| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
LoongArch: Add DIRECT_MAP_PHYSMEM_END definition
get_free_mem_region() and mhp_get_pluggable_range() bound their search
to DIRECT_MAP_PHYSMEM_END. LoongArch does not define it, so the fallback
in include/linux/mm.h applies: under CONFIG_SPARSEMEM_VMEMMAP it is
(1ULL << MAX_PHYSMEM_BITS) - 1, a compile-time constant that does not
adapt to the CPU's physical address space bits (cpu_pabits, probed from
CPUCFG1).
The vmemmap window only covers physical space below 2^(cpu_pabits+1)
(i.e. VMEMMAP_SIZE), so on CPUs with fewer physical address bits than
MAX_PHYSMEM_BITS the fallback allows get_free_mem_region() to return
a ZONE_DEVICE region outside the vmemmap window; vmemmap_populate() then
wraps the memmap range around and maps it into low memory, silently
corrupting the page tables. The same search also picked the top-of-
address-space region that crashed memmap_init_zone_device() with amdkfd
on Loongson-3C6000 in 6.16 [1]; the commit 2969b42c8f99 ("LoongArch/mm:
align vmemmap to maximal folio size") keeps that region in bounds on
current Loongson-3C6000 configs, but CPUs with smaller cpu_pabits (e.g.
the Loongson-2K series) are still affected.
Define DIRECT_MAP_PHYSMEM_END as the vmemmap-covered physical range,
(1ULL << (cpu_pabits + 1)) - 1, capped at (1ULL << MAX_PHYSMEM_BITS) - 1
under CONFIG_SPARSEMEM, similar to the commit f3336b48cf9d ("riscv: mm:
Define DIRECT_MAP_PHYSMEM_END").
[1] https://lore.kernel.org/amd-gfx/20250814032153.227285-1-jeffbai@aosc.io/ |
| In the Linux kernel, the following vulnerability has been resolved:
nfsd: add missing read barrier to rpc_status_get dumpit seqcount retry
The hand-rolled seqcount-like protocol in nfsd_nl_rpc_status_get_dumpit()
is missing a read memory barrier (smp_rmb) before its second counter
check. The standard kernel read_seqcount_retry() includes smp_rmb()
to ensure that all data reads complete before the counter is re-checked.
Without this barrier, on weakly-ordered architectures (ARM, POWER),
the CPU may reorder field reads past the second counter check, making
the retry logic ineffective: it could observe a consistent counter pair
while reading fields that have been concurrently modified by the writer.
Add smp_rmb() before the second counter check to order the field reads
ahead of it, matching the barrier semantics of the standard seqcount
read-side. The begin-side smp_load_acquire() already pairs with the
smp_store_release() in nfsd_dispatch(); with the smp_rmb() now ordering
the field reads, the retry check no longer needs acquire semantics and
reads the counter with a plain READ_ONCE(), as read_seqcount_retry()
does.
[ cel: Use READ_ONCE instead of smp_load_acquire() ] |
| In the Linux kernel, the following vulnerability has been resolved:
svcrdma: Reject Write/Reply chunks with segcount 0
A peer can send a Write or Reply chunk whose segcount field is zero.
xdr_check_write_chunk() only rejects segcount > rc_maxpages, so zero
passes the range check, and xdr_inline_decode(stream, 0) returns the
current (non-NULL) cursor without advancing. The function returns
true and pcl_alloc_write() then links a struct svc_rdma_chunk with
ch_segcount == 0 onto rc_write_pcl or rc_reply_pcl.
An earlier patch in this series made pcl_for_each_segment() safe for
ch_segcount == 0, so this no longer drives the memory walk it used
to. Rejecting the malformed frame at the decode boundary is still
worthwhile as defense in depth: it keeps degenerate zero-segment
chunks off the parsed chunk lists entirely, so any future consumer
that walks ch_segments directly cannot observe one, and it makes the
zero-floor easy to backport to trees where the macro change is more
intrusive. RFC 8166 has no meaning for a Write/Reply chunk that
describes no remote buffer, so no legitimate client is affected.
xdr_check_reply_chunk() funnels Reply chunks through
xdr_check_write_chunk() and inherits the same rejection.
pcl_alloc_write() also links each chunk onto the parsed chunk list
before filling its segment array. If a future change weakens the
segcount-0 rejection, an incomplete chunk is visible to consumers
during the fill loop. Reorder so that list_add_tail() follows the
segment fill loop, ensuring only fully-populated chunks appear on
the list. |
| In the Linux kernel, the following vulnerability has been resolved:
phy: fsl-imx8mq-usb: fix typec switch leak on probe error path
If probe fails after imx95_usb_phy_get_tca() succeeds, the typec
switch leaks because the only cleanup path was in .remove(), which
never runs on probe failure.
