| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
coresight: holding cscfg_csdev_lock while removing cscfg from csdev
There'll be possible race scenario for coresight config:
CPU0 CPU1
(perf enable) load module
cscfg_load_config_sets()
activate config. // sysfs
(sys_active_cnt == 1)
...
cscfg_csdev_enable_active_config()
lock(csdev->cscfg_csdev_lock)
deactivate config // sysfs
(sys_activec_cnt == 0)
cscfg_unload_config_sets()
<iterating config_csdev_list> cscfg_remove_owned_csdev_configs()
// here load config activate by CPU1
unlock(csdev->cscfg_csdev_lock)
iterating config_csdev_list could be raced with config_csdev_list's
entry delete.
To resolve this race , hold csdev->cscfg_csdev_lock() while
cscfg_remove_owned_csdev_configs() |
| In the Linux kernel, the following vulnerability has been resolved:
dm: limit swapping tables for devices with zone write plugs
dm_revalidate_zones() only allowed new or previously unzoned devices to
call blk_revalidate_disk_zones(). If the device was already zoned,
disk->nr_zones would always equal md->nr_zones, so dm_revalidate_zones()
returned without doing any work. This would make the zoned settings for
the device not match the new table. If the device had zone write plug
resources, it could run into errors like bdev_zone_is_seq() reading
invalid memory because disk->conv_zones_bitmap was the wrong size.
If the device doesn't have any zone write plug resources, calling
blk_revalidate_disk_zones() will always correctly update device. If
blk_revalidate_disk_zones() fails, it can still overwrite or clear the
current disk->nr_zones value. In this case, DM must restore the previous
value of disk->nr_zones, so that the zoned settings will continue to
match the previous value that it fell back to.
If the device already has zone write plug resources,
blk_revalidate_disk_zones() will not correctly update them, if it is
called for arbitrary zoned device changes. Since there is not much need
for this ability, the easiest solution is to disallow any table reloads
that change the zoned settings, for devices that already have zone plug
resources. Specifically, if a device already has zone plug resources
allocated, it can only switch to another zoned table that also emulates
zone append. Also, it cannot change the device size or the zone size. A
device can switch to an error target. |
| A flaw was found in the Poppler's Pdfinfo utility. This issue occurs when using -dests parameter with pdfinfo utility. By using certain malformed input files, an attacker could cause the utility to crash, leading to a denial of service. |
| A flaw was found in the 389 Directory Server. This flaw allows an unauthenticated user to cause a systematic server crash while sending a specific extended search request, leading to a denial of service. |
| In the Linux kernel, the following vulnerability has been resolved:
perf: arm-ni: Unregister PMUs on probe failure
When a resource allocation fails in one clock domain of an NI device,
we need to properly roll back all previously registered perf PMUs in
other clock domains of the same device.
Otherwise, it can lead to kernel panics.
Calling arm_ni_init+0x0/0xff8 [arm_ni] @ 2374
arm-ni ARMHCB70:00: Failed to request PMU region 0x1f3c13000
arm-ni ARMHCB70:00: probe with driver arm-ni failed with error -16
list_add corruption: next->prev should be prev (fffffd01e9698a18),
but was 0000000000000000. (next=ffff10001a0decc8).
pstate: 6340009 (nZCv daif +PAN -UAO +TCO +DIT -SSBS BTYPE=--)
pc : list_add_valid_or_report+0x7c/0xb8
lr : list_add_valid_or_report+0x7c/0xb8
Call trace:
__list_add_valid_or_report+0x7c/0xb8
perf_pmu_register+0x22c/0x3a0
arm_ni_probe+0x554/0x70c [arm_ni]
platform_probe+0x70/0xe8
really_probe+0xc6/0x4d8
driver_probe_device+0x48/0x170
__driver_attach+0x8e/0x1c0
bus_for_each_dev+0x64/0xf0
driver_add+0x138/0x260
bus_add_driver+0x68/0x138
__platform_driver_register+0x2c/0x40
arm_ni_init+0x14/0x2a [arm_ni]
do_init_module+0x36/0x298
---[ end trace 0000000000000000 ]---
Kernel panic - not syncing: Oops - BUG: Fatal exception
SMP: stopping secondary CPUs |
| In the Linux kernel, the following vulnerability has been resolved:
arm64/fpsimd: Avoid clobbering kernel FPSIMD state with SMSTOP
On system with SME, a thread's kernel FPSIMD state may be erroneously
clobbered during a context switch immediately after that state is
restored. Systems without SME are unaffected.
If the CPU happens to be in streaming SVE mode before a context switch
to a thread with kernel FPSIMD state, fpsimd_thread_switch() will
restore the kernel FPSIMD state using fpsimd_load_kernel_state() while
the CPU is still in streaming SVE mode. When fpsimd_thread_switch()
subsequently calls fpsimd_flush_cpu_state(), this will execute an
SMSTOP, causing an exit from streaming SVE mode. The exit from
streaming SVE mode will cause the hardware to reset a number of
FPSIMD/SVE/SME registers, clobbering the FPSIMD state.
