| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| An issue in D-Link COVR 1100, 1102, 1103 AC1200 Dual-Band Whole-Home Mesh Wi-Fi System (Hardware Rev B1) truncates Wireless Access Point Passwords (WPA-PSK) allowing an attacker to gain unauthorized network access via weak authentication controls. |
| There is a vulnerability in the Supermicro BMC firmware validation logic at Supermicro MBD-X13SEM-F . An attacker can update the system firmware with a specially crafted image. |
| There is a vulnerability in the Supermicro BMC firmware validation logic at Supermicro MBD-X12STW . An attacker can update the system firmware with a specially crafted image. |
| A certificate with a URI which has a IPv6 address with a zone ID may incorrectly satisfy a URI name constraint that applies to the certificate chain. Certificates containing URIs are not permitted in the web PKI, so this only affects users of private PKIs which make use of URIs. |
| xml-crypto is an XML digital signature and encryption library for Node.js. An attacker may be able to exploit a vulnerability in versions prior to 6.0.1, 3.2.1, and 2.1.6 to bypass authentication or authorization mechanisms in systems that rely on xml-crypto for verifying signed XML documents. The vulnerability allows an attacker to modify a valid signed XML message in a way that still passes signature verification checks. For example, it could be used to alter critical identity or access control attributes, enabling an attacker to escalate privileges or impersonate another user. Users of versions 6.0.0 and prior should upgrade to version 6.0.1 to receive a fix. Those who are still using v2.x or v3.x should upgrade to patched versions 2.1.6 or 3.2.1, respectively. |
| There is a vulnerability in the Supermicro BMC firmware validation logic at Supermicro MBD-X13SEM-F . An attacker can update the system firmware with a specially crafted image. |
| A vulnerability in the Image Signature Verification feature of Cisco SD-WAN Software could allow an authenticated, remote attacker with Administrator-level credentials to install a malicious software patch on an affected device.
The vulnerability is due to improper verification of digital signatures for patch images. An attacker could exploit this vulnerability by crafting an unsigned software patch to bypass signature checks and loading it on an affected device. A successful exploit could allow the attacker to boot a malicious software patch image.Cisco has released software updates that address the vulnerability described in this advisory. There are no workarounds that address this vulnerability. |
| tiny-secp256k1 is a tiny secp256k1 native/JS wrapper. Prior to version 1.1.7, a malicious JSON-stringifyable message can be made passing on verify(), when global Buffer is the buffer package. This affects only environments where require('buffer') is the NPM buffer package. Buffer.isBuffer check can be bypassed, resulting in strange objects being accepted as a message, and those messages could trick verify() into returning false-positive true values. This issue has been patched in version 1.1.7. |
| cjwt is a C JSON Web Token (JWT) Implementation. Algorithm confusion occurs when a system improperly verifies the type of signature used, allowing attackers to exploit the lack of distinction between signing methods. If the system doesn't differentiate between an HMAC signed token and an RS/EC/PS signed token during verification, it becomes vulnerable to this kind of attack. For instance, an attacker could craft a token with the alg field set to "HS256" while the server expects an asymmetric algorithm like "RS256". The server might mistakenly use the wrong verification method, such as using a public key as the HMAC secret, leading to unauthorised access. For RSA, the key can be computed from a few signatures. For Elliptic Curve (EC), two potential keys can be recovered from one signature. This can be used to bypass the signature mechanism if an application relies on asymmetrically signed tokens. This issue has been addressed in version 2.3.0 and all users are advised to upgrade. There are no known workarounds for this vulnerability. |
| rfc3161-client is a Python library implementing the Time-Stamp Protocol (TSP) described in RFC 3161. Prior to version 1.0.3, there is a flaw in the timestamp response signature verification logic. In particular, chain verification is performed against the TSR's embedded certificates up to the trusted root(s), but fails to verify the TSR's own signature against the timestamping leaf certificates. Consequently, vulnerable versions perform insufficient signature validation to properly consider a TSR verified, as the attacker can introduce any TSR signature so long as the embedded leaf chains up to some root TSA. This issue has been patched in version 1.0.3. There is no workaround for this issue. |
| Cryptographic validation of upgrade images could be circumventing by dropping a specifically crafted file into the upgrade ISO |
| Improper verification of the digital signature in ksojscore.dll in Kingsoft WPS Office in versions equal or less than 12.1.0.18276
on Windows allows an attacker to load an arbitrary Windows library. The patch released in version 12.2.0.16909 to mitigate CVE-2024-7262 was not restrictive enough. |
