| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
crypto: hisilicon/sec - don't sleep when in softirq
When kunpeng920 encryption driver is used to deencrypt and decrypt
packets during the softirq, it is not allowed to use mutex lock. The
kernel will report the following error:
BUG: scheduling while atomic: swapper/57/0/0x00000300
Call trace:
dump_backtrace+0x0/0x1e4
show_stack+0x20/0x2c
dump_stack+0xd8/0x140
__schedule_bug+0x68/0x80
__schedule+0x728/0x840
schedule+0x50/0xe0
schedule_preempt_disabled+0x18/0x24
__mutex_lock.constprop.0+0x594/0x5dc
__mutex_lock_slowpath+0x1c/0x30
mutex_lock+0x50/0x60
sec_request_init+0x8c/0x1a0 [hisi_sec2]
sec_process+0x28/0x1ac [hisi_sec2]
sec_skcipher_crypto+0xf4/0x1d4 [hisi_sec2]
sec_skcipher_encrypt+0x1c/0x30 [hisi_sec2]
crypto_skcipher_encrypt+0x2c/0x40
crypto_authenc_encrypt+0xc8/0xfc [authenc]
crypto_aead_encrypt+0x2c/0x40
echainiv_encrypt+0x144/0x1a0 [echainiv]
crypto_aead_encrypt+0x2c/0x40
esp_output_tail+0x348/0x5c0 [esp4]
esp_output+0x120/0x19c [esp4]
xfrm_output_one+0x25c/0x4d4
xfrm_output_resume+0x6c/0x1fc
xfrm_output+0xac/0x3c0
xfrm4_output+0x64/0x130
ip_build_and_send_pkt+0x158/0x20c
tcp_v4_send_synack+0xdc/0x1f0
tcp_conn_request+0x7d0/0x994
tcp_v4_conn_request+0x58/0x6c
tcp_v6_conn_request+0xf0/0x100
tcp_rcv_state_process+0x1cc/0xd60
tcp_v4_do_rcv+0x10c/0x250
tcp_v4_rcv+0xfc4/0x10a4
ip_protocol_deliver_rcu+0xf4/0x200
ip_local_deliver_finish+0x58/0x70
ip_local_deliver+0x68/0x120
ip_sublist_rcv_finish+0x70/0x94
ip_list_rcv_finish.constprop.0+0x17c/0x1d0
ip_sublist_rcv+0x40/0xb0
ip_list_rcv+0x140/0x1dc
__netif_receive_skb_list_core+0x154/0x28c
__netif_receive_skb_list+0x120/0x1a0
netif_receive_skb_list_internal+0xe4/0x1f0
napi_complete_done+0x70/0x1f0
gro_cell_poll+0x9c/0xb0
napi_poll+0xcc/0x264
net_rx_action+0xd4/0x21c
__do_softirq+0x130/0x358
irq_exit+0x11c/0x13c
__handle_domain_irq+0x88/0xf0
gic_handle_irq+0x78/0x2c0
el1_irq+0xb8/0x140
arch_cpu_idle+0x18/0x40
default_idle_call+0x5c/0x1c0
cpuidle_idle_call+0x174/0x1b0
do_idle+0xc8/0x160
cpu_startup_entry+0x30/0x11c
secondary_start_kernel+0x158/0x1e4
softirq: huh, entered softirq 3 NET_RX 0000000093774ee4 with
preempt_count 00000100, exited with fffffe00? |
| In the Linux kernel, the following vulnerability has been resolved:
perf/core: Handle buffer mapping fail correctly in perf_mmap()
After successful allocation of a buffer or a successful attachment to an
existing buffer perf_mmap() tries to map the buffer read only into the page
table. If that fails, the already set up page table entries are zapped, but
the other perf specific side effects of that failure are not handled. The
calling code just cleans up the VMA and does not invoke perf_mmap_close().