Use devm_add_action_or_reset() so the switch is cleaned up on both
probe failure and driver removal. The imx95_usb_phy_put_tca() is no
longer needed, it will be removed in .remove() too. |
| In the Linux kernel, the following vulnerability has been resolved:
svcrdma: Fix unmatched rn_unregister on failed accept
When svc_rdma_accept() takes the errout path before
rpcrdma_rn_register() has succeeded, the existing cleanup block
calls rpcrdma_rn_unregister(dev, &newxprt->sc_rn) unconditionally.
svcxprt_rdma is kzalloc'd, so on that path sc_rn.rn_index is 0 and
sc_rn.rn_done is NULL; the unregister therefore xa_erase()s another
caller's slot 0 and performs an unmatched kref_put() on the
rpcrdma_device's rd_kref.
The same errout also brackets the cleanup with svc_xprt_get()/
svc_xprt_put() around the kref_init() birth reference. The kref
goes 1 -> 2 -> 1 and never reaches 0, so the svcxprt_rdma (and the
net/ns_tracker it pinned) is leaked on every failed accept.
rpcrdma_rn_register() writes rn->rn_done last, only after xa_alloc()
and kref_get() have both succeeded, so rn_done == NULL is a natural
"never registered" sentinel. Guard rpcrdma_rn_unregister() with an
early return when rn_done is NULL, and clear rn_done before the
matching xa_erase() so a repeated unregister is also a no-op.
With that guard in place, the accept errout drops the kref_init()
birth reference via svc_xprt_put(), which dispatches svc_rdma_free().
Teardown of sc_qp, sc_sq_cq, sc_rq_cq, and sc_pd runs under existing
IS_ERR/NULL guards in svc_rdma_free(); sc_rn is covered by the new
rn_done sentinel; sc_cm_id is non-NULL on every errout path because
svc_rdma_accept() dereferences it above the first goto errout.
svc_xprt_free() drops the module reference associated with the freed
transport, and svc_handle_xprt() drops its pre-acquired reference
when ->xpo_accept() returns NULL. Take a replacement module reference
before svc_xprt_put() so the two module_put()s remain balanced.
The rn_done guard also covers svc_rdma_free()'s non-listener call
to rpcrdma_rn_unregister() for transports whose register attempt
failed or never ran. |
| In the Linux kernel, the following vulnerability has been resolved:
nfsd: convert nfsd_net boolean flags to unsigned long flags word
nfsd_net contains several boolean fields that are accessed from
concurrent contexts without serialization. In particular,
nfsd4_end_grace() guards its drain path with a plain bool:
if (nn->grace_ended)
return;
nn->grace_ended = true;
The read and the write are independent, and nothing in struct
nfsd_net serializes them. At least two contexts can reach this
code with no lock held:
laundromat path
laundry_wq kworker
nfs4_laundromat()
nfsd4_end_grace()
RECLAIM_COMPLETE path
nfsd compound kthread
nfsd4_reclaim_complete()
inc_reclaim_complete()
nfsd4_end_grace()
Both callers can observe grace_ended == false on different CPUs,
both store true, and both proceed into nfsd4_record_grace_done(),
which invokes the active client_tracking_ops->grace_done callback.
For tracking ops that drain reclaim_str_hashtbl (legacy_tracking_ops
via nfsd4_recdir_purge_old, and the cld v1+ ops via
nfsd4_cld_grace_done), grace_done calls nfs4_release_reclaim(),
which walks every bucket of reclaim_str_hashtbl with no lock and
calls nfs4_remove_reclaim_record() (list_del + kfree) on each
entry. Two concurrent walkers corrupt the list and double-free
every nfs4_client_reclaim. A concurrent nfsd4_find_reclaim_client()
iterating the same bucket reads through freed memory.
