| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
smb: client: avoid using uninitialized SIDs in cifs_posix_to_fattr()
cifs_posix_to_fattr() ignores the return value of posix_info_parse().
When a malformed POSIX directory entry is encountered (e.g. invalid
SID lengths from an untrusted server), posix_info_parse() returns -1
without populating the 'parsed' struct. The uninitialized stack
memory in parsed.owner and parsed.group is then passed to
sid_to_id(), which processes the garbage bytes and passes them to
request_key() to construct a SID string, potentially leaking kernel
stack contents to the userspace idmap daemon.
Fix this by checking the return value and skipping the SID-to-id
mapping when parsing fails. The remaining fattr fields (timestamps,
mode, etc.) are populated directly from the 'info' pointer so they
are unaffected. |
| In the Linux kernel, the following vulnerability has been resolved:
net: usb: pegasus: don't rely on id table pointer arithmetic
The current code is broken when dynamic ID is involved; in such cases
usb_device_id parameter of probe lives on the heap and the pointer
arithmetic will get an index that is wildly out of bound. Instead of
keeping a side table for additional information, use driver_info field of
the usb_device_id.
The dynamic ID parsing code needs to be updated for this; convert it to
just write to the reserved entry for dynamic ID and remove the weird loop. |
| In the Linux kernel, the following vulnerability has been resolved:
usb: xusbatm: don't rely on id table pointer arithmetic
The current code is broken when dynamic ID is involved; in such cases
usb_device_id parameter of probe lives on the heap and the pointer
arithmetic will get an index that is wildly out of bound. xusbatm
initialize the USB device IDs dynamically so it can just use driver_info
too.
Even with conversion, xusbatm still cannot support dynamic IDs, so also set
no_dynamic_id. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/xe: Fix null pointer dereference in devcoredump cleanup
In xe_devcoredump_snapshot_free(), ss->gt may be NULL when the snapshot
was never fully populated (e.g., when cleanup is triggered without a
prior capture). Guard the xe_guc_capture_put_matched_nodes() call with
IS_ERR_OR_NULL() to prevent a null dereference.
In xe_devcoredump_free(), the deferred work is only queued when a
coredump is captured, so guard cancel_work_sync() with a check on
coredump->captured. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: cfg80211: reject duplicate wiphy cipher suite entries
Duplicate entries in wiphy->cipher_suites do not describe any
additional capability, but cfg80211 currently accepts them and leaves
individual consumers to deal with them.
One such consumer is the WEXT compatibility code, which appends a WEP
key length for each WEP cipher entry it sees. Repeated WEP entries can
therefore overflow the fixed iw_range::encoding_size array returned by
SIOCGIWRANGE.
Reject duplicate cipher suite entries in wiphy_register() instead.
This keeps the cipher suite invariant in one place and makes malformed
wiphy descriptions fail early with -EINVAL, rather than relying on a
single cfg80211 user to handle duplicates correctly. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: nl80211: reject beacons with bad HE operation
The HE operation element not only needs to be longer than
the fixed part, but also have an appropriate size for the
variable part inside of it. Check this. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: rtw88: Add NULL check for chip->edcca_th in rtw_fw_adaptivity_result()
It was recently reported that rtw_fw_adaptivity_result()
in fw.c dereferences rtwdev->chip->edcca_th without
a NULL check. The issue is that devices with the
8821CE chip don't define edcca_th in their chip
info. As a result, when rtw_fw_adaptivity_result()
tries to dereference it, the kernel triggers an oops.
Add a NULL check for edcca_th before dereferencing
it in rtw_fw_adaptivity_result() in fw.c. Placing
the check at the function entry avoids logging any
garbage values.
This change does not address the root cause for
this behavior, but it prevents the NULL dereference
and the resulting oops while a more permanent solution
is developed.
Tested on a 8822CE chip which defines edcca_th, so
this issue is not present on it, but it still uses
this driver and I can verify there are no regressions. |
| In the Linux kernel, the following vulnerability has been resolved:
i3c: master: svc: Prevent IRQ storm from false SLVSTART on NPCM845
On NPCM845, when a target on the I3C bus gets stuck holding SDA low,
the controller reports a false Master Request (MR) in-band interrupt
event. The driver handles this by emitting a STOP condition to restore
the bus.
However, the hardware quirk SVC_I3C_QUIRK_FALSE_SLVSTART indicates that
emitting a STOP condition may spuriously set the SLVSTART interrupt
status bit. In the Master Request case, this creates a feedback loop:
the STOP triggers a new SLVSTART event, the IRQ handler fires again,
the controller still reports an MR type, another STOP is emitted, and
the cycle repeats indefinitely, resulting in an IRQ storm that can lock
up the CPU.
Clear the SLVSTART status bit explicitly after emitting the STOP in the
Master Request IBI handler when the SVC_I3C_QUIRK_FALSE_SLVSTART quirk
is set. This breaks the feedback loop without affecting normal SLVSTART
processing, which is already guarded in the top-level IRQ handler by
checking that MSTATUS is in SLVREQ state. |
| In the Linux kernel, the following vulnerability has been resolved:
spi: spi-qcom-qspi: Fix incomplete error handling in runtime PM
The runtime PM functions had incomplete error handling that could leave the
system in an inconsistent state. If any operation failed midway through
suspend or resume, some resources would be left in the wrong state while
others were already changed, leading to potential clock/power imbalances.