This leaks reference counts, corrupts user->vm accounting and also results
in an unbalanced invocation of event::event_mapped().
Cure this by moving the event::event_mapped() invocation before the
map_range() call so that on map_range() failure perf_mmap_close() can be
invoked without causing an unbalanced event::event_unmapped() call.
perf_mmap_close() undoes the reference counts and eventually frees buffers. |
| Exposure of Sensitive Information to an Unauthorized Actor vulnerability in Apache DolphinScheduler.
The information exposed to unauthorized actors may include sensitive data such as database credentials.
Users who can't upgrade to the fixed version can also set environment variable `MANAGEMENT_ENDPOINTS_WEB_EXPOSURE_INCLUDE=health,metrics,prometheus` to workaround this, or add the following section in the `application.yaml` file
```
management:
endpoints:
web:
exposure:
include: health,metrics,prometheus
```
This issue affects Apache DolphinScheduler: from 3.0.0 before 3.0.2.
Users are recommended to upgrade to version 3.0.2, which fixes the issue. |
| An improper input validation in the Security Dashboard ignored-tasks API of Devolutions Server 2025.2.15.0 and earlier allows an authenticated user to cause a denial of service to the Security Dashboard via a crafted request. |
| In the Linux kernel, the following vulnerability has been resolved:
sunrpc: fix client side handling of tls alerts
A security exploit was discovered in NFS over TLS in tls_alert_recv
due to its assumption that there is valid data in the msghdr's
iterator's kvec.
Instead, this patch proposes the rework how control messages are
setup and used by sock_recvmsg().
If no control message structure is setup, kTLS layer will read and
process TLS data record types. As soon as it encounters a TLS control
message, it would return an error. At that point, NFS can setup a kvec
backed control buffer and read in the control message such as a TLS
alert. Scott found that a msg iterator can advance the kvec pointer
as a part of the copy process thus we need to revert the iterator
before calling into the tls_alert_recv. |
| In the Linux kernel, the following vulnerability has been resolved:
tls: stop recv() if initial process_rx_list gave us non-DATA
If we have a non-DATA record on the rx_list and another record of the
same type still on the queue, we will end up merging them:
- process_rx_list copies the non-DATA record
- we start the loop and process the first available record since it's
of the same type
- we break out of the loop since the record was not DATA
Just check the record type and jump to the end in case process_rx_list
did some work. |
| In the Linux kernel, the following vulnerability has been resolved:
fs/ntfs3: cancle set bad inode after removing name fails
The reproducer uses a file0 on a ntfs3 file system with a corrupted i_link.
When renaming, the file0's inode is marked as a bad inode because the file
name cannot be deleted.
The underlying bug is that make_bad_inode() is called on a live inode.
In some cases it's "icache lookup finds a normal inode, d_splice_alias()
is called to attach it to dentry, while another thread decides to call
make_bad_inode() on it - that would evict it from icache, but we'd already
found it there earlier".
In some it's outright "we have an inode attached to dentry - that's how we
got it in the first place; let's call make_bad_inode() on it just for shits
and giggles". |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: handle jset (if a & b ...) as a jump in CFG computation
BPF_JSET is a conditional jump and currently verifier.c:can_jump()
does not know about that. This can lead to incorrect live registers
and SCC computation.
E.g. in the following example:
1: r0 = 1;
2: r2 = 2;
3: if r1 & 0x7 goto +1;
4: exit;
5: r0 = r2;
6: exit;
W/o this fix insn_successors(3) will return only (4), a jump to (5)
would be missed and r2 won't be marked as alive at (3). |
| In the Linux kernel, the following vulnerability has been resolved:
clk: spacemit: mark K1 pll1_d8 as critical
The pll1_d8 clock is enabled by the boot loader, and is ultimately a
parent for numerous clocks, including those used by APB and AXI buses.
Guodong Xu discovered that this clock got disabled while responding to
getting -EPROBE_DEFER when requesting a reset controller.