A third call site exists in nfs4_state_start_net() on the
skip_grace startup path, but it runs under nfsd_mutex before any
client has connected and before the laundromat's first delayed
work fires, so it cannot race with the two callers above.
Replace the scattered boolean fields in nfsd_net with a single
unsigned long flags word and an enum nfsd_net_flag for the bit
positions. The grace_ended race is fixed by using
test_and_set_bit(), which is atomic on all architectures. The
remaining flags (grace_end_forced, in_grace, somebody_reclaimed,
track_reclaim_completes, nfsd_net_up, lockd_up) are converted to
use test_bit/set_bit/clear_bit for consistency. This avoids
sub-word cmpxchg issues on architectures like Hexagon that only
support word-sized atomic operations. |
| In the Linux kernel, the following vulnerability has been resolved:
SUNRPC: Zero rpc_gss_wire_cred at svcauth_gss_decode_credbody() entry
svcauth_gss_decode_credbody() writes the caller's
rpc_gss_wire_cred field by field and assigns gc_ctx.len only on
the success tail. The caller storage is svcdata->clcred, which
lives in the per-svc_rqst gss_svc_data and is reused across
requests. Early decode failures leave partially decoded state
mixed with residue from the prior request.
The trailing body_len tightness check is the sharpest case:
xdr_stream_decode_opaque_inline() has already written gc_ctx.data
with a borrowed inline pointer into the current request's XDR
pages, but gc_ctx.len retains its prior value. Once the request
pages are released the pooled clcred carries a dangling pointer
paired with a stale length.
Zero the caller's rpc_gss_wire_cred at function entry so that
every early-return path leaves a deterministic all-zero cred.
On the trailing tightness-check path, gc_ctx.len is now zero
instead of stale, which neuters length-driven consumers such as
gss_svc_searchbyctx() that would otherwise walk the dangling
data pointer. |
| In the Linux kernel, the following vulnerability has been resolved:
net: au1000: move free_irq out of the close-time spinlocked section
au1000_close() calls free_irq() while aup->lock is still held with
spin_lock_irqsave(). free_irq() can sleep because it takes the IRQ
descriptor request mutex, so it does not belong inside the close-time
spinlocked section.
This was found by our static analysis tool and then confirmed by manual
review of the in-tree au1000_close() .ndo_stop path. The reviewed path
keeps aup->lock held across the MAC reset, queue stop and
free_irq(dev->irq, dev).
A directed runtime validation kept that ndo_stop carrier and the same
free_irq(dev->irq, dev) operation under the driver lock. Lockdep reported
"BUG: sleeping function called from invalid context" and "Invalid wait
context" while free_irq() was taking desc->request_mutex, with
au1000_close() and free_irq() on the stack.
Drop aup->lock before freeing the IRQ. The protected close-time work still
stops the device and queue before IRQ teardown, but the sleepable IRQ core
path now runs outside the spinlocked section. |
| In the Linux kernel, the following vulnerability has been resolved:
PCI: mediatek: Protect root bus removal with rescan lock
Hold the pci_rescan_remove_lock lock while stopping and removing a root bus
to avoid racing with concurrent rescan or hotplug operations triggered via
sysfs. Such races may lead to use-after-free issues or system crashes.
[bhelgaas: commit log] |
| Dell ThinOS 10, versions prior to SecurityAddon_2605.10.2766_T10, contains an Improper Certificate Validation vulnerability. An unauthenticated attacker with adjacent network access could potentially exploit this vulnerability, leading to Protection mechanism bypass and Unauthorized access. |
| In the Linux kernel, the following vulnerability has been resolved:
PCI: rockchip: Protect root bus removal with rescan lock
Hold the pci_rescan_remove_lock lock while stopping and removing a root bus
to avoid racing with concurrent rescan or hotplug operations triggered via
sysfs. Such races may lead to use-after-free issues or system crashes.
[bhelgaas: commit log] |
| In the Linux kernel, the following vulnerability has been resolved:
spi: Add NULL check for spi_get_device_id() in spi_get_device_match_data()
Prevent NULL pointer dereference when spi_get_device_id() returns NULL,
which can happen when using driver_override without matching SPI ID entry. |
| In the Linux kernel, the following vulnerability has been resolved:
ASoC: rockchip: rockchip_pdm: Handle runtime PM resume failures in set_fmt
rockchip_pdm_set_fmt() calls pm_runtime_get_sync() before accessing
hardware registers, but ignores its return value.
