fa <80> 3f 00 74 18 48 89 f8 0f 1f 40 00 48 83 c0 01 80 38 00 75 f7 48
[51692.242785] [ T24690] RSP: 0018:ffffd015eb1e3608 EFLAGS: 00010282
[51692.242787] [ T24690] RAX: 0000000000000000 RBX: ffff89796198a360 RCX: 0000000000000000
[51692.242788] [ T24690] RDX: 00000000000000d1 RSI: 0000000f00000003 RDI: 0000000f00000003
[51692.242790] [ T24690] RBP: ffffffffb7ede090 R08: 00000000000005f5 R09: 0000000000000000
[51692.242791] [ T24690] R10: 0000000000000000 R11: 0000000000000000 R12: ffffd015eb1e3700
[51692.242792] [ T24690] R13: ffff8977a22bc380 R14: ffffffffb7ec5190 R15: ffff8977a0c8aa80
[51692.242794] [ T24690] FS: 0000000000000000(0000) GS:ffff897f640d8000(0000) knlGS:0000000000000000
[51692.242796] [ T24690] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[51692.242797] [ T24690] CR2: 0000000f00000003 CR3: 00000006ad15f000 CR4: 0000000000f50ef0
[51692.242799] [ T24690] PKRU: 55555554
[51692.242800] [ T24690] Call Trace:
[51692.242802] [ T24690] <TASK>
[51692.242804] [ T24690] audit_log_untrustedstring+0x1d/0x40
[51692.242811] [ T24690] common_lsm_audit+0x71/0x1d0
[51692.242816] [ T24690] aa_audit+0x5a/0x170
[51692.242819] [ T24690] aa_audit_file+0x18a/0x1b0
[51692.242825] [ T24690] path_name+0xd2/0x100
[51692.242829] [ T24690] profile_path_perm.part.0+0x58/0xb0
[51692.242832] [ T24690] aa_path_perm+0xef/0x150
[51692.242837] [ T24690] apparmor_file_open+0x153/0x2e0
[51692.242840] [ T24690] security_file_open+0x46/0xd0
[51692.242844] [ T24690] do_dentry_open+0xe9/0x4d0
[51692.242848] [ T24690] vfs_open+0x30/0x100
While here, initialise variables which are passed down to path_name(). |
| Inclusion of functionality from untrusted control sphere in Visual Studio Code - Python extension allows an unauthorized attacker to bypass a security feature locally. |
| In the Linux kernel, the following vulnerability has been resolved:
netfs: Fix potential for tearing in ->remote_i_size and ->zero_point
Fix potential tearing in using ->remote_i_size and ->zero_point by copying
i_size_read() and i_size_write() and using the same seqcount as for i_size.
We need to make sure that netfslib and the filesystems that use it always
hold i_lock whilst updating any of the sizes to prevent i_size_seqcount
from getting corrupted. |
| Kiota is an OpenAPI based HTTP Client code generator. Prior to 1.29.1 and 1.32.5, Kiota resolved OpenAPI $ref values by fetching remote http(s) URLs and reading local absolute or out-of-tree file paths, allowing `kiota generate` on an attacker-controlled or attacker-influenced description to perform build-time SSRF, remote file inclusion, and local file inclusion by inlining external schemas such as REMOTE_KIOTA_PROP or Leaked into generated clients. This issue is fixed in version 1.29.1 and 1.32.5 by AllowedExternalOriginsStreamLoader and the --allowed-external-origins option. |
| Kiota is an OpenAPI based HTTP Client code generator. Prior to 1.29.1 and 1.32.5, `kiota info` read x-ms-kiota-info.languagesInformation.<language>.dependencyInstallCommand plus dependency name and version values from an OpenAPI description and presented the spec-supplied command as Kiota's recommended install command, allowing an attacker-controlled or compromised description to cause command injection when the suggested command was run manually or through the Kiota VS Code extension's kiota info --json dependency-install flow. This issue is fixed in version 1.29.1 and 1.32.5. |
| Kiota is an OpenAPI based HTTP Client code generator. Prior to 1.29.1 and 1.32.5, `kiota plugin add` and `kiota plugin generate` (with `-t APIPlugin`) emitted attacker-controlled static_template.file values from x-ai-adaptive-card and x-ai-capabilities into generated Microsoft 365 Copilot and Teams plugin manifests without path validation, allowing ../, absolute, rooted, UNC, Windows drive, or URI paths in response_semantics.static_template.file to cause path traversal or out-of-package file inclusion when the generated plugin was deployed. This issue is fixed in version 1.29.1 and 1.32.5. |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: hci_conn: hold conn reference in abort_conn_sync()
There is theoretical UAF if the conn is freed while the hci_sync task is
running.