The needed clock (CLK_DMA, along with its parents) had already been
enabled. To respond to the probe deferral return, the CLK_DMA clock
was disabled, and this led to parent clocks also reducing their enable
count. When the enable count for pll1_d8 was decremented it became 0,
which caused it to be disabled. This led to a system hang.
Marking that clock critical resolves this by preventing it from being
disabled.
Define a new macro CCU_FACTOR_GATE_DEFINE() to allow clock flags to
be supplied for a CCU_FACTOR_GATE clock. |
| In the Linux kernel, the following vulnerability has been resolved:
clk: imx95-blk-ctl: Fix synchronous abort
When enabling runtime PM for clock suppliers that also belong to a power
domain, the following crash is thrown:
error: synchronous external abort: 0000000096000010 [#1] PREEMPT SMP
Workqueue: events_unbound deferred_probe_work_func
pstate: 60400009 (nZCv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--)
pc : clk_mux_get_parent+0x60/0x90
lr : clk_core_reparent_orphans_nolock+0x58/0xd8
Call trace:
clk_mux_get_parent+0x60/0x90
clk_core_reparent_orphans_nolock+0x58/0xd8
of_clk_add_hw_provider.part.0+0x90/0x100
of_clk_add_hw_provider+0x1c/0x38
imx95_bc_probe+0x2e0/0x3f0
platform_probe+0x70/0xd8
Enabling runtime PM without explicitly resuming the device caused
the power domain cut off after clk_register() is called. As a result,
a crash happens when the clock hardware provider is added and attempts
to access the BLK_CTL register.
Fix this by using devm_pm_runtime_enable() instead of pm_runtime_enable()
and getting rid of the pm_runtime_disable() in the cleanup path. |
| In the Linux kernel, the following vulnerability has been resolved:
vfio/pds: Fix missing detach_ioas op
When CONFIG_IOMMUFD is enabled and a device is bound to the pds_vfio_pci
driver, the following WARN_ON() trace is seen and probe fails:
WARNING: CPU: 0 PID: 5040 at drivers/vfio/vfio_main.c:317 __vfio_register_dev+0x130/0x140 [vfio]
<...>
pds_vfio_pci 0000:08:00.1: probe with driver pds_vfio_pci failed with error -22
This is because the driver's vfio_device_ops.detach_ioas isn't set.
Fix this by using the generic vfio_iommufd_physical_detach_ioas
function. |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: Disable migration in nf_hook_run_bpf().
syzbot reported that the netfilter bpf prog can be called without
migration disabled in xmit path.
Then the assertion in __bpf_prog_run() fails, triggering the splat
below. [0]
Let's use bpf_prog_run_pin_on_cpu() in nf_hook_run_bpf().
[0]:
BUG: assuming non migratable context at ./include/linux/filter.h:703
in_atomic(): 0, irqs_disabled(): 0, migration_disabled() 0 pid: 5829, name: sshd-session
3 locks held by sshd-session/5829:
#0: ffff88807b4e4218 (sk_lock-AF_INET){+.+.}-{0:0}, at: lock_sock include/net/sock.h:1667 [inline]
#0: ffff88807b4e4218 (sk_lock-AF_INET){+.+.}-{0:0}, at: tcp_sendmsg+0x20/0x50 net/ipv4/tcp.c:1395
