| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| A weakness has been identified in vgmstream up to r2117. This issue affects the function sscanf of the file src/meta/txth.c of the component txth-txtp. This manipulation causes stack-based buffer overflow. The attack is possible to be carried out remotely. The exploit has been made available to the public and could be used for attacks. Patch name: 4669d37a6af94866f6f0628678f9f90d46954e8b. To fix this issue, it is recommended to deploy a patch. |
| A vulnerability was identified in java-json-tools json-patch up to 1.13. This affects the function CopyOperation.apply/MoveOperation.apply of the file src/main/java/com/github/fge/jsonpatch/CopyOperation.java of the component Copy Move Operations. The manipulation leads to improper access controls. Remote exploitation of the attack is possible. The exploit is publicly available and might be used. The project was informed of the problem early through an issue report but has not responded yet. |
| Gracefulness code ignored cases that should be rejected, resulting in possible HTTP Request Smuggling opportunities.
This issue affects OTP from OTP 22.2 before OTP 27.3.4.17, from OTP 28.0 before OTP 28.5.0.6, and from OTP 29.0 before OTP 29.0.6, corresponding to inets from 7.1.2 before 9.3.2.7, from 9.4 before 9.6.2.3, and from 9.7 before 9.7.2. |
| knowns versions before 0.30.0 serve the management API without authentication on all network interfaces by default, with no password required on fresh installations. Attackers can access the unauthenticated /api/tunnel/start endpoint to provision a public tunnel and republish the API at a publicly accessible address. |
| A flaw has been found in D-Link DIR-895L A1_102b07. This impacts the function sendOffer/sendACK of the file udhcpcd/serverpacket.c of the component udhcpcd. This manipulation causes stack-based buffer overflow. The attack can only be done within the local network. The exploit has been published and may be used. |
| knowns versions before 0.30.0 contain a path traversal vulnerability in the POST /api/templates/preview endpoint that allows unauthenticated attackers to read arbitrary files. Attackers can supply directory traversal sequences in the templateFile parameter to bypass path restrictions and read sensitive files like credentials and configuration through the JSON response. |
| knowns versions before 0.30.0 contain a path traversal vulnerability in the handleCodeReplace() function that allows attackers to overwrite arbitrary files outside the project root. Attackers can supply absolute paths or relative paths containing directory traversal sequences to write malicious content to sensitive files like shell startup scripts or SSH configuration files. |
| Unrestricted Upload of File with Dangerous Type vulnerability in EDGE22 Studios Ltd. GP Premium allows Remote Code Inclusion.
This issue affects GP Premium: from n/a through 2.5.5. |
| Lara Dashboard before 1.3.2 fails to authorize the MarketplaceModuleBrowser installModule Livewire action, allowing non-Superadmin administrators to install modules. Attackers can download and auto-activate arbitrary PHP modules from the marketplace over unsigned HTTP requests, achieving remote code execution. |
| Net::IP::LPM versions before 1.11 for Perl allow a heap out-of-bounds read via an unbounded prefix length.
add() passes the prefix string to the trie builder addPrefixToTrie() without checking it against the address width.
addPrefixToTrie() then walks the prefix buffer by prefix_length bits, reading prefix[byte] for byte up to prefix_len/8, where prefix is the 4-byte (IPv4) or 16-byte (IPv6) packed address. A prefix length greater than 32 for IPv4 or 128 for IPv6, for example add("1.2.3.4/255", $v) or add("2001:db8::/255", $v), reads past the end of the packed address.
The out-of-bounds read happens during trie construction and is bounded: the prefix length is stored as an unsigned char, so the bit walk reads at most 32 bytes from the start of the packed address, a short distance past the end of the 4-byte or 16-byte buffer. It is detectable under AddressSanitizer, valgrind, or a hardened allocator, where it can abort the process. Lookups and dump() format only the valid address width, so the out-of-bounds bytes are not exposed through the module's API. |
| Net::IP::LPM version 1.10 for Perl does not properly consider leading zero characters in IP CIDR address strings, which could allow attackers to bypass access control that is based on IP addresses.