Hold refcount to avoid that. |
| In the Linux kernel, the following vulnerability has been resolved:
netfilter: nf_tables: make nft_object rhltable per table
The nft_object rhltable is global, this allows for accessing objects
that are being dismangled from lookup path by other existing netns.
Given the nft_obj_destroy() releases the object inmediately, this might
lead to use-after-free of these objects that are being released.
Make the existing rhltable per table to address this issue to deal with
with the nft_rcv_nl_event() path too.
Update nft_obj_lookup() to take the table as non-const, otherwise,
compiler complains when passing the objname_ht to rhltable_lookup(). |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: mac80211: fix tid_tx use-after-free on BA session stop
ieee80211_stop_tx_ba_cb() hands tid_tx to kfree_rcu() through
ieee80211_remove_tid_tx(), and then reads tid_tx->ndp after dropping
sta->lock:
ieee80211_remove_tid_tx(sta, tid); /* kfree_rcu(tid_tx, rcu_head) */
...
spin_unlock_bh(&sta->lock);
if (start_txq)
ieee80211_agg_start_txq(sta, tid, false);
if (send_delba)
ieee80211_send_delba(..., tid_tx->ndp);
That read is not covered by an RCU read-side critical section, and it runs
in preemptible process context: both callers hold the wiphy mutex, reaching
it either from the ieee80211_ba_session_work() wiphy work or from
ieee80211_sta_tear_down_BA_sessions() during station teardown.
Softirqs can run in that window too, both from the local_bh_enable() that
ends ieee80211_agg_start_txq() and from any interrupt exit, so the RCU
callback can free tid_tx before the read.
Driving the function from a test module with the grace period forced into
that window, KASAN reports the read, and the free arrives on the ordinary
RCU softirq path:
BUG: KASAN: slab-use-after-free in ieee80211_stop_tx_ba_cb+0x3cd/0x400
Read of size 1 at addr ffff888002b9f52e by task kworker/0:1/10
[...]
Freed by task 57:
__kasan_slab_free+0x47/0x70
__rcu_free_sheaf_prepare+0x70/0x250
rcu_free_sheaf_nobarn+0x18/0x40
rcu_core+0x426/0x1310
handle_softirqs+0x144/0x590
__irq_exit_rcu+0xea/0x150
irq_exit_rcu+0x9/0x20
sysvec_apic_timer_interrupt+0x6b/0x80
asm_sysvec_apic_timer_interrupt+0x1a/0x20
send_delba is only set when tx_stop is set, which happens for
AGG_STOP_LOCAL_REQUEST alone, so this is reached on local teardown -
session idle timeout, PTK rekey, suspend, HW reconfig - and not from a
peer's DELBA.
Read ndp into a local before the session is freed, while sta->lock is still
held. tid_tx->ndp has a single writer, in
ieee80211_tx_ba_session_handle_start(), which cannot run concurrently here:
both paths are serialised by the wiphy mutex, and the session is already
marked HT_AGG_STATE_STOPPING at this point. tid_tx->ndp is also the only
tid_tx dereference left after ieee80211_remove_tid_tx() in this function.
[move/change the comment a bit to be more general not just on ndp,
initialize ndp directly] |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: mt76: use kfree_rcu for offchannel link in mt76_put_vif_phy_link
mt76_put_vif_phy_link() frees the offchannel mlink with plain kfree()
after rcu_assign_pointer(NULL). However, rcu_assign_pointer only prevents
future RCU readers from obtaining the pointer -- it does not wait for
existing readers that already hold it via rcu_dereference.
The TX datapath (e.g. mt7996_mac_write_txwi) dereferences mlink->wcid
and mlink->idx under rcu_read_lock. If a TX softirq obtained the pointer
via rcu_dereference just before the NULL assignment, it will dereference
freed memory after the kfree.
struct mt76_vif_link already contains an rcu_head field that is unused at
this free site -- a developer oversight, since the adjacent
kfree_rcu_mightsleep call for rx_sc in the same function shows the
pattern was understood.
Replace kfree(mlink) with kfree_rcu(mlink, rcu_head). |
| In the Linux kernel, the following vulnerability has been resolved:
iommu/vt-d: Fix RB-tree corruption in probe error path
The info->node RB-tree member is zero-initialized via kzalloc. If
a device does not support ATS, the device_rbtree_insert() call is
skipped. If a subsequent probe step fails, the error path jumps to
device_rbtree_remove(), which misinterprets the zeroed node as
a tree root and corrupts the device RB-tree.