#1: ffffffff8e5c4e00 (rcu_read_lock){....}-{1:3}, at: rcu_lock_acquire include/linux/rcupdate.h:331 [inline]
#1: ffffffff8e5c4e00 (rcu_read_lock){....}-{1:3}, at: rcu_read_lock include/linux/rcupdate.h:841 [inline]
#1: ffffffff8e5c4e00 (rcu_read_lock){....}-{1:3}, at: __ip_queue_xmit+0x69/0x26c0 net/ipv4/ip_output.c:470
#2: ffffffff8e5c4e00 (rcu_read_lock){....}-{1:3}, at: rcu_lock_acquire include/linux/rcupdate.h:331 [inline]
#2: ffffffff8e5c4e00 (rcu_read_lock){....}-{1:3}, at: rcu_read_lock include/linux/rcupdate.h:841 [inline]
#2: ffffffff8e5c4e00 (rcu_read_lock){....}-{1:3}, at: nf_hook+0xb2/0x680 include/linux/netfilter.h:241
CPU: 0 UID: 0 PID: 5829 Comm: sshd-session Not tainted 6.16.0-rc6-syzkaller-00002-g155a3c003e55 #0 PREEMPT(full)
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 05/07/2025
Call Trace:
<TASK>
__dump_stack lib/dump_stack.c:94 [inline]
dump_stack_lvl+0x16c/0x1f0 lib/dump_stack.c:120
__cant_migrate kernel/sched/core.c:8860 [inline]
__cant_migrate+0x1c7/0x250 kernel/sched/core.c:8834
__bpf_prog_run include/linux/filter.h:703 [inline]
bpf_prog_run include/linux/filter.h:725 [inline]
nf_hook_run_bpf+0x83/0x1e0 net/netfilter/nf_bpf_link.c:20
nf_hook_entry_hookfn include/linux/netfilter.h:157 [inline]
nf_hook_slow+0xbb/0x200 net/netfilter/core.c:623
nf_hook+0x370/0x680 include/linux/netfilter.h:272
NF_HOOK_COND include/linux/netfilter.h:305 [inline]
ip_output+0x1bc/0x2a0 net/ipv4/ip_output.c:433
dst_output include/net/dst.h:459 [inline]
ip_local_out net/ipv4/ip_output.c:129 [inline]
__ip_queue_xmit+0x1d7d/0x26c0 net/ipv4/ip_output.c:527
__tcp_transmit_skb+0x2686/0x3e90 net/ipv4/tcp_output.c:1479
tcp_transmit_skb net/ipv4/tcp_output.c:1497 [inline]
tcp_write_xmit+0x1274/0x84e0 net/ipv4/tcp_output.c:2838
__tcp_push_pending_frames+0xaf/0x390 net/ipv4/tcp_output.c:3021
tcp_push+0x225/0x700 net/ipv4/tcp.c:759
tcp_sendmsg_locked+0x1870/0x42b0 net/ipv4/tcp.c:1359
tcp_sendmsg+0x2e/0x50 net/ipv4/tcp.c:1396
inet_sendmsg+0xb9/0x140 net/ipv4/af_inet.c:851
sock_sendmsg_nosec net/socket.c:712 [inline]
__sock_sendmsg net/socket.c:727 [inline]
sock_write_iter+0x4aa/0x5b0 net/socket.c:1131
new_sync_write fs/read_write.c:593 [inline]
vfs_write+0x6c7/0x1150 fs/read_write.c:686
ksys_write+0x1f8/0x250 fs/read_write.c:738
do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline]
do_syscall_64+0xcd/0x4c0 arch/x86/entry/syscall_64.c:94
entry_SYSCALL_64_after_hwframe+0x77/0x7f
RIP: 0033:0x7fe7d365d407
Code: 48 89 fa 4c 89 df e8 38 aa 00 00 8b 93 08 03 00 00 59 5e 48 83 f8 fc 74 1a 5b c3 0f 1f 84 00 00 00 00 00 48 8b 44 24 10 0f 05 <5b> c3 0f 1f 80 00 00 00 00 83 e2 39 83 fa 08 75 de e8 23 ff ff ff
RSP: |
| In the Linux kernel, the following vulnerability has been resolved:
ipv6: add a retry logic in net6_rt_notify()
inet6_rt_notify() can be called under RCU protection only.
This means the route could be changed concurrently
and rt6_fill_node() could return -EMSGSIZE.