If the runtime resume fails, the function continues to perform register
accesses while the device state is undefined.
Replace pm_runtime_get_sync() with pm_runtime_resume_and_get() and
return early on failure to avoid unpowered register accesses. |
| In the Linux kernel, the following vulnerability has been resolved:
btrfs: balance: fix potential bg lookup failure in btrfs_may_alloc_data_chunk()
[BUG]
Running btrfs balance can trigger a null-ptr-deref before relocating a
data chunk when metadata corruption leaves a chunk in the chunk tree
without a corresponding block group in the in-memory cache:
KASAN: null-ptr-deref in range [0x0000000000000088-0x000000000000008f]
RIP: 0010:btrfs_may_alloc_data_chunk+0x40/0x1c0 fs/btrfs/volumes.c:3601
Call Trace:
__btrfs_balance fs/btrfs/volumes.c:4217 [inline]
btrfs_balance+0x2516/0x42b0 fs/btrfs/volumes.c:4604
btrfs_ioctl_balance fs/btrfs/ioctl.c:3577 [inline]
btrfs_ioctl+0x25cf/0x5b90 fs/btrfs/ioctl.c:5313
...
[CAUSE]
__btrfs_balance() iterates the on-disk chunk tree and passes the chunk
logical bytenr to btrfs_may_alloc_data_chunk() before relocating a data
chunk. That helper then queries the in-memory block group cache:
cache = btrfs_lookup_block_group(fs_info, chunk_offset);
chunk_type = cache->flags; /* cache may be NULL */
A corrupt image can contain a chunk item whose matching block group
item is missing, so no block group is ever inserted into the cache. In
that case btrfs_lookup_block_group() returns NULL.
The code only guards this with ASSERT(cache), which becomes a no-op when
CONFIG_BTRFS_ASSERT is disabled. The subsequent dereference of
cache->flags therefore crashes the kernel.
[FIX]
Add a NULL check after btrfs_lookup_block_group() in
btrfs_may_alloc_data_chunk() and print and error message for clarity. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amdgpu/pm: fix SmartShift bias sysfs store PM refcount on parse error
Return the parse error before acquiring PM access. |
| IBM Concert 1.0.0 through 3.0.0 references or accesses memory after it has been freed. This allows an attacker who can influence program execution or input may exploit this condition to corrupt memory, cause application crashes, or execute arbitrary code. |
| IBM Concert 1.0.0 through 3.0.0 allows an unauthenticated remote attacker can supply specially crafted input that is incorporated into OS commands, resulting in arbitrary command execution on the underlying system. Successful exploitation allows remote code execution with the privileges of the affected application. |
| In the Linux kernel, the following vulnerability has been resolved:
ALSA: es18xx: check control allocation before private data setup
snd_es18xx_mixer() creates controls with snd_ctl_new1() and then stores
bookkeeping pointers or sets private_free before calling snd_ctl_add().
snd_ctl_new1() can return NULL on allocation failure, so those writes
can dereference a NULL control pointer.
Check the returned control pointers before using them and return -ENOMEM
on allocation failure. |
| In the Linux kernel, the following vulnerability has been resolved:
net: dsa: sja1105: flower: reject cross-chip redirect
dsa_port_from_netdev() may return a valid port from a different switch
chip. Programming another chip's port index into the local hardware
causes redirection to the wrong port, or an out-of-bounds access if the
index exceeds the local chip's port count.
Apply a minimal fix that adds a check to catch this case and adjusts the
extack message. When cls->common.skip_sw is not set, the operation could
instead redirect to the upstream port and let the software or upstream
switch(es) handle the forward, but that is not addressed here. |
| In the Linux kernel, the following vulnerability has been resolved:
net: qrtr: fix node refcount leak on ctrl packet alloc failure
qrtr_send_resume_tx() calls qrtr_node_lookup() which takes a
reference on the returned node. If the subsequent call to
qrtr_alloc_ctrl_packet() fails due to memory allocation failure, the
function returns -ENOMEM without calling qrtr_node_release() to
release the node reference.
Add qrtr_node_release(node) before returning on the allocation failure
path to properly release the reference. |
