| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| The The Plus Addons for Elementor – Addons for Elementor, Page Templates, Widgets, Mega Menu, WooCommerce plugin for WordPress is vulnerable to Insufficient Verification of Data Authenticity in all versions up to, and including, 6.4.7. This is due to the plugin decrypting and trusting attacker-controlled email_data in an unauthenticated AJAX handler without cryptographic authenticity guarantees. This makes it possible for unauthenticated attackers to tamper with form email routing and redirection values to trigger unauthorized email relay and attacker-controlled redirection via the 'email_data' parameter. |
| Rack::Session is a session management implementation for Rack. From 2.0.0 to before 2.1.2, Rack::Session::Cookie incorrectly handles decryption failures when configured with secrets:. If cookie decryption fails, the implementation falls back to a default decoder instead of rejecting the cookie. This allows an unauthenticated attacker to supply a crafted session cookie that is accepted as valid session data without knowledge of any configured secret. Because this mechanism is used to load session state, an attacker can manipulate session contents and potentially gain unauthorized access. This vulnerability is fixed in 2.1.2. |
| The Rede Itaú for WooCommerce plugin for WordPress is vulnerable to order status manipulation due to insufficient verification of data authenticity in all versions up to, and including, 5.1.2. This is due to the plugin failing to verify the authenticity of payment callbacks. This makes it possible for unauthenticated attackers to manipulate WooCommerce order statuses, either marking unpaid orders as paid, or failed. |
| User interface (ui) misrepresentation of critical information in Microsoft Exchange Server allows an unauthorized attacker to perform spoofing over a network. |
| Same-origin policy bypass in the Networking: JAR component. This vulnerability was fixed in Firefox 148, Firefox ESR 140.8, Thunderbird 148, and Thunderbird 140.8. |
| The Fluent Forms Pro Add On Pack plugin for WordPress is vulnerable to Insufficient Verification of Data Authenticity in all versions up to, and including, 6.1.17. This is due to the PayPal IPN (Instant Payment Notification) verification being disabled by default (`disable_ipn_verification` defaults to `'yes'` in `PayPalSettings.php`). This makes it possible for unauthenticated attackers to send forged PayPal IPN notifications to the publicly accessible IPN endpoint, marking unpaid form submissions as "paid" and triggering post-payment automation (emails, access grants, digital product delivery). |
| Same-origin policy bypass in the CSS Parsing and Computation component. This vulnerability was fixed in Firefox 148.0.2. |
| MCP Java SDK is the official Java SDK for Model Context Protocol servers and clients. Prior to 1.0.0, the java-sdk contains a DNS rebinding vulnerability. This vulnerability allows an attacker to access a locally or network-private java-sdk MCP server via a victims browser that is either local, or network adjacent. This allows an attacker to make any tool call to the server as if they were a locally running MCP connected AI agent. This vulnerability is fixed in 1.0.0. |
| Inappropriate implementation in PDF in Google Chrome prior to 147.0.7727.55 allowed a remote attacker to bypass navigation restrictions via a crafted HTML page. (Chromium security severity: Low) |
| When calling base64.b64decode() or related functions the decoding process would stop after encountering the first padded quad regardless of whether there was more information to be processed. This can lead to data being accepted which may be processed differently by other implementations. Use "validate=True" to enable stricter processing of base64 data. |
| Cosign provides code signing and transparency for containers and binaries. Prior to 3.0.6 and 2.6.3, cosign verify-blob-attestation may erroneously report a "Verified OK" result for attestations with malformed payloads or mismatched predicate types. For old-format bundles and detached signatures, this was due to a logic flaw in the error handling of the predicate type validation. For new-format bundles, the predicate type validation was bypassed completely. This vulnerability is fixed in 3.0.6 and 2.6.3. |
| Go ShangMi (Commercial Cryptography) Library (GMSM) is a cryptographic library that covers the Chinese commercial cryptographic public algorithms SM2/SM3/SM4/SM9/ZUC. Prior to 0.41.1, the current SM9 decryption implementation contains an infinity-point ciphertext forgery vulnerability. The root cause is that, during decryption, the elliptic-curve point C1 in the ciphertext is only deserialized and checked to be on the curve, but the implementation does not explicitly reject the point at infinity. In the current implementation, an attacker can construct C1 as the point at infinity, causing the bilinear pairing result to degenerate into the identity element in the GT group. As a result, a critical part of the key derivation input becomes a predictable constant. An attacker who only knows the target user's UID can derive the decryption key material and then forge a ciphertext that passes the integrity check. This vulnerability is fixed in 0.41.1. |