Re-size the skb when this happens and retry, removing
one WARN_ON() that syzbot was able to trigger:
WARNING: CPU: 3 PID: 6291 at net/ipv6/route.c:6342 inet6_rt_notify+0x475/0x4b0 net/ipv6/route.c:6342
Modules linked in:
CPU: 3 UID: 0 PID: 6291 Comm: syz.0.77 Not tainted 6.16.0-rc7-syzkaller #0 PREEMPT(full)
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.3-debian-1.16.3-2~bpo12+1 04/01/2014
RIP: 0010:inet6_rt_notify+0x475/0x4b0 net/ipv6/route.c:6342
Code: fc ff ff e8 6d 52 ea f7 e9 47 fc ff ff 48 8b 7c 24 08 4c 89 04 24 e8 5a 52 ea f7 4c 8b 04 24 e9 94 fd ff ff e8 9c fe 84 f7 90 <0f> 0b 90 e9 bd fd ff ff e8 6e 52 ea f7 e9 bb fb ff ff 48 89 df e8
RSP: 0018:ffffc900035cf1d8 EFLAGS: 00010293
RAX: 0000000000000000 RBX: ffffc900035cf540 RCX: ffffffff8a36e790
RDX: ffff88802f7e8000 RSI: ffffffff8a36e9d4 RDI: 0000000000000005
RBP: ffff88803c230f00 R08: 0000000000000005 R09: 00000000ffffffa6
R10: 00000000ffffffa6 R11: 0000000000000001 R12: 00000000ffffffa6
R13: 0000000000000900 R14: ffff888032ea4100 R15: 0000000000000000
FS: 00007fac7b89a6c0(0000) GS:ffff8880d6a20000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007fac7b899f98 CR3: 0000000034b3f000 CR4: 0000000000352ef0
Call Trace:
<TASK>
ip6_route_mpath_notify+0xde/0x280 net/ipv6/route.c:5356
ip6_route_multipath_add+0x1181/0x1bd0 net/ipv6/route.c:5536
inet6_rtm_newroute+0xe4/0x1a0 net/ipv6/route.c:5647
rtnetlink_rcv_msg+0x95e/0xe90 net/core/rtnetlink.c:6944
netlink_rcv_skb+0x155/0x420 net/netlink/af_netlink.c:2552
netlink_unicast_kernel net/netlink/af_netlink.c:1320 [inline]
netlink_unicast+0x58d/0x850 net/netlink/af_netlink.c:1346
netlink_sendmsg+0x8d1/0xdd0 net/netlink/af_netlink.c:1896
sock_sendmsg_nosec net/socket.c:712 [inline]
__sock_sendmsg net/socket.c:727 [inline]
____sys_sendmsg+0xa95/0xc70 net/socket.c:2566
___sys_sendmsg+0x134/0x1d0 net/socket.c:2620 |
| In the Linux kernel, the following vulnerability has been resolved:
pinctrl: canaan: k230: Fix order of DT parse and pinctrl register
Move DT parse before pinctrl register. This ensures that device tree
parsing is done before calling devm_pinctrl_register() to prevent using
uninitialized pin resources. |
| In the Linux kernel, the following vulnerability has been resolved:
landlock: Fix warning from KUnit tests
get_id_range() expects a positive value as first argument but
get_random_u8() can return 0. Fix this by clamping it.
Validated by running the test in a for loop for 1000 times.
Note that MAX() is wrong as it is only supposed to be used for
constants, but max() is good here.