Fix this by calling fpsimd_flush_cpu_state() before restoring the kernel
FPSIMD state. |
| HCL Connections is vulnerable to a sensitive information disclosure vulnerability which could allow a user to obtain sensitive information they are not entitled to, caused by improper rendering of application data. |
| Unspecified vulnerability in Puppet 2.6.x before 2.6.15 and 2.7.x before 2.7.13, and Puppet Enterprise (PE) Users 1.0, 1.1, 1.2.x, 2.0.x, and 2.5.x before 2.5.1 allows remote authenticated users with agent SSL keys to (1) cause a denial of service (memory consumption) via a REST request to a stream that triggers a thread block, as demonstrated using CVE-2012-1986 and /dev/random; or (2) cause a denial of service (filesystem consumption) via crafted REST requests that use "a marshaled form of a Puppet::FileBucket::File object" to write to arbitrary file locations. |
| A flaw was found in Samba. It is susceptible to a vulnerability where multiple incompatible RPC listeners can be initiated, causing disruptions in the AD DC service. When Samba's RPC server experiences a high load or unresponsiveness, servers intended for non-AD DC purposes (for example, NT4-emulation "classic DCs") can erroneously start and compete for the same unix domain sockets. This issue leads to partial query responses from the AD DC, causing issues such as "The procedure number is out of range" when using tools like Active Directory Users. This flaw allows an attacker to disrupt AD DC services. |
| A vulnerability was found in Samba's "rpcecho" development server, a non-Windows RPC server used to test Samba's DCE/RPC stack elements. This vulnerability stems from an RPC function that can be blocked indefinitely. The issue arises because the "rpcecho" service operates with only one worker in the main RPC task, allowing calls to the "rpcecho" server to be blocked for a specified time, causing service disruptions. This disruption is triggered by a "sleep()" call in the "dcesrv_echo_TestSleep()" function under specific conditions. Authenticated users or attackers can exploit this vulnerability to make calls to the "rpcecho" server, requesting it to block for a specified duration, effectively disrupting most services and leading to a complete denial of service on the AD DC. The DoS affects all other services as "rpcecho" runs in the main RPC task. |
| A vulnerability was found in python-glance-store. The issue occurs when the package logs the access_key for the glance-store when the DEBUG log level is enabled. |
| A vulnerability was found in PAM. The secret information is stored in memory, where the attacker can trigger the victim program to execute by sending characters to its standard input (stdin). As this occurs, the attacker can train the branch predictor to execute an ROP chain speculatively. This flaw could result in leaked passwords, such as those found in /etc/shadow while performing authentications. |
| A regression was introduced in the Red Hat build of python-eventlet due to a change in the patch application strategy, resulting in a patch for CVE-2021-21419 not being applied for all builds of all products. |
| A flaw was found in the Quarkus Cache Runtime. When request processing utilizes a Uni cached using @CacheResult and the cached Uni reuses the initial "completion" context, the processing switches to the cached Uni instead of the request context. This is a problem if the cached Uni context contains sensitive information, and could allow a malicious user to benefit from a POST request returning the response that is meant for another user, gaining access to sensitive data. |
| A flaw was found in the Keylime registrar that could allow a bypass of the challenge-response protocol during agent registration. This issue may allow an attacker to impersonate an agent and hide the true status of a monitored machine if the fake agent is added to the verifier list by a legitimate user, resulting in a breach of the integrity of the registrar database. |
| A path disclosure vulnerability was found in Samba. As part of the Spotlight protocol, Samba discloses the server-side absolute path of shares, files, and directories in the results for search queries. This flaw allows a malicious client or an attacker with a targeted RPC request to view the information that is part of the disclosed path. |
| A vulnerability was found in Samba's SMB2 packet signing mechanism. The SMB2 packet signing is not enforced if an admin configured "server signing = required" or for SMB2 connections to Domain Controllers where SMB2 packet signing is mandatory. This flaw allows an attacker to perform attacks, such as a man-in-the-middle attack, by intercepting the network traffic and modifying the SMB2 messages between client and server, affecting the integrity of the data. |
| In the Linux kernel, the following vulnerability has been resolved:
net: dsa: b53: do not enable EEE on bcm63xx
BCM63xx internal switches do not support EEE, but provide multiple RGMII
ports where external PHYs may be connected. If one of these PHYs are EEE
capable, we may try to enable EEE for the MACs, which then hangs the
system on access of the (non-existent) EEE registers.
Fix this by checking if the switch actually supports EEE before
attempting to configure it. |
| In the Linux kernel, the following vulnerability has been resolved:
net: drv: netdevsim: don't napi_complete() from netpoll
netdevsim supports netpoll. Make sure we don't call napi_complete()
from it, since it may not be scheduled. Breno reports hitting a
warning in napi_complete_done():
WARNING: CPU: 14 PID: 104 at net/core/dev.c:6592 napi_complete_done+0x2cc/0x560
__napi_poll+0x2d8/0x3a0
handle_softirqs+0x1fe/0x710
This is presumably after netpoll stole the SCHED bit prematurely. |
| A flaw was found in the tracker-miners package. A weakness in the sandbox allows a maliciously-crafted file to execute code outside the sandbox if the tracker-extract process has first been compromised by a separate vulnerability. |