| OpenPGP.js is a JavaScript implementation of the OpenPGP protocol. Startinf in version 5.0.1 and prior to versions 5.11.3 and 6.1.1, a maliciously modified message can be passed to either `openpgp.verify` or `openpgp.decrypt`, causing these functions to return a valid signature verification result while returning data that was not actually signed. This flaw allows signature verifications of inline (non-detached) signed messages (using `openpgp.verify`) and signed-and-encrypted messages (using `openpgp.decrypt` with `verificationKeys`) to be spoofed, since both functions return extracted data that may not match the data that was originally signed. Detached signature verifications are not affected, as no signed data is returned in that case. In order to spoof a message, the attacker needs a single valid message signature (inline or detached) as well as the plaintext data that was legitimately signed, and can then construct an inline-signed message or signed-and-encrypted message with any data of the attacker's choice, which will appear as legitimately signed by affected versions of OpenPGP.js. In other words, any inline-signed message can be modified to return any other data (while still indicating that the signature was valid), and the same is true for signed+encrypted messages if the attacker can obtain a valid signature and encrypt a new message (of the attacker's choice) together with that signature. The issue has been patched in versions 5.11.3 and 6.1.1. Some workarounds are available. When verifying inline-signed messages, extract the message and signature(s) from the message returned by `openpgp.readMessage`, and verify the(/each) signature as a detached signature by passing the signature and a new message containing only the data (created using `openpgp.createMessage`) to `openpgp.verify`. When decrypting and verifying signed+encrypted messages, decrypt and verify the message in two steps, by first calling `openpgp.decrypt` without `verificationKeys`, and then passing the returned signature(s) and a new message containing the decrypted data (created using `openpgp.createMessage`) to `openpgp.verify`. |
| Catalyst::Plugin::Session before version 0.44 for Perl generates session ids insecurely.
The session id is generated from a (usually SHA-1) hash of a simple counter, the epoch time, the built-in rand function, the PID and the current Catalyst context. This information is of low entropy. The PID will come from a small set of numbers, and the epoch time may be guessed, if it is not leaked from the HTTP Date header. The built-in rand function is unsuitable for cryptographic usage.
Predicable session ids could allow an attacker to gain access to systems. |
| A vulnerability has been identified within Rancher Manager whereby the SAML authentication from the Rancher CLI tool is vulnerable to phishing attacks. The custom authentication protocol for SAML-based providers can be abused to steal Rancher’s authentication tokens. |
| eGovFramework/egovframe-common-components versions up to and including 4.3.1 includes Web Editor image upload and related file delivery functionality that uses symmetric encryption to protect URL parameters, but exposes an encryption oracle that allows attackers to generate valid ciphertext for chosen values. The image upload endpoints /utl/wed/insertImage.do and /utl/wed/insertImageCk.do encrypt server-side paths, filenames, and MIME types and embed them directly into a download URL that is returned to the client. Because these same encrypted parameters are trusted by other endpoints, such as /utl/web/imageSrc.do and /cmm/fms/getImage.do, an unauthenticated attacker can abuse the upload functionality to obtain encrypted representations of attacker-chosen identifiers and then replay those ciphertext values to file-serving APIs. This design failure allows an attacker to bypass access controls that rely solely on the secrecy of encrypted parameters and retrieve arbitrary stored files that are otherwise expected to require an existing session or specific authorization context. KISA/KrCERT has identified this unpatched vulnerability as "KVE-2023-5281." |
| Dovecot accepts dot LF DOT LF symbol as end of DATA command. RFC requires that it should always be CR LF DOT CR LF. This causes Dovecot to convert single mail with LF DOT LF in middle, into two emails when relaying to SMTP. Dovecot will split mail with LF DOT LF into two mails. Upgrade to latest released version. No publicly available exploits are known. |
| An issue in KIA Seltos vehicle instrument cluster with software and hardware v1.0 allows attackers to cause a Denial of Service (DoS) via ECU reset UDS service. NOTE: this is disputed by the Supplier because the findings came from a potentially unrealistic test environment (an isolated ECU part that was not in a vehicle), and because the ECUReset specification does not allow a manufacturer to require SecurityAccess and Authentication. |
| A vulnerability exists in the too permissive HTTP response header web server settings of the SDM600. An attacker can take advantage of this and possibly carry out privileged actions and access sensitive information. |
| tiny-secp256k1 is a tiny secp256k1 native/JS wrapper. Prior to version 1.1.7, a malicious JSON-stringifyable message can be made passing on verify(), when global Buffer is the buffer package. This affects only environments where require('buffer') is the NPM buffer package. Buffer.isBuffer check can be bypassed, resulting in strange objects being accepted as a message, and those messages could trick verify() into returning false-positive true values. This issue has been patched in version 1.1.7. |