[..] ok 9 test_range2_rand1
[..] ok 10 test_range2_rand2
[..] ok 11 test_range2_rand15
[..] ------------[ cut here ]------------
[..] WARNING: CPU: 6 PID: 104 at security/landlock/id.c:99 test_range2_rand16 (security/landlock/id.c:99 (discriminator 1) security/landlock/id.c:234 (discriminator 1))
[..] Modules linked in:
[..] CPU: 6 UID: 0 PID: 104 Comm: kunit_try_catch Tainted: G N 6.16.0-rc1-dev-00001-g314a2f98b65f #1 PREEMPT(undef)
[..] Tainted: [N]=TEST
[..] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.3-debian-1.16.3-2 04/01/2014
[..] RIP: 0010:test_range2_rand16 (security/landlock/id.c:99 (discriminator 1) security/landlock/id.c:234 (discriminator 1))
[..] Code: 49 c7 c0 10 70 30 82 4c 89 ff 48 c7 c6 a0 63 1e 83 49 c7 45 a0 e0 63 1e 83 e8 3f 95 17 00 e9 1f ff ff ff 0f 0b e9 df fd ff ff <0f> 0b ba 01 00 00 00 e9 68 fe ff ff 49 89 45 a8 49 8d 4d a0 45 31
[..] RSP: 0000:ffff888104eb7c78 EFLAGS: 00010246
[..] RAX: 0000000000000000 RBX: 000000000870822c RCX: 0000000000000000
^^^^^^^^^^^^^^^^
[..]
[..] Call Trace:
[..]
[..] ---[ end trace 0000000000000000 ]---
[..] ok 12 test_range2_rand16
[..] # landlock_id: pass:12 fail:0 skip:0 total:12
[..] # Totals: pass:12 fail:0 skip:0 total:12
[..] ok 1 landlock_id
[mic: Minor cosmetic improvements] |
| In the Linux kernel, the following vulnerability has been resolved:
RDMA/siw: Fix the sendmsg byte count in siw_tcp_sendpages
Ever since commit c2ff29e99a76 ("siw: Inline do_tcp_sendpages()"),
we have been doing this:
static int siw_tcp_sendpages(struct socket *s, struct page **page, int offset,
size_t size)
[...]
/* Calculate the number of bytes we need to push, for this page
* specifically */
size_t bytes = min_t(size_t, PAGE_SIZE - offset, size);
/* If we can't splice it, then copy it in, as normal */
if (!sendpage_ok(page[i]))
msg.msg_flags &= ~MSG_SPLICE_PAGES;
/* Set the bvec pointing to the page, with len $bytes */
bvec_set_page(&bvec, page[i], bytes, offset);
/* Set the iter to $size, aka the size of the whole sendpages (!!!) */
iov_iter_bvec(&msg.msg_iter, ITER_SOURCE, &bvec, 1, size);
try_page_again:
lock_sock(sk);
/* Sendmsg with $size size (!!!) */
rv = tcp_sendmsg_locked(sk, &msg, size);
This means we've been sending oversized iov_iters and tcp_sendmsg calls
for a while. This has a been a benign bug because sendpage_ok() always
returned true. With the recent slab allocator changes being slowly
introduced into next (that disallow sendpage on large kmalloc
allocations), we have recently hit out-of-bounds crashes, due to slight
differences in iov_iter behavior between the MSG_SPLICE_PAGES and
"regular" copy paths:
(MSG_SPLICE_PAGES)
skb_splice_from_iter
iov_iter_extract_pages
iov_iter_extract_bvec_pages
uses i->nr_segs to correctly stop in its tracks before OoB'ing everywhere
skb_splice_from_iter gets a "short" read
(!MSG_SPLICE_PAGES)
skb_copy_to_page_nocache copy=iov_iter_count
[...]
copy_from_iter
/* this doesn't help */
if (unlikely(iter->count < len))
len = iter->count;
iterate_bvec
... and we run off the bvecs
Fix this by properly setting the iov_iter's byte count, plus sending the
correct byte count to tcp_sendmsg_locked. |
| In the Linux kernel, the following vulnerability has been resolved:
platform/x86: alienware-wmi-wmax: Fix `dmi_system_id` array
Add missing empty member to `awcc_dmi_table`. |
| In the Linux kernel, the following vulnerability has been resolved:
RDMA/rxe: Flush delayed SKBs while releasing RXE resources
When skb packets are sent out, these skb packets still depends on
the rxe resources, for example, QP, sk, when these packets are
destroyed.