| This vulnerability exists in the TP-Link Archer C50 due to improper signature verification mechanism in the firmware upgrade process at its web interface. An attacker with administrative privileges within the router’s Wi-Fi range could exploit this vulnerability by uploading and executing malicious firmware which could lead to complete compromise of the targeted device. |
| OpenPGP.js is a JavaScript implementation of the OpenPGP protocol. Startinf in version 5.0.1 and prior to versions 5.11.3 and 6.1.1, a maliciously modified message can be passed to either `openpgp.verify` or `openpgp.decrypt`, causing these functions to return a valid signature verification result while returning data that was not actually signed. This flaw allows signature verifications of inline (non-detached) signed messages (using `openpgp.verify`) and signed-and-encrypted messages (using `openpgp.decrypt` with `verificationKeys`) to be spoofed, since both functions return extracted data that may not match the data that was originally signed. Detached signature verifications are not affected, as no signed data is returned in that case. In order to spoof a message, the attacker needs a single valid message signature (inline or detached) as well as the plaintext data that was legitimately signed, and can then construct an inline-signed message or signed-and-encrypted message with any data of the attacker's choice, which will appear as legitimately signed by affected versions of OpenPGP.js. In other words, any inline-signed message can be modified to return any other data (while still indicating that the signature was valid), and the same is true for signed+encrypted messages if the attacker can obtain a valid signature and encrypt a new message (of the attacker's choice) together with that signature. The issue has been patched in versions 5.11.3 and 6.1.1. Some workarounds are available. When verifying inline-signed messages, extract the message and signature(s) from the message returned by `openpgp.readMessage`, and verify the(/each) signature as a detached signature by passing the signature and a new message containing only the data (created using `openpgp.createMessage`) to `openpgp.verify`. When decrypting and verifying signed+encrypted messages, decrypt and verify the message in two steps, by first calling `openpgp.decrypt` without `verificationKeys`, and then passing the returned signature(s) and a new message containing the decrypted data (created using `openpgp.createMessage`) to `openpgp.verify`. |
| The OpenSAML C++ library before 3.3.1 allows forging of signed SAML messages via parameter manipulation (when using SAML bindings that rely on non-XML signatures). |
| sigstore-java is a sigstore java client for interacting with sigstore infrastructure. sigstore-java has insufficient verification for a situation where a validly-signed but "mismatched" bundle is presented as proof of inclusion into a transparency log. This bug impacts clients using any variation of KeylessVerifier.verify(). The verifier may accept a bundle with an unrelated log entry, cryptographically verifying everything but fails to ensure the log entry applies to the artifact in question, thereby "verifying" a bundle without any proof the signing event was logged. This allows the creation of a bundle without fulcio certificate and private key combined with an unrelated but time-correct log entry to fake logging of a signing event. A malicious actor using a compromised identity may want to do this to prevent discovery via rekor's log monitors. The signer's identity will still be available to the verifier. The signature on the bundle must still be on the correct artifact for the verifier to pass. sigstore-gradle-plugin and sigstore-maven-plugin are not affected by this as they only provide signing functionality. This issue has been patched in v1.1.0 release with PR #856. All users are advised to upgrade. There are no known workarounds for this vulnerability. |
| Improper fingerprint validation in the TeamViewer Client (Full & Host) prior Version 15.54 for Windows and macOS allows an attacker with administrative user rights to further elevate privileges via executable sideloading. |
| Quest KACE Systems Management Appliance (SMA) 13.0.x before 13.0.385, 13.1.x before 13.1.81, 13.2.x before 13.2.183, 14.0.x before 14.0.341 (Patch 5), and 14.1.x before 14.1.101 (Patch 4) allows unauthenticated users to upload backup files to the system. While signature validation is implemented, weaknesses in the validation process can be exploited to upload malicious backup content that could compromise system integrity. |
| A potential vulnerability was reported in the Lenovo 510 FHD and Performance FHD web cameras that could allow an attacker with physical access to write arbitrary firmware updates to the device over a USB connection. |
| An insufficiently secured internal function allows session generation for arbitrary users. The decodeParam function checks the JWT but does not verify which signing algorithm was used. As a result, an attacker can use the "ex:action" parameter in the VerifyUserByThrustedService function to generate a session for any user. |