Reorder the suspend/resume sequences to avoid brownout risk by ensuring the
performance state is set appropriately before clocks are enabled and clocks
are disabled before dropping the performance state.
Fix by adding proper error checking for all operations and using goto-based
cleanup to ensure all successfully acquired resources are properly released
on any error. |
| In the Linux kernel, the following vulnerability has been resolved:
thunderbolt: Keep XDomain reference during the lifetime of a service
This is needed because we release the service ID in tb_service_release()
and the ID array is owned by the parent XDomain. |
| In the Linux kernel, the following vulnerability has been resolved:
crypto: ixp4xx - fix buffer chain unwind on allocation failure
chainup_buffers() builds a linked list of buffer descriptors for a
scatterlist. If dma_pool_alloc() fails while constructing the list, the
current code sets buf to NULL and later dereferences it unconditionally
at the end of the function:
buf->next = NULL;
buf->phys_next = 0;
This can lead to a null-pointer dereference on allocation failure.
If the failure happens after part of the descriptor chain has already
been allocated and DMA-mapped, the partially constructed chain also
needs to be released.
Fix this by terminating the partially constructed chain on allocation
failure and letting the callers unwind it via their existing cleanup
paths. Also fix ablk_perform() to preserve the hook pointers before
checking for failure, so partially built chains can be freed correctly. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: rtw89: phy: check length before parsing PHY status IE
Hardware might report PHY status IE with unexpected length, and parser
might access out of range. Check the length ahead. |
| In the Linux kernel, the following vulnerability has been resolved:
coresight: perf: Retrieve path and source from event data
ETM perf callbacks currently use the per-CPU csdev_src pointer, which
can race with updates during device registration and unregistration.
The AUX setup already builds and stores the path in the event data.
Use this path to retrieve the source instead of csdev_src to avoid
the race.
Export coresight_get_source() and add etm_event_get_ctxt_path() to
retrieve the context's path and its source with READ_ONCE() /
WRITE_ONCE() accessors. Give the comments to explain why this
approach is safe when pause or resume callbacks preempt the disable
callback (e.g. via NMI). |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amdgpu/userq: pin mqd and fw object bo to avoid eviction
mqd and fw objects are queue core objects which should remain
valid and never be unmapped and evicted for user queues to work
properly.
During eviction if these buffers are evicted the hw continue to
use the invalid addresses and caused page faults and system hung. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amdkfd: Fix OOB memory exposure in get_wave_state()
The get_wave_state() function for v9 trusts cp_hqd_cntl_stack_size and
cp_hqd_cntl_stack_offset values read directly from the MQD, which are
written by GPU microcode and fully attacker-controlled on the
CRIU-restore path (via AMDKFD_IOC_RESTORE_PROCESS with H3).
this leads to an unbounded copy_to_user() that can leak adjacent
GTT/kernel memory. If offset > size, integer underflow produces a ~4 GiB
read length, if size is set to 1 MiB against a 4 KiB allocation, we leak
1 MiB of adjacent kernel memory (other queues' MQDs, ring buffers, KASLR
pointers).
Fix by clamping both cp_hqd_cntl_stack_size to the actual allocated
buffer size (q->ctl_stack_size) and cp_hqd_cntl_stack_offset to the
clamped size before performing arithmetic and copy_to_user().
This ensures we never read beyond the allocated kernel BO regardless of
attacker-supplied MQD field values. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amdkfd: Check bounds on allocate_doorbell
allocated_doorbell has an option to set the doorbell id
to a specific value (used by CRIU). This value was not
bounds checked.
Check to confirm it's less than KFD_MAX_NUM_OF_QUEUES_PER_PROCESS. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amdgpu: validate and share PSP fw_pri_buf copies via psp_copy_fw
Change psp_copy_fw from void to int: return -ENODEV when drm_dev_enter
fails, and -EINVAL when the image size is zero or larger than the
1 MiB PSP private buffer.
Replace open-coded memset/memcpy into fw_pri_buf with psp_copy_fw. |
| Improper Neutralization of Special Elements used in an SQL Command ('SQL Injection') vulnerability in Crocoblock JetEngine jet-engine allows Blind SQL Injection.This issue affects JetEngine: from n/a through 3.8.9.1. |
| OpenEXR is the reference implementation and specification for the EXR image format, widely used in the motion picture industry. Versions prior to 3.2.10, 3.3.12, and 3.4.13 contain an infinite-loop vulnerability in SampleCountChannel. The helper roundListSizeUp() rounds a sample-list size up to the next power of two using repeated unsigned left shifts, which terminates for normal values but fails for UINT_MAX: the sequence reaches 0x80000000, and the next left shift wraps the 32-bit value to 0. Because 0 remains less than UINT_MAX, the loop never progresses and never exits. The bug is reachable through public OpenEXRUtil APIs, either by editing the sample-count buffer through SampleCountChannel::Edit (whose destructor calls endEdit()) or by calling SampleCountChannel::set(x, y, UINT_MAX) on a valid pixel. This issue has been fixed in versions 3.2.10, 3.3.12, and 3.4.13. |
| A flaw has been found in Frappe HR up to 16.15.0. This vulnerability affects the function get_expense_claims/get_shift_requests/get_attendance_requests of the file hrms/api/__init__.py of the component Permission Validation. This manipulation of the argument employee causes incorrect authorization. Remote exploitation of the attack is possible. The vendor replied: "This issue has already been reported by another individual, and based on that, we have fixed it." |