Leading zeros are used to indicate octal numbers, which can confuse users who are intentionally using octal notation, as well as users who believe they are using decimal notation. |
| ImageMagick before 7.1.2-30 contains a time-of-check-time-of-use vulnerability in path policy enforcement on Windows that allows attackers to bypass read or write restrictions by exploiting symlink race conditions. Attackers can swap symlinks between policy validation and file access to read or write policy-denied files. |
| In Power HAL, there is a possible out of bounds write due to a missing bounds check. This could lead to local escalation of privilege if a malicious actor has already obtained the System privilege. User interaction is not needed for exploitation. Patch ID: ALPS11165543; Issue ID: MSV-9011. |
| Buffer Overflow vulnerability in Ffmpeg v.7.0 and after allows an attacker to cause a denial of service via the libavformat/iamf_writer.c component |
| In the Linux kernel, the following vulnerability has been resolved:
fuse: wait for FR_FINISHED on abort_on_kill to prevent use-after-free
The abort_on_kill path in request_wait_answer() calls fuse_abort_conn()
and returns without waiting for FR_FINISHED. If fuse_dev_do_write() is
concurrently processing the same request (FR_LOCKED set), the caller
frees req->args while it is still being accessed, causing a
use-after-free.
Fix this by jumping to the existing wait_event(FR_FINISHED) instead of
returning early. The wait will not hang because fuse_abort_conn()
ensures all requests are ended. |
| In the Linux kernel, the following vulnerability has been resolved:
crypto: sun8i-ce - Remove crypto_rng interface
Since the crypto_rng interface for hardware PRNGs is unused and is
redundant with hwrng and the actual Linux RNG, it's being phased out.
Most drivers for it were already removed. Go ahead and remove the
sun8i-ce support which is one of the only remaining ones.
Note that the sun8i-ce support for hwrng remains in place. That is the
interface that actually matters.
As usual for crypto_rng, this driver was also buggy: its ->generate()
function had a use-after-free vulnerability due to using
wait_for_completion_interruptible_timeout() without handling shutting
down the DMA operation if a signal is sent. There's no point in fixing
this separately only to remove the code anyway, so this commit is marked
with Fixes and Cc stable. |
| In the Linux kernel, the following vulnerability has been resolved:
crypto: sun8i-ss - Remove crypto_rng interface
Since the crypto_rng interface for hardware PRNGs is unused and is
redundant with hwrng and the actual Linux RNG, it's being phased out.
Most drivers for it were already removed. Go ahead and remove the
sun8i-ss support which is one of the only remaining ones.
As usual for crypto_rng, this driver was also buggy: its ->generate()
function had a use-after-free vulnerability due to using
wait_for_completion_interruptible_timeout() without handling shutting
down the DMA operation if a signal is sent. Also, it had a buffer
overread bug in the line 'memcpy(ctx->seed, d + dlen, ctx->slen);'.
There's no point in fixing these bugs separately only to remove the code
anyway, so this commit is marked with Fixes and Cc stable. |
| In the Linux kernel, the following vulnerability has been resolved:
ovpn: run deferred work on a module-owned workqueue
ovpn queues several work items whose callbacks execute module text.
These works currently run on the global system workqueues, so module
exit has no driver-owned drain point that guarantees the callbacks have
fully returned before the module text can be freed.
Object references protect the objects used by the callbacks, but they do
not prove that a workqueue function has returned. In particular, a
worker can drop the final reference that unblocks device teardown while
it is still executing ovpn code.
Add a module-owned workqueue and queue all ovpn work items on it. During
module exit, unregister rtnl and netlink first, flush the workqueue so
ordinary ovpn workers finish, run the final RCU barrier, and destroy the
workqueue last. This keeps the workqueue available for cleanup work
queued from RCU callbacks, while ensuring no ovpn work item can outlive
the module text.
The per-device delayed keepalive work remains explicitly disabled during
netdev teardown (disable_delayed_work_sync in ndo_uninit), since
flush_workqueue does not flush delayed work that is still only pending
on its timer. |
| In the Linux kernel, the following vulnerability has been resolved:
ptp: vmclock: prevent read-only mappings from becoming writable
vmclock_miscdev_mmap() rejects writable mappings of the shared vmclock
ABI page with -EROFS, but leaves VM_MAYWRITE set. Userspace can map the
page read-only and then upgrade it to writable with mprotect(), after
which the guest can corrupt the host-written timekeeping data (sequence
counter, UTC time, TSC offset) that the vmclock ABI defines as read-only.
Clear VM_MAYWRITE on the read-only path so the mapping cannot be
upgraded, as i915 does for its read-only objects and as fixed in drm/vc4
(CVE-2026-68445) and drm/panthor (CVE-2024-53071). |
| In the Linux kernel, the following vulnerability has been resolved:
netfs: Fix missing locking around retry adding new subreqs
Fix netfs_retry_read_subrequests() and netfs_retry_write_stream() to take
the appropriate lock when adding extra subrequests into
stream->subrequests. |