If these rxe resources are released when the skb packets are destroyed,
the call traces will appear.
To avoid skb packets hang too long time in some network devices,
a timestamp is added when these skb packets are created. If these
skb packets hang too long time in network devices, these network
devices can free these skb packets to release rxe resources. |
| In the Linux kernel, the following vulnerability has been resolved:
net/sched: Fix backlog accounting in qdisc_dequeue_internal
This issue applies for the following qdiscs: hhf, fq, fq_codel, and
fq_pie, and occurs in their change handlers when adjusting to the new
limit. The problem is the following in the values passed to the
subsequent qdisc_tree_reduce_backlog call given a tbf parent:
When the tbf parent runs out of tokens, skbs of these qdiscs will
be placed in gso_skb. Their peek handlers are qdisc_peek_dequeued,
which accounts for both qlen and backlog. However, in the case of
qdisc_dequeue_internal, ONLY qlen is accounted for when pulling
from gso_skb. This means that these qdiscs are missing a
qdisc_qstats_backlog_dec when dropping packets to satisfy the
new limit in their change handlers.
One can observe this issue with the following (with tc patched to
support a limit of 0):
export TARGET=fq
tc qdisc del dev lo root
tc qdisc add dev lo root handle 1: tbf rate 8bit burst 100b latency 1ms
tc qdisc replace dev lo handle 3: parent 1:1 $TARGET limit 1000
echo ''; echo 'add child'; tc -s -d qdisc show dev lo
ping -I lo -f -c2 -s32 -W0.001 127.0.0.1 2>&1 >/dev/null
echo ''; echo 'after ping'; tc -s -d qdisc show dev lo
tc qdisc change dev lo handle 3: parent 1:1 $TARGET limit 0
echo ''; echo 'after limit drop'; tc -s -d qdisc show dev lo
tc qdisc replace dev lo handle 2: parent 1:1 sfq
echo ''; echo 'post graft'; tc -s -d qdisc show dev lo
The second to last show command shows 0 packets but a positive
number (74) of backlog bytes. The problem becomes clearer in the
last show command, where qdisc_purge_queue triggers
qdisc_tree_reduce_backlog with the positive backlog and causes an
underflow in the tbf parent's backlog (4096 Mb instead of 0).
To fix this issue, the codepath for all clients of qdisc_dequeue_internal
has been simplified: codel, pie, hhf, fq, fq_pie, and fq_codel.
qdisc_dequeue_internal handles the backlog adjustments for all cases that
do not directly use the dequeue handler.
The old fq_codel_change limit adjustment loop accumulated the arguments to
the subsequent qdisc_tree_reduce_backlog call through the cstats field.
However, this is confusing and error prone as fq_codel_dequeue could also
potentially mutate this field (which qdisc_dequeue_internal calls in the
non gso_skb case), so we have unified the code here with other qdiscs. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/xe/migrate: don't overflow max copy size
With non-page aligned copy, we need to use 4 byte aligned pitch, however
the size itself might still be close to our maximum of ~8M, and so the
dimensions of the copy can easily exceed the S16_MAX limit of the copy
command leading to the following assert:
xe 0000:03:00.0: [drm] Assertion `size / pitch <= ((s16)(((u16)~0U) >> 1))` failed!
platform: BATTLEMAGE subplatform: 1
graphics: Xe2_HPG 20.01 step A0
media: Xe2_HPM 13.01 step A1
tile: 0 VRAM 10.0 GiB
GT: 0 type 1
WARNING: CPU: 23 PID: 10605 at drivers/gpu/drm/xe/xe_migrate.c:673 emit_copy+0x4b5/0x4e0 [xe]
To fix this account for the pitch when calculating the number of current
bytes to copy.
(cherry picked from commit 8c2d61e0e916e077fda7e7b8e67f25ffe0f361fc) |