Fix this by explicitly initializing the RB-node as empty using
RB_CLEAR_NODE() during initialization and guarding the removal with
RB_EMPTY_NODE(). |
| In the Linux kernel, the following vulnerability has been resolved:
ALSA: timer: Clear SNDRV_TIMER_IFLG_DEAD once the close completes
snd_timer_close_locked() marks an instance with SNDRV_TIMER_IFLG_DEAD
and returns early when the flag is already set, but the flag is never
cleared again. A completed close ends in remove_slave_links(), which
leaves timeri->timer NULL, so a second close is already harmless through
the timer == NULL path; the early return can only be reached by an
instance that was opened again in between. For such an instance the
close unlinks nothing, so snd_timer_instance_free() frees an object that
is still on timer->open_list_head, still on snd_timer_master_list if it
was opened with a slave key, still owns any adopted slaves, and still
holds its timer and module references.
snd_seq_timer_open() reopens an instance exactly like that: it retries
its fallback open on the same object after a failure that has already
run snd_timer_close_locked() internally. An unprivileged user with
access to /dev/snd/timer and /dev/snd/seq can force that failure, since
snd_timer_check_master() returns -EBUSY when a pending slave matches the
new master's (slave_class, slave_id) key and the target timer has
reached max_instances, and SNDRV_TIMER_IOCTL_SELECT with dev_class =
SNDRV_TIMER_CLASS_SLAVE keeps the caller-supplied dev_sclass, so a
sequencer queue's key can be forged. The freed instance is afterwards
dereferenced by any further snd_timer_open() on that timer, by
snd_timer_check_slave(), and by /proc/asound/timers, which faults on the
stale ti->owner pointer.
The flag only has to be visible while the close is in progress, which is
all its other users need. Clear it in remove_slave_links(), under the
same timer->lock that sets it, once the instance is off every list. |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: hci_sync: hold conn in hci_connect_pa_sync() callback
There is theoretical UAF if the conn is freed while the hci_sync task is
running.
Hold refcount to avoid that. |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: ISO: clear iso_data always when detaching conn from hcon
When setting conn->hcon = NULL, also conn->hcon->iso_data = NULL is
necessary, otherwise later iso_conn_free() will UAF.
Fix clearing of iso_data in iso_sock_disconn()
Fixes KASAN: slab-use-after-free in iso_conn_hold_unless_zero on
iso_sock_release() followed by hci_abort_conn_sync(). |
| Use after free in TabStrip in Google Chrome on Mac prior to 151.0.7922.137 allowed a remote attacker who had compromised the renderer process to potentially perform a sandbox escape via a crafted HTML page. (Chromium security severity: High) |
| In Eclipse Theia versions up to and including 1.69.0, opening a folder starts source control integration without requiring the user to trust the folder first. This affects applications built on Theia that include the git integration, such as the Theia IDE. Both Theia's own `@theia/git` extension and the builtin VS Code `git` extension run git commands such as `git status` as soon as a repository is detected. Since git honors repository-local configuration, a folder containing an attacker-controlled `.git/config` with `core.fsmonitor` (or a comparable hook-like setting) causes the configured command to be executed. The configuration can be delivered by burying a bare repository inside a regular repository (OVE-20210718-0001), so cloning an attacker-supplied repository and opening it in a Theia-based application is sufficient to execute arbitrary commands with the privileges of the user, without any confirmation prompt.
As of 1.70.0, plugins that declare `capabilities.untrustedWorkspaces.supported: false`, which includes the builtin git extension, are no longer loaded or activated in an untrusted workspace, and the deprecated `@theia/git` extension has been removed, so no git command is executed against an untrusted folder. |
| In the Linux kernel, the following vulnerability has been resolved:
iommu/arm-smmu-v3-iommufd: Require exactly one Stream ID for a vDEVICE
arm_vsmmu_vsid_to_sid() maps a guest's vSID to a single physical Stream ID
taken from master->streams[0], assuming a device has exactly one stream. A
device with several streams gets only its first one mapped, so a guest vSID
invalidation cannot reach the others' ATC and IOTLB entries; a device with
none makes master->streams a ZERO_SIZE_PTR, read out of bounds.
Add an arm_vsmmu_vdevice_init() op to reject the vDEVICE with -EOPNOTSUPP
when master->num_streams is not one, rather than mapping it silently. |
| Use after free in Blink in Google Chrome prior to 151.0.7922.137 allowed a remote attacker to execute arbitrary code inside a sandbox via a crafted HTML page. (Chromium security severity: High) |
